Newest Mac Pro does NOT work with CC14 - Will Adobe address this or not?

I have a Mac Pro late 2013 - the "trash can" - and when I tried installing Premiere CC14, it crashed multiple times before even completing the program's initial bootup. I had to install CS6 just to get operable, though this does not help me open the CC14 projects I have inherited. I have a colleague who uses a $1.5K laptop, and it works logarithmically faster and better with CC14 than my $4K new Mac Pro. I have all the Adobe permissions set to "Read/Write" and it shows absolutely no speed improvements over a much less expensive iMac. The CUDA feature is worthless unless Adobe develops a way for it to take advantage of the hardware configuration of the Mac Pro... And I'm having a hard time finding anything resembling an official statement suggesting this is anywhere close to a reality. I have many After Effects plug ins, and while yes: They are 3rd party plug ins, these are not just electives - They are part of my arsenal that my loyal clients have come to expect.
For 15 years I have used After Effects, Photoshop and Illustrator, all 15 of them on a Mac. In all that time I have NEVER experienced this kind of vagueness, finger pointing, and dodgy avoidance. There seems to be an allergy to making an announcement that anything resembling a coordinated effort is going to happen.
Why would I buy "the fastest" Mac if Adobe didn't work with it? MAC STORE staff didn't seem to think this was going to be an issue... Yet I can't find any official date as to when CC14 is projected to work with AMD architecture.
I'm feeling a lot like I did when Mac juked us with FCP-7 to FCP-X "upgrade.' Et tu, Adobe?
-JOHN BEYER
(PS - Yes I had Adobe Creative Cloud assistance help me troubleshoot)

No offense meant, but did you come here to ask for help, or are you just complaining? Because it seems an awful lot like the latter...
AlphaJB4 wrote:
I have a colleague who uses a $1.5K laptop, and it works logarithmically faster and better with CC14 than my $4K new Mac Pro.
So does CC2014 work on your Mac Pro or not? The laptop doesn't "work logarithmically faster..." than your Mac Pro if the software isn't working to begin with. Hyperbole, much?
The CUDA feature is worthless unless Adobe develops a way for it to take advantage of the hardware configuration of the Mac Pro...
CUDA isn't available on the new Mac Pro. OpenCL is. If you have the CUDA preference panel installed due to another piece of software putting it there, you're better served by deleting it. It's not going to help you at all on the new Mac. It may, in fact, cause problems.
Pr CC2014 works fine with OpenCL on the new Mac. Ae doesn't, but Adobe has never said Ae does or would. Anything you do in Ae is going to be CPU-bound. If Pr is crashing, then it likely means you have something else on your system that's mucking things up. Did you recover your user directory with something like Time Machine when you installed your new Mac? Was your user directory originally on some other Mac? What happens if you create an entirely new user from scratch, without restoring the home directory, and then try to kick Pr into gear? Does it run?
Provide some details and perhaps someone can help.

Similar Messages

I recently left my computer at a hospital by mistake. I have find my phone app and then noticed that app also works for ipad and mac. Does it work with Snow Leopard?

I recently left my computer at a hospital by mistake. I have find my phone app and then noticed that app also works for ipad and mac. Does it work with Snow Leopard?

No.
The iCloud services require 10.7.5, or higher.

HT1222 I have an iPhone and new iPad. Epost mail will not open on my devices. Epost says Safari is not compatible with epost. Please address this issue. It is most annoying.

I have an iPhone and new iPad. Epost mail will not open on my devices. Epost says Safari is not compatible with epost. Please address this issue. It is most annoying.

Hello:
You need to contact "epost." The issue is not an Apple issue....the epost software needs, I assume, to be updated.
Barry

New Mac Pro Won't Work With Old Studio Display

Hi,
Just got a new Mac Pro Desktop 8-core only to find out my old Apple Studio Display 17" won't work without a $100 adapter. We're thinking of just buying a new monitor instead. My question is will other brands now work direclty with the new Macs - or would they also need adapters? Is a DVI port the same as a DVI-D port?
Thanks for any info...

Thanks so much for the response, Malcolm, I really appreciate it! My old monitor is an LCD, but what we decided to do is since the adapter we found (and HAD to get from Apple directly) was going to cost $99!! We went and bought a brand new Dell monitor instead for $238 - it's fully compatible with the new Mac, and it's 23" (my old one was a 17") - so all's good!
Thanks again,
Jacki

Will the Mac Pro 2,1 work with Mountain Lion

I have read recently that Mac Pro 1,1 will not be compatilble with Mountain Lion but what about the
Model 2,1(8 core 3Ghz Xenon)?
RJ

yes its a terrible decision apple have made to drop all these early macpros...
they waffle about lack of hardware compatibility
but in actual fact its just an arbitary decission to save some cash, and streamline developement at the users great expense..
there are an awfull lot of people waking up to the fact that their bullet proof,capable, multicore machines have been made effectively obsolete
shame on apple

Wifi not working with iTunes, apps store and some, but not all Internet sites....why???

