Newly installed OS X will not start up on new hard drive

Hello helpers,
I have many problems with my Power book g4 titanium. Most critical: I have just replaced my Hard drive with a new 120 gb. I also, purchased a new dvd OS X 10.4 full retail version. I installed it onto the new hard drive. It loaded properly and said to restart. Well thats it. It will not restart. It acts like it is going to restart. But, all I get is the apple with a little wheel timer thing. I waited for several hours and that is all it does. Please help.
Many grateful thanks,
Rembrandt0328

I suggest you re-prep your new drive then reinstall OS X.
Extended Hard Drive Preparation
1. Boot from your OS X Installer Disk. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button and select the Apple Partition Map scheme, then click on the OK button. Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
When formatting has completed and the new volume has re-mounted on the Desktop quit DU and return to the installer. Proceed to install OS X.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Similar Messages

Owerbook g4 not starting up after new hard drive and software update

Hello,
I know that there are several postings that are similliar to this query, but none have answered my question.
I have a Powerbook g4 15 inch 1.67/1.5 Ghz with 1 gig of Ram.
A few months ago I suddenly found myself unable to log into my computer after trying to render an effect on Final Cut.  After going through Disk Utilities and repairing the Hard drive, the computer seemed to work for a day or so, but then ran into the same problem.  This time Disk Utilities found
Keys out of order
rebuilding catalog B-tree
I feared the worst and replaced my hard drive with a Seagate PATA 2.5" Internal Notebook Drive.  Installed OS 10.4 and everything seemed dandy until I tried to re-install Final Cut, which would not allow me to install Live Type.  I remembered that there were some updates for livetype and OS X, so I tried updating the OS X dual update, which got about 90% of the way and then the Kernal Panic display told me to restart the computer.  Okay, this time the computer would hang in the gray apple screen for awhile and then the screen would turn blue.  Ran disk utilities off of the start up disk, and ran into the same B-tree problems (I'm guessing the directory is still damaged somehow).
So I erased and installed OS X again, and after that tried updating OS X, and the same thing happened.  Although this time disk utilities says the hard drive is OK.  Tried resetting PMU, fsck, PRAM, and still the blue screen after initial gray apple screen. Tried safe-mode, but it went to a single user "welcome to Darwin" screen and I didn't know what to do after that.
So, should I try to erase and install again, this time running a repair permission before updating software?  ANY other ideas?  It seems like a directory issue, but I don't know what else to do.

supersonicavengers:
So, should I try to erase and install again, this time running a repair permission before updating software?
If you do not have anything on the HDD you need to preserve, that is probably a good idea. Here's how I would proceed:
Formatting, Partitioning Erasing a Hard Disk Drive
Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
• With computer shut down insert install disk in optical drive.
• Hit Power button and immediately after chime hold down the "C" key.
• Select language
• Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel. (You are about to create a single partition volume.)
• Click on Options button
• Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)
• Click OK
• Select number of partition in pull-down menu above Volume diagram.
(Note 1: One partition is normally preferable for an internal HDD.)
• Type in name in Name field (usually Macintosh HD)
• Select Volume Format as Mac OS Extended (Journaled)
• Click Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Quit Disk Utility.
Installation Process
While still booted from the install disk
• Open Installer and begin installation.
• Select installation option
• Choose to Customize and deselect Foreign Language Translations and Additional Printer drivers.
Optional: Check box to install X11 (Tiger and later) BSD Subsystems (Panther & earlier).
• Proceed with installation.
• After installation computer will restart for setup.
• After setup, reboot computer.
• Go to Applications > Utilities > Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select First Aid in main panel.
• Click Repair Disk Permissions.
• Connect to Internet.
• Download and install Mac OS X 10.4.11 Combo update (PPC) (Tiger)
Computer will restart.
• Repair Disk Permissions as previously.
• Go to Apple Menu > Software Update.
• Install all updates.
Computer may restart after updates.
• Go to Applications > Utilities > Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select First Aid in main panel.
• Click Repair Disk Permissions.
Please do post back with questions or comments.
cornelius

Will recovery disks work on new hard drive

I just installed new hard drive on hp laptop with Windows 7 64 bit. I used the iso file installation disc. Now I would like to use the recovery disks I made 2.5 years ago to load the original software and drivers as when the pc was new. When I put Disc 1 in the drive the pc does nothing. I've been reading online that you have to change the order of the drives in the BIOS so the pc will boot from the dvd drive.
Then further research online, I read that recovery disks will not work on a new hard drive, and on a smaller drive than was previously installed.
I did do a full system backup from old hard drive, so I have those 3 discs. I have not tried that. Basically all I use pc for is web browsing,email and an occassional movie.
I guess I just want it to seem like a new pc with all the original software and drivers.
I downloaded hp support assistant, however it states that new updates are not needed. That can't be right.
I went to hp download page, but not sure which drivers/software to download.
This is wearing me out. Please help if you have any suggestions/advice. Thank you!

