Newly INstalled FCP Studio Universal - No Firewire Recognition!

I use a Canopus ADVC-110 via a Firewire to digitize from analog sources and feed my timeline to an external monitor.
Since I installed FCP Universal, I cannot get the software to acknowledge that there is a firewire device connected to the computer. I trashed prefs and still - no recognized firewire device.
Any help out there???

Check out this link:
http://docs.info.apple.com/article.html?artnum=301852
whether it works in your situation or not, I don't know, but I don't think it can hurt.
Good luck.

Similar Messages

  • Problem Installing FCP Studio 2 on SL 10.6.2

    Hello All
    when trying to install an original FCP Studio 2,
    the installation gets stuck towards the end. (around 95% of the first general installation disk).
    this has happened 3 times.
    After rebooting, the programs seems to be in the application folder.
    but they are missing many files and meterial.
    ( because i did'nt get a chanse to go through the other Content disks... )
    did anyone had a problem installing FCP Studio 2 on SL ?

    Here's a way to work around the possiblitily of a damaged disk or an intermittent dvd reader.
    Insert your FCS install disk, make a disk image of it (using Disk Utility) and leave the image on the Desktop. Eject the FCS install disk, and create a disk image for each of the FCS disks.
    Now, with all the images on the desktop, double click on the install disk image and start the installation process. It should take less than an hour to install EVERYTHING.
    Once the installation is complete, copy the disk images to a safe place. You'll have them available if you ever need to reinstall FCS.
    good luck,
    x

  • Do I need to uninstall FCP before installing FCP Studio 2?

    Hi all, I have Final Cut Pro Studio, FCP 5.1.4, Academic version, and recently got Final Cut Studio 2, and just wanted to check to see if I needed to completely reinstall FCP, or would just installing FCP Studio 2, do the trick?
    Thanks

    I'm still trying to figure out my plan of attack for installing FCS2 when it arrives today.
    Randy, do you at least delete the apps before installation, or do you just put the DVDs in and go?
    Most folks around here preach the complete reinstall of the OS and then installing FCS2...you don't agree?
    Just trying to get all opinions here...you are cleared of any blame when/if something goes wrong!

  • Install FCP studio to external drive

    I want to install FCP studio to my macbook pro and install all supporting media to an external drive so i don't waste space. has anybody done that.
    thanks
    macbook pro   Mac OS X (10.4.9)  

    As Jerry notes, templates can be installed on a non-system disk.
    Pay close attention during the install process when you are given Options. A number of people have clicked through those moments without paying much attention and placed all there support files on the system disk - much to their dismay.
    good luck.
    x

  • Installing FCP Studio Uninstall Express HD 3.5?

    I just bought FCP studio(Academic Version), but before I install it should I uninstall Express(version above.) ? Live Type ? Soundtrack? I was planning on using Express on another machine so would like to have these programs on that since I paid for both.
    MacProG5   Mac OS X (10.4.8)  

    You do not need FCE HD 3.5 before you install FCS. The installation for FCS will be shorter because LifeType (including livetime fonts (about 6GB) don't need to install. You can use both versions on one machine. However when you install FCE HD on another machine you may not use the program (FCE HD) the same time. Look in the legal information.

  • Re-Installing FCP Studio, Uninstall First?

    Can anyone give me some advice? I have been having problems first with Compressor, and now I can't even open FCP. A friend suggested I reinstall everything.
    My question is: do I have to uninstall everything first? If so, does that involve trashing just "Final Cut Pro" - or also "Compressor," "DVD Studio Pro," etc., since they all come together on the FCP Studio discs.

    OK. Will download and try that now.
    Here are the details: first Compressor just stopped working. When I tried to export a FCP sequence using Compressor, I would get an error message that said the file name was already in use. And then the batch would fail. It was frustrating because it came out of nowhere. But FCP was still working.
    Then a seemingly separate issue: yesterday afternoon, I installed a printer driver using the original OS X disc. After that, FCP stopped opening. When I try to open the application, I can see the icon blink for a moment on the dock, but it closes again jsut as quickly. I've tried opening it from "Applications", from my project - nothing works.
    So. Not sure how to proceed. I will try FCP rescue right now.
    Thanks!
    R

  • Trouble installing FCP studio 2

    During installation of FCP studio 2, I am asked to insert the Audio content disk 1, then I am asked to insert the Final Cut Studio disk again. After a couple of minutes the installation stops and tells me that there are errors and that I should reinstall. I have tried after a clean reinstall of Tiger. Does anybody have some advice?
    Boaz

    Try the clean install again.
    If you have problems in the same place twice, you may have a defective install disk. A call to Apple is in order. There should be free installation support for 90 days.
    Good luck.
    x

  • Need to install fcp studio 2 on my new second generation i7 iMac

    I used to own mac book pro 17" and had fcp studio 2 on it. I decided to purchase imac 27" i7 second generation and tried to install fcp studio2 on it but I get the following error "you van't open the application FinalCutStudio.mpkg because PowerPC applications are no longer supported"
    I need help to get around this as i didn't like Final Cut Studio X

    There are some possible solutions in this thread.
    https://discussions.apple.com/message/15540498#15540498
    Read all the way through to the end as there are several  strategies.
    Message was edited by: Ian R. Brown

  • Newly installed logic studio won't launch on my macbook pro

    I just installed Logic Studio on my macbook pro (core 2) and it crashes before it can launch all the way. could this be a conflict with my protools LE software, or Reason? any ideas? thanks.