Yesterday I noticed while browsing Internet that some sites would not open and that some games I regularly play would not open. I also found that I could not open either the apps store or iTunes. Everything seemed to be working the day before and I have not recently upgraded ios (been on version 6.1.3 for a while) or changed any settings on my iPad (2). With Internet research today I found suggestion that if I switched to 3G I would be able to access these apps and,sure enough, under 3G connection everything works fine. Some other forums suggest changing wifi router settings to fix the issue ....I have not tried this as I wouldn't like to mess with my router and end up effecting other peripherals/pc's connected to it that are working fine....especially when I am not terribly IT savvy when it comes to hardware settings. But as I haven't changed anything on my ipad why would my wifi suddenly stop connecting to some apps on my iPad, but not all??? Interestingly I can access many Internet sites (forums) with wifi connection but not the apple forum! To get to anything apple related I have to switch back to 3G ....that includes checking the iOS version I am on via settings!
I also mention that I have done all the other suggested fixes found on various forums, such as rebooting iPad, renewing wifi lease, clearing cookies, closing all apps etc etc, to no avail. Seems the only suggested fix I have not tried is mucking around with my router which I am very hesitant to do given the **** I went through with my telco when my home Internet connection suddenly stopped working last year. Took me weeks of phone calls to get my internet connection back and being forced by the telco to a more expensive plan, hence very reluctant to start mucking around with that side of things, but why should I need to when it does seem to be working ok with other devices in the home?
I have started this as new discussion as, even though I am not terribly IT savvy, I cant see how this could be related to the wifi issues that many on the newer devices (iPhone 5 and iPad mini etc) are reporting as I haven't recently upgraded anything on my ipad and all was working perfectly up until yesterday.
Any other suggestions on how to get wifi working correctly again on iPad or do I really have to risk the working of every other device in my home and chase it from modem/router side?

Hi there,
You mentioned that you have tried a few troubleshooting steps already, but you may want to take a look at the article below, specifically the section titled "If you are unable to access the Internet while connected to a Wi-Fi network"
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Hope that helps,
Griff W.

Secure boot not working with MSI Z77a-G45 And system reserve not showing

Ok so i re did my windows after i did a zero fill on my hard drive as it was showing a corrupted sector on my disk that seemed to fix it for now, until it comes back if it does crossing my fingers it gone for good. But now i can't seem to get Secure boot to work i mean i did not have it before as i just slapped the motherboard in with a existing windows, that was to be expected but this is a clean install of windows 8.1 and i even have secure boot on but its not working and reports as off in windows. Is it because i have my bios set to legacy+UEFI??? would that make secure boot not work??. i even went as far as turning it off and back on again the secure boot setting nothing made a difference. I mean its not a big deal bit would be nice to know why its not working, also another wired thing and i will post pictures of it, as i cant see my system reserved partition in disk management but diskpart says it there, i will post those pictures any ideas??.

fixed it is my legacy+uefi another forum got back to me.

Hp smart web printing does not work on firefox. HP says this is not their problem and to contact Mozilla. Is there a plug in available?

I just bought a new hp printer. the software has a feature called HP web smart printing. The feature works on explorer but not on Firefox. HP says this is not their problem and suggested I contact Mozilla. Is an add on available and if not will one be made available.
I am using v. 3.6.13. and the printer is HP Officejet 4500.

HP smart web printing is an application that only works with IE. In spite of what HP have told you, if they want their application to work with Firefox they will need to make a version for Firefox. It is not down to Mozilla to make a version of the HP software for Firefox.

My Digital personal is not working with 12, will there be a fix?

I just upgraded to 12 and it is not completable with DigitalPersona Personal. Will there be a fix or can i go back to an old version? I just went back as far as 7 but still not working.

It appears that DigitalPersona Personal has been discontinued:
[http://www.digitalpersona.com/help/personal/ http://www.digitalpersona.com/help/personal/]
"As of April 26th, 2010, DigitalPersona Personal is no longer available for sale through the DigitalPersona web site. "
Running old versions of Firefox is not recommended as they are highly vulnerable to security holes. You should always run Firefox 12 or later. I would try to either contact your OEM if they shipped DigitalPersona with your computer, or try to find a replacement. It is likely that with the ending of sales, the company stopped releasing updates.

