News feeds stop at a certain point in fb after upgrading to ios7!

News feeds stop after an hour or two of news in fb after upgrading to ios7 on an iPad 2! Just get a little gray dot at the bottom of the feed shows up and nothing loads after that point.

I've honestly found the best way to access facebook on the iPad is through safari. The app is buggy at best.

Similar Messages

Mountain Lion download stops at a certain point (79.34Mb)

I'm trying to download Mountain Lion. The download stops at a certain point (79.34Mb) and nothing I can do will restart it. I have followed the tips in the 'restarting a download' page and tried cancelling the download and it always stops and the same point. The purchase page in appstore shows a Pause button, but pausing and resuming doesn't restart the download. What can I do now?

http://www.apple.com/support/mac/app-store/contact.html?form=account.They're responsible for getting this abysmal delivery system to work.

Why am I facing so many problem after upgrading to ios7, my phone hangs/stuck many times, applications just stop working and close themselves, battery drainage,Facebook and all applications don't work properly. What should I do? They punished me for upgra

I'm using iPhone 5
Why am I facing so many problem after upgrading to ios7, my phone hangs/stuck many times, applications just stop working and close themselves, battery drainage,Facebook and all applications don't work properly. What should I do? They punished me for upgrading to ios7. I now hate apple and I'm thing of getting samsung.

Basic troubleshooting
Reset
Restore with backup
Restore as new ( better )

Siri stopped working on my iPhone 5 after upgrading to iOS7

Siri stopped working on my iPhone 5 after upgrading to iOS7...Does anybody know how to fix this problem?

To use Siri:
1. It must be on (Settings > General > Siri)
2. You must be connected to the internet
3. You must be in an area where Siri is permitted (it is not permitted, for example, in certain countries).

Facebook app on iPad air news feed stops and won't load more

When I scroll down news feed on Facebook app, it stops after less than 1 hr ago. There is a grey circle and I can pull down, but it won't load more. I tried re downloading app, but it still stops after only a few stories.

Definitely a lag, but reloading did not help. It just stops after a few stories, but if I quit and come back, it will usually go a bit further back. I recently upgraded to the Ipad air. Never had this problem with my old Original Ipad. Any other ideas?

Love my new ipad. But after upgrading to ios7 Safari became dodgy. Now it is frozen in a white screen and nothing will free it. Everything else on the ipad works fine. I deleted data, history, cookies, etc. Same problem. No change after power down.

Everything worked fine on my new ipad. After I upgraded to ios7 it still worked fine even if it looked very different. But Safari started acting strangely (it is starting the same thing on my iPhone 4s, too). Finally, it froze in state with no URL, no keyboard will come up, I can get Safari to close and start, but not actually function. I went into settings and deleted all the cookies, data, history, and so forth. Same state. I powered down the iPad and restarted. Same state. I tried a trick were I held down the button to bring up the power down stripe and then holding down the home button. Same state.
What can I do? Can I delete Safari and re-install it somehow? Should I take it to an Apple store?

If powering down with hard reset (press and hold two buttons Power and home) will not give positive results follow that article
iTunes: Restoring iOS software - Support - Apple
before you do restore backup using that article
iOS: How to back up and restore your content - Support - Apple

I've just downloaded itunes on a new computer, and I'm downloading music from the cloud, but it seems to stick on certain songs and won't download them at all, stopping at a certain point. How do I get round this?

Hi all,
I've just downloaded itunes onto a new computer, and I'm currently downloading previously owned music from the cloud. However, it keeps sticking on various songs - it will get part of the way through and just stop, this seems to happen to about 1 in 10 songs. How do I get round this?
Also, once I've finished dowloading from the cloud, how do I get my library to display only the songs I've downloaded, and not all the other ones that I don't want anymore?
Cheers, Alex

On the new laptop, launch iTunes. From the menu bar click Store / Authorize This Computer.
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer

Stopping animations at certain points on the timeline.

Hi all..
Lets say i have a flashing button in a 2 second loop, "pointA" to "pointB"...
at second 0 ("pointA") the animation begins and at second 2 ("pointB") the animation return to second 0 with the code sym.play("pointA");
when a user clicks the flashing button i have another animation that starts and i would like the flashing button to stop
How do i tell the flashing button animation to reach "pointB" in the animation and then stop, at the moment all i can do is tell it to stop when a user click the button which makes it stop mid-animation
I understand that i can stop an animation by the following code, but i can get it to finish its animation and then stop...
sym.getComposition().getStage().getSymbol("flashingButton").stop("pointA");
Thanks for reading!.
Justin..

