Newly copied client has no data!

Hi,
i had created new client 800 and done the client copy using 000 as a source client.
using user name SAP* and password pass.
after client copying when i see the databse tables i found no entries.
am i missing something here?i had used tcode SCCL for the same
Thanks,
Ravi

Hi
While doing local client copy(SCCL) which profile u selected?
We have different profiles
SAP_ALL
SAP_APPL
SAP_USER
SAP_CUST
Login in target client(800) with user sap* and password "pass" and log on SCCL.
If u select SAP_ALL means you will get the all data.Try to select SAP_ALL and source client 000.Schedule in background .
kiran.v

Similar Messages

How to make copy client with customizing but with no deleting appl.data

Hello,
Which profile of copy client i need if i want make copy customizing without deleting application data in target client.
regards,
Denis

hello dennis,
There is no way you can do that, you cannot copy only customizing onto a client without deleting the application data since there is no such profile in the client copy profiles to do so.
Also, to me it seems a bit strange to keep the application data (which depends on customizing for integrity) and update the customizing with something else!
However, still if you wish to do this, there is a crude way of doing it (theoratically). You could use the client copy by a transport request where in you club all your customizing transport requests into one single transport request using transport of copies and then use the client copy via transport request to copy the customizing.
Here are the steps:
1. Create transport of copies [click here|http://help.sap.com/saphelp_nw70/helpdata/EN/57/38e1a94eb711d182bf0000e829fbfe/frameset.htm]
2. Copy the newly created transport request into the target client via copy by a transport request functionality.
click the following link for the same:
[client copy via transport request|http://help.sap.com/saphelp_nw70/helpdata/EN/69/c24c754ba111d189750000e8322d00/frameset.htm]
Regards,
Siddhesh

Unable to log in to newly create client copy

I 'm attempting to create a new client from a newly installed ECC 6.0 IDES system. I go into SCC4 and create a new lient '200' and log off.
I try to log in to client 200 using sap* and pass and get wrong username or password error.
I can see the client listed in scc4, but can't log into it.
Any ideas?
Bob

Hello,
Having the previous question answered helped alot, but I do have another question:
Can I put the client copy on a different drive than the original?
I have SAP installed on the E: drive and would like to place the new copy client on the F: drive, can I do that?
Bob

Create Client copy only with Master data

hi friends,
we are going for SAP Re-Implementation.
we want client copy only with master data without having transactional data
Is it possible to copy the master data from production to production.
can we transfer the data using ALE/I DOCS...?
Is there is any standard BAPI to transfer data across client....?
if there is any solution please give me guidance.
i have searched in SDN and SAP technical but i can't find the proper solution.
Thanks in advance.
regards,
karunakar

Hi Karunakar,
1) Make a client copy ready 2) Use Idoc and moved the master data. I am not sure how much data it is.We did the same before.
Check these links form Peter.
[TDMS|http://204.154.71.138/images/whiterhino/fp/tstsym5/testdatamigrationserver.pdf]
[TDMS Wiki|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b43e2b4d-0b01-0010-c191-cba32880cb95?QuickLink=index&overridelayout=true]
Regards,
Madhu.

Confirm that client has received copy of form

My client has a Customer Agreement in a secure zone. After the customer submits the form, and my client receives a copy of that form, can that be taken as proof that their customer has also received a copy of the form?

Hey Brendon.
That is the workflow notification. You can never 100% be sure a person has received an email or not. They could delete them by mistake, get into their spam folder, never come through to them, not be read by them, issue on the net so they never get it, they got it but say they have not....... List is big.
But BC sends out an auto responder unless you have turned that off and if you have left in the web form results tag then they will have received that email with that information.

