Newly created item through personalization not visible

Hi All,
I have added on new item , in a page,
Howerver when I clicked apply on that item , once I define the required properties of the item.
I am getting this error
"Attachment item "%ITEM" has been created successfully, however, it does not have an Entity Map associated with it. To avoid a runtime error, please either create an Entity Map for this attachment item, or delete attachment item "%ITEM"."
I am not able to locate that item , anywhere * either in personalzied page nor in application page

I have gone to personalize page -> selected LOVRN -> create item ->
level - Site
Item Type - MessageLOVInput
Prompt - some custom prompt
Id - some custom id
External LOV- given exisitng seeded path for LOV with region name in the last
apply .
Then the error appeared as
Attachment item "%ITEM" has been created successfully, however, it does not have an Entity Map associated with it. To avoid a runtime error, please either create an Entity Map for this attachment item, or delete attachment item "%ITEM". appeared
After the above steps complete. I have again gone to personalization ->complete view . But I am not able to locate the item created in above mentioned steps.
One thing to note, I have tried creating new item , however everytime I am getting the above error after clicking on apply. In one occasion I have given incomplete path in the external LOV field mentioned above.(i.e. I forgot to mention the region Name )
Please help....

Similar Messages

  • Create Item column is not appearing in the "Personalize Page"

    Hi All,
    I am working in R12 upgrade project.
    I have to create item(Link) in a table region as per the requirement.
    But that "Create Item" button rather the column is not appearing in that "Personalize Page" when I click on the Personalize Page link of the concerned page.
    Can anyone please suggest Do I have to do any setup or any profile option needs to be enabled.
    Thanks,
    Raja Dutta

    Hi,
    Enable profile 'FND: Personalization Seeding Mode', clear the cache and check if this solves your problem.
    --Sushant                                                                                                                                                                                                                                                           

  • DIR through CV01n -not visible in easy DMS

    Dear all,
    1)I have created DIR through CV01n . But its not visible in public/private folder in the easy DMS. but when i do search the same DIR,  it is visible in search folder.when i am trying to move same DIR to public folder or any folder system has given a pop-up and asks  "do you want to like or copy this DIR " .
    wht is that?
    2) Is it possible to link the DIR directly to the folder at time of creation or uploading through browser or other method.
    kindly help

    Hi Harish,
    regarding your questions I have to inform you that the reason for this is that the create document info record is not inlcuded in the document BOM (e.g. header EDIPUBLICFOLDER). So you would have to add the new DIR to the document structure first.
    If you create a new document directly in EasyDMS then it will be automatically added to the related folder structure.
    In the backend I think you can use the new document browser functionality in CV01N to create new documents which are also just added to a document BOM.  Therefore please press the button 'Select Document via' in transaction CV01N and choose weither 'Browser' or 'Selection Screen and Browser'. In the context menu of the browser you will find to item 'Create'.
    Best regards,
    Christoph

  • BOM Item category column not visible into CS01

    Hi,
    Till yesterday we create BOM for FG component with item category L,
    But today while creatting BOM ,item category column is not visible so that it is not possible to create BOM.
    we have not make any changes into SPRO Regarding BOM,
    What will be the possible reason?
    Regards,
    Devendra

    Hi,
    Item category column was make invisible by someone during processing CO02 through SHD0.
    now it it makes visible.
    Regards,
    Devendra

  • New Price Updates for newly added Items Through VA02

    Hi All,
    Through VA02 ,If you change first date in line item we have written code in MV45AFZB(USEREXIT_NEW_PRICING_VBKD
    ) for updating price for that item.
    Now the issue is if u add one more new line item through VA02 itself..here we were not getting that line item detials.because its not yet saved.
    We want to update prices for newly added items also.

    Hi Reddy,
    For translation of any text , goto SE63 -> in menu TRANSLATION -> R/3 Enterprise - > Transport object -->
    for Transport Entry of Object : R3TR SHI3 ZABC
    then select target & source lang. click EDIT.
    Hope this helps you.
    Reagards,
    Aby

  • Order created but it is not visible.

    Hi Experts,
                      I came across a problem in which a user has created an order but he is not able to see the order through CIC0 and rest of the users are able to see the order.
    i want to know if it is an abap problem or it is related to BASIS or any solution for this.
    Thanks
    Trupti.
    Moderator message: too vague, help not possible, please describe problems in all technical detail when posting again.
    Edited by: Thomas Zloch on Oct 27, 2010 2:48 PM

    Hi de0021,
    Could you tell me what’s the meaning of the excel file is not visible? If it was opened as shown in the following figure without spreadsheet? Or it is a normal spreadsheet just without contents in the cells. And did you get any pop up message bar from file
    when you open it?
    You said the same file with other user’s account worked fine.
     I suggest to check if the permission of the user’s account on the network is different from other normal users’ accounts. If yes, try to modify this user’s permission and try again.
    Or this issue might be caused by DDE in excel. If you use Excel 2010 you might get an error when opening Excel or double clicking an Excel file that says “There Was a Problem Sending the Command to the Program”. Check if the user checked the checkbox “Ignore
    other applications that use Dynamic Data Exchange (DDE)”, as shown in the following figure.
    If possible could you take a screenshot and upload it so that we can get more accurate solutions to this problem. I am glad to help and forward to your reply.
    Hope it’s helpful.
    Regards,

  • Doc is created frm BAPI_DOCUMENT_CREATE2 but not visible in CV02N

    Hi Everyone,
    I have created document through BAPI_DOCUMENT_CREATE2 and given the input values as below
    DOCUMENTDATA:
            DOCUMENTTYPE-                   DES
    DOCUMENTDESCRIPTIONS:
            LANGUAGE -                      EN
            DESCRIPTION  -                  TESTING FROM BAPI
    OBJECTLINKS:
            OBJECTTYPE  -                  MARA
            OBJECTKEY   -                   1000 MILES
    DOCUMENTFILE:
            WSAPPLICATION -                 TXT
            DOCPATH -                           C:\USERS\V-KISHRK\DESKTOP
            DOCFILE -                               WSDL.TXT
    when i executed the function it returns Document number and other details, but when i check in CV01N with that document number
    it showing error like data is not exsists.
    DOCPATH and  DOCFILE  are from my desktop(local mechine).
    Please tell me what input values i need to give.
    Thanks,
    Kishore

    Yes,
    COMMIT WORK  is important.
    But the path should end with "\"
    Are you using parameter  pf_ftp_dest ?
    When working from local machine it should be: 'SAPFTP'
    When the application server shoul pull the document apply 'SAPFTPA' and place original in a share the application server can reach.
    Regards
    Daniel K.

  • Newly created sub-folder does not appear in correct location

    Hello, When I attempt to create a sub-folder in Finder the newly created folder is located at the bottom of the Documents drive and not within the folder I'd originally selected, eg:
    1) viewing the Finder in List view, selected a folder in the Documents Drive, eg DOCUMENTS / WORK
    2) from the "Action" button at the top of the Finder page I've selected "new folder" option
    3) A new folder has been created but it's placed at the bottom of the Documents drive, eg DOCUMENTS / UNTITLED FOLDER
    I've attempted this a number of times and always with the same results, is this bug occurring for all 10.5 users? I hope not because this is a shocker.
    Any advise or suggestions would be greatly appreciated.

    This appears to be a design decision, as when you're in list view, the current folder is the one displayed in the window. If you want it to work the way you think it should, use column view.
    (35826)

  • "Create Interactive Dashboard" button not visible

    Hi,
    For Administrator, under Manage Interactive Dashboards link, the "Create Interactive Dasboard" button is not visible. Where should it be configured.
    Regards,
    Sreekanth.

    Got it, i didnt create any shared folder!! :)
    thanks,
    Sreekanth.

  • New fields created in MDM Console not visible on Portal iViews

    Hi All
    I would like to ask you. I recently encouraged very strange and annoying problem. We are developing Vendor repository. Menatime we have created some iViews and pages on the Portal. All of them are displayed from Main table. We can see all fields and added/deleted records.
    However I can not add any new fields (from MDM Console main table) we have created. That is whired because I only can see all fields beeing in repository for long time now, but all new fields (from that same table) ar not visible on portal.
    I tried few options with creating new and different iViews. No help. All the time I can vise old fields from repository but new one are not available.
    Can you plase advice what is/ may be wrong?
    Thank you in advance.
    BR
    Rafal

    Hi All
    After restarting server problem solved. That mean there is a casching problem. After investigation here is service to restart:
    J2EE engine
    Thank you for help.
    BR
    Rafal
    Edited by: Rafal Paczynski on Sep 29, 2011 12:21 PM

  • Folder created in Windows Explorer not visible in Command Line as SYSTEM user

    Hello everyone,
    We have an odd behavior with an application installation, which I cannot make much sense of.
    We are trying to deploy an application on Windows 8.1 Enterprise x64 which tries to access
    C:\windows\system32\config\systemprofile\Desktop during installation.
    This folder does not exist by default in a Windows 8.1 installation. Hence we am creating this folder using a VBS script manually. The VBS script also launches the application EXE. The setup itself runs under the SYSTEM account (in order to be deployed using
    SCCM).
    When the install script is launched, we can see in the Windows Explorer that the "Desktop" folder is created in the systemprofile directory. However, to the setup running under the system account, this folder is not visible.
    I have verified this by running a command line prompt under the SYSTEM user and navigating to
    C:\windows\system32\config\systemprofile\. Using the "dir" command does not show you a "Desktop" folder under the EXACT same path.
    When we create the Desktop folder from this command prompt, the application installs just fine.
    What are we missing? Any inputs are highly appreciated.

    Hi,
    Might this need to quit the command prompt after the folder creation, then reload it to continue the installation of the software?
    Best regards
    Michael Shao
    TechNet Community Support

  • Newly Created items not seen when creating a quote

    Hi,
    I created a new item and now I am trying to add this item in the my new quote. I cannot find the item. Is there any concurrent program or any setup I need to do so that it reflects in the quotes. Please help as I am new to this and not aware of the functional setups for this.
    Thanks in advance.
    Regards,
    Bm

    Hi,
    Please review the following document:
    Cannot find items to add to a Quote (Doc ID 340933.1)
    Excerpt from this document:
    1. Determine where the application is searching for the item by checking the value for the profile 'ASO: Enable Intermedia Search'
         If set to Yes - both the interMedia Search and Inventory tables are searched
         If set to No  - only the Inventory table is searched
         Note:  In R12, the HTML UI will always use the interMedia search.
    2. Verify the inventory item meets the following criteria:
    A) The current date must be within the start and end date range set for the product
    B) The product must be valid for the inventory organization of the operating unit in which the quote is created.
    C) The product must be in the default category set defined for/in the functional area "Order Management."
    Inventory Organization is determined as follows:
    - Quoting UI first reads the value of profile ASO: Category Set.
    - If this profile is not set, it reads from OM functional area.
        (Navigation -> OM > Setup > Items > Categories > Default Category Sets)
    using the OM responsibility which points to the same OU as the Quoting responsibility.
    D) The product must have the "Customer Orders Enabled" flag enabled..
    E) The BOM Item Type must be Model or Standard.
    F) The Primary UOM is not ENR.
    3. If the interMedia search is enabled, make sure the iStore Search Insert concurrent program was run to populate the interMedia search table.
      See Note 261454.1 - 'How to reduce the number of records inserted by iStore Search Insert?'  for information on the profiles that determine which items are inserted into this table by the program.
      See Note 1263758.1 - How To Locate which Responsibility the iStore Search Insert Concurrent Program can be run from?
    Note: Only interMedia Search is supported in R12 HTML Quoting.  Hence, it is enabled by default.
    Additional troubleshooting queries are in this document.
    Regards,
    Debbie

  • Personalization: Newly Created Item to be Validated

    Hi,
    How can I include a validation to a new item in OAF personalization?
    My requirement is to enable this new item only when TYPE = 'Yes' and disable when TYPE <> 'Yes'. This TYPE field varies for different records.
    Thanks!
    N
    Edited by: user8427607 on 12/08/2009 00:20

    Hi,
    Is this a Standard page OR a custom one???
    If it's a standard one then you have to extend the controller. Validation part can't be done by Personalization.
    Thanks
    --Anil                                                                                                                                                                                                                                                                                                                                                                               

  • List: Scrolled item's label not visible. Help!

    I've created a subclass of List so that I can scroll through the list without the use of scrollbars.  The test application is spin-off of the List sample app.  But when using the buttons to scroll down or up, some of the items in the list are not being shown properly.
    Does anyone know how get the labels of the list items to refresh themselves, or, is there a better approach for performing the manual scrolling so that this doesn't happen?
    Here is the code I'm using to do the scrolling. This is in the subclass of List...
                public function scrollUp(timerEvent:TimerEvent):void {
                    if (_position > 0) {
                        _position = _position - 1;
                        scrollVertically(_position, 1, false);
                    } else {
                        stopScrolling();
    Attached are the files ManuallyScrolledList.mxml and the application that drives it.
    Thanks in advance for any comments or suggestions.

    The label associated with an LOV entry for a Select List.
    If I have a list of areas, say defined as
    STATIC:Hobbiton;1,Bywater;2,Harbottle;3and a branch to a page with a report region showing a report based on the value of the area select list, I want a dynamic region title to show Results for Hobbiton rather than Results for 1, which is what you get if using a title defined as
    Results for &P2_AREA.

