Newly Added Iview now showing in MSS role

Hi Experts,
I have a strange issue which is bugging me since yesterday.
I have a customized MSS role in my portal where i have added one WebDynpro Java Iview to this role. I can see the iview in the MSS role when open the role as object. But ! when i see the same role by assigning to me, i couldn't see the newly added iview in the same role.
I have added the same iview in several places (worksets) but still couldn't see that iview in the role. I don't understand why it behaves all of the sudden.
Is it cache problem? if so, i have waited 10 hours and couldn't see the iview still. Should i do something else to show that newly added iview ?
Thanks in advance.
Regards,
Suresh

Hi JYOTHI,
As it is custom role , check with your Hr Team for dependency of portal display on backend .
Gneerally for standard business packages, home page framewokr configuration in backend provides navigation in portal.For your custom role , there might be siimilar configuration whcih hr consultants in your organization knows.
Regards,
Koti Reddy

Similar Messages

Assessment - Planning Page will not show in Custom MSS Role

I have gone through the Notes/Docs for setting up OBN for Performance Management and have implemented the same.
Now if I go to the Standard MSS role and try to open up Assessment > Click on 'Create' for Succession Planning, it works fine by showing up the Talent Assessment window where it can be completed.
Now, we have a custom MSS role copied from the standard one and I have included the same Talent Management workset (with the page, folder inside - just like the standard role).
But when I try the same scenario as above (Z_Manager_role > Talent Management > Assessment (from Service Map) > Click on Create under Succession Planning), I get the following error.
There is no iView available for system "SAP_ERP_HumanResources": object "employee". For more information, contact your administrator.
Why would it work on the standard role and not the copy? Any directions highly appreciated.
FYI. We are on 7.01 SP8, SAP_MSS 600 SP18
Thanks,
BR
Edited by: BR on Oct 5, 2011 12:38 PM
Edited by: BR on Oct 5, 2011 12:39 PM

Thanks Sidharth.
Sorry for not getting back earlier. I had opened a message with SAP. It looks like the problem has to do with Navigation Targets in my custom MSS role - so that is narrowed down now.
The following prerequisite applies: You must include the navigation targets (for the portal pages mentioned below) in your role.
pcd:portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.14.bp_folder/com.sap.pct.erp.mss.14.pages/com.sap.pct.erp.mss.hcm/com.sap.pct.erp.mss.appraisal_document_wd_ui
pcd:portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.14.bp_folder/com.sap.pct.erp.mss.14.pages/com.sap.pct.erp.mss.hcm/com.sap.pct.erp.mss.appraisal_document_pmp
How do I include these navigation targets in my custom MSS role? I mean these pages are not part of the role.
Thanks,
BR
Edited by: BR on Oct 14, 2011 11:46 AM

Exchange 2010 Mailbox server role now showing in EMC

Hi,
I am installing E2K10 standard edition in my lab and installed CAS + HUb role on a machine with OS Win2K8 SP2. Now I installed MBX role which I did on Win2K8 R2. Installation was successful with no error but I am unable to see mailbox server in EMC and
unable to create database while it is showing in Adsiedit. So I am confused if the issue is because of mismatch of OS on both machines? Is there a way I can do some changes in Adsiedit so tht newly installed machine can start showing in EMC or should I uninstall
it and build the same machine with OS Win2K8 SP2 ? Thanks.

Do you get Mailbox Server when you run these commands?
Get-ExchangeServer and Get-MailboxServer
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Role iView doesnt show up

Hi!
I have a peculiar problem...I created an iView, a page for the iView and a workset for the page. Then I created a role, assigned the workset to the role and finally assigned the role to a user.
However when I log in as the user, I dont see the page/iView. In fact I see nothing at all. Giving the user "eu_role" brings up the normal "Home" workset but assigning him to my role shows absolutely nothing. I see the portal desktop and stuff (everything default). The only role I want to assign to him is my role but the page/iView doesnt show up.
Any ideas?
Sameer

Hi,
strange thing, in my desparation I restarted the whole server and now everything is working right. The user can see the role and the page...
Bye
Sameer

Yesterday i sync music to my ipod touch from iTunesn but nothing showed up in the 'recently added' folder. now today neither my computer or iTunes is recognizing the ipod. I uninstalled iTunes and reinstalled it and restart the computer

Yesterday i synced my music to my ipod touch from iTunes. the musice went on but nothing showed up on the ipod in the 'recently added' folder. now today i went to connect it to the laptop and neither my computer or iTunes recognized the ipod. 1st a message showed up saying an ipod was detected but cuddn't be identified so reconnect and when i did nothing showed up again. i have uninstalled and reinstalled iTunes and restarted the computer a number of times but the ipod still wont show up. Can anybody help?

