Newly re-loaded Elements 10 wil no longer open RAW files

I bought Elements 10 in 5 months ago. It worked, but would frequently just quit. About the time I was going to return it, it started working fine. Yesterday, I got a message that something in Elements was corrupt, and I needed to uninstall and re-install. I did. Now, I get the message, "Could not complete your request because Photoshop Elements does not recognize this type of file" when trying to open RAW photos. I have downloaded Camera Raw 6.5 update for Elements 10, hoping that would help. It did not. I then installed Camera Raw 6.6 update for Elements 10. Still no luck.

The latest update for pse 10 in relation to camera raw is 6.7.
If i'm not mistaken Help>Updates should work from within the pse 10 editor.
What camera are the camera raw files from?

Similar Messages

  • Hi, I have a version of CS4 on my Mac.  I can not longer open Raw files with it from my Canon 5D.   I never had problems with it in the past.  What can I do?

    Hi, I have a version of CS4 on my Mac.  I can not longer open Raw files with it from my Canon 5D.   I never had problems with it in the past.  What can I do?

    is that the eos 5d?
    if so, you only need cr 3.3 or greater.  what version do you have in your cs4? (help>about plugins>camera raw)
    if you need to update it, http://www.adobe.com/downloads/updates/

  • Elements 8 no longer opening raw files since upgrading camera to 600D

    I am using elements 8 and windows XP. I have just upgraded my camera from a canon 450D to a 600D and now elements will not open my raw files, it states that they are the wrong type of files. I have been told that I require a patch to elements 8 so where do I find the patch and where in elements do I put it?

    Unfortunately, the 600D requires ACR 6.4.1 patch which is not available for PSE 8.
    Your options are
    1) use the Canon software
    2) Upgrade your PSE
    3) Use the free DNG converter to convert the CR2 files to DNG files which can then be used in PSE 8.
    see http://www.adobe.com/support/downloads/detail.jsp?ftpID=5389&promoid=DTEHR
    Brian

  • Sony Image Data Converter no longer opens RAW files

    After upgrading to Snow Leopard Sony Image Data Converter (ver 3.1) cannot open my RAW files. It sees the files but claims they are 0x0 pixels in size. It worked fine with Leopard 10.5.8.

    Image Data Converter v2.2.02 also fails to open any files but was OK in 10.5.8. Image Data Lightbox v1.0.02 does run OK, opens a directory of files fine, and converts them. The app crashes on exit every time however!
    Adobe Camera RAW and Adobe Elements v6 all work perfectly well. But I have never been able to see ARW images in Adobe Bridge!

  • Unable to open raw files from canon d70 in elements 12 help

    hi. just purchased elements 12 as i was told it would open my canon d70 raw files. have installed elements 12 and done the update from the update box in elements but still it wont open raw files. any help would be greatly appreciated.

    There is probably a way to hack your system into work with ACR 8.3 using the plug-in ZIP file from this page and copying it manually to the specific folder where it needs to go:
    http://helpx.adobe.com/x-productkb/multi/camera-raw-84-support-policy.html#To%20run%20Came ra%20Raw%20on%20Mac%20OS%2010.6,%20Windows%20XP,%20or%20Windows%20Vista,%20remove%20the%20 8.4%20plug-in%20and%20manually%20reinstall%20Camera%20Raw%208.3
    Download the 32-bit version of ACR 8.3 from the page, above.
    Unzip it to the file Camera Raw.8bi.
    Copy that new Camera Raw.8bi over the top of the existing one in this folder:
    C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\Elements 12\File Formats
    Then install the DNG Converter 8.3 as mentioned in the page, above.

  • How do I upgrade elements 10 to open raw files from my Canon 70d?

    How do I upgrade elements 10 to open raw files from my canon 70d?

    Normally, if there are any updates for your version of PSE then they should be offered to you automatically.  However, you can also check if there are any new updates by going to:
    Help >> Updates
    If your camera is relatively new then even by getting the updates you may not be able to edit raw files from the new camera because old versions of PSE are normally not updated as soon as the new version hits the market.  We are currently at version 13 so version 10 was stopped long time ago.  However, you can see a workaround at this link where I posted a video to get things moving:
    <Why can't I open my RAW files from my Nikon D7000 ?? I can open RAW files from my old Nikon D70's but not my D7000...>
    Hope this helps.

  • I can not open raw files in elements 12 any help please?

    I can not open raw files from my Nikon D610 in elements 12. (I have already downloaded raw converter 8.3 but to no avail) any help please would be appreciated.

    Hi,
    Can you confirm which Camera Raw PSE 12 is actually using by loading the editor and going to Help -> About Plug-in -> Camera Raw.
    If you do Help -> Updates it may install the latest camera raw of 8.4 - not on XP or Vista systems.
    Do you use any Nikon software to download the images? The older versions have been known to corrupt the files.
    See the following for more info.
    http://owl.phy.queensu.ca/~phil/exiftool/fix_corrupted_nef.html
    Brian

  • Opening Raw Files in Elements 9

    Just loaded my copy of Elements 9 which I upgraded to so that would open
    Raw files from my Nikon D7000.  However, when I try to open my
    files in Editor, no Raw Converter
    opens and I get a program error as reason.  What do I do

    If the error is wrong file type then you probably need to update to the newest version of camera raw.
    In the pse 9 editor go to Help>Updates and that should download and install the
    newest camera raw plugin.
    MTSTUNER

  • Cannot open raw files from my Nikon D3200 in Elements 11

    After I found I could not open raw files from my new Nikon D3200 in Elements 10, and did a couple hours of searching the web site, I upgraded to Elements 11. Elements 11 also will not open the raw files from the D3200

    I found the solution in a Light Room forum.  The problem was I was using an older version of View NX2 to transfer the files. I uninstalled that version and installed the version supplied with the D3200. The files now load into Elements 11 with no problem. Apparently the old version affects the content of  the NEF files, as Elements was not able to recognize them, and gave an error message that the files were from an unsupported camera.
    Thanks for looking into this, Don Rieser  

  • Photoshop Elements 9 and cannot open Raw files from my Canon EOS 1000D camera.

    I am using Photoshop Elements 9 on a Windows 7 based PC and would like to know why I cannot open Raw files produced by my Canon EOS 1000D camera.
    I have checked the version of the plug in as 6.5 for raw files which is supposed to open .cr2 files and should be compatible according to Adobe site info.
    any ideas for next move.
    Mick

    Hi,
    According to all of Adobe's charts, the Canon 1000D should be supported by the basic PSE 9 even without updates. When you said you checked the camera raw version in PSE, did you do that by going to the Help menu and selecting About plugins -> Camera raw?
    The Canon 1200D requires ACR 8.4 which is only compatible with PSE 12 - so for PSE 10 your brother would need the DNG converter.
    I can't find a sample raw file to try (I do have PSE 9). If you want to upload a sample file to dropbox and give me access, I could try it on my system.
    Have you tried opening one of your files on your brothers system?
    Nrian

  • Is there a possibility to open raw files from the Nikon D750 in photoshop elements 11?

    Is there a possibility to open raw files from the Nikon D750 in photoshop elements 11? I allready tried to install camera raw 8.7.1 but it doesn't work.

    Yes, I see:
    Letzte Aktualisierung
    16.04.2012
    The link I gave is listed in the faqs of this forum.
    Photoshop Elements FAQ List
    mfG
    Michel

  • Can no longer open PDF files from my emails sent from other websites. Problem seems to correlate with automatic upgrade of free adobe software (from version 11 to Reader DC)?

    Can no longer open PDF files from my emails sent from other websites. Problem seems to correlate with automatic upgrade of free adobe software (from version 11 to Reader DC)?

    To configure the browser to use Acrobat or Adobe Reader to open PDF files:
    1. Quit Internet Explorer(any other browser)
    2. Start Acrobat or Adobe Reader.
    3. Choose Edit > Preferences.
    4. Select Internet in the list on the left.
    5. Deselect(Uncheck) Display PDF in Browser, and click OK.
    6. Restart Internet Explorer

  • I can no longer open pdf files in safari 6.02.

    SAFARI CAN'T OPEN PDF'S ?
    I can no longer open pdf files in safari 6.02.  It worked fine up until  2 weeks ago.  The pdf's open in Foxfire and Chrome browsers.
    I can also download the pdf and open in acrobat directly.  Safari only shows the file as ASCII characters.
    Any suggestions?
    Thanks,
    GerryG860

    Back up all data.
    Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste (command-V) into the text box that opens, then press return.
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    I've seen an unconfirmed report that the "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you might need to remove it as well, if applicable.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • I can no longer import raw files from my Panasonic Lumix LX5 into Aperture 3.3.2 - raw files from my other Canon cameras are fine. Am still running Lion - NOT Mountain Lion. Tried all available software updates - no joy. Any ideas please?

    I can no longer import raw files from my Panasonic Lumix LX5 into Aperture 3.3.2 - raw files from my other Canon cameras are fine. Am still running Lion (10.7.4) - NOT Mountain Lion. Tried all available software updates - all up to date apparently but still no joy. OS X Lion shows the LX5 as a supported file format. I dont want to have to upgrade to Mountain Lion just to see if this solves the problem. Any ideas please.

    Since when did this happen? Directly after you upgraded to Aperture 3.3.2?
    If it happened directly after the upgrade the problem may be, that the raw support for your camera got lost. For some posters it helped to register the raw support again, see this post by Alan Roseman:
    Aperture 3 preview of raw file greenish
    If this does not help, you may need to reinstall Lion to bring back the raw support.
    But if the problem occured independent of a new installation, ypu may have a problem with your camera or the card you are using. Have you tried to use a different card or to reformat the card in the camera?

  • Because I can no longer open Adobe files, and have tried all obvious solutions, I've been told to defrag the Intel portion of my MacBook Pro. How do I do this?

    Because I can no longer open Adobe files, and have tried all obvious solutions, I've been told to defrag the Intel portion of my MacBook Pro. How do I do this?
    I never use the Intel side, and have never partitioned the MacBook Pro.
    Message was edited by: MacGirl221b

    I never use the Intel side,
    Not understood, Intel make the processor that runs your Mac, there is no other 'side' to your Mac.
    What Adobe application are you trying to open files with?

Maybe you are looking for