Newly created layout profile not showing up in Select Profile window

Dear experts,
Background information - NetWeaver 7.0 SP15
I'm learning customizing KM layout and have created a new layout profile, which is based upon a layout set with a HTML Collection Renderer. However, when I tried to test it by assigning it to a subfolder that I created in BIUserhome folder, I can't find the new profile listed in the Select Profile window. It shows up in selection list, though, if I try to set default layout profile. Can anybody be so kind to enlighten me on this? Would I need to restart the instance in order to see the new profile?
Thank you very much in advance!
Hsiao

Hi Patricio,
Thank you for your reply. My post did not elicit any response until now.
As I could not have the layout profile coming up, I next tried the HTML Collection Renderer with layout sets. When I tried preview a path with the layout set, the layout set was not used as expected due to some error. Instead, the default layout set took over. I have a follow-up post that describes the issue (https://www.sdn.sap.com/irj/sdn/thread?messageID=804745) in case you may have an idea about the cause.
Later these issues kind of went away for reasons I'm not aware of. I haven't gone back to set up another profile again yet. But newly-created layout sets are showing up in the dropdown now.
Thank you for your other advice on using layout sets and layout profiles. I appreciate your input.
Regards
Hsiao

Similar Messages

Newly created task does NOT show up at SOLMAN project

We have CHARM configured.
However, the newly created task cannot be seen at SOLAMN's project. The existing tasks showed without issues.
What could be the reason? Thanks!!

Hi Christy,
Please refer to the spro configuration at following path:
Scenario specific setting --> change request management -->extended config --> schedule manager
Also refer to SAP note 927124.
Hope this helps!
Thanks & Regards,
Kriti Bhalla

OBIEE : Newly created rpd file not showing in the online mode in Admin tool

Hi,
I have recently installed OBIEE 10.1.3.4.2 and Oracle XE databse in a Windows XP (Professional version 2002 Service Pack 3) virtual machine on my Windows 7 machine.
1) I have create an rpd file in Admin tool (all three layers). But I can only load this rpd file in offline mode, not in online mode.
a)Saved the file sanjay1.rpd in c:\OracleBI\server\Repository directory
b)Updated the c:\OracleBI\server\config\NQSConfig.ini (commented out the existing Star entry and replaced it with Star = sanjay1.rpd, DEFAULT;),
c)Modified the C:\OracleBIData\web\config\instanceconfig.xml and made change to the CatalogPath entry (<CatalogPath>C:/OracleBIData/web/catalog/sanjay1</CatalogPath>)
d)Stopped and restarted OC4J, “Oracle BI Presentation Server” and “Oracle BI Server” services.
But I am still not able to load sanjay1.rpd in the Admin tool in the online mode. It is showing up only in the offline mode. What do I need to do load the file in the online mode.
2)The existing Start entry in NQSConfig.ini was Star = samplesales.rpd, DEFAULT before I updated it. But samplesales.rpd is not showing up in online mode either. When I am selecting File/Open/Online a popup is coming up with title "Open Online AnalyticsWeb" and prompting to enter Administrator password. I would like to know why samplesales.rpd was not showing up in online mode and where is AnalyticsWeb coming from.
Thanks
Sanjay

Dear Muram,
Is did not work.
1)Wihile the servers were running I opened the rpd in offline mode. It displayed the message the file can only be opened in the Read-Only mode. I accepted the message, opened the file and clsoed it and exited from Admin tool. I stopped the 2 services “Oracle BI Presentation Server” and “Oracle BI Server” in that order, and restrated them in the reverse order. In the admin tool it is still showing in the offline mode only
2)I have as such no interest in AnalyticsWeb that is showing in the online mode. I did not create it, it must have been installed along with OBIEE. But I am curious where it is coming from. Because A)There is no rpd file for AnalyticsWeb in the Repository Directory B)Before I edited the NQSConfig.ini the default setting was samplesales.rpd. So AnalyticsWeb was never included in the NQSConfig.ini file C) samplesales.rpd was included in the NQSConfig.ini once, but it never showed up online.
Thanks
Sanjay

Problem with newly created CM Repository NOT showing in Repositories Link

I am new to the Portal and this is the first time that I have created a CM Respository that is reaching out to a network drive (on a different domain and different server, our Platform is Windows). Here is what I have done so far...
1. Created a Windows file share
2. Configured a new CM Respository Manager (Persistence Mode FSDB)
I did the setup via System Administration, System Configuration, Knowledge Management, Content Management, Repository Managers, CM Repository.
It said it was created successfully but when I go into System Administration, System Configuration, Knowledge Management and then click on the link for "Repositories" (in the 3rd level navigation) it does not show up?
I restarted the service and still no luck...
How do I troubleshoot this??? I am not sure where to begin. Please be very detailed as this stuff is new to me.
Thanks,
Tom

I tried that and still no luck. Here is the interesting thing:
- If I change the DataBase mode to "DB", I get a green light in the monitor and it shows up properly within the Repository.
- If I change the Database mode to "FSDB, I get a Red light in the monitor and it shows and incorrect path
      "Startup Error: could not create directory:
172.xx.x.xx\folders\Root\Versions\versions"
      My actual path for "Root Directory" is "//172.xx.x.xx/folders/Root"
      The IP address is correct but where is the rest of this path coming from???
- If I change the Database mode to DBFS, I get a Red light in the monitor and it shows an incorrect path
      "Startup Error: folder
172.xx.x.xx\folders\Root does not exist"
      My actual path for "Root Directory" is "//172.xx.x.xx/folders/Root"
      The folder does actually exist.
So confused...

Newly created Web repository not showing up in explorer

I'm trying to create an index which would finally enable me to search the 'CNN' website (following the 'how to' document : 'HOW TO SET UP A WEB REPOSITORY AND CRAWLING IT FOR INDEXING'). I'm unable to assign the web repository which I created in an earlier step to the index because it doesn't show up in the repository/folder listing. I can't even see it under 'Content Administration -> KM Content -> Repositories'.
What exactly am I doing wrong?!
thanks,
Biju.

Hi Karsten,
- We're on EP6 SP2.
- Yes, I'm referring to the document you mentioned.
- Yes, the repository does show up with a green light under KM -> Component Monitor.
BTW, I was able to bring up the web repository now that I've specified under 'System Admin ® System Config ® Service Config ® Applications ® com.sap.portal.ivs.httpservice ® Services ® proxy ® HTTP-Bypass Proxy Servers' that everything under 'mycompany.com' must be bypassed. I'd originally specified the proxy set up in the TREX configuration, which runs on another (physical) server than the portal.
I don't really get the connection, but essentially took the cue from the earlier reply I got.
So, in short, I think the problem is solved at least for the moment.
Thanks again for your help.

Can someone please tell me how to view a newly created Genius playlist (not via Up Next, but as a stand-alone playlist)? Thank you!

Can someone please tell me how to view a newly created Genius playlist (not via Up Next, but as a stand-alone playlist)? Thank you!

>> then I get a completely blue screen.
That probably means that you're not looking at a bug in Photoshop, but a problem with a driver - and the most likely cause would be your video card driver.
And sure enough, your video card driver is almost 2 years out of date.
Please go to NVidia's website and get the latest driver - then follow their directions for installation (so you don't get bits of old driver left over).

Some emails not deleting or not showing up in my Mail window.

My Mail program is having many problems--Some emails will be deleted but show up again when I reopen my Mail window, I cannot see emails in my draft folder, and there are times when emails sent to me are not showing up in my Mail window. I've redownloaded the mail program using my Tiger disk three times, but it never solves the problem. I'm about to reload my whole Tiger software, but I'm afraid I'll lose my 10.4.7 updates.
iMac G4 Mac OS X (10.4.7)
iMac G4 Mac OS X (10.4.7)

OK. In order to fix the problem, we need to re-create the index. Problem is, Mail may or may not choke on those messages while re-creating the index, so either be prepared for it or perform the optional steps 1 and 3:
1. (Optional, but recommended). Try to find in ~/Library/Mail/POP-username@mailserver/INBOX.mbox/Messages/ the *.emlx files associated with the troublesome messages. Viewing the *.emlx files as List in the Finder showing the creation/modification date may help. Just identify them; do not get rid of them yet (you must quit Mail first).
2. Quit Mail.
3. (Optional, but recommended). If you found the troublesome *.emlx files in step 1, move them to the Trash.
4. In the Finder, go to ~/Library/Mail/. Make a backup copy of this folder, just in case something goes wrong -- e.g. by dragging it to the Desktop while holding the Option (Alt) key down.
5. Locate the Envelope Index file and move it to the Trash. If you see an Envelope Index-journal file there, delete it as well.
6. In the Finder, go to ~/Library/Mail/POP-username@mailserver/. Locate Deleted Messages.mbox, and move it to the Trash. I assume there is nothing to be preserved there.
7. In the Finder, go to ~/Library/Mail/Mailboxes/. Locate the *.mbox folder that corresponds to the mailbox you created to try to isolate the troublesome messages, and move it to the Trash. Again, I assume there is nothing to be preserved there.
8. Open Mail. It will tell you that your mail needs to be "imported". Click Continue and Mail will proceed to re-create Envelope Index -- Mail says it's "importing", but it just re-creates the index if the mailboxes are already in Mail 2.x format.
Note: For those not familiarized with the ~/ notation, it refers to the user's home folder.