Here:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Does the iPod charge?
Have you tried another cable?
Another computer to help determine if you have an iPod or computer problem?

LOV does not show newly added data in the same session

Hi guys,
I work with JDeveloper 11g Release 2. We use Oracle ADF to develop our web app.
In a page we have a LOV (say the page name is "a"). The related data for that LOV is inserted to the db in another page ( say the page name is "b").
When new data is added in the page "b" and goes directly to the page "a" the LOV does not show newly added data. But if the user log out and log in again
LOV shows newly added data correctly.
Is there a way to show the newly added data in the same session without logging out? Please help.
Regards !
Sameera.

Add the following method in your ViewRowImpl base class:
public void refreshLOVAccessorQueries() {
    List lovs = getViewDef().getListBindingDefs();
     if (lovs != null) {
         for (Object obj : lovs) {
            getListBindingRSI((ListBindingDef)obj).getRowSet().executeQuery();
             ListBindingDef lbd = (ListBindingDef)obj;
Export that method to the Row Client interface, add him to the pageDef, and invoke in the executables section of the pageDef:
    <executables>
<invokeAction Binds="refreshLOVAccessorQueries" id="callRefreshLOVs"
RefreshCondition="#{!requestContext.postback and empty bindings.exceptionList}"/>
   </executables>

BPM Process does not show newly added task

I added a new task to my current BPM Process which has several tasks already built into it and they work when deployed. When I execute the workflow and get to that step, I get the following message: Details not available for this task. I am using jDeveloper 11.1.1.5. I created my page with ADF. I can see the pages for all the rest of the tasks in my process but not this newly added step. I have checked the source for this task against other tasks in the process and it looks the same. Does anyone have an idea what I might need to change or add in order to make this work?
Edited by: user10279592 on Jan 13, 2012 7:20 AM

If you're getting the Server 500 error and it is not an initiator task, what are you seeing at the bottom of your log file?
If you're getting the Server 500 error and it's an initiator task, then there is a trick to figuring out the real problem (close the dialog -> refresh the worklist -> select the work item at the bottom of the list). The initiator activity makes it necessary to do this additional step to see what the issue is.
Hope this helps,
Dan

Itunes not syncing "newly added playlist" on my iphone 5!

I am running IOS 7.0.4 (11B554a) on my iphone5 16Gb, modem firmware 5.02.00. i have latest iTunes (V. 11.2.2.3).
Well, as usual i add new songs to my iTunes library, which also show up in 'newly added' playlist in iTunes. So over syncing, it should also be visible in my iPhone in the 'newly added' playlist on my phone, BUT it does not appear in the playlist, HOWEVER, the song does sync and appears in the normal songs list. It is annoying... it never occurred to my previous iPhone.
> I tried unsyncing my whole music library and synced it again but of no avail.
So any suggestion or solution?? will be highly appreciated! Thanks!

Problems Syncing Playlists & Songs in iTunes with Computer & Apple Devices
I've seen variations of this question on the Apple community boards and I myself have struggled with this for months now and I believe I have a solution, at least for what seems to be one of the problems.
If you have purchased a subscription of iTunes Match, then all of your data is filtered through the glorious cloud. ALL computers and devises involved in syncing data must have iTunes Match enabled for syncing to replicate.
This solved my particular issue within 2.1 seconds.
1) On your computer open iTunes. Go to the menu item 'Store' and click on 'Turn on iTunes Match'.
2) On your iPhone open 'Settings', 'iTunes & App Store', click to turn on 'iTunes Match'.
3) For good measure, restart your computer and iPhone (probably not necessary but I did).
Hopefully that helps if not, I hear Google has some type of phone gadget..

