Newly installed leopard-HOW TO GET LINE IN OPTION IN SOUND PREFS?
Hi,
Have just installed leopard and garageband 09 onto my PwrBk15" 1.33ghz and
usually, on panther and tiger, when i wanted to put a minidisc thru to record into garageband i had to go to system prefs>sound
and change the audio to line in input option and now there is no option there - just 'built in mic'
and in gb prefs there is 'built in' option and 'system settings' which doesn't really do anything. Connection of the minijack and playing the minidisc in2 it is not getting into the computer at all -
not even in the sound prefs rec volume bars...just the sound coming thru the built in mic.
I opened an old GB and it's the same so i guess it's a leopard thing not a garageband thing essentially.
Any offers for solutions or info? is this usual for leopard?
Thanks
Found answer trawling thru threads!
For anyone interested -
go to Applications>Utilities>Audio Midi Set up>change the input source there to line in - if the option drop down table has it!
In GB prefs change input to 'system settings'.
Similar Messages
-
No 'Line input' option in sound prefs after upgrading from Tiger to Leopard
I have connected guitars and mics using Garageband 3 without a problem, until upgrading from Tiger to Leopard 10.5.8.
I'm not getting sound from the guitar apart from feedback when I plug it in to the audio line-in port on my iMac G5.
I have read many of the questions and comments in the relevant forums all pointing to selecting the line-in option of the input tab in the sound preferences window.
I only have the 'internal mic' appearing in that window now.
I've checked that the cables are working correctly on a guitar amp and are fine.
So not sure why I don't get the 'Line-in' option anymore.
Are there any patches/updates to cure this problem, or would updating to Garageband 9 cure the problem?
Thanks,
MickYes, checked the 'Audio MIDI Setup' utility and can select Line-in from there.
All working fine now!
Thanks very much for your help.
Mick -
How to get line in Line chart to go to edge / border of graph
Post Author: brutschm
CA Forum: Charts and Graphs
How to get line in Line chart to go to edge / border of graph?
I've seen this before but can't remember how to do it now. I'm using Crystal Reports XI
Thanks,
BrandonPost Author: V361
CA Forum: Charts and Graphs
Not sure if this is what you are looking for.
Group X Axis setings, uncheck the Value axis crosses Between Groups. -
How to get lines in between two fields in smartform
Dear Freinds,
I have developed one smart form however iam not getting output correct could you please help me out, the problem iam getting is iam not able to get the following things
in The Main Window
i have one header , one Main Area and one Footer Area
in the header i have created one %ROW1 and named as Row and again under the ROW i have
created a % Cell ...........again i want to create for the same Row iam not able to creeate another
Cell.........please let me know how i can have 5 or 6 cells for the same Row .
as i want the output as
UNit No. : 103 Quantity Req : 200 Date of Issue : 10/01/2008
Destination : Delhi Amount : 300 Rate/Per unit : 7
and secondly i have to have lines between the rows .... so please do let how to get lines in between rows as well..
i have tried allot but not able to get.
regds
madhuriHi Marcin Pciak ,
Thank you very much for giving me the solution, one more point i require in this regard
i have requirement as below
IDNo Invoice Amount
Despatch Date Despath Time.
Now i want i created Two Cell s (Cell A & Cell B) could you let me know how i can get IDNO and
Invoice Amount adjusacent to each other as above but right now iam getting in my smarform
IDNO
Invoice amount
but i want is IDNO-- Invoice Amount--
please help me this point
thanks once again for giving me answer.
regards
madhuri -
How to get line item net price and net value?
I have using "BAPI_SALESORDER_SIMULATE" to SIMULATE to create SO,
the return table
ORDER_ITEMS_OUT-NET_VALUE is not equals than created by VA01 .
how to get line item net price and net value?Hi,
Can u elaborate ur query ?
By this FM you cannot create a SO . Use FM --> BAPI_SALESORDER_CREATEFROMDAT2
Regards,
MAdhukar Shetty -
When trying to update Acrobat XI I get a 1328 error each time. I have uninstalled XI and reinstalled it from disk. When trying to update the newly installed XI I still get the 1328 error. I have searched my C: drive for the file C:\config\Msi\PTA082.tmp but with no sucess. Any suggestions?
Hi Berriedale,
Please try the below steps and check.
Turn off any antivirus or software security program.
Download the update patch 11.0.10 manually from the below link and run it.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5859
Regards,
Anand -
How to get the download option in Firefox 3.6.13. Earlier it was showing in the Navigation Bar just beside where we see the URL.
You can find the connection settings in Tools > Options > Advanced : Network : Connection
See "Firefox connection settings":
*[[Firefox cannot load websites but other programs can]] -
How to get ABAP mapping option in Interface Mapping
Hi
experts
How to get ABAP mapping option in Interface Mapping . i need to do abap mapping . i didnt find the option
plz help meHi,
If u2018ABAP-classu2019 and u2018XSL(ABAP ENGINE)u2019 does not appear under the u2018Mapping Program Typeu2019 in Interface Mapping, one has to make an additional entry in the Exchange Profile.
Only a user with the J2EE security role (administrator) can make the following settings in the Exchange Profile.
