Newly activated Dep Areas-How values computed

Hi Gurus,
We have just activated a new Dep area 61. This area 61 is a difference from 01 and 60 Areas.
We just noticed that the ordinary depreciation for area 61 started only for Period 4 amounting to 15.56. Period 01 to 3 is not there. In Area 01, The dep amount was scattered to 3.89 and it seems that the 15.56 is the dep value for 4 periods (Pd 1 to 4 which is 3.89 x 4 = 15.56).
Is this the way it behave.?
Can i perform adjustment only for Area 61?

Hi Pankaj,
We activated Area 60 for Period 4. And Yes, this seems to be a catch-up menthod.   But the thing is.. user is complaining that they need to adjust value in Area 61.
Ex.
Area 01                          Area 60               Area 61 Derived Dep area (01 - 60)
Pd. 1     =     -3.89           none                   None
Pd. 2     =     -3.89           none                   None
Pd 3     =     -3.89           none                   None
Pd. 4     =     -3.89           -15.56                 -11.67
Pd. 5     =     -3.89           -3.89                   None
Pd. 6     =     -3.89           -3.89                    None
Now the question is... they are insisting that Area 61 needs to be adjusted and reflect zero due to audit purposes.
Area 61 is derived dep area coming from Area 01 and Area 60.    If i perform adjustment, this will not allow.
Please help.

Similar Messages

Activated dep area not visible in AS03

Hi,
I have create an asset with AS01. Then I activated a deprecition area. When I enterd in AS03 I didn't see the dep ared already activated. If I create now a new asset, I can view this dep area, but in the old one I can't see it. Can anybody tell me how can I see this dep area in the asset created before activating this dep area?
Thanks.
Regards,
Sorin

Dear members of this forum,
please have a look at rules of engagement:
Do not ask for points - This forum should be firstly about information exchange; points are an incentive and a way of saying thanks.
Asking for points is like asking someone to say "thank you": The only time we do this in real life is when teaching a child good manners.
Saying it to an adult is insulting, so why do it in the forums? If someone keeps asking questions without awarding points, simply stop answering them or use the abuse button to report it
Best regards
Horst

Dep area neg. value

we have one asset, group depreciation area is in USD, but our comp code currency is JPY, due to exchange rate fluctuation, the group depr. area now have negative value: -230 USD, but book dep. area is positive value, now we can't do any transaction against this asset because one of dep. area (grp dep. area) is negative, how to resolve this? thanks

Hi,
It is possible to maintain allvalues allowed in the tcodes : OADB and OABN. Here maintain the Allvalues allowed or negative values allowed in the Asset Accounting.
May i hope your problem was solved.
Regards,
Kanike

Asset Activation with different values in dep. areas via CJ88

Hi,
I would like to activate an asset via CJ88 from an AuC.
The challenge is that I would like to activate different values in different depreciaton areas.
I have seen that the AuC uses transaction types 338/339 for the transfer posting. In this transactions types it is possible to choose transactions types for the transer posting for the new asset which is currently 331/336. What I have done is that I copied 331/336 to Z31/Z36 and adapted them so that its possible to chosse the values for the different dep. areas. I also replaced 331/336 in the types 338/339.
But when I run CJ88, it still takes 331/336....
Any idea? Is my approach possible? Any other Idea?
Thanks and best regards,
Sebastian

Hi Sebastian
Assume you want to settle 100 to Dep Area 01 and 120 to Area 15
During initial settlement, let the system settle 100 to both using 331/336
You make a copy of them and limit the Z trans type to Dep Area 15 alone.. Then post 20 USD to Dep Area 15 using ABSO
Br. Ajay M

Values for Ordinary deprec. have changed in dep. area 01 in fiscal year 200

Hi Guru,
I m in the process of upgradation from 4.6C to ECC 6.0.
In Asset Accounting in 4.6C there is a facility of batch input thereby the user can replace the block cost centre by new one. As this facility is not available in ECC 6.0 so I have figured out all asset master in which the block centre are entered. And one by one replace the old cost centre by new one in asset master. When I ran the dep. "AFAB" there were no error. But for few assets the dep. shows positive value and cumulative dep. as zero. When I display the master of these assets and go into asset value of that asset then it give the message
Values for Ordinary deprec. have changed in dep. area 01 in fiscal year 2008
Message no. AU390
Diagnosis
Depreciation terms were changed in depreciation area 01 since the last time depreciation was recalculated. The values for Ordinary deprec. that were saved in the database in fiscal year 2008 are therefore different from the newly calculated values by an amount of 102385.74-.
Procedure
Check if the newly calculated values are correct. If they are, then carry out a depreciation recalculation. You should be aware that if you recalculate depreciation, new values could arise for all open fiscal years, and these would then have to be posted to the general ledger by means of a depreciation posting run.
If, on the other hand, you want to keep the values that are saved in the database, you have to set the depreciation terms back to how they were at the time of the last depreciation recalculation.
To see a comparison of the old and new values, you can use the Display dep. calc. function in the asset value display or the Recalculate values function in the Asset Accounting menu."
Guru, New value is absolutely wrong as it reversed all the dep. charged upto previous period.
please tell me what I can do & how i colud check whether any body has changed the dep. term or not.
Thanks
Rajeev

Hi,
start transaction AFAR for the company code as real run. That will recalculate all asset values and should solve the problem.
Alternative would be to go to AS02 and choose "edit -> recalculate values" from the system menu.
Regards,
Markus

Getting an error while activating a planning area "Enter values for planning horizon From and planning horizon To for the storage time profile level"

Dear S&OP community,
I am getting following error while creating a planning ares in a newly installed sandbox. "Enter values for planning horizon From and planning horizon To for the storage time profile level".
This what I did...
1) Created new attributes and master data objects and activated them successfully.
2) Time profile created and activated successfully
3) Trying to create planing area by assigning time profile in step 2 and assigned master data from step1..Unable to save the data and system returns
this error - "Enter values for planning horizon From and planning horizon To for the storage time profile level"
My understanding is time profile needs to be active but doesn't have to have values...
Any help is appreciated.
Thanks,
Krishna

YS,
Here are my time profile settings
Level       Name          Display Horizon - Past Display Horizon - Future
1             Monthly     -6                                       11
2             Quarterly     -2                                       3
3             Yearly        -1                                       2
Time profile is active and but time profile data is not loaded
Thanks,
Krishna

Asset values updation in Eco. Dep area 50

Dear All,
I have created one asset for Good will as on 01.02.2010 (go live date 01.02.2010) by using AS91, and i updated APC cost and Acum Depreciation for Dep area 50 - Eco. Depreciation only.
Right now my client want to add some new values (because of wrong value updated at the time of take over values)
How can i do the additions for those assets. i have total 4 Dep. areas but this asset have only one dep. area 50 - Eco. Dep. , more over they run the Dep. for last year (FY - 1st Jan. to 31 Dec.) Please suggest me.
Regards
Radha

Dear Murali,
I have done all those things, and we updated some values for Good Will with Negative sign, but right now we have to add some Negative value in the same asset.
EX: Asset no. 10001
take over values 100000
actual value 250000
Right now i have to add 150000 in that asset
Regards
Radha

Imbalances between the dep area values

Hi
We have separate areau2019s for local currency- 01 (INR) and Group Currency- ( 03 ) for reporting purpose. The Group dep area was set up the dependent area of 01. What ever values are posted in dep are -01 the same values are automatically updated to group
dep 03.
But last month we have posted the depreciation in the company codes. After that we have executed the reports at the both area ( 01 & 03 ). Now these dep area are showing the different values in AM & FI at group currency ( USD ). Even the local currency values are updated similarly in AM & FI.. There was no problem in local currcy u2013 INR (dep are-01 ), there is a problem in group currency u2013 USD ( dep are- 03 ).
Why the values are updated differently in AM u2013 FI at group currency- USD only ?.
We have set up different GL accounts for both dep areau2019s
Dep areau2013 01 ( local currency u2013 INR )
Dep area- 03 ( Group currency u2013 USD )
Thanks
Ram

Have a look to the asset value date when you created the posting, I think it takes the exchange rate from that date. For the depreciation it takes the date from the last day of the Month.
How you have setup Specify the Use of Parallel Currencies??? -- Yes
SPRO:
Asset Accounting / Valuation / Currencies / Specify the Use of Parallel Currencies
Have you assigned 03 to Group currency? - yes

How many itunes accounts are allowed per computer?

Hi, I'm trying to figure out the best way to handle configuring all 80 of the iPads my business is purchasing. I know there is a limit of 10 devices per iTunes account. How many iTunes accounts are permitted per computer? I tried to just create 8 apple ids, which I was able to do online. But when I try to sign in to those on iTunes, once I get to the part where I verify with a credit card, I can not get past the 3rd one. I have previously signed in with 2 other accounts on my machine, so I'm wondering if there is a limit of 5 accounts per computer. Can anyone verify? If that's true, what suggestions do you have for how to get around or best manage this situation?
I'm not as much of a techie as I should be.. but thanks in advance for your help!!