Newly added column not displayed in Interactive report

Hello,
I have a tableA with 3 columns.In the application i am displaying as Form with Report region as Interactive report(Oracle 10g Application Express 3.2).
I added one column to tableA.Now when i am refreshing the report by adding that column in the select query,the new added column is not displayed in the application.
How can i do this so that the added column can be displayed.I dont want to delete the whole thing and redo it again.
Thanks
Siya

Hi Siya,
The Interactive Report will not show you the newly added columns by default. You have to select those columns from the actions menu and when all the required fields are displayed then save it as the default report.
Then you will be able to see all the columns.
Hope this solves your problem.
Thanks,
Satish.

Why are my newly added playlists upside down?

Just this week, I've noticed that my newly added playlists are importing from the file folders on my hard drive to the iTunes and iPod Touch upside down. I accepted an Apple pushed update sometime last week and hadn't noticed anything funny with the playlists until I added a few new ones this week.
I updated my iTunes to the latest available as of last week and my iPod Touch states that its current version is 4.2.1 (8C148). I've been reading that iO5 has been having this issue since its release late last year and iTunes intermittently over the past few years going back to 2007 with various version updates; yet, no one had a solution until another update is released.
Since I have a Gen2 iPod Touch, I didn't think that my firmware could be updated to iO5, which contains this upside issue with the playlists. But apparently, implements of iO5 exists in the latest 4.2.1 update which causes this issue.
When looking at the list of songs in iTunes, the newly added songs, even with the correct order of tracks, 1 of 18, 2 of 18, etc, written into the properties of each track, they do not show up properly in the song list. I have to create a playlist and move the songs over and then manually reorder the songs. With the iPod Touch, which is weird, the songs move over in order from the playlist created in iTunes, and are visibly in order, but when I access the playlist on the device when not docked to a computer, the songs are in upside down order. Even when I manually Edit the playlist on the device and correct the issue and save the change, after docking the device to my computer, the songs will revert back to upside down order on the device, but visibly looks fine (correct order) in iTunes and the playlist when the device is still plugged into the computer.
Does anyone know why this problem exists and what I could do as a workaround to resolve this upside down issue with playlists?

Think of the arrow pointing from large to small, so the wide fat or large end of the arrow is at the top and the sharp pointy or small end is at the bottom. So it will sort from large to small and alaphbetically Z is larger than A. Click the Name bar and the arrow will reverse with sharp pointy end, small, at the top and large fat end at the bottom so it will now sort A to Z, as A is deemed to be smaller than Z.
Hope that helps?
Phil

Newly added group to address book not syncing

I created two groups in my address book on my MacBook when I first activated my iPhone four weeks ago... I added a third group to my address book today and iTunes is not recognizing my newly added group to sync. I've rebooted several times, my MacBook and my iPhone and it has not resolved. Please help!
Thank you for your time.
Erica

Got the same problem. Only I actually synch through USB. Tried iSync, iTunes. Reinstalled iTunes. Backed up Address Book. - nothing helped.
Then i went to iTunes preferences -> Syncing and removed my iPhone's backup. That messed it up. Now none of my contacts sync! DO NOT DO THAT! and still iTunes shows only the old Address Book groups, not the new ones...
Somebody out there, please help. The only way i can see right now is resetting the iPhone. It may get some of my contacts back on iPhone, but what about groups - i cant live without those!.... =(

Blank pages for all applications in Manager Self Service (MSS) role

Hi Experts,
We are newly implementing ESS/MSS and deployed ESS/MSS business packages with following BP's
BP ERP05 COMMON PARTS 1.51 SP5
BPERPESSWDA 1.50 SP5
BP ERP05 MSS 1.51 SP5
after deploying above BP's all ESS applications working fine, but in MSS role all applications(Team,Budget, Projects and Planning) giving me blank page.
for example..MSS>TeamEmployee Information--> when I click on "General Information,compensation Information links etc.." it is displaying in separate window with blank page. it is not displaying any error, just displaying blank page.
We are using Net Weaver7.3, EHP5 and ECC6. Can any one help out of this?
Thanks in advance,
Janardhan