It is achieved in the following manner:
1) Open http://<host>:<port>/exchangeProfile/index.html
2)Choose IntegrationBuilder ->IntegrationBuilder.Repository -> com.sap.aii.repository.mapping.additionaltypes
Add: R3_ABAP|Abap-class;R3_XSLT|XSL (ABAP Engine)
To check whether the data has been successfully read from the exchange profile:
1- Open http://<host>:<port>/rep/support/admin/index.html
2- Choose Administration of Properties -> All Properties
3- If the value associated to parameter com.sap.aii.repository.mapping.additionaltypes is not visible, press REFRESH button
After doing above check in IR, if still don't find the option for ABAP mapping then refresh the cache.
Award points if useful. -
How to get the Swatch Options Color Type?
How to get the Swatch Options Color Type name that is "Process Color" or "Spot Color" which shown in the Color Type via scripting..
Thanks...Could you please provide any example for how to get the color type name that is process or spot. Thanks for looking into this.
Advance thanks,
Maria Prabudass -
HT1937 how to get back 3g option from lte on iphone 5s
how to get back 3g option from lte on iphone 5s
You don't. The presence of that option is at the discretion of your carrier.
-
Im connectioning my macbook to my hdmi port in tv. I am getting no sound through the tv only the macbook speakers. anyone know how to get my tv to read sound?
The Mini DisplayPort to HDMI doesn't carry audio unless you have the Mid 2010 model 7,1 and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI. But check your TV manual to see if it has audio plugs that work with one of the HDMI ports.
If you have the Late 2008 model 5,1 Aluminum Unibody or Late 2009 model 6,1 White Unibody with the Mini DisplayPort rather than the Mini-DVI there is an adapter that uses the Mini DisplayPort and a USB port to combine video and audio to HDMI. It's only 2 channel stereo not 5.1 Dolby Surround.
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5969&seq=1&format=2
The Mini-DVI port doen't carry audio at all. The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort. The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports.
To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion or 10.8 Mountain Lion). When System Profiler comes up check the Model Identifier and post it back here. -
When recording voiceovers, I click the stop recording button at the end, but I can't figure out how to get rid of the "click" sound before I send off the recording!
njordan wrote:
I can't figure out how to get rid of the "click" sound before I send off the recording!
drag the BottomRight edge of the region to the left, past the unwanted sound -
How to get the "Eps option" details for illustrator cs3.
Dear all,
Could you please advice me how to get the Eps option(Preview, Embeded Fonts(for other application), Include Document Thumbnails etc.) details for illustrator saved files through scripting. I have attached the screen shot("sample.bmp") for yours review. Please explain in detail.
Thanks in advance.Thanks for your response. As per your advice i tried to open the illustrator cs3 file in text editor. I got only the Thumbnail and Version details. But I am unable to get the remaining below details.
(Preview=>Format : TIFF (8-bit Color), TIFF (Black & White), Transparency=>Overprints : Preserve, Discard, Fonts=>Embed Fonts, Options=>Include Cmyk PostScript in RGB Files, Compatible Gradient and Gradient Mesh Printing, Adobe Postscript=>LanguageLevel2, LanguageLevel3) .
Kindly advice me how to get the above details.
Thanks for looking into this. -
Erase and install Leopard - how do I get my iWeb pages back?
Because of an issue with Photoshop CS3 I had to "erase and install" Leopard. I did backup all my files except the iWeb site... the site is still online but I can not see the pages anymore in iWeb. Does anyone know how to fix this?
iWeb does not have an "import" function whereby your published HTML could be used to rebuild your site.
The best you could do is manually retrieve your site's "content" (images, text, mp3s, etc.) from its published location. If you published to .Mac, your site's content will be on your iDisk -- accessed via the Finder > Go > iDisk > My iDisk > Web > Sites > ...
If you published elsewhere, your site's content may be accessible (downloadable) via your FTP program.
You can also display your site in a web browser and drag & drop images from there to your Desktop. Also in Safari, for example, you can do View > View Source to see your text and perhaps copy & paste it. -
How to get Line Number in Purchase Order
Hi Experts
I want to get Line Number of Matrix of Purchase Order. How I get it ?
I want to compare Matrix Line Number with Line Number of POR1 in DB.
Please Help me.
Hepil DoshiHi Hepil,
Linenum in Matrix "38" is Columns.Item("110").Value
SBO application doesnot show it, but you can get the linenum from that column.
You can test by getting the column title. omatrix.columns.item("110").Title
Hope it helps.
Regards
Edy
Maybe you are looking for
-
Pls fix this in my title And why dont you support mirroring in other devices than ipad 2 And in ios 5 it keeps crashing
-
I have a credit of $5.90 that already existed before being added to family sharing. The only pay option is the family credit card, and not my existing credit. I want to finish up my credit first. How can I do this? I've tried on my iPad, my iPhone, a
-
How do I turn off Facebook text messages?
Hello, I really don't know where to ask this question, so I hope I'm posting it in the right location. I transitioned from the iPhone 3GS to the new iPhone 4S. On my older iPhone, I NEVER received text messages from Facebook (which is a good thing).
-
Radio Buttons Not Appearing in Quiz
I created a quiz in Captivate 5.5 then upgraded to Captivate 6. When I run the quiz locally, the radio buttons appear next to the possible answers and everything works fine. When I run the quiz in our LMS, the radio buttons do not appear. Anyone e
-
Mapping SAP R3 role to EP role for WD ABAP Application
Hi, I have a WD ABAP application which uses POWL component. I have assigned this application to a role in SAP R3 system. Now, I have created an iview in portal for this WD ABAP application. I want to map this SAP R/3 role to Portal Role so that only