    Have you downloaded the .01 update for LP8? That should improve things a fair bit. Don't know about the MBox2; might want to their website on that one.
    Cheers

  • Help... Installing FCP studio on a third system...legally

    My MacBook broke and I want to install FCP7 on my new Macbook but want to keep it on my iMac.
    Is it impossible to install onto a third device? I have all the disks.
    Much love

    It's discontinued software that Apple clearly doesn't care much about...  There may be some problems getting it to install with the newer OS, so read the archives about that.
    But go ahead and install Studio on your new MacBook; there is no magical installation counter, it's just that you can't have it running on two networked Macs.

  • Can I re-install FCP Studio (FCP7) without Install CDs?

    My MacBook Pro (Spring 2011) hard drive died recently. The Apple Store replaced the 320GB hard drive with a 500GB hard drive. However, I lost all my applications, programs, and documents stored on my internal drive. Thank God I saved most of my content on an external G-Drive.
    Is it possible to reinstall Final Cut Studio HD (Final Cut Pro 7, etc.) without the install CDs? I have the product key and support ID.

    How can you install it without having the installers? What would you install from? 
    It's like trying to bake bread without having flour.  Or wheat! 
    It doesn't just appear out of nowhere.

  • TS2594 how to install fcp studio in mac pro book i7

    hi
    iam buy new final cut studio 2 an mac pro book
    how to i instaled final cut studio 2 in my mac pro book core i7 2.4Ghz
    tel me plz wats the solution.....

    Find an old copy somewhere that a dealer still has in stock. But why?

  • Cannot install fcp studio contents

    Hi there, has anyone run into the problem of not being able to install the content DVDs of FCP5? If I select the softwares, fcp, dvdsp, motion, & soundtrack then they installed fine but cannot install their contents DVDs. Pleaes helps.
    thankx
    JP

    What happens when you try?
    Shane

  • Permissions issues and installing FCP Studio - admin has no privileges

    Hello
    Compressor 2.01 was crashing to I pulled out the universal binary updater discs and decided to finally upgrade. When I run the installer, I get the following error when I input my serial number:
    "Licensing Error: The license file will not be written to disk because the user does not have enough privileges."
    I am an Admin user on the Mac.
    I recently (this morning) ran Disk Utility and fixed permissions. I also booted into single user mode and ran FSCK. Those things are supposed to FIX permissions issues, not cause them, right?
    I also ran permissions fix a few minutes ago - after I got this message. The error message still pops up.
    What can I do?
    Thanks,
    -----------------S

    Thanks for the overwhelming response.

  • Re-install FCP Studio issues.

    I am trying to reinstall FCS on an iMac that I just reformatted and took to Lion.  I installed FCP7.0 then tried 7.03 update.  Doesn't install.  Do I need 7.01 or 7.02 first?

    I assume you are using Software Update?
    One of the main reasons for FCS not updating is because one or more of the apps have been moved from the Applications folder or had their name altered.
    You don't need earlier updates, however, be aware that the update will probably not be called FCS.
    You should also allow Software Update to update every other Mac item it can.

Maybe you are looking for

  • Connected usb driver is not detected in window 8.1

    hey .....  HP 250 G3 notebook connected usb driver is not detected in window 8.1 after update BIOS software ....my current BIOS software version  F.22 .... so plsss...fix this problem......

  • I can't save changes to my PDF document?

    I downloaded a PDF document from Google Chrome onto my desktop. (It's a job application). However, every time I make changes to it, click save, and then open it up again using Preview, none of my changes have saved. Help?

  • Sales order item repricing

    Hi, For a sales order, I need to check pricing date of each item. If order creation date(VBAK-AUDAT) <= Date in condition table <= Item pricing date( VBKD-PRSDT) , then I need to reprice that item with pricing type 'C'. Please let me know if there is

  • Can't upgrade my apps

    I can't get the upgrades to my existing apps. I am logged in my account and I have already tried to log off and on again, but when I try to upgrade them, a window pops out asking to log in the app store, but with another email that I can't change, so

  • Get Process Initiator email id in a BPEL process to send notificaions

    Hi I have a workflow where there 3 different roles and a chain of approvals among them. The final approval leads to the invocation of a BPEL process(Using Service Task) where, depending on a particular invocation in the BPEL process, I need to send e