There are two parts of the Web Dynpro based business package
1. Portal content (iView Page, Role etc) (Starts with BPxxx.sca)
2. Web Dynpro content(MSSxxx.sca)
My guess is you have just deployed the Business package content and not the Web Dynpro content.
Refer to this and deploy the corresponding files
http://wiki.sdn.sap.com/wiki/display/ERPHCM/HOWTOGETRIDOFSPSTACKMISMATCHISSUES
Thanks
Prashant

Newly added contacts suddenly become strangers (not shared their details with you)

A newly added contact suddenly disappears after a few minutes, it's still present in my contact list, but with the gray question mark and "this person has not shared their details with you", even though in the conversation itself it says "<friend> has shared contact details with <myself>". On the other side, it seems like none of this is happening and my friend can still see my status as if I was their contact (which I am). After re-sending the contact request multiple times (which is instantly accepted, it doesn't seem to even display on my friend's side, he just instantly becomes my contact again) it seems to have sorted itself out and that person is now in my contacts, hopefully for good. Now yesterday I added a new contact and the same thing happens, she appears as a stranger about 10 minutes after accepting my contact request, even though it seemed fine on the mobile app while she was online, but now even mobile considers her as not part of my contacts, and also her profile picture isn't displaying on the mobile app. Note : there is already a thread about this in the Skype for Windows Desktop section, however since this problem has clearly nothing to do with the client you're using and is related to the platform/whatever software runs on Microsoft's servers, I'm reposting this here. Skype for Windows Desktop version 6.20.0.104 running on Windows 7 Professional 64-bit, and Skype for iPhone version "idon'tknowwhat because there's no "about" page apparently" running on iOS 8.0.2, iPhone 5S. My Skype account isn't linked with any Facebook nor Microsoft account (it was, but it's been unlinked about two months ago). To avoid this thread the same fate as the linked one, that is becoming polluted by some smart-ass that believes everything is caused by a virus, corruption of the Skype folder in AppData or compromised account, let me state this right now : my password was changed, the account isn't compromised (checked with /showplaces and the only logged in clients are my desktop and my iPhone) and the AppData folder was already deleted, without success (it made things worse my making my entire contact list disappear for 24h, fortunately they slowly came back one by one), so if you have nothing to say please refrain from copy/pasting such useless answers.

Hi, I hope someone can help me. I have a similar problem to Andre (from original post a week ago below). I only use Skype to communicate with a personal friend who has recently been posted abroad (Europe) to work. I always sign in via my Microsoft account and have done since Microsoft & Skype merged and I linked the two together. My contact does the same. As my accounts are linked, my friend shows up in my contacts both as a Skype contact and also a Messenger contact. When we communicate, it is normally always via our Skype names although I can see them online under both names. On Friday night however, they came online but shortly afterwards, I noticed that the grey question mark had appeared next to their Skype name saying 'Person has not shared their contact details with you'. They are still showing up ok under their Messenger name as it appears as offline, so I have been a bit confused why this has happened and I haven't yet had a chance to speak to my friend to ask them. I decided to look at the Skype help forum and came across this post by Andre who has had a similar problem, although he says it has happened with a couple of new contacts but his problem has now been resolved. I was hoping someone could help me and give me some advice as to what I should do now. I have checked my computer and have the latest Skype version for desktop installed. I am using Internet Explorer 11; Windows 7 Home version - 64 bit. I also have the Skype app on my android smartphone which has the most recent updated version. I don't really use Skype on my phone although I did log-in on late Friday afternoon but didn't stay on long before I signed out. I have read in posts in the past about corrupted files etc on Skype but because I don't know much about these things, I don't like to mess about with the programs that are installed on my computer because I don't know what I'm doing. The person who responded to Andre's query was a staff moderator called Aimi, who had previously told him to send the name of the contact in question who had the grey question mark appear beside them. I would be very grateful if someone could help me with this problem as I would like it sorted out as soon as possible please. Thanks, Linda F. AndréDaniel wrote:A newly added contact suddenly disappears after a few minutes, it's still present in my contact list, but with the gray question mark and "this person has not shared their details with you", even though in the conversation itself it says "<friend> has shared contact details with <myself>". On the other side, it seems like none of this is happening and my friend can still see my status as if I was their contact (which I am). After re-sending the contact request multiple times (which is instantly accepted, it doesn't seem to even display on my friend's side, he just instantly becomes my contact again) it seems to have sorted itself out and that person is now in my contacts, hopefully for good. Now yesterday I added a new contact and the same thing happens, she appears as a stranger about 10 minutes after accepting my contact request, even though it seemed fine on the mobile app while she was online, but now even mobile considers her as not part of my contacts, and also her profile picture isn't displaying on the mobile app. Note : there is already a thread about this in the Skype for Windows Desktop section, however since this problem has clearly nothing to do with the client you're using and is related to the platform/whatever software runs on Microsoft's servers, I'm reposting this here. Skype for Windows Desktop version 6.20.0.104 running on Windows 7 Professional 64-bit, and Skype for iPhone version "idon'tknowwhat because there's no "about" page apparently" running on iOS 8.0.2, iPhone 5S. My Skype account isn't linked with any Facebook nor Microsoft account (it was, but it's been unlinked about two months ago). To avoid this thread the same fate as the linked one, that is becoming polluted by some smart-ass that believes everything is caused by a virus, corruption of the Skype folder in AppData or compromised account, let me state this right now : my password was changed, the account isn't compromised (checked with /showplaces and the only logged in clients are my desktop and my iPhone) and the AppData folder was already deleted, without success (it made things worse my making my entire contact list disappear for 24h, fortunately they slowly came back one by one), so if you have nothing to say please refrain from copy/pasting such useless answers.

