Newest Macbook won't turn on after sleep mode

I have the 17" Macbook Pro I guess the base model (?), bought in september of 2012. I turned it on today perfectly fine for about a half an hour. I closed the screen just like I would any other time normally but just now when I opened it back up it won't turn back on. I tried the power button several times but nothing, the power is fine since it's plugged in with the green light on. I don't understand what is going on... help!

http://support.apple.com/kb/PH11080
http://support.apple.com/kb/PH11096
maybe there is some help here

Similar Messages

  • 8560w Wireless Radio won't turn on after sleep mode

    Anyone know the fix for the 8560w not turning on it's WiFi radio post sleep mode.  It doesn't happen everytime, but most of the time.  I will be at my workstation and when I close the lid, go to my meeting and turn it back on the wireless is off and I have to go to the "Windows Mobility Center" to turn it back on.
    Any ideas or thoughts would be greatly appreciated.
    Thanks!

    Hi:
    What model wireless adapter is in your notebook?
    Maybe a driver update will help.
    Paul

  • Turn on! My mac won't turn on after sleeping!

    Ever had a problem where your computer won't turn on after sleeping for a few minutes? (I've discovered that too many downloads cause this) Anyway... have you ever tried pushing the power button for one second? Try it! It's been working for me! Hope this helped!
    (If it still won't turn on, try typing in letters randomly for one minute. Just type anything like: asdjhas)

    Try resetting the SMC and PRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
      About NVRAM and PRAM

  • Memory RAM upgrade won't wake up after sleep mode

    i just recently purchase a pair  16GB RAM of crucial  CT2K8G3S160BM for newegg.com. Yeesterday i try put this on my macbook i7 intel 2.9 processor that crucial said is compatible. but found out everything was good until i close my mac lid for hibernate. What happen is, it won't wake up no matter what i do until a way of reset SMC. BTW i try stick by stick to plug in together with my original 4gb RAM together found out 1 was ok and other one was not. But somehow why the info of hardware show that memory ram 16GB was installed and was OK. Everything was run smooth even booting. The only problem is won't wake up after sleep mode. I already try reset smc, pram, delete startimage, delete powermanagement.file and also sudo hibernate 0-7. Did anyone had this same issue of me. I'm my curiousity will it be the bad ram or software problem.

    i just google around and found this two both crucial ram. Both spec are the same but different model no.
      CT102464BF160B 16GB  and mine is CT2K8G3S160BM are this 2 same? but both same spec.
    http://www.bhphotovideo.com/c/product/877010-REG/Crucial_Technology_CT102464BF16 0B_16GB_2_x.html
    http://www.bhphotovideo.com/c/product/889298-REG/Crucial_CT2K8G3S160BM_16GB_2x8_ 204P_SODIMM.html

  • Macbook pro runs really slow after sleep mode

    My MBP ( MacBook Pro (13-inch, medio 2012), 2,5 GHz Intel Core i5, 8 GB 1600 MHz DDR3, Intel HD Graphics 4000 1024 MB), runs very slow after sleep mode. I notice that when I wake it up, my memory usage is nearly 8 GB. After a restart it is back no a normal level, between 2 and 5 GB depending on how many programs I am running. Any ideas what causes this? My IOS is Yosemite 10.10.2
    Kind regards

    Hi Japib
    Thanks for your reply. Here is my report:
    Problem description:
    macbook pro is really slow after sleep mode
    EtreCheck version: 2.1.8 (121)
    Report generated 4 februari 2015 20:56:34 CET
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Mid 2012) (Technical Specifications)
        MacBook Pro - model: MacBookPro9,2
        1 2.5 GHz Intel Core i5 CPU: 2-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1600 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 172
    Video Information: ℹ️
        Intel HD Graphics 4000
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 1:36:41
    Disk Information: ℹ️
        APPLE HDD TOSHIBA MK5065GSXF disk0 : (500,11 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 498.88 GB (292.17 GB free)
                Encrypted AES-XTS Unlocked
                Core Storage: disk0s2 499.25 GB Online
        MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Computer, Inc. IR Receiver
        Apple Inc. FaceTime HD Camera (Built-in)
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Library/Application Support/Hotspot Shield
        [not loaded]    com.anchorfree.tun (1.0.1) [Click for support]
            /Library/Application Support/Kaspersky Lab/KAV/Bases/Cache
        [loaded]    com.kaspersky.kext.kimul.44 (44) [Click for support]
        [loaded]    com.kaspersky.kext.mark.1.0.5 (1.0.5) [Click for support]
            /Library/Extensions
        [loaded]    com.kaspersky.kext.klif (3.0.4a41) [Click for support]
        [loaded]    com.kaspersky.nke (1.6.4a15) [Click for support]
            /System/Library/Extensions
        [loaded]    com.hzsystems.terminus.driver (4) [Click for support]
        [not loaded]    com.olympus.CamBlockCommandsDeviceUP (3.1.0 - SDK 10.6) [Click for support]
        [not loaded]    com.roxio.BluRaySupport (1.1.6) [Click for support]
        [not loaded]    com.sony.driver.prs2 (1.0.3d1) [Click for support]
        [not loaded]    com.wacom.kext.pentablet (5.3.3 - SDK 10.8) [Click for support]
            /Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
        [not loaded]    com.roxio.TDIXController (2.0) [Click for support]
    Launch Agents: ℹ️
        [running]    com.epson.Epson_Low_Ink_Reminder.launcher.plist [Click for support]
        [failed]    com.epson.esua.launcher.plist [Click for support] [Click for details]
        [running]    com.epson.eventmanager.agent.plist [Click for support]
        [running]    com.kaspersky.kav.gui.plist [Click for support]
        [not loaded]    com.sony.ReaderDesktop.RunReaderDesktop.plist [Click for support]
        [not loaded]    com.trusteer.rapport.rapportd.plist [Click for support]
        [running]    com.wacom.pentablet.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.anchorfree.ajaxserver.plist [Click for support]
        [running]    com.kaspersky.kav.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [running]    com.trusteer.rooks.rooksd.plist [Click for support]
        [loaded]    com.tunnelbear.mac.tbeard.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
        [running]    com.spotify.webhelper.plist [Click for support]
        [loaded]    com.valvesoftware.steamclean.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Programma  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        Documenten    Map  (/Users/[redacted]/Documents)
        uTorrent    UNKNOWN  (missing value)
        BambooCore    UNKNOWN  (missing value)
        BambooCore    UNKNOWN  (missing value)
        BambooCore    UNKNOWN  (missing value)
        BambooCore    UNKNOWN  (missing value)
        BambooCore    UNKNOWN  (missing value)
    Internet Plug-ins: ℹ️
        JavaAppletPlugin: Version: Java 7 Update 60 Check version
        WacomNetscape: Version: 2.1.0-1 - SDK 10.8 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 [Click for support]
        AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.296 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        Flash Player: Version: 16.0.0.296 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
        AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
        MeetingJoinPlugin: Version: Unknown - SDK 10.6 [Click for support]
    User internet Plug-ins: ℹ️
        Google Earth Web Plug-in: Version: 7.1 [Click for support]
    Safari Extensions: ℹ️
        AdBlock
        DuckDuckGo
        Save to Pocket
        Awesome Screenshot
        URL Advisor
        Virtual Keyboard
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Squeezebox  [Click for support]
        Trusteer Endpoint Protection  [Click for support]
    Time Machine: ℹ️
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 498.88 GB Disk used: 206.70 GB
        Destinations:
            My Passport [Local]
            Total size: 999.83 GB
            Total number of backups: 17
            Oldest backup: 2013-11-06 17:55:38 +0000
            Last backup: 2014-10-14 11:30:39 +0000
            Size of backup disk: Adequate
                Backup size 999.83 GB > (Disk used 206.70 GB X 3)
    Top Processes by CPU: ℹ️
            15%    mds
             5%    WindowServer
             0%    ocspd
             0%    fontd
             0%    kav
    Top Processes by Memory: ℹ️
        223 MB    kav
        198 MB    Safari
        155 MB    Mail
        137 MB    mds_stores
        77 MB    WindowServer
    Virtual Memory Information: ℹ️
        3.45 GB    Free RAM
        3.05 GB    Active RAM
        1.11 GB    Inactive RAM
        974 MB    Wired RAM
        1.64 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Feb 4, 2015, 07:21:16 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/EPSON Software Updater Agent_2015-02-04-192116_[redacted].crash
        Feb 4, 2015, 07:18:08 PM    Self test - passed
    Hope this will shed some light on the problem.

  • Monitor won't wake up after sleep mode

    Does anyone know how to fix the monitor, so it starts up after sleep mode? When my computer comes out of sleep mode the monitor doesn't always come on. Does anyone else have this problem and do you know the cause? The computer is only a few months old and hadn't had any problems.
    Thanks,
    Shaneil

    Well my solution may not be the most cientific one but it works for me (at least until the real solution comes to the public)...
    My computer has the problem that when it goes to sleep mode she never comes back... but it the screen that does not comes back... all the system is workin in behind (its like the brightness level was set on the less power possible) so i had to turn off the computer and had to do for a long time some times i had to wait that the computer cooled off a little and then try again to turn it on... I some tried things that the support page of apple said it could be... but did worked out... i dont know i think is a problem over 2 factors...
    1. heating (the screen generates to many heat but, TO MANY!)
    2. tiger os the OS "sleep mode" (it knows that the screen its heating a lot and tries to go to sleep to prevent over heating and damage)
    So based on this i tried conecting a external monitor to the computer while she was unable to "awake" (or to show some thing in the screen)... and it worked whit no problem at all... so my conclusion was to prevent the over heating (1st factor) and the sleep mode (2nd factor)... so I deactivated the sleep mode setting up the computer to a never sleep mode... and to prevente the over heating well I use a low bright and when i need more brightness (to se the colors of what im doing or some thing like that) I use high brightness... when I away I set the brightness level to no brightness so there is no over heat and no sleep mode (cus if it is deactivated and it over heats it will go to sleep anyway...
    Soooooo....
    1. deactivate Sleep mode...
    2. Activate a Screen saver...
    3. And remember to contro your brightness your self... and turn it off when you are not using your computer...
    well i hope it works for some body :P cya...

  • Screen won't turn on after sleep for newest macbook pro (Feb 26 2011)

    Hi!
    I just bought the 13' Macbook Pro with an 2.7GHz dual-core i7 processor and 500GB of space, the $1500 model. I am having a problem with the screen and I am wondering if I should be worried about it or if anyone else has noticed it. If it continues, I will have to take it into the store and see if I can get it fixed.
    My macbooks screen will not turn on after it falls asleep for a long period of time. The first night I had this computer, it was playing music and I turned the screen brightness all the way down/off and then I fell asleep. The energy settings were set so that the computer would fall asleep after 20 minutes. Pathfinder, F.lux and iTunes were the only application running at the time. When I woke up the next morning, the light on the computer's side indicating it was asleep was slowly fading in and out (as expected). I hit some keys on the keyboard and the keyboards backlighting turned on after a few seconds.
    But the screen did not turn on. I tried adjusting the screen brightness on the keyboard and nothing happened. After a few minutes, I held down the power button and heard the computer turn off. I turned the computer back on, AND THE SCREEN LOOKED VERY STRANGE. I could see part of iTunes fragmented/segmented into 5 or 6 sections across the screen. There were also strange lines going across the screen. It looked kind of like a leftover image of iTunes that could be solved with a screen refresh. I turned off my computer again and turned it back on about two more times, and then the screen would simple just not turn on.
    As I was packing up to go to the Apple Store, I tried one more time to turn my computer on and the screen was working fine. This was yesterday, and for the rest of the day the computer seemed to work fine. However, I don't think I let my computer fall asleep all day yesterday because I was using it so much.
    Basically the same thing happened this morning when I woke up, except to a lesser degree. My computers screen was unresponsive after keyboard input, but I was able to get music to play from my speakers. I restarted it and it seems to be working fine. I didn't see the screen do that weird fragmentation thing this time.
    I think something about the sleep function is interfering with my computer's screen. Or perhaps Pathfinder or F.lux have something to do with it. F.lux, by the way, is a application that turns the screen a dark yellowish at night to help your eyes. But I have friends that use this application and I myself have used it for a while and we have never had this problem. Then again, none of them have a 13 inch with an i7.
    Does anyone know about this problem and have advice that would save me a trip to the Apple store?
    thanks!

    Bad news and good news. The bad news is that it happened again this morning. The good news is that I finally found something interesting in the console log, at the exact second my clock is stuck when the machine is failing to wake from sleep:
    3/10/11 7:33:53 AM kernel WaitForStamp: Overflowed waiting for stamp 0x32b5d on Blit ring: called from wait for blt buffer (2D blt)
    3/10/11 7:33:53 AM kernel timestamp = 0x32b5c
    3/10/11 7:33:53 AM kernel ** Debug info for apparent hang in Blit graphics engine **
    3/10/11 7:33:53 AM kernel ring head = 0x000013b0, wrap count = 0x 0
    3/10/11 7:33:53 AM kernel ring tail = 0x00001f58 ring control = 0x00003401 enabled, auto report disabled, not waiting, semaphore is waiting, length = 0x004 4KB pages
    3/10/11 7:33:53 AM kernel timestamps = 0x32b5c
    3/10/11 7:33:53 AM kernel Semaphore register values:
    3/10/11 7:33:53 AM kernel VRSYNC: (0x12044) = 0x0
    3/10/11 7:33:53 AM kernel BRSYNC: (0x22040) = 0x0
    3/10/11 7:33:53 AM kernel RVSYNC: (0x 2040) = 0x0
    3/10/11 7:33:53 AM kernel BVSYNC: (0x22044) = 0x0
    3/10/11 7:33:53 AM kernel RBSYNC: (0x 2044) = 0x0
    3/10/11 7:33:53 AM kernel VBSYNC: (0x12040) = 0x0
    3/10/11 7:33:53 AM kernel trying to clear semaphore wait on Blit ring
    3/10/11 7:33:53 AM kernel After attempt to clear semaphor wait = 0x00003001 no longer waiting
    3/10/11 7:33:53 AM kernel kIPEHR: 0x1800001
    3/10/11 7:33:53 AM kernel kINSTDONE: 0xffffffff
    3/10/11 7:33:53 AM kernel kINSTDONE_1: 0x3fffffff
    From when the problem apparently starts (some point in the night while my machine is idle and supposedly asleep) until when I discover it and reboot the machine, I get dozens or hundreds of the above messages. Now somebody just needs to figure out what that means and stop it from happening...

  • E320 - wireless won't turn on after sleep

    When i open lid after my laptop goes to sleep after i close it, wireless won't turn on (brand new laptop).
    I fresh installed win7 x64 (with SP1 and all updates), all drivers and updates from lenovo page (power management, windows update "Enabling Wake on LAN from Standby for ENERGY STAR Version 4.0 for Windows 7", etc.....). I unchecked "allow the computer to turn off this device to save power" on wifi driver...
    Bios is very small - didn't found stuff like "wake on lan", "flash over lan", etc.
    In PROset/Wireless tool->Diagnose, it says Radio test-radio off....
    Need little help
    Solved!
    Go to Solution.

    denied wrote:
    So, if anybody have similiar problem - try that
    If you could mark the post you consider to have helped lead you to finding the solution as the solution this will help other members experiencing the same or similar hopefully find it quicker when using the forum search function.
    [Click on Options, top right of the relevant post, and select Accept as Solution]
    edit; for clarity
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Yoga Tablet 2 10 1051 Windows 8.1 Frozen - Won't turn on after sleep

    I combined several threads where customers report that after their Yoga Tablet 2 10 1051 tablet goes into sleep mode, it does not come out of it immediately when the power button is tapped.
    I am investigating these reports, and will provide updates as this investigation develops.
    Thank you,
    3/9/15 EDIT: Moved to front of discussion for escalation purposes. Amy_Lenovo
    Amy Tupper
    Technical Resolution Lead, Pervasive Issues
    Lenovo US
    ThinkPad T431s, S3 Yoga 14, Helix, Edge 11 & 14, E431, IdeaTab A1107, IdeaPad A1-07, IdeaCentre Horizon, Yoga Tablet 2 10 1051
    First computer was a 1980 Commodore 64 from Radio Shack/ GEnie SFRT member from 1993-1996
    Solved!
    Go to Solution.

    After tablet goes to sleep due to no use it wont turn on back when pressin power button. Agterv some time (could be hours) and multiply presses on power button it turns on for some reason. Can't really figure out any preconditions ore sequences. But it happens almost every time it stays in sleeep mode for a long time, which is extremely annoying as tablet can't be use same moment when it is needed.

  • Macbook won't turn on after trying to install windows

    Guys, I'm really desperate here.. I was installing Windows XP on my friend's macbook pro and it suddenly turned off (it didn't have much battery left).. then we tried to turn the macbook on again it just won't turn of.. we press the power button and nothing happens
    can someone help me here please?

    Did you re-charge it fully? How do you go about installing software or doing something else important and not being connected to live power?

  • Airport won't turn on after sleep

    Recently purchased 2 new imacs(1-24", 1-20"). They are both having the same problem. When I wake them up from a powersave sleep the airport is turned off. This wouldn't be a problem except it wont turn back on. If I click to turn it on it doesn't do anything at all. If I go to assist me -> diagnostics it just says scanning... but never does anything else. The only way I can get back up and running is a restart. This is a problem because I run software that needs to send a backup to the server on shutdown. I have temporarily set the powersave up to 3 hours, but I would much rather fix the problem than work around it.

    Hi, When the computer goes into sleep mode, it is like shutting it down, in that it halts any and all processes.
    Because nothing is happening until it wakes back up, that is why Entourage won't get it's mail. MSN will disconnect whenever the computer is put to sleep (or more annoyingly, whenever it damned feels like it).
    So yes, this is normal behaviour with sleep mode, and the only workaround I know of is to not have the computer sleep. (But the monitor can always turn off, and the hard drives spin down.)

  • MacBook won't "wake up" from sleep mode since downloading Mavericks.

    I have a 2008 MacBook and since downloading Mavericks, I've had a lot of issues when the computer is in "sleep mode." There are many times where it won't wake up and just remains a black screen. I'm forced to shut it down and turn it back on. When I do this, I have to login and it reloads everything I had had opened when it was put into sleep mode. Help! Thanks.

    I have the same issue with my Macbook Pro 2.4
    Have you by any chance installed a new RAM?. I've just added new 8 GB RAMs & I noticed the issue afterwards, but I'm still not sure if it's the cause.

  • Screen won't wake up after sleep mode

    I bought the new Macbook Air 13" a month ago, and I got a problem with my screen display recently. This is the second time in a week. It went to sleep mode and when i opened the lid, the screen was still black as usual and no matter what i pressed (I tried touching and clicking the track pad as well), nothing happened. So i ended up pressing down the power button to restart it. The only thing I could do was to report this problem as it just turned unresponsive after the sleep mode.
    Has anyone encountered the same problem as I did?

    I'm having this exact same issue with my wife's 11" MacBook Air (July 2011) we just bought it last weekend and she's frustrated with the issue.
    I have none of these issues with my 13" MacBook Pro (March 2011) which frustrates her even more, she wanted the Air because of the portability, but she's not very happy with this issue.
    I imagine if it were a bug with Lion it would be present on my MacBook Pro, right? so I can only think is a firmware issue.
    Hope Apple releseas a fix very soon!
    Message was edited by: juandg

  • Need help macbook won't come out of sleep mode

    Please help I have had my macbook since may of 2006 and this is my first real problem with it.
    I basically been loading videos to watch and then downloading some of the videos,once the process had been started I would leave to allow the videos to load/download but when I come back I find the macbook in a state of sleep and the only way that I can think of to getit out of this is to shut it down and reboot.
    This is my first mac and up until now I was quite impressed so please help to not soil the good Apple name.
    13" Macbook   Mac OS X (10.4.10)  

    I'm a newbie so I might not answer your question, but if you leave the macbook open and it goes to sleep, then you just have to press the power button and it should turn back on. I always thought though that if you let it sleep, then you won't be able to download anything because the computer disconnects from the internet during sleep. Am I right? Lol, now I'm asking the questions.

  • MacBook Air wireless connection problem after sleep mode

    Hello guys,
    My MacBook Air have problems to connect back to my wireless after comming back from sleep mode. It needs few minutes until it finds again the network.
    Does anyone have the same problem or better, a solution to this?

    Hello there TheTomcat,
    I would recommend the Solution section of our article Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6 found here http://support.apple.com/kb/HT4628?viewlocale=en_US
    Symptom: The network connection drops unexpectedly
    Your Mac may not not stay connected to your Wi-Fi network reliably.
    Your Mac may stop accessing the Internet during use.
    Solution
    Additional Information
    If your symptom is not listed, or the above steps do not resolve the issue, you can search on the Apple Support site or contact AppleCare for further assistance.
    All the very best,
    Sterling

Maybe you are looking for

  • Session state and item values

    Hi, Is it any possibility to bring the session state and an item value to a table? Thank you

  • Install network card on solaris 8 x86 10/1

    Hi how can I install my netwoek card on solaris 8 x86 Thank a lot

  • Short dump in procedure PREPARE_NAVIGATION

    Hi all, I´m having troubles running my first FPM application. I downloaded the 'FPM for WebDynpro application' manual offered in the Home page of SDN (http://www.sdn.sap.com/irj/sdn). I followed every step without any error, until the 'test' applicat

  • Transparency with jpeg images

    Apologies if this is a dumb question; I can't seem to find the answer to it. Basically, I'm importing a JPEG image and I want to ignore a certain color when I draw the image. I want to skip over any pixel with that color so that whatever was there be

  • I cant find(map) some data types

    Hello! I am doing some test using a Access and SQL Server databases in order to do the mapping of the data types that is offered using the "sun.jdbc.odbc.JdbcOdbcDriver" ,I am using jdk1.3 I have not downloaded any other driver . The thing is that I