News paper format

how can we do newpaper format in scripts.. how to use...

Do you mean printing on both sides of the page?  If so the attributes of the page (in either SAPscript or Smartforms) includes a setting 'Print mode' which allows you to set duplex printing.
You will of course need a printer that can support duplex printing too.
Regards,
Nick

Similar Messages

  • Smartform output in news paper format

    Hi All,
    How to print the data in the main window of a smartform in news paper format like First colum some data and second colum some data(after filling the first column data).
    Regards
    mahesh

    Hi,
    This can be done using table nodes with appropriate line types and table widths designed as per the news paper format.
    Also in what kind of structured way the data is passed onto the smartform interface matters here.
    Suppose you have the data required for the first column in a single table then use appropriate table width as required for the first column of the news paper format.
    Then adjacent to it use another table storing the data required for the second column.
    This way you can display the data in a news paper format.
    Regards,
    Ram

  • How to print the form output in news paper format

    Hi All,
    How we will print the data in the output in newspaper format in SAP script?
    Can any body give some idea on this.
    Thanks&Regards
    Mahesh

    If what I understand is correct..!!!!!!!!!
    design the windows in required format. and make the window belongs to all required pages and just type the matter there itself. then run the form from ABAP editor.
    Cheers.

  • Error in determining Paper Format for Printout triggering from ABAP Code

    Hi Experts,
    I am trying to trigger a printout from my ABAP code using "NEW-PAGE PRINT ON ...... NEW-PAGE PRINT OFF" statement.
    I am passing the Print Parameters using the FM "GET_PRINT_PARAMETERS" as below:
        CALL FUNCTION 'GET_PRINT_PARAMETERS'
          EXPORTING
            destination    = ls_options-tddest
            copies         = 1
            list_name      = 'Notification'
            list_text      = 'ERROR NOTIFICATION'
            immediately    = 'X'
            release        = 'X'
            new_list_id    = ' '
    *        expiration     =
            line_size      = 79
            line_count     = 23
            layout         = 'X_65_80'
            sap_cover_page = ' '
            receiver       = 'SAP*'
            department     = 'System'
            no_dialog      = 'X'
          IMPORTING
            out_parameters = lv_params.
    But I am facing a problem. Though I am passing X_65_80 to the LAYOUT in the Function Module, it is trying to print in LETTER format. But the specified printer as the printer supports only A4 paper format and as a result, I am not getting any printout.
    Kindly help me with your suggestions to resolve this.
    Thanks in advance.
    Regards,
    Keerthi

    Hi,
    I just found that this problem is even stranger.
    I am able to print the said message on my local printer but when I try to print the same message on a different printer located at a different location, the printout does not get triggered. I am not getting any error messages also in this case.
    What could be the possible reason for this?
    Kindly share your views/experience with me on this one.
    Thank you.
    Regards,
    Keerthi

  • Managing huge data for  online news paper

    Hi
    I am currently working on a project for an online news paper. We at present are analysing the ways for managing the huge amount of data ie for current news and archives.
    The best way so far in our mind, is storing them in the files in zip format. Can anyone please suggest us a more sophisticated and efficient way available.
    Your help will be greatly appreciated. Suggestion for use of new technology is also welcome.
    Thanks
    keyur

    Hi thanks for your help everyone.
    watertownjordan that tip definitely helped. We are
    also considering intermedia option as indicated by one
    of other forum member. I will definitely keep you
    posted as I am sure I will have other questions.::))).
    I also did run your example posted on that site. yeah
    it looks cool. But what we are thinking is we should
    generate auto-Id. I am still puzzled why did you give
    option to choose Id for the news or article. Because
    it may clash and we will have to incorporate the check
    in our programming (hence increased code and
    processing). If you have it there for some specific
    purpose I would be interested in knowing it.
    Anyways thanks everyone for your valuable contribution
    and I hope I will continue receving your help on this
    topic in future.
    keyurThanks alot. Glad you liked it. The program right now (completed in just 8 hours) is a sample of the articecture. It is for example purposes only now, I will be adding better functionality day by day. Be sure to check it out.
    P.S. Would your newspaper be willing to talk about using my help, I don't cost much and I already have code. You see I am unemployed like the rest of the world. Need a little help.