Purchasing Cube -- 0PUR_C01.. "Added record" is showing zero in request

When i try to load the data to this cube, my trasfer record is showing values while Added Record is showing zero values. Whats the problem. Please advise !!

Hi,
Check whether do you have defined the industry sector in R/3. This has to be done before filling the setup table. search the forums with note no 353042.
This is done with the help of Transaction MCB_ which you can find in the OLTP IMG for BW (Transaction SBIW) in your attached R/3 source system.
Here you can choose your industry sector. 'Standard' and 'Consumer products' are for R/3 standard customers, whereas 'Retail' is intended for customers with R/3 Retail only.
You can display the characteristics of the process key (R/3 field BWVORG, BW field 0PROCESSKEY) by using Transaction MCB0.
If you have already set up historical data (for example for testing purposes) by using the setup transactions (Statistical Setup Programs) (for example: Purchasing: Tx OLI3BW, material movements: OLI1BW) into the provided setup tables (for example: MC02M_0SCLSETUP, MC03BF0SETUP), you unfortunately have to delete this data (Tx LBWG). After you have chosen the industry sector by using MCB_, perform the setup again, so that the system fills a valid transaction key for each data record generated. Then load this data into your connected BW by using 'Full update' or 'Initialization of the delta process'. Check, whether the system updates data into the involved InfoCubes now.
If all this is not successful, please see Note 315880, and set the application indicator 'BW' to active using Transaction 'BF11'.
Regards,
Anil Kumar Sharma .P

Newly addes movies/tv shows into iTunes don't appear on Apple TV

I don't know whether I am the only one seeing this problem...
I have been converting my DVDs to H.264 format using Handbrake/DVDFab and then I add them to iTunes library. My iTunes is setup for Custom Sync with syncing enabled ONLY for the Music. This means my movies/TV Shows/Podcasts are all setup for "Streaming". However, when I access "My Movies" or "My TV Shows", I still see the old list (none of the newly added titles are shown).
I have to shutdown iTunes and relaunch for the list to get refreshed in ATV.
Do you observe this as well?
I continue to be plagued with the disappearing ATV under iTunes.

You appear to have two separate issues here, the first, the one with your firewall is causing most of the issues and error messages you see. Have you checked your firewall settings to see if they are as they should be.
The other issue of new content not being updated is a minor but annoying issue compared with the first. I can't say whether or not it will eventually update content if you simply leave it alone. My wife and kids are not that patient and have me hit sync within a few minutes of new content being added.

Newly Added Iview now showing in MSS role

Similar Messages

Maybe you are looking for