Copy client manually with TP-commando

Hi!
I am about to delete and then to import a client from productive client into the QAS-system.
I perform the deletion of the client not via SCC5, but with skript that executes the following:
clientremove
client=300
select *
The files from client-export were generated into the \cofiles and \data
Now I would like to execute the import manually with tp import commando.
Question
What ais the right TP commando for this import?
tp pf=TPPARAM import "<sid>KT12345" <sid> clientxxx u148 "-Dr3transoptions=tcs=160000 commit=128000"
What are especially the right u-code, tcs and commit values?
Thank you

Why not use a computer startup script where you specify the path to the installation files. Check the script from Jason, it allows you to control the entire procss -
http://blogs.catapultsystems.com/jsandys/archive/2010/12/30/updated-configmgr-startup-script.aspx
Kent Agerlund | My blogs: blog.coretech.dk/keaand
SCUG.dk/| Twitter:
@Agerlund| Linkedin: Kent Agerlund
Script looks interesting, thanks Kent. Though there wouldn't be enough time to implement for these few PC's. If they just run copy down the 'Client' folder and then run CCMSETUP.exe locally without switches, would this be enough? Then later
on the newly installed client will retrieve settings from AD?

Any Bapi fn module to copy bi prd table data to bi dev table

Hi all,
Im BI techno functional consultant here my requirement is to write a report such that when it executes ,
it has to copy bi prd table data to bi dev table.
ex: The same ODS table data moving from BI PRD to BI DEV.
Can U please sujjest me the code to write a report or any fn module..
with regards,
prasad.

hi prasad,
From BI point of view, what Amit suggested is the best way to get the data from one system to another sytem.(try to convince your client)
If you want to get the data through ABAP, check with an ABAPer if it possible to have another system(for example, Prod)
in the WHERE condition of a SELECT statement.
There are function modules which can be created with an attribute "remote enabled module"(you can see that in attibute screen of a function module) to get data from another system.(you will need more information than this)
This is more of an ABAP question. A post in the ABAP could be of help.
Thanks.

Excel sheet has modified data cells error - do you want to submit

Using smartview in office 2007 I often get trapped in a loop where each time I modify any data on the excel sheet I get the error "Excel sheet has modified data cells. Do you want to submit the modified data cells before proceeding?". Regardless if I choose yes or no I basically have to start a new instance of excel to clear the error.
For the most part I never use member select rather just type the members I want freehand in the excel workbook. Seems like the error arises after I insert or delete a row or column and then try to update the page.
If I "reset" the connection it seems to help but not all the time.

This may be the same issue as you are experiencing "When Trying to Copy Cells Between Excel Tabs Get Message "Excel Sheet has modified data cells do you want to submit the modified data?" [ID 1301092.1]"
The document is on "My Oracle Support"
Cheers
John
http://john-goodwin.blogspot.com/

XML Publisher report errors out when RDF report has no data

Hi everyone,
I created a template and attached it to an RDF. When i run the oracle report with the attached template, if the report has 'not data exists' the report is erroring out. is it the normal functionality of XML publiher??. Because i remember at my earlier client i have run some reports for which if 'no data exists' still the program would complete normal but the output would be blank.
The xml output is creating the tags for the elements.
any help appeciated.
Thanks
sam

Hi Sam,
Yes this will happen depending on what the template is repeating on etc. You can handle this quite easily using sub-templates.
Firstly create your normal template as a sub-template (so surrounded by the <?template:TEMPLATE_NAME?> tags)
Then create a second template that contains the text "NO DATA FOUND" as another sub-template.
Create a third template (this will be your main template called by the report), which imports the two sub-templates, then using a choose statement, count the number of occurences of you main repeating group in your XML. If the count = 0 then call the "NO_DATA_FOUND" sub-template, otherwise call the normal sub-template.
I hope this helps, if you need an example I can send you one, just let me know your email address.
Regards,
Cj

Copy client with open items FI, stocks MM and balance from one client to

Hi Gurus,
I have a question , I want to copy client with next information:
1.- All Cuztomazing
2.- All master data
3.- Only open items FI-AR , FI-AP,
4.- Stocks MM available for production.
5.- Documents sales valids
6.- Complete Balance (fixed , available and current asset, etc.)
From one client to other client.
¿How can I do it?
I know that cuztomazing and master data it's possible, I need to find from 3 to 6 point if it's possible for copy tables or some trx complete this information.
This work it's because my company code changue NIF and information TAX , and I need to have a cut over for carry forward only the describe information.
Thank's a lot
Regards
Julio

Hi Julio,
How did you solve this? I need to perform exactly these steps.
I am very interested in 3, 4 and 6.
Thanks in advance.

Problem in logging in to newly created client in IDES mySAPERP ECC 6.0

Hi,
I have installed IDES mySAP ERP 2005 ECC6.0 and using client 800.I want to make a copy of the client 800.I created a new client 910 using SCC4.When I try to login to 910 using SAP* and password PASS (I tried both upper case and lower case) it does not allow. I also tried user SAP* with master password, 06071992, 19920706 and also the userid: idadmin and password: ides123 .But nothing worked. So I cannot proceed further in copying the client from 800 thro' SCCL. Can any one pls let me know what is the login ID and password that I need to use to get into the newly craeted client 910?
Thanks in advance,
V. Revathy

HI dear,
before logging into newly created cllient 910 you have to change the activate the kernal user SAP*
a) Set the profile parameter login/no_automatic_user_sapstar to 0.
b) Restart the application server.
c) Log on to the new client with kernel user SAP* and password PASS.
now do client copy. after finishing client copy again deactivate the kernel user SAP*
a) Reset login/no_automatic_user_sapstar to 1.
b) Restart the application server.
regards
abuzar

I installed Windows 7 in my Macbook pro, I can access Windows data in Mac, but I can't copy and delete it. and the same case while i am working in Windows. Could you please guide me if there is any solution, where I could copy/paste/delete my data.

I installed Windows 7 in my Macbook pro, I can access Windows data in Mac, but I can't copy and delete it. and the same case while i am working in Windows. Could you please guide me if there is any solution, where I could copy/paste/delete my data.

OS X can natively read NTFS of Windows, but not write to it.
Windows can't read or write to HFS+ of OSX, and that's a good thing from a security standpoint.
Ideally if you share files between operating systems you should have a FAT/MSDOS formated USB key or hard drive. (exFAT external drive if any of your files are over 4GB in size) both these formats are universal for OS X or Windows.
If you install software into Windows and OS X to read each others formats, then you have to pay to update/upgrade it deal with headaches.
If you swtich between Windows and OS X a lot, don't need full hardware performance for Windows, you may consider installing virtual machine software like VMFusion or Parallels which can take a copy of your Windows in Bootcamp and place it into OS X as a file then run that copy of Windows in a window in OS X like so.
Advantage here is you run most of your light weight Windows programs like this at the same time as OS X.
Benefit is you can run just about any Windows or Linux version and OSX server editions (not client versions)
Bootcamp only allows Windows 7, that's it now.
You'll also be interested in two fre pieces of software, Carbon Copy Cloner and Winclone on macupdate.com.
CCC clones OS X partition and Winclone clones the Bootcamp partition. Valuable for you.
Good Luck

Copy client with open items FI, stocks and balance

Hi Gurus,
I have a question , I want to copy client with next information:
1.- All Cuztomazing
2.- All master data
3.- Only open items FI-AR , FI-AP,
4.- Stocks MM available for production.
5.- Documents sales valids
6.- Complete Balance (fixed , available and current asset, etc.)
From one client to other client.
¿How can I do it?
I know that cuztomazing and master data it's possible, I need to find from 3 to 6 point if it's possible for copy tables or some trx complete this information.
This work it's because my company code changue NIF and information TAX , and I need to have a cut over for carry forward only the describe information.
Thank's a lot
Regards
Julio

Hi Julio,
How did you solve this? I need to perform exactly these steps.
I am very interested in 3, 4 and 6.
Thanks in advance.

How do you keep your VPN clients up to date?

Hi, how do you keep your Cisco VPN clients up to date? Our users connect to a Cisco 3015 Concentrator. It needs to be as automatic as possible.
Thanks