  • Printing Problem in New Page Format

    Hi Everybody,
                  I have an issue lying  long time in my Company.
            Abap person asked me to create a new page format with new page sizing and all. i created it. this is actually for Voucher printing which does not require A4 size. so that i specified specific paper size in that.
         Voucher is Printing in the Specified Size, ok. But, after printing it, the printer automatically Rolls till the end of the paper.(Probably this would have taken A4 by Default)
         the issue is, we need to stop this rolling and we need to make this printing as specified.since it is continuous printing, every time we cant manually rotate the page.(Printer Epson Dot Matrix)
    Is this either can be sorted out by ABAP or Basis Person.  
       What can be done from Our Basis Side?
    Thanks,
    Siva

    Hi,
    How you solved this problem?
    I am also facing the same problem.
    Thanks in advance
    Sameer Dhuke
    Edited by: sameer dhuke on Feb 16, 2010 11:27 AM

  • New Page Format implentation in Sap Scripts and Reports

    Hi,
       I want to print Report details and also some of the SAP Script details on the paper size of 350MM width and 310MM Height in the PORTRAIT format.
       So i created new page format with these dimensions.
       How i can use this for reports. So i can set these parameters while taking output from Report.
       Pls specify if any configuration required for this.
    Thanks in Advance,
    Regards,
    Pavan.

    In SAPscript, you set the Page Format for the document in the "Page Format" field of the "Basic Settings" page of the documents "Header" information. The popup list of this field will show all available formats in your system, so this is a ggod way to make sure your new format is set up properly.
    For reports, page format is set either with the LINE-SIZE addition to the REPORT and NEW-PAGE commands, or through the PARAMETERS addition to the NEW-PAGE command. When you use LINE-SIZE the print system picks the format for you, based on the available formats in the systems.
    I don't remember if there is an activation step for Page Formats, or if saving is all you have to do.

  • Lost paper format in CS5

    I use a Canon Pixma 6700D printer with Photoshop CS5. I used to have the paper format 10x15 cm included from the Pixma 6700D driver available in photoshop, but suddenly it's gone!
    I've tried reinstalling both the driver and PS CS5, in that order, but I still don't see the format. There are other formats from 6700D available in PS CS5, but not 10x15 cm.
    Help anyone?

    If you have a profile for the same paper in a different size, use it as a template to save as a new custom profile.

  • How can I skip to a new year in the new calendar format?

    I am not impressed with the new icloud calendar format. It is too white and it is difficult to see the days. However main complaint is that you cannot skip to the next year quickly. On the previous format you could selected 2014 and immediately select a month. In this new 'improved' format you have to scroll through all the invening moths. Can you fix this Apple or tell us how we can skip forwards 12 months quickly?
    Iain

    I agree about the lack of convenience with regard to skipping years in the near future...I'm okay with the general design, but the new way of skipping years is not a step forward considering how I've used it in the past.However, the new way could be advantageous when skipping a big block of years.

  • How to print text in paper format iin smartforms

    Hi all,
      I want a question that  how to print text in paper format like  paper divides into 2 parts and if the firstpart is full of text i.e., it exceeds the first page the text will be displyed in the second part of the first page.
    Usefull answers will be awarded.
    Thanks all...

    Hi,
    U create two windows in the page and same as like second page.
    but in first page first window select the condition print only on first page.
    in second window select conditin print only on second page.
    first try without creating a secondpage. if that doesn't workout create secondpage and try.
    Assign points if useful.
    Regards
    (YUGANDHAR.P)

  • Does the 1st generation IPod suffle play new MP4 format

    We have an IPod shuffle  1 GB First Gen I Think not sure how to tell. Anyway unit has always worked. Little green light comes on flashes when controls are pushed on it. I just removed and replaced the music on the unit and now I do not hear anything. Whether the unit is in its dock and pluged in usb or a set of ear buds are pluged in nothing plays. Is their a problem with the newer MP4 format  and this unit playing it?

    Be nice if someone replys. It looks like I ma have the 2nd generation Ipod 1 gb. Small 1" unit. Still will not play the songs loaded. Again is music format version a problem?

  • New Page Format in Smartforms

    Hi All,
    I am working on smartforms.
    I have created a new page format of width 25 cm and width 30cm according to client's requirement.
    Smartform is  for customer invoice which is a pre-printed and i have to get data into that.
    In sform i have given the my own page format name.
    Now problem is am getting print preview correctly but while giving print its givivng the error
    ' OUTPUT COULD NOT BE ISSUED' and print is not coming.
    Please help me regarding this issue.
      Thanks in advance.
    Regards,
    Murthy.

    Hi,
    I have checked it but its ok.
    I have created page format through SPAD only.
    Regards,
    Murthy.

  • Creation of new page format

    Hi
    I have created new page format and added it to format and then to device by using SPAD.
    This new page size is 8 X 6 Portrait( Is there any standard sap page format available with this size)
    the problem is that when print out is taken by using script the first page of the first document is correctly printed , But from second document onward the printer scrolls more than required, the print out is taken in continues page.
    Where to set the scrