Newly created Web repository not showing up in explorer

I'm trying to create an index which would finally enable me to search the 'CNN' website (following the 'how to' document : 'HOW TO SET UP A WEB REPOSITORY AND CRAWLING IT FOR INDEXING'). I'm unable to assign the web repository which I created in an earlier step to the index because it doesn't show up in the repository/folder listing. I can't even see it under 'Content Administration -> KM Content -> Repositories'.
What exactly am I doing wrong?!
thanks,
Biju.

Hi Karsten,
- We're on EP6 SP2.
- Yes, I'm referring to the document you mentioned.
- Yes, the repository does show up with a green light under KM -> Component Monitor.
BTW, I was able to bring up the web repository now that I've specified under 'System Admin ® System Config ® Service Config ® Applications ® com.sap.portal.ivs.httpservice ® Services ® proxy ® HTTP-Bypass Proxy Servers' that everything under 'mycompany.com' must be bypassed. I'd originally specified the proxy set up in the TREX configuration, which runs on another (physical) server than the portal.
I don't really get the connection, but essentially took the cue from the earlier reply I got.
So, in short, I think the problem is solved at least for the moment.
Thanks again for your help.

Similar Messages

Problem with newly created CM Repository NOT showing in Repositories Link

I am new to the Portal and this is the first time that I have created a CM Respository that is reaching out to a network drive (on a different domain and different server, our Platform is Windows). Here is what I have done so far...
1. Created a Windows file share
2. Configured a new CM Respository Manager (Persistence Mode FSDB)
I did the setup via System Administration, System Configuration, Knowledge Management, Content Management, Repository Managers, CM Repository.
It said it was created successfully but when I go into System Administration, System Configuration, Knowledge Management and then click on the link for "Repositories" (in the 3rd level navigation) it does not show up?
I restarted the service and still no luck...
How do I troubleshoot this??? I am not sure where to begin. Please be very detailed as this stuff is new to me.
Thanks,
Tom

I tried that and still no luck. Here is the interesting thing:
- If I change the DataBase mode to "DB", I get a green light in the monitor and it shows up properly within the Repository.
- If I change the Database mode to "FSDB, I get a Red light in the monitor and it shows and incorrect path
      "Startup Error: could not create directory:
172.xx.x.xx\folders\Root\Versions\versions"
      My actual path for "Root Directory" is "//172.xx.x.xx/folders/Root"
      The IP address is correct but where is the rest of this path coming from???
- If I change the Database mode to DBFS, I get a Red light in the monitor and it shows an incorrect path
      "Startup Error: folder
172.xx.x.xx\folders\Root does not exist"
      My actual path for "Root Directory" is "//172.xx.x.xx/folders/Root"
      The folder does actually exist.
So confused...

Newly created layout profile not showing up in Select Profile window

Dear experts,
Background information - NetWeaver 7.0 SP15
I'm learning customizing KM layout and have created a new layout profile, which is based upon a layout set with a HTML Collection Renderer. However, when I tried to test it by assigning it to a subfolder that I created in BIUserhome folder, I can't find the new profile listed in the Select Profile window. It shows up in selection list, though, if I try to set default layout profile. Can anybody be so kind to enlighten me on this? Would I need to restart the instance in order to see the new profile?
Thank you very much in advance!
Hsiao

Hi Patricio,
Thank you for your reply. My post did not elicit any response until now.
As I could not have the layout profile coming up, I next tried the HTML Collection Renderer with layout sets. When I tried preview a path with the layout set, the layout set was not used as expected due to some error. Instead, the default layout set took over. I have a follow-up post that describes the issue (https://www.sdn.sap.com/irj/sdn/thread?messageID=804745) in case you may have an idea about the cause.
Later these issues kind of went away for reasons I'm not aware of. I haven't gone back to set up another profile again yet. But newly-created layout sets are showing up in the dropdown now.
Thank you for your other advice on using layout sets and layout profiles. I appreciate your input.
Regards
Hsiao