I would like to use time Machine to back up to a network SMB drive. I can see the drive on my desktop but it will not show in the time machine window to be able to select it

I currently have a mini server (OSX10.8.5, server 2.2.2) that I am using Time Machine to back up 4 external drives that are connected to the server via firewire 800. I would like to use Time Machine to back up to a windows network SMB drive. I can see the drive on my desktop but it will not show in the time machine window to be able to select it for use.
Can this be done
Thanks for any and all help

The supported targets for Time Machine backups are local (direct-connected) disks, and network targets include Time Capsule, a disk hanging off the current-generation AirPort (though not earlier AirPort devices), and OS X Server systems.
The Time Machine storage is based on the HFS+ file system, so I would not expect TM to work with SMB file services.
While there are hacks to allow Time Machine to access network drives, I would not consider those to be reliable. Skim the forum and the 'net for related details, and for previous discussions of setting this up and the related issues that can arise.
Remember to test the recovery with whatever you decide to use; whole point of backups is the ability to restore the data, after all.
If you want to learn more about Time Machine, Pondini is an excellent resource.

I can't synch my iPhone with iTunes because the device does not show up in a device window when I plug it in...it's missing in action and thus I'm not able to add any content from the iTunes to my iPhone, e.g. podcasts

I can't synch my iPhone with iTunes because the device does not show up in a device window when I plug it in...it's missing in action and thus I'm not able to add any content from the iTunes to my iPhone, e.g. podcasts. All the instructions on synching start with "find your device in the device window". But what if you have no device window?

Missing "message" from above: The iPad "DGMTR" is synced with another iTunes library on DGMTR's MacBook Pro. Do you want to erase this iPad and sync with this iTunes library? An iPad can be synched with only one iTunes library at a time. Erasing and syncing replaces the contents of this iTunes library.
I thought the libraries were the same.

My iPhone is not showing up in iTunes, or Windows Explorer.

I have looked around searching and tried to uninstall everything that had anything to do with Apple and iTunes. Nothing worked. I also have gone into the computer managment and stopping and starting the apple managment and iPod service. Still, nothing worked. My iPhone will not show up in iTunes, nor Windows Explorer, when I plug it in I can hear the sound that when a device gets plugged into the computer.

It sounds like you have a bad USB driver for the phone. That software is installed with iTunes. Like I said earlier, you need to make sure to uninstall everything using that support document. That clears out all Apple software. Do that without the phone attached to the computer of course. Once you have reinstalled everything, then try and connect it. It should load the USB driver and begin to work.
Let me ask you this. How many pictures do you have in the camera roll? If you have a large number of them and you have not imported them to the computer, there could be a corrupt picture causing you some problems. While that was known in the past to cause syncing problems, I thought that was fixed. If after you uninstalled iTunes the phone was recognized as a camera, I suggest importing the pictures and then deleting them from the camera roll and try the process all over with uninstalling and reinstalling iTunes. See if that helps.

Ipod touch will not show up in my computer windows 7

My ipod touch will not show up in my computer ( windows 7 ) how do you resolve this issue ?

Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Photoshop CS6 is not showing any network drives within windows 8.1.

Photoshop CS6 is not showing any network drives within windows 8.1, I can only browse the local disk for files. Please advise?
And when i try opening a file directly from the network, photoshop starts but does not open the selected file?

The dialog you show there looks like it may be a CS6 open dialog running on windows 8.1 that is showing what is local. Network is not highlighted selected.
Here is a CC Open one windows 7 pro showing areas of what is accessible.

HT1481 my ipod shuffle is not showing up in my itunes window on the right hand side of the screen

My Ipod shuffle is not showing up on my Itunes window on the right hand side of the screen? It is a new one.

Hi Brittcal,
Welcome to the Support Communities!
I would recommend making sure you've run your Windows software updates, and then follow the steps to remove iTunes and reinstall the latest version. Here are a few articles to help you with this.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Syncing music to iPod shuffle
http://support.apple.com/kb/HT1719
I hope this information helps ....
Have a great day!
- Judy

My icloud songs not showing up in my itunes window even though itunes match is turned on

my icloud songs not showing up in my itunes window even though itunes match is turned on

I Am having a similar issue with my husbands iTunes match. I restored a 2011 iMac and decided to download all my husbands music via iTunes match. Apart from taking ages, he only has 2,500 songs on the match, it greyed out lots of songs, which later I found out said that they were 'waiting' also, loads are missing. I tried following someone else's thread and tried to delete the greyed out ones so I can download again but I fear I may have completely deleted them. Also, I have a lot of duplicates, both on iCloud and both downloaded! What's happening? My iTunes appear to be behaving ok!

How to create a form and show it as a modal window in VB6?

oform.modal -> modal is read-only property
help,please.

Hi Santiago!
HTH: How to create a form and show it as a modal window?

Newly created layout profile not showing up in Select Profile window

Similar Messages

Maybe you are looking for