Apple TV not working with new softwear iOS 7, Apple TV not working with new softwear iOS 7

Since updated softwear on iPad to 7.0 Apple TV not working?

I had a similar issue, without the actual error message. If you can't get it running at all, you will be forced to do what I, and many others have done over the past 24 hours. You can restore your Apple TV to factory settings (you will then have to enter your ID, passwords, etc., to connect everything again--sigh--) by obtianing a Micro-USB cable (found one today at Best Buy for 5 bucks, available other places that sell electronics, etc.) disconnect your Apple TV, and connect it via the micro usb cable (which attaches in the back of the ATV) to your computer, plug the ATV power cord into the wall and open iTUnes. You can click the Apple TV on the left side of iTunes and click restore--it will not take too long on a decent internet connection, and it will automatically install the software update (you have no choice on this, BTW, you can't go back to the previous software, as Apple only supplies the new software online (sadly). Your ATV 3 should work and you can put it back to your TV and re-enter all your info and enjoy the new features. But if you are like me, you won't enjoy AirPlay, something seems to be wrong with that if you use an iPhone or iPad and have updated to IOS7--not sure which is the problem, or both, but be prepared for a little more frustration, but at least your ATV 3 will "work" mostly as it did before.
I hope this helps, it is frustrating, but it is resolveable with a little bit of time--not that I'm happy about it, either.

Arrow key scrolling not working with advanced search- Adobe Reader X

I'm using adobe reader X and when I get results from an advanced search I am scrolling down the search results with the arrow keys, but the document will not update. I know this will work. Can anybody please help?

I am also having this problem. Previous installations of Acrobat X allowed me to use the up and down arrows to navigate the search results, but no longer loads the appropriate page in the document. I have to click each entry or hit the enter key after using the down arrows to update the page.

Once firefox is opened my mac pro lap top starts to rev very high. This has not happen before. And I lost all my tabs from the last session. Has this been a problem recently and how can I solve it? I am trying to avoid my system crashing.

firefox is working my system too hard and the system is revving very high.
== This happened ==
Every time Firefox opened
== today ==
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

Does this start right when you start firefox or after you've loaded some pages? Are there specific pages that cause this problem?

Why Skype APPs did not work with 5.0, Why Skype APPs did not work with 5.0, Why Skype APPs did not work with 5.0

After I update my iPhone to with ups 5 Skype has no function anymore. What could be the problem?

It takes a while to get apps updated. Most of these developers do the same apps for other devices and it just takes a while. It's not an excuse, but just a reason.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Mail app not working with iCloud, new emails and recently sent not showing at all in the app.

I've been using the iCloud mail for quite some time now

A lot of people have been unable to access Yahoo e-mail on their iPhones or iPads. My wife’s iPad was not downloading Yahoo mail, although her iPhone was. Both used IOS 8.2. We tried deleting the account several times and troubleshooting all of the other settings. The problem appears to have been that allowing the IOS to automatically create the account on the iPad resulted in the wrong settings for the incoming server. The following procedure, pieced together from two websites, fixed the problem for us. So far, so good.
https://portal.smartertools.com/kb/a2659/configure-imap-for-iphone-or-ipad.aspx
https://help.yahoo.com/kb/mobile-mail/imap-server-settings-sln4075.html
On the iPhone, tap Settings.
Tap Mail, Contacts, Calendars.
Tap your Yahoo account, then delete it.
Tap Add Account.
Tap Other.
Tap Add Mail Account.
Complete the Name, Address (email address), Password and Description fields.
Click Next.
Ensure IMAP is selected.
Enter the following incoming mail server information:
Incoming Mail (IMAP) Server - Requires SSL
Server: imap.mail.yahoo.com
Port: 993
Requires SSL: Yes
Hostname is mail.yahoo.com.
Username is your full email address
Password is the same password used to access webmail.
Enter the following outgoing mail server information:
Outgoing Mail (SMTP) Server - Requires SSL
Server: smtp.mail.yahoo.com
Port: 465 or 587
Requires SSL: Yes
Requires authentication: Yes
Username is your full email address
Password is the same password used to access webmail. It may have been entered for you.
Tap Next.
The iPhone will establish an SSL connection to your IMAP and SMTP servers.
That’s all!

Motion blur track not working with me on adobe premiere cc update

i've updated my adobe premiere cc on my imac. i can't see the shape button or the play button on my effects if i want to use motion track blur or mosaic or any of effects on adobe premiere cc.
help me please!!!

i have adobe premiere cc v7.2.2
updated yesterday. still i can't see the play and shape button in my effects. as fast blur.

Newest Mac Pro does NOT work with CC14 - Will Adobe address this or not?

Similar Messages

Maybe you are looking for