OBIEE : Newly created rpd file not showing in the online mode in Admin tool

Hi,
I have recently installed OBIEE 10.1.3.4.2 and Oracle XE databse in a Windows XP (Professional version 2002 Service Pack 3) virtual machine on my Windows 7 machine.
1) I have create an rpd file in Admin tool (all three layers). But I can only load this rpd file in offline mode, not in online mode.
a)Saved the file sanjay1.rpd in c:\OracleBI\server\Repository directory
b)Updated the c:\OracleBI\server\config\NQSConfig.ini (commented out the existing Star entry and replaced it with Star = sanjay1.rpd, DEFAULT;),
c)Modified the C:\OracleBIData\web\config\instanceconfig.xml and made change to the CatalogPath entry (<CatalogPath>C:/OracleBIData/web/catalog/sanjay1</CatalogPath>)
d)Stopped and restarted OC4J, “Oracle BI Presentation Server” and “Oracle BI Server” services.
But I am still not able to load sanjay1.rpd in the Admin tool in the online mode. It is showing up only in the offline mode. What do I need to do load the file in the online mode.
2)The existing Start entry in NQSConfig.ini was Star = samplesales.rpd, DEFAULT before I updated it. But samplesales.rpd is not showing up in online mode either. When I am selecting File/Open/Online a popup is coming up with title "Open Online AnalyticsWeb" and prompting to enter Administrator password. I would like to know why samplesales.rpd was not showing up in online mode and where is AnalyticsWeb coming from.
Thanks
Sanjay

Dear Muram,
Is did not work.
1)Wihile the servers were running I opened the rpd in offline mode. It displayed the message the file can only be opened in the Read-Only mode. I accepted the message, opened the file and clsoed it and exited from Admin tool. I stopped the 2 services “Oracle BI Presentation Server” and “Oracle BI Server” in that order, and restrated them in the reverse order. In the admin tool it is still showing in the offline mode only
2)I have as such no interest in AnalyticsWeb that is showing in the online mode. I did not create it, it must have been installed along with OBIEE. But I am curious where it is coming from. Because A)There is no rpd file for AnalyticsWeb in the Repository Directory B)Before I edited the NQSConfig.ini the default setting was samplesales.rpd. So AnalyticsWeb was never included in the NQSConfig.ini file C) samplesales.rpd was included in the NQSConfig.ini once, but it never showed up online.
Thanks
Sanjay

Newly created task does NOT show up at SOLMAN project

We have CHARM configured.
However, the newly created task cannot be seen at SOLAMN's project. The existing tasks showed without issues.
What could be the reason? Thanks!!

Hi Christy,
Please refer to the spro configuration at following path:
Scenario specific setting --> change request management -->extended config --> schedule manager
Also refer to SAP note 927124.
Hope this helps!
Thanks & Regards,
Kriti Bhalla

Can someone please tell me how to view a newly created Genius playlist (not via Up Next, but as a stand-alone playlist)? Thank you!

Can someone please tell me how to view a newly created Genius playlist (not via Up Next, but as a stand-alone playlist)? Thank you!

>> then I get a completely blue screen.
That probably means that you're not looking at a bug in Photoshop, but a problem with a driver - and the most likely cause would be your video card driver.
And sure enough, your video card driver is almost 2 years out of date.
Please go to NVidia's website and get the latest driver - then follow their directions for installation (so you don't get bits of old driver left over).

Webpage does not show in Internet Explorer but does show in all other browsers?

I have created a webpage, www.nqms.co.uk, it does not show on Internet Explorer. I have tried to troubleshoot via the net and have used a CSS check program etc. but it still won't appear. Any help would be gratefully received.

Add the closing --> comment tag to your css section before the closing </style> tag (see below)
.style3 {font-size: 8pt}
-->
</style>

External WD Hard Drive Not Showing In File Explorer

My External WD ( 500GB My Passport) Hard drive Is Not showing In File Explorer...I Have Tried Re-installing It But Nothing Worked....Any Idea About Solving This Problem Without Losing Any Data ?

My External WD ( 500GB My Passport) Hard drive Is Not showing In File Explorer...I Have Tried Re-installing It But Nothing Worked....Any Idea About Solving This Problem Without Losing Any Data ?
a lot of these USB disks are garbage. Remove the hard disk from the case and connect it to an available desktop which will be able to read the disk.
the cheap usb controllers are often the cause of the problem
Corsair Carbide 300R with window
Corsair TX850V2 70A@12V
Asus M5A99FX PRO R2.0 CFX/SLI
AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
G.SKILL RipjawsX DDR3-2133 8 GB
EVGA GTX 6600 Ti FTW Signature 2(Gk104 Kepler)
Asus PA238QR IPS LED HDMI DP 1080p
ST2000DM001 & Windows 8.1 Enterprise x64
Microsoft Wireless Desktop 2000
Wacom Bamboo CHT470M
Place your rig specifics into your signature like I have, makes it 100x easier to understand!
Hardcore Games Legendary is the Only Way to Play!

Inserted html not showing in Internet Explorer

Inserted html code does not show in internet Explorer 8. Is OK with Firefox, Safari and Chrome. Site is munroestudios.com. Also made a a test page with just the html on munroestudios.com/test.html. This is a iframe code received from another company to link to another site.

I'm not sure what they did but the company supplying the html code fixed something on their end. Works now.

How to create a repository(not just custom) using your hard drive

I don't know if many people know about this, so I am giving this a shot. There are three major articles on wiki.archlinux.org: Custom local repository,
Using a CD-ROM as a repository, and Offline Installation of Packages. These are available online through the WIKIs at archlinux.org.
I was first confused because when I was reading "Offline installation of packages", I didn't know what these ".db.tar.gz" files where. I came mainly from a Debian / Ubuntu
background (I actually tried many distros before this), so getting used to the way the repository works and no graphical install manager for it. However, I enjoyed a challenge and
I found out that these are database packages that contain descriptions and locations on where these files are located. The ones on the ftp server are already compiled. I don't know if,
however they are compiled with the most recent versions.
With all that said, I thought you had to have it all in one directory in order for this to work, but as it turns out, location is not really an issue. I decided to have a directory reside on the root.
I chose root because it's only for the install of my own packages. I could have done it as a seperate user account, such as "repos" in PCLinuxOS (another distro I tried). I didn't want to have a seperate account for this. Therefore, I created "/root/repository". Within this directory I created directories for all repository archives. I basically did a "cd /mnt/dvd" and migrated to the particular repository directories. I would copy all the "pkg.tar.gz" files into their respective directories with "cp * ~/repository/<name-of-dir>". For intance, I started with the "core" directory, because there was some things I didn't install in the core directory during installation and if the packages needed it, it was there. This follows for the rest of the directories, such as "community", "testing", and "unstable", etc.You can go to the ftp mirrors to find out what directories are available. The main point is that your files should be in the format ".pkg.tar.gz". These are package files that get converted into a sort of database format that as I mentioned, informs the system the description and where the files are located, and so on.
The command to perform this, is "tar -xvf /root/repository/core/core.db.tar.gz *.pkg.tar.gz". You can replace core with whatever repository you are adding. So, for example, "extra.db.tar.gz" would be in the "extra" directory. This information is located in the "Offline installation of packages". The command to create this database is called, "repo-add".
The format for this command is "repo-add /path/to/dir.db.tar.gz *.pkg.tar.gz". So, if it's the core packages you would "cd ~/repository/core" and "repo-add core.db.tar.gz *.pkg.tar.gz".
Then, you need to edit the "/etc/pacman.conf" configuration file for pacman. I basically would comment all out except for the repositories I need. So, for example "[core]" and "/etc/pacman.d/core" would tell where normally the servers are located for these files. This information is located int the "Custom local repository" article.using the "repo-add" command.
Furthermore, I edited each server file located in "/etc/pacman.d/<repository>" where repository is core, extra, etc. I would perform, "nano /etc/pacman.d/core" for example and comment out all servers. I then add a "local repository" by typing in "file:///root/repository/core", saved it, and then did a "pacman -Sy" to update the repository database. Now, I can do "pacman -S <package-name>" where package-name is whatever I wanted to install. Voila! Please let me know of any suggestions, questions, insights, or comments. I hope I'm not missing anything in this article. I do remember using "rm -rf * in the "/var/lib/pacman/<repository>"directories and using "tar xvf <repository>.db.tar.gz". I don't if that something to do with it, though. Be careful with the "rm -rf *" command, because you can erase your hard drive if you are not careful, for those who aren't informed.
P.S. Please note all these are done with the root user.

pressh wrote:
gradgrind wrote:
smitty wrote:pressh, I understand and appreciate your point of view... well taken! Are you implying that I should have written in steps, such as 1, 2, and 3? Also, should I have got ridden of the redundant information if it is contained in the Wiki article and / or taken out the commands on how to apply them and left only with the explanation? Is this what you imply? Sorry if I seem redundant with these questions, but I'm curious so I can improve for the future. I am new to this and open to any suggestion and comments.
Maybe you could either edit the existing wiki pages where they were not clear to you, or else add a new wiki page, or both. Certainly give the whole a clearer (visual) structure, and (if they don't already exist) add links between the connected wiki pages.
Yes that is partly what I mean. Further you could get rid of the information that is not really needed to follow the guide (for example what the command 'repo-add' does. People could if they are interested look it up in the script itself, or you could add it here and link to it).
And yes a bit of structure would be nice. You don't have to nessesarily call it 1,2,3, as long as it has some kind of structure in it (the visual point is very important here). You could take a look at existing wiki pages on the web and see how most of them (not all of them are good of course) are structured.
That's a good point, too. How do I found out what articles are more effective? I am doing research on this particular matter at the moment and came across articles that have tips on technical writing. Could this help in the long run? Or, is it better to get feedback from other users and improve that way? In other words, do first, and ask later, as one user point out?

SharePoint 2010 list view web part not showing conditional formatting

when I create conditional formatting in custom list is working fine & when it call through web part page (Data view web part) conditional formatting not showing. data is showing without conditional formatting.
Dinuka M.

When you use conditional formatting on some page it is writing inline CSS codes inside that page. thats why when you create a new page and add the same web part to that page, you must edit that page to apply conditional formatting to that
web part.
Best Regards, Mustafa Yılmaz MCITP, MCPD | www.mustafa-yilmaz.org | www.sharepointciyiz.biz
When you say edit the page, do you mean edit it in SharePoint Designer, or in SharePoint itself. And is it a case of just editing, then saving the page and it will apply the conditional formatting, or is there a specific property you need to edit, and if so,
what is it?

Groups created with dscl not showing in WGM?

When creating a group "testGroup1" via dscl as follows ...
      Dscl -udiradmin /LDAPv3/mac-mini.local -create /Groups/testGroup1
The group shows up when running ...
      Dscl -udiradmin /LDAPv3/mac-mini.local -list /Groups
However, in Workgroup Manager the new created group"testGroup1" does not exist.
Is there a way to determine where exactly the newly created Group is located?
I did notice that the Workgroup Manager directory location is /LDAPv3/127.0.0.1.
Does the 127.0.0.1 have something to do with it?
Also, if I try to run the following ...
      Dscl -udiradmin /LDAPv3/127.0.0.1 -list /Groups
I get an error saying "Data source(/LDAPv3/127.0.0.1) is not valid.
I know it's there because it shows when I run a different tool called Ldapmanager.
But for some reason it's not showing in Workgroup Manager.
I was wondering if there is some attribute (or something like that) that must be set when creating the group before it will show in Workgroup Manager.
Or maybe the server needs to be rebooted before they show? I wouldn't think that would be necessary, unless the users are being loaded when Workgroup Manager loads.
Any help would be greatly appreciated.
Thanks,
Zeek

Hi David
There is a configuration that needs to setup to turn on outbound delivery document number update in MD04.
This means if there is an STO in MD04 which is converted into outbound delivery, MD04 should now show outbound delivery number instead of an STO
Follow this path and set up the document type of your outbound delivery in it
Logistics execution -> Shipping -> Basic SHipping Functions -> Availability Check and transfer of requirements -> transfer of requirements -> Determination of Requirement Types using transaction

Web App not showing in Portal Preview

We are running two web apps (Wordpress sites zebraWP and zms) under our subscription at Azure. They both show under the old management portal but only one shows in the new portal. Reading through a previous question, I went to resources.azure.com and
the site (zebraWP) that is not showing shows Error: 'Resource not found'
The website otherwise appears to function normally.
I am not sure how to correct this. I have a nice example of what should be there from the other site but am reluctant to try to edit anything myself.

You can work around by using resources.azure.com to create the site with the same name (zebraWP). Make sure you put the matching location and serverFarm with the origin site. For instance, location "West US" and serverFarmName
"DefaultServcerFarm". See if it helps.
Suwatch

Created By and Created Date fields not showing up on Custom List form webpart

Hi,
I have added Custom Listform WebPart on "DispForm.aspx" of custom list. I need to display, out of box fields "Author" [Created By] and "Created" [Creation Date] on this custom list form webpart, I have added them on the webpart, following is the code behind of aspx page:
<td width ="400px" valign= "top" class="ms-formbody">
<xsl: value-of select = "@Author" disable-output-escaping = "yes"/>
</td>
However these fields are not showing/populating data on the form ?? Any inputs ???
Regards

Hi,
I think that when you insert a custom list form web part you select “Item” content type, so custom list form is designed to display only the fields that are appropriate for that content type “Item”, but the item content type doesn’t contain the created and created by column, when you add the two columns, it will not find the field value. By default, the two columns will display at the foot of the list form using SharePoint:CreatedModifiedInfo.
Hope it can help you.
Xue-Mei Chang

WedDav Repository not showing up in Root Folder

Hello All,
I have created the WebDav respository in NW7.0 SPS14 portal as described in http://help.sap.com/saphelp_nw04s/helpdata/en/e3/923230b24e11d5993800508b6b8b11/content.htm
Created an HTTP System and Created the Webdav Repository and finally restarted the system. But I'm unable to see the folder in the Root folder.
The WebDav system is IIS server. I have created the KM systems and have assigned the usermapping for the KM system. Hide in Root folder is not checked at all.
Repository manager in Component Monitor shows green.
Please let me know as why I'm not able to see the folder in KM content --> Root folder.
Thanks,
Praveen

Hi Robert,
We are experiencing exactly the same issue. When providing a subfolder the response is
The item you are attempting to access is not available. Check that the name or link is correct. You might also check whether the associated repository is currently accessible.
Any further pointers on how to find the root cause for the repository not being available?
Many thanks,
Jeroen

Newly created Web repository not showing up in explorer

Similar Messages

Maybe you are looking for