Hi allisonwfrom nc,
The limit you are referring to is for a single personal Apple ID (not for multiple users) that is allowed to be associated with a total of 10 devices (up to 5 computers and the rest on iOS devices). Example you can have 5 computers and 5 iOS devices, 3 computers and 7 iOS devices, but not 6 computers and 4 iOS devices.
From http://www.apple.com/legal/itunes/us/terms.html#SERVICE
Association of Associated Devices is subject to the following terms:
i) You may auto-download iTunes Auto-Delivery Content or download previously-purchased iTunes Eligible Content from an Account on up to 10 Associated Devices, provided no more than 5 are iTunes-authorized computers.
Again this is for a single user. For multiple users like in schools or businesses you need to use VPP to purchase multiple licenses. http://www.apple.com/business/vpp/
APP STORE PRODUCT USAGE RULES
( i )If you are an individual acting in your personal capacity, you may download and sync an App Store Product for personal, noncommercial use on any iOS Device you own or control.
( ii ) If you are a commercial enterprise or educational institution, you may download and sync an App Store Product for use by either (a) a single individual on one or more iOS Devices used by that individual that you own or control or (b) multiple individuals, on a single shared iOS Device you own or control. For example, a single employee may use an App Store Product on both the employee's iPhone and iPad, or multiple students may serially use an App Store Product on a single iPad located at a resource center or library. For the sake of clarity, each iOS Device used serially by multiple users requires a separate license.
If you are an educational institution or business you will want to enroll in Apple's Volume Purchase Program (VPP) which allows a single Apple ID to purchase multiple licenses of an app.
There is a free OS X program called Apple Configurator that you can use to distribute the VPP codes to your fleet of iPads. Apple Configurator uses a single Apple ID to install apps on your iPads. Configurator will also allow you to install free apps on multiple iPads using a single Apple ID.
There are a few things I recommend you do to get started:
First I would watch the iOS Deployment Model Videos on the left side of this page:
http://www.apple.com/education/resources/information-technology.html
Then I recommend you read through these two guides:
iOS 6 Education Deployment Guide
http://images.apple.com/education/docs/ios_6_education_deployment_guide.pdf
Apple Configurator Help Guide
http://help.apple.com/configurator/mac/1.0/
This will give you a solid foundation for managing iPads with Apple Configurator. Once you read through these guides you will likely have more specific questions that you can post to these forums.
Hope this answers your question!
~Joe

How to post a acquisition entry in Dep area 30 (for Non Leading ledger)

How to post a acquisition entry in Dep area 30 (for Non Leading ledger N1)
In our scenario, following configuring is being set up:
1 Book depreciation IAS/IFRS 1 0L
30 LOCAL 3 N1
51 Property Tax 0
60 DELTA 6 N1

Hi Saurabh,
Create a new custom transaction type by coping existing TTYPE 100 and restrict the transaction type which allow posting for dep.area 30 and do posting in FB01L by selecting ledger group.
Regards,
Mukthar

I can no longer download apps that I buy. They are on my computer, they will no longer sync onto my phone. Yes, I DO know how to do it. They no longer will go onto my phone.

I can no longer download apps that I buy. They are on my computer, they will no longer sync onto my phone. Yes, I DO know how to do it. They no longer will go onto my phone.

Did some searches, but did not come up with anything regarding your specific issue (the original one, the grey 'waiting' problem is quite common). If no other ofrum users chime in, it is indeed time to contact Apple / iTunes Store support.
If you have not yet one so, Try to Reset your device. Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off that shows up first).
You could also try to re-download one or two apps, just to see if anything changes. Log in to the iTunes Store, go to the Purchases section and download from the list of past purchases or free apps.
Sorry I wasn't of better help. Good luck.

How do I erase the "other" files that are occupying my computer

I already deleted pics, music, etc and I am ready to continue to delete unnecessary files. How should I erase the "other" files that are in my computer. Please, advice. Thanks

For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

CO down payment update is active in controlling area , How to Deactivate?

Q1) CO down payment update is active in controlling area , How to Deactivate the same?
I am trying to post,vendor Downpayment in F-48, it is aking for Maintain default cost element in controlling area .
Is that required?

Hi,
Generally, SAP makes that the down payments are always updated in CO. To maintain the default cost elements, you could use OKEP transaction. However, it's possible to deactivate this function by implementing note 388843.
Regards,
Eli

I have apps on my iPad and my computer is not connected to the Internet. How do I get my apps to load on the computer ? Because it says the apps on my iPad will be replaced with the apps that are on the computer but there is none there!

I have apps on my iPad and my computer is not connected to the Internet. How do I get my apps to load on the computer ? Because it says the apps on my iPad will be replaced with the apps that are on the computer but there is none there!

Authorize the computer in iTunes -- Store>Authorizie this computer. Transfer the purchases from the iPad into iTunes and then you can sync with iTunes. Read this for instructions on transferring purchases from the iPad into iTunes.
Transfer purchases.
http://support.apple.com/kb/HT1848

Information Message-Values for Ordinary deprec. have changed in dep. area 0

We had changed the scrap value for few assests and when ever we goto AW01N i.e asset explorer ,it displays the message -
Values for Ordinary deprec. have changed in dep. area 01 in fiscal year XXXX.
The user doesnt this message popping up every time we look at an asset now.

Hi,
start transaction AFAR for the company code as real run. That will recalculate all asset values and should solve the problem.
Alternative would be to go to AS02 and choose "edit -> recalculate values" from the system menu.
Regards,
Markus

Newly activated Dep Areas-How values computed

Similar Messages

Maybe you are looking for