  • PO created though BAPI 'BAPI_PO_CREATE1' not visible in WPOHF4D

    Hi Experts,
    As per the client requirement, I am using BAPI 'BAPI_PO_CREATE1' to create PO. My client is using retail transactions majorly and wants to see the created PO in tcode WPOHF4D. The PO created using this BAPI are visbible in Me22n, but not in WPOHF4D.
    Can you please let me know what has to be done to see the generated POs in WPOHF4D?
    Below is the part of code where I am filling the stuctures to be passed to BAPI:
    *Filling header
          lwa_poheader-SALES_PERS = lwa_datatab-ihrez.
          lwa_poheader-doc_type = lwa_datatab-bsart.
          lwa_poheader-doc_date = lwa_datatab-bedat.
          lwa_poheader-comp_code = lwa_datatab-bukrs.
          lwa_poheader-purch_org = lwa_datatab-ekorg.
          lwa_poheader-pur_group = lwa_datatab-ekgrp.
          lwa_poheader-vendor = lwa_datatab-lifnr.
          lwa_poheader-currency = lwa_datatab-waers.
          lwa_poheader-pmnttrms = lwa_datatab-zterm.
          lwa_poheader-exch_rate = lwa_datatab-wkurs.
          lwa_poheader-ex_rate_fx = lwa_datatab-kufix.
          lwa_poheader-incoterms1 = lwa_datatab-inco1.
          lwa_poheader-incoterms2 = lwa_datatab-inco2.
    *Filling Purchase Order Header Data (Change Parameter)
          lwa_poheaderx-SALES_PERS  = v_true.
          lwa_poheaderx-doc_type  = v_true.
          lwa_poheaderx-doc_date  = v_true.
          lwa_poheaderx-comp_code  = v_true.
          lwa_poheaderx-purch_org  = v_true.
          lwa_poheaderx-pur_group  = v_true.
          lwa_poheaderx-vendor  = v_true.
          lwa_poheaderx-currency  = v_true.
          lwa_poheaderx-pmnttrms  = v_true.
          lwa_poheaderx-exch_rate  = v_true.
          lwa_poheaderx-ex_rate_fx  = v_true.
          lwa_poheaderx-incoterms1  = v_true.
          lwa_poheaderx-incoterms2  = v_true.
    *Filling Item
          lwa_poitem-po_item = lv_po_index.
          lwa_poitem-material = lwa_datatab-matnr.
          lwa_poitem-quantity = lwa_datatab-menge.
          lwa_poitem-po_unit = lwa_datatab-meins.
          lwa_poitem-net_price = lwa_datatab-netpr.
          lwa_poitem-trackingno = lwa_datatab-bednr.
          lwa_poitem-preq_name = lwa_datatab-afnam.
          lwa_poitem-plant = lwa_datatab-werks.
          lwa_poitem-tax_code = lwa_datatab-mwskz.
          lwa_poitem-ret_item = lwa_datatab-ret_item.
          lwa_poitem-po_price = '2'.
          APPEND lwa_poitem TO lt_poitem.
    *Filling Item Data (Change Parameter)
          lwa_poitemx-po_item = lv_po_index.
          lwa_poitemx-material  = v_true.
          lwa_poitemx-quantity  = v_true.
          lwa_poitemx-po_unit  = v_true.
          lwa_poitemx-net_price  = v_true.
          lwa_poitemx-trackingno  = v_true.
          lwa_poitemx-preq_name  = v_true.
          lwa_poitemx-plant  = v_true.
          lwa_poitemx-tax_code  = v_true.
          lwa_poitemx-ret_item = v_true.
          lwa_poitemx-po_price = v_true.
          APPEND lwa_poitemx TO lt_poitemx.
    *Filling schedule line
          lwa_poschedule-po_item = lv_po_index.
          lwa_poschedule-delivery_date = lwa_datatab-eindt.
          APPEND lwa_poschedule TO lt_poschedule.
    *Filling Delivery Schedule (Change Parameter)
          lwa_poschedulex-po_item = lv_po_index.
          lwa_poschedulex-delivery_date = v_true.
          APPEND lwa_poschedulex TO lt_poschedulex.
    Filling Partner
          IF lwa_datatab-lifn2 IS NOT INITIAL.
            lwa_popartner-partnerdesc = v_partner_desc.
            lwa_popartner-langu = 'EN'.
            lwa_popartner-buspartno = lwa_datatab-lifn2.
            APPEND lwa_popartner TO lt_popartner.
          ENDIF.
    Filling Conditions in Purchase Order
          IF lwa_datatab-kbetr1 IS NOT INITIAL.
            lwa_pocond-itm_number = lv_po_index.
            lwa_pocond-cond_type = v_cond1_zvol.
            lwa_pocond-cond_value = lwa_datatab-kbetr1.
            lwa_pocond-currency = lwa_datatab-waers.
            lwa_pocond-change_id = c_insert_flg.
            APPEND lwa_pocond TO lt_pocond.
          ENDIF.
          IF lwa_datatab-kbetr2 IS NOT INITIAL.
            lwa_pocond-itm_number = lv_po_index.
            lwa_pocond-cond_type = v_cond2_zcdq.
            lwa_pocond-cond_value = lwa_datatab-kbetr2.
            lwa_pocond-currency = lwa_datatab-waers.
            lwa_pocond-change_id = c_insert_flg.
            APPEND lwa_pocond TO lt_pocond.
          ENDIF.
    Filling Conditions (Items, Change Parameter)
          IF lwa_datatab-kbetr1 IS NOT INITIAL.
            lwa_pocondx-itm_number = lv_po_index.
            lwa_pocondx-cond_type = v_true.
            lwa_pocondx-cond_value  = v_true.
            lwa_pocondx-currency = v_true.
            lwa_pocondx-change_id = v_true.
            APPEND lwa_pocondx TO lt_pocondx.
          ENDIF.
          IF lwa_datatab-kbetr2 IS NOT INITIAL.
            lwa_pocondx-itm_number = lv_po_index.
            lwa_pocondx-cond_type = v_true.
            lwa_pocondx-cond_value  = v_true.
            lwa_pocondx-currency = v_true.
            lwa_pocondx-change_id = v_true.
            APPEND lwa_pocondx TO lt_pocondx.
          ENDIF.
    <removed by moderator>. Would really appreciate if someone helps.
    Thanks,
    Priyanka
    Edited by: Thomas Zloch on Apr 1, 2011 2:16 PM - standard priority

    hi Priyanka,
    In the T-code WPOHF4D
    the select query
    SELECT ekkolifnr ekkoekorg ekgrp ekko~ebeln pohf_type
                  ekko~fixpo waers frgrl frgsx submi
              ekkobsart ekkobstyp ekkobedat ekpowerks ekko~otb_status
                 netwr stapo menge ekpo~loekz                   "959448
          APPENDING CORRESPONDING FIELDS OF TABLE lt_worklist_loop
          FROM ekpo INNER JOIN ekko
            ON ekkoebeln = ekpoebeln
          WHERE ekko~ebeln  IN it_ran_ebeln
            AND ekgrp       IN it_ran_ekgrp
            AND ekko~ekorg  IN it_ran_ekorg
            AND ekko~bukrs  IN it_ran_bukrs
            AND matnr       IN it_ran_matnr
            AND ekpo~werks  IN lt_ran_werks
            AND ekko~lifnr  IN it_ran_lifnr
            AND bedat       IN it_ran_bedat
            AND ekko~fixpo  IN it_ran_fixpo
            AND pohf_type   IN it_ran_pohf_type
            AND bsart       IN it_ran_bsart
            AND submi       IN it_ran_submi
            AND ernam       IN it_ran_uname
            AND source_id   IN it_ran_source_id               
            AND ekko~bstyp  =  c_po
            AND ekko~bsakz  <> c_bsakz_transfer. 
    is responsible for data fetching.
    If u r not getting data and this query failing check it while debugging.
    Thanks,
    Gaurav.

Maybe you are looking for

  • How can I get songs back on an album that are lost?

    I recently bought an album on itunes and it downloaded on to "family" account. I then downloaded my purchased content on to my phone with no trouble. When I later went to listen to the album, I could only listen to 1 out of the 12 songs. All the othe

  • Hp Officejet Pro 8600 on Windows 8.1 driver not installed

    Using Windows 8.1 and HP Officejet pro 8600.  The printer is installed on a wireless network.  But on Device Manager, it says "driver not installed".   Most printing tasks are successful, but for some I need to have the driver installed on the comput

  • Problem compiling bankapp with pro c

    I'm having difficulty using pro c to build the bank var .ec files. I'm pretty confident I have proc configured correctly, as I am able to build the oracle samples. I am getting a very strange group of errors when I try to precompile the .ec files. Th

  • My mail account keeps getting stuck with all mails that has a attachment on it

    my mail account keeps getting stuck trying to open mails with any attachments on it. I just upgraded to lion

  • OBIEE custom formatting/threshold

    Hello, While performing the custom formatting, instead of changing color and font, adding image ,can we add text like HIGH, LOW, MEDIUM etc. For example: if some metrics have its value greater than $5000 then instead of changing its color i want to a