Check this link,
http://www.cisco.com/en/US/docs/security/vpn_client/cisco_vpn_client/vpn_cli
ent46/administration/guide/vcAch3.html
Example:
Steps to perform an automatic update for VPN client :
===================================================
1. Download update-4.8.00.0440-major-K9 file on your PC from the link below and unzip it.
http://www.cisco.com/cgi-bin/tablebuild.pl/vpnclient-3des
It will have the following files::
- binary_config.ini
- sig.dat
- vpnclient-win-is-8.00.0440-k9.exe
- vpnclient-win-msi-8.00.0440-k9.exe
2. Create a webserver with a folder and move all the above files to this folder on webserver.
3. Now on your vpn client create a new profile. This profile file will appear in the profiles folder of the vpn client. Copy this file to your desktop and zip it. Name the
zipped file as profiles.zip. Delete the profile from the client.
4. Make a copy of your binary_config.ini on your desktop. Rename it to new_update_config.ini. This is just to make sure its not saved as a txt file.
Open the above file and write the following on it:
[Autoupdate]
Required=1
5. Now move the new_update_config.ini and profiles.zip to the webserver. Once we browse to the webserver it should look like --
http://webserver/~razshah/vpn_profile_update462/
Index of /~razshah/vpn_profile_update462
Name Last modified Size Description
Parent Directory 09-Mar-2005 13:24 -
binary_config.ini 09-Mar-2005 13:26 1k
new_update_config.ini 11-Mar-2005 11:35 1k
profiles.zip 09-Mar-2005 13:26 1k
sig.dat 09-Mar-2005 13:26 2k
vpnclient-win-is-4.6..> 09-Mar-2005 13:26 7.6M
vpnclient-win-msi-4...> 09-Mar-2005 13:26 10.3M
6. The concentrator is configured as follows:
Client Type is Windows
URL http://webserver/~razshah/vpn_profile_update462
Revisions 4.6
7. On your PC go to the VPN Client > updates folder. Delete the update_config file if its already there. This folder should have only autoinstall (this file will be added if update works) autoupdate header files.
The update does take about 5 mins. To see the new file we have to close and reopen the client. Once connected make sure you are able to browse to the webserver and see all the files.
1- Auto update runs only on Windows 2000 and Windows XP, all other client types update manually. Windows NT users get notified and can get an update manually from the update server.
2- Remote users must have the VPN Client for Windows 4.6 or greater installed on their PCs to use the automatic update feature.
Regards,
~JG

Communication lost - Same installation, same version of client (.exe), but client has different configuration in Configuration Manager properties

Hi, I can't understand how I get the following different between old and newly installed client. On the left side it is the original client configuration and on the right side it is what client gets after installing the same version of CCMSETUP.EXE (5.00.7958.1000)
with SCCM 2012 R2.
Differences noticed:
-Catalog's name (in Software center) are different. New client has "IT Ogarnization" as name for their catalog.
-Configuration Manager Properties for new client doesn't have "Configurations" Tab.
-Many Components status in the components tab are different: CCM Notification Agent, Compliance and Settings Managment, Hardware Inventory Agent, Out of Band Mangement Agent...
With all this, I can't send Windows updates or any applications to ANY clients. The client status in the monitoring deployment always shows "Unknown".
I don't think it is on the client side, because I return to older VMware snapshot and see the different, after uninstalled and re-installed the SCCM agent, I get the new "problematic" client configuration.
Any suggestion to resolve my problem? Thank you in advance.
bsuperkid

Here the all three logs. Sorry to give them like that but I think it is best way to let you take a look. I did change some name and reference to hide my environment.
Also, I don't know if there a link with my problem, but I guess so.
- I noticed in Monitoring\System Status\Components Status\"Warning SMS_WSUS_SYNC_MANAGER", the following message (ID 6703):
WSUS Synchronization failed.
Message: Thread was being aborted.
Source:
Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS.
- I noticed in Monitoring\System Status\Components Status\ "Warning SMS_AD_SYSTEM_DISCOVERY_AGENT", the following message (ID 5203):
Active Directory System Discovery Agent reported errors for 2074 objects. DDRs were generated for 0 objects that had errors while reading non-critical properties. DDRs were not generated for 2074 objects that had errors while reading
critical properties.
Possible cause: The site server might not have access to some properties of this object. The container specified might not have the properties available.
Solution: Please verify the Active Directory schema for properties that are not replicated or locked.
Refer to the discovery logs for more information.
I'll upload a print screen of all three logs files. If you need it in text format, I'll upload them as the code Block.
Thank you again!
bsuperkid

Newly copied client has no data!

Similar Messages

Maybe you are looking for