Hi, Thanks for explaining this...
If you can please could you take 5 to look at the basic project i have uploaded to the link below..
http://adobe.ly/1hgZp81
I have added your state machine to the mix and everything is working as it should but i need each animation to end before a new one begins
There are 4 animations that are triggered by events..
1:READY
2:WAITING
3:PLAYING
4:PAUSED
i would like for an animation to end before the new one begins even though an event has fired. This is because eventually the animations will all be on top of each other to create a seamless animation...
I have put notes by my code and sectioned it out to help make it clear
you will find code in the following places
FULL CODE
STAGE
CLICKBOX
READY>READYB
WAITING>WAITINGB
PLAYING>PLAYINGB
PAUSED>PAUSEDB
when you click "click to play" it will load an audio stream from a reputable website (ABC Jazz) so nothing silly going on!...
The full rundown
When you load the file into a web browser the "ready" event fires and starts the "ready" animation.
Then when you click "click to play" the "waiting" event fires causing the "waiting" animation to play (its basically buffering audio while this event is firing).
Then when enough audio has buffered it fires the "playing" event and the "playing" animation occurs and you start to hear the audio stream.
When you click "click to pause" the "pause" event fires and the "paused" animation begins.
then the cycle begins again but the "ready" event is no longer required so when you click "click to play" the "waiting" event fires and so on...
NOTE: i am using a open source script for the audio stream called jplayer (i have loaded the script into the edge file that i have given a link for)
NOTE: the only way to make this script initiate is to add <div id="liveStream"></div> to the events.html file (otherwise i can not send or recieve commands)
I guess what im asking is:
how do i make an animation end (finish its 2 second animation) before the new one begins
could you take a quick look at my code to make sure i am not running functions too many times (you will see my notes) and to check to see if i have written things correctly, as i am new to this i am finding that there are 100 ways how not to write code and only a few ways how best to write code
This project is for an audio stream and is for personal & public use, it is not being sold and no money will be made from the end result. (its all about the love 4 music!)
Many thanks
Justin

Why my fla. animation stops at a certain point after previewing it in captivate 3

I have developed an animation using flash CS3. The animation works fine in flash (test movie, and published swf). When I inserted the fla. (insert animation) in my Captivate 3 slide, it stops at the exact same point each time while previewing the animation through the web browser. I have read on this blog that it may be a button or other objects on the slide that has a timer set. I checked the timeline. All of my objects are set at 11 seconds. There are rollovers on the same slide. I have tried to inserting a click box with the "pause project until user clicks" option, syncing the fps, redoing the flash animation and nothing works.
Can anyone help me on this?

Hi there
It may depend on how you created the animation in Flash. Is the animation supposed to loop? If so, did you animate on the main timeline? If you did, that may explain it. You need to animate in something called a "Movie Clip", then insert the Movie Clip on your main Flash timeline.
And thus I have managed to totally expend any knowledge I possess regarding Flash. Most of it is a mystery, in a fog of an enigma, cloaked in a conundrum.
Cheers... Rick
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

Blu Ray building process stops at a certain point in Encore CS 5.5 for Mac....

In Encore CS 5.5, I am trying to author a 3:21 hour long video as one timeline imported from PPRO CS5.5 on a BD-DL. File size is 38.30GB. In transcoding everything works normal. When it comes to building, it stops at 26.87 GB or 26.92 GB. This has been happening third time in a row. From the sound it looks that Blu Ray burner is trying to continue with the burning process, but nothing happens. When I tried to burn the file as Image, i got Error Code 25. Can anyone help?

Did it give any error when you say that it stopped at some point while burning the disc? If it didn't give any error, for how long the burning did not proceed further? Sometimes the progress bar might stuck at some point but the burning keeps on going. You might want it to go overnight to see if this really hangs at that point.
Error code 25 while burning a dual layer image is a bug in 5.5. This is related to some kind of layer break for dual layer image. This should have been fixed in 6.0.1 (patch update to 6.0)
-Ramesh.