Paul, thank you for answering. I have a HP Pavilion DV7-4270us.
From my research, I don't believe the operating system is on the recovery disks. I am very hesitant to work with the recovery disks again. Anyway my new hard drive is 500 GB which is smaller than the old 640 GB that was previously installed from the factory. So the recovery disks may not work on a smaller drive.
At this point, I would like to get back HP Media Smart and Synaptics click pad working. I have downloaded the driver for the clickpad, but it does not operate like it used to. No settings to choose from etc. I downloaded the Media Smart Software package and driver, but the software package is not there. I was just reading online, and found a link for the Simple Pass Identity Protection fingerprint reader. I downloaded it, and seems so far to work. Also, on the keyboard the light on the keyboard button for (volume on and off) remains lit all the time. It used to light up only when the volume was off.
Man, you sure can run into all kinds of problems when you install a new hard drive. Any suggestions will be greatly appreciated!! Thanks, Ken.

When installed, LR CC will not start.

I just upgraded LR5.7 to LR CC, but when installed, LR CC will not start. No error messages, no hour glass thinking. Nothing. It's just dead. I'm using Windows7. Any one else had the same problem?

That file is part of the Microsoft Visual Studio distributable package that is available from this link:
Download Visual C++ Redistributable for Visual Studio 2012 Update 4 from Official Microsoft Download Center

ITunes is installed but it will not start

I just updated iTunes and the progam shows as being installed but iTunes will not start.

I have had this problem - started two days ago. (Win 7 Enterprise 64-bit OS.) I have not added anything new recently that could cause a conflict (upgrades, new software, etc). Suddenly it didn't work - will not open. In Windows Task Manager I can see that it starts and then stops without opening. I've plugged in my IPhone, IPad and IPod and nothing will connect. Some forum threads suggest removing/reinstalling QuickTime and some have found that to work. Didn't for me. It will open if "Run as Administrator" is used, but that - according to threads - suggests third-party add ons as a problem. Not the case with mine. I completely removed all of the ITunes software (Bonjour, Mobile Support, etc.) and reinstalled. Nothing changed. I am so frustrated with Apple on this - I found nothing in the support discussions to help. Quite frankly, I do not understand why Apple, with tech equipment that is so well designed and elegant, still puts out such a lousy piece of software that you are held hostage to use. I have hit a wall - I hope you get a response and help! I've run out of ideas!

Illustrator Cs5 will not open. Recently upgraded hard Drive and upgraded to Maverick OS 10.9.3. Where should I start troubleshooting?

Illustrator Cs5 will not open. Recently upgraded hard drive and upgraded to Maverick OS 10.9.3. Where should I start troubleshooting?

gj,
Unless it has worked since the upgrading, I believe you should uninstall, run the Cleaner Tool, and reinstall.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

I upgraded to Maverick and now Time Machine will not connect to the external hard drive to back up files. The external hard drive is a Western Digital "My Book Live" 2 TB. How do I solve problem?

I upgraded to Maverick and now Time Machine will not connect to the external hard drive to back up files. The external hard drive is a Western Digital "My Book Live" 2 TB. How do I solve problem?

I also had problem accessing my WD MyBookLive after upgrading to Maverick.
To resolve the problem, I used Connect To Server (Cmd K) to specify the IP address.
Then I enter a user id and password I created in the MyBookLive.
You can also verify that you have admin access to the MyBookLive using Safari or Chrome.
Just enter the MyBookLive IP address as the URL.

Elements 5.0 will not download photos onto our hard drive into folders, only individually. *

Elements 5.0 will not download photos onto our hard drive into folders, only individually. We have recently changed to Win 7.

Sorry – I was having trouble using the forum and accidentally doubled up. Thanks for your suggestion. We will give it a go.

External startup disks will not start with my new iMac

My external devices which are startup disks will not start when connected to my iMac, although it appears in the bootable drive selections after the chime sound, using the option (Alt) key. I get the bootable drive selections and when selecting it all I get is a gray screen with the apple logo and that is it. No matter how long I wait the start up does not happen. I am sure that the external device is not damaged because there is no problem to use it as a startup device when connected to my MacBook Pro.
Otherwise the devices work as they should. If I connect them to my iMac then they will appear on the desktop, etc. The only thing which does not work is that they cannot be used as startup disks, even though they work fine as startup disks if connected to my MacBook Pro.

Based on your description it is very hard to tell what is going on.
You appear to have an i7 iMac. That model was delivered with Snow Leopard (10.6.x).
My guess is that your external disks may have a version of OS X that predates the version supplied with your new iMac. You cannot run an earlier version of OS X than what was delivered with your Mac.

Itunes will not store in an external hard drive

I use an external hard drive to store my music.
The last few CDs we have put onto itunes do not appear in the external hard drive, why?

Hello compsec1951,
It sounds like the content may have been saved in the default iTunes folder location in the Music folder.
Use this article to determine how iTunes is setup and where it is saving the new content. While it may be accessing the library on the external drive, it may be saving new media to a different location.
Where are my iTunes files located?
http://support.apple.com/kb/ht1391
Mac OS X: Click the iTunes menu and choose Preferences.
Windows: Click the Edit menu and choose Preferences.
Click the Advanced pane. iTunes displays the location of your iTunes Media folder.
You can then:
Note where your media folder is, such as for backing up your media.
Use the Reset button to reset it's location to the default (which is the iTunes folder).
Click the Change button to select a folder for a new location. Once you change this location:
If you make a new or alternate iTunes library, the new location will be used by that library.
Existing files will not be moved unless you choose File > Library > Organize library and choose the option to "Consolidate files."
Regards,
Sterling

How do I install the operating system Windows 7 on a new hard drive?

Good morning ¿ how I can install windows 7 home premium on a new hard drive?, Disk damage has my laptop windows 7 home premium 32 bit and I have to buy a new hard drive, but not as I have already installed the new because I do not have installation CD because it is laptop, thanks. My laptop is a satellite L455-S5975 .
For I CAN NOT get the recovery disks, and I'm not in USA. There will be a way to get it via download?
My English is not very good, excuse me if I do not understand.

Satellite L455-S5975
I CAN NOT get the recovery disks, and I'm not in USA. There will be a way to get it via download?
There is no opportunity to download it, Richo. Your best bet is to have an acquaintance in the USA, Latin America, or Canada order the recovery discs and ship them to you.
-Jerry

App store not working properly a new hard drive in iMac

Hey guys,
My seagate hard drive crashed, so had to get a new hard drive in intel late 2009 iMac. When I go to app store, it is acting weird. Some of the programs it says I have installed are not installed on my computer. So I am unable to download them. Also I am unable to update garageband, imovie and iphoto. No clue what needs to be done. Hope spmepme has a answer.
Thanks Philip

Try resetting the App Store.
Reset Learned from Old Toad
and
- Sign out of the App Store (in the Store menu)
- Quit the App Store
- In Finder - Go>Go to folder... (or Apple-shift-G)
- Paste in the following "~/Library/Caches/ "
- It will take you to a folder. Delete com.apple.appstore
- Launch the App Store.

Installing operational system (MAC OS X) on a new hard drive

Hey Guys,
My Mac Pro came with 250GB of hard drive so I bought a new hard drive, installed it (1TB) and it works just fine but; how can I transform this disk so It can become my main hard drive?
- Do I have to install Mac os X on it? (how do I do that?)
- Is this even possible?
I just want to have more space on my hard drive when working on big projects (graphic design) cuz I only have like 30 GBs of space on my main one so the 1TB one works for me just as an external drive but inside of my Mac Pro.
Can someone give me a hand on this?
Thanks!

I would buy more drives.
Clone your current drive to the 1TB, yes.
SuperDuper $29 is your bet shot.
Keep the old drive as backup.
Use #3 as new backup/clone or for TimeMachine.
Migrate all your project files to drive #4, just change the application preferences to new location.
Shame you waited so long. New drives will also give you a bit better disk performance.

I can't re install from disc photoshop elements 12 disc on new hard drive. any suggestions? Thanks!

Trying to reinstall photoshop elements 12 on new hard drive with disc. For some reason it won't install. Any suggestion?

For some reason it won't install. Any suggestion?
Any clues you can offer us? Screenshot, error message, error codes.
Without more info we're all guessing.

Newly installed Elements 11 will not open without restarting the PC each time.

Using Windows 7 I uninstalled Elements8 and installed new Elements 11 but if I close down Elements 11 it will not reopen unless I restart the PC each time. Also I cannot uninstall E11 because I get message that "thumbdatabase.db3" is in use, so I cannot reinstall to see if that will solve the proble. Please help?

Working with your Operating System’s Tools
You simply need to find out which process is keeping those files open/ blocked. In fact it's quite likely that your PSE never quits correctly due to some issue on your system and that keeps those files in use...
Mylenium

Newly installed OS X will not start up on new hard drive

Similar Messages

Maybe you are looking for