News feed for this forum

Hi
As I alluded to in my preceding post, the only newsfeed I can
find for the flex forums here is
"macromedia.flex.general_discussion", which points to the Flex 1.5
General Discussion forum.
Where's the newsfeed for the Flex 2.0 forum?
Cheers.
Adam

Cheers, yes, I know that. As per my original post (which
might not have been clear, sorry), these are the groups presented
by the newsfeed:
macromedia.flex.flex_builder
macromedia.flex.general_discussion
macromedia.flex.pricing_licensing
macromedia.flex.upgrade_migration
(Do you see a different list than that?)
And the "macromedia.flex.general_discussion" news group
points to the "Flex 1.5 General Discussion" web forum.
So. Back to what I asked...
"Where's the newsfeed for the Flex 2.0 forum?"
Adam

Similar Messages

RSS Feed for this forum

Hi,
I am connected to the RSS feed of this forum and the feed is sending only the first line of the text entered. So most of the times I get something like Hello, or Hi , and I don't have at least the few first lines.
Would it be possible to change the feed to add more lines ?
Oracle Application Express (APEX)
Thanks
Francis.

Anyone know how to setup to actualy post. I have tried quite a few options in Outlook Express but keep getting this error. I have put in my email address I use here, [email protected] Server adobeforums.com username agent86oz (and [email protected]) and my password.
Outlook Express could not post your message. Subject 'Re: RSS Feed For This Forum?', Account: 'adobeforums.com', Server: 'adobeforums.com', Protocol: NNTP, Server Response: '482 authentication rejected', Port: 119, Secure(SSL): No, Server Error: 482, Error Number: 0x800CCC17

New Use for this Forum

Why not use this forum to communicate ways to extend the life
of Freehand?
Longtime users all find workarounds... some people will have
to migrate, but not everyone. Even those that do may create
dual-boot computer environments to access Freehand.
There will be dead-ends of course, but there is usually an
answer for most problems.
I'm tired of having to relearn major programs when 90% of the
labor is just fine in the old program.
This is a problem, not just with Freehand, but other programs
as well.
I have no hatred... I just don't have time.

word

Does the RSS feed of this forum work for anyone else?

Call me old school but I still use RSS feeds to keep up with stuff and last month the feed for this forum quit working. After some investigation I discovered that it is not valid anymore :(
http://validator.w3.org/feed/check.cgi?url=https%3A%2F%2Fsocial.msdn.microsoft.com%2FForums%2Fen-US%2Fvsx%2Fthreads%3FoutputAs%3Drss
Who do I need to contact to fix this?
Frank

For which forum, this Forum Issues forum?
Looks to be the Visual Studio Integrate forum:
https://social.msdn.microsoft.com/Forums/vstudio/en-us/home?forum=vsx
The RSS feed seems to be working just fine for me in a browser.
https://social.msdn.microsoft.com/Forums/en-US/vsx/threads?outputAs=rss
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

RSS feed to this forum?

Does one exist?

This is untested, but I just tried creating an RSS feed for this forum on Dapper. Dapper is a neat tool for creating feeds for sites that don't provide them.
The feed: http://www.dapper.net/transform.php?dappName=AdobeLightroomForum&transformer=RSS&extraArg _title=Title&applyToUrl=http%3A%2F%2Fwww.adobeforums.com%2Fcgi-bin%2Fwebx%2F.3bc2cf0a%2F%3 F%40884.inCsijLUeWN%40
Dapper: http://www.dapper.net

App for this Forum

I was wondering if there is a app for this forum, if not there should be one.
Thanks

There is no app, but you can get an RSS app from the app store and then subscribe to the RSS feed for this forum.

What are rules of etiquette for this forum?

I have posted a few basic questions in recent times about java programming issues. Right now I am using JBuilder2005. I am relatively new to the Java progarmming community, and I don't know if JB2005 is considered evil over say, WebSphere, Eclipse, etc. But responses I have received for my basic questions (which I ended up finding my own answers to) have been less than friendly.
Case:
>>
Re: assing which servlet is the startup page? Author: IanSchneider Mar 11, 2005 3:54 PM (reply 1 of 1)
You gots to be crazy if you think I'm helping you with your assing. Whats JB2005 anyway? Whatever it is, it sounds like its an impediment to you knowing whats going on. Try looking in your web.xml and actually understanding how servlets work.
<<
I have received responses similar to this for other posts where people are conscientiously steering me in the wrong direction. Well, I am not posting to ruffle any feathers, but since I have not seen any specific rules on what to post/not post other than no disruptive stuff, my question is if this forum is like a Pay forum and/or an anti Borland forum (vs a forum for exchanging information on Java programming).
While I'm at it I am trying to use a DataExpress control from JB2005 to connect to an Access Database (for practice - we have Oracle but I am practicing on Access). I select the driver
sun.jdbc.odbc.JdbcOdbcDriver
then it asks for the URL, it gives me this option in the ...:
jdbc:odbc:MS Access Database
so where do I add the location of the mdb file? I can't get the control to connect. I can connect to Access if I just use code and read/insert rows of data, but I want to use a DataExpress TableDataSet control so I can load it up with rows of data from a database file in a client application. I can load up an html table of data in a servlet for display . But how can I display data the same way in a client app?
Is this forum even the correct forum for me to ask this question - or should I look for a Borland forum?
Thanks.

I have posted a few basic questions in recent times
about java programming issues. Right now I am using
JBuilder2005. I am relatively new to the Java
progarmming community, and I don't know if JB2005 is
considered evil over say, WebSphere, Eclipse, etc.
But responses I have received for my basic questions
s (which I ended up finding my own answers to) have
been less than friendly.I don't think people care for your brand of IDE (I'm using both JBuilder 2005 and Eclipse). People might be wary of newbies using any IDE, as they're usually in over their heads.
You gots to be crazy if you think I'm helping you
with your assing. Whats JB2005 anyway? Whatever it
is, it sounds like its an impediment to you knowing
whats going on. Try looking in your web.xml and
actually understanding how servlets work.Obvious: you posted a homework assignment, and people kicked your butt. And I guess Ian just didn't recognize "JB2005" means JBuilder 2005. I wouldn't say it's his fault.
I have received responses similar to this for other
posts where people are conscientiously steering me in
the wrong direction.Didn't happen in the above case.
Well, I am not posting to
ruffle any feathers, but since I have not seen any
specific rules on what to post/not post other than no
disruptive stuff, my question is if this forum is
like a Pay forum and/or an anti Borland forum (vs aNeither. But I urge you to read the following link:
http://www.catb.org/~esr/faqs/smart-questions.html
It's not at all about the etiquette for this forum, but for fora in general.
then it asks for the URL, it gives me this option in
the ...:
jdbc:odbc:MS Access Database
so where do I add the location of the mdb file? IYou don't. That's a mapping provided by the OS. Go to "System Controls" -> "Data Sources (ODBC)" or search the help for it if you don't find it, and set up the Access driver.

I used to have an application in my iPhone 4 and 4s that captures business card and creates its content to my contacts. Its no longer working with my i5. Can you recommend me a new apps for this same function

I used to have an application in my iPhone 4 and 4s that captures business card and creates its content to my contacts. Its no longer working with my i5. Can you recommend me a new apps for this same function

Try CardMunch it works well for me

How to change email address login for this forum

I no longer have the email address I use for this forum and was wondering how to change it if possible?

One of these links should help you:
http://www.info.apple.com/support/howtoid.html
Apple ID Assistance Form/Feedback

How do you set the time for this forum??? Not in nerd pleas

how do you set the time for this forum?

There were problems with the correct time display for postings, and based on another recent post this doesn't seem to have been fixed. My advice... don't worry about it.

Is there a FAQ document for this forum?

Does anyone know if a FAQ document for this forum exists anywhere? if yes, can someone put a link to it in a visible place? if not, let's create one because same questions are being asked over and over again...
gojko adzic
http://gojko.net

No there is not. And I left the word "unfortunately" out as a FAQ will make absolutely no difference to the posting habits of many newcomers around here.
They will ignore it as they are ignoring the Oracle documentation, ignoring the search facility of these forums, and ignoring the ability of Google to find answers. Never mind ignoring netiquette and claiming that their problems are so critically urgent that we have no choice but to stop doing the work we get paid for immediately, and jump to it, assisting them for free.
The only thing that makes an impact in this regard is the old lead pipe. That needs to be swung hard at such times to clearly point out what is not acceptable.

Need my Email Address Switched for This Forum-Been Trying for a Week

Need my Email Address Switched for This Forum-Been Trying for a Week.
Can an Administrator PM me and switch it?
thank you!

See post here for more information, but this is officially resolved!
As of 09/29/09, you can now change your email address for the forum via My Settings even if you have a community-only id. Many thanks to the mods for this update!
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

If i were to get this computer would i need a new network for this or what accessories would i need?

If i were to get this computer would i need a new network for this or what accessories would i need?

If you have WiFI which is not something extremely specific, and I believe it is not - you are fine with network, just go and buy you a computer and enjoy.

Severe test trying to register for this forum...

I've just registered for this forum, but I needed every ounce of my technical wits to achieve that...
I was asked for a "Screen Name" so ended up with Apodida (Hi there, other "Swifty" and "Swiftie").
Then I was asked for "*Word verification by reCAPTCHA".
The problem was, no CAPTCHA image appeared. My browser (Opera) accepts all images, so I presumed a browser issue and tried Firefox... same result. IE9... same again. Chrome v23... same. Safari... same.
If you think I'm laying it on a bit thick, it's because I seem to be heading for: http://swiftys.org.uk/images/dilbert.gif
The answer was to disable JavaScript, as the page then works in a purely textual mode. Of couse, no one who needs this information will find their way here...

Thanks for the answer, Apodida.
The problem is even more complicated that can be imagined.
You must have javascript enabled in order to log into the main HP Passport screen. If it is not enabled, the button to login using your username and password will not appear. If you can't log into HP Passport, you can't participate in any discussions.
However, if you've never participated in the discussion forum and do not have a forum username associated to your HP Passport account, you'll need to register a username and go through the ReCaptcha test to prove that you're a human being. If you have Javascript enabled in your browser, the ReCaptcha image will not appear on the screen. Therefore, you must disable Javascript in order to register and participate in the forum.
That is just plain dumb. It's certainly apparent to me that the discussion forum and the HP Passport website are managed by different web devs/admins who aren't talking to each other because their separate browser requirements are at conflict with each other. The end result - the users suffer, leaving the impression that HP doesn't know how to take care of their business.

Firefox search plugin for this forum

Hey!
I made a Firefox search plugin for this forum:
http://cip.uni-trier.de/zaplatynski/moz-search/
I am just too lazy for the two clicks to get the search form!
Note: The installation instructions apply just for the Uni Trier search plugins... I need there a redirection page.
I hope it will be usefull for everyone. I plan to make one for the AUR too.
So long,
Marian
P.S. If I get some time, I will make a nicer icon...

Finally, I made it available:
http://cip.uni-trier.de/zaplatynski/moz … linux.html
Reviewed all search plugins by others and adapted them if needed.
Please post any comments bugs. I will do some plugins for google in the next time.
Greetings,
Marian

News feed for this forum

Similar Messages

Maybe you are looking for