How to make java "stop" at some certain point?

Hello, all. Currently I am trying to implement a slideshow method, which will display next photos every 0.2 seconds in a slide fashion. The problem is that while loop may be too quick to display every photo, so after some time, I can directly see the last photo. What can I do then?
          while(currentNode.getNextLeaf() != null)
               long startTime = System.currentTimeMillis();
               double interval = 0.0;
               do
                    long endTime = System.currentTimeMillis();
                    interval = endTime-startTime;
               }while(interval < SlideShowInterval*1000);
               nextNode = currentNode.getNextLeaf();
               treeNode = nextNode.getPath();
               treePath = new TreePath(treeNode);
               currentNode = nextNode;
               TreeList.setSelectionPath(treePath);
          }

Try this:
try {
// number of milliseconds to wait
Thread.sleep(200LL);
catch(InterruptedException ie) {
ie.printStackTrace();
}

Hello, my iphone was updating, and it stopped at a certain point and now it hasn't been going on for like 30 minutes, should i disconnect?

As I said my iphone has stopped updating, what can i do?

Hello there, HeyItsEthan13.
The following Knowledge Base offers some steps to try for the issue you're describing:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Specifically:
Battery does not charge from the USB power adapter
Important: Only original iPhone can be charged from a FireWire-based power source. If iPhone is connected to a computer that's turned off or is in sleep or standby mode, the battery may drain.
Verify that the outlet being used is working.
Try another USB power adapter if available.
If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
Try another USB cable if available.
Also refer to iPhone and iPod touch: Charging the battery.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Deskjet 5440 stopped printing wirelessly from my MacBook Pro after upgrading to OS 10.8

My home printer is connected by cable to a desktop Mac (Power Mac G5). I have always printed wirelessly to it from my MacBook Pro laptop through our home wireless network. However, just recently I upgraded the operating system on my laptop to 10.8.2. At the same time, I upgraded the HP driver software (from HP) that is supposed to allow the 5440 to work with the new OS. Since then, I can print from my laptop if it is connected by cable to the printer, but not wirelessly. When I attempt to print wirelessly, get a message that says the printer is not connected.

So you are using Printer Sharing on the PowerMac? If so, on the PowerMac, go to System Preferences > Print & Fax and delete the printer with the '-' sign at the bottom of the printer list. Re-add it with the '+' sign.
Make sure that Printer Sharing is checked and that in System Preferences > Sharing that Printer Sharing is also checked there.
Now, on the MacBook Pro, go to System Preferences > Print & Scan and click the '+' sign to add the printer.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Not all photos in iphoto sync to new ipad after upgraded to ios7

question as above, already sync clean folder to ipad and reset/empty the ipad iphoto fews times.

If the file format is compatible with the iPad, the photos should sync. The camera will name the files automatically as far as I know and if you never changed the names before - and simply imported the photos into iPhoto, that shouldn't matter.
Deleting the iPod Photo Cache folder seems to work for many, many users with this problem. There is no guarantee that it will work, but it is easy to do and it's harmless since a new photo cache folder will be created when you sync again.
Here is an article that explains how to delete the folder and where itcan be found.
http://support.apple.com/kb/ts1314

Unable to see certain folders on server after upgrading to mountain lion

Hello, I recently upgraded from lion to mountain lion on my MacBook Pro.
With lion I would connect to the server at work through finder under shared. Now with mountina lion, the server still shows up but when I connect to it only shows 3 folders there now when there are a lot more than that in there. I finally was able to connect to the folder I needed by hitting command + K and tryping out the path with smb.
The folder appears as an external disk icon when I connect to it like this so I guess maybe mountain lion recategorizes it as such and no longer displays it in finder when I connect to the server. Does anyone know how to fix this?

Hello nikkjazz. Welcome to the Apple Discussions!
The 802.11n AirPort Extreme Base Station (AEBSn) supports USB storage devices that use a block size of 512 bytes ... and is true whether the device is formatted for HFS+, FAT16 or FAT32. If yours is not, then it may explain why you can see the folders when the drive is directly attached to the Mac, but not so when connected to the AEBSn.

News feeds stop at a certain point in fb after upgrading to ios7!

Similar Messages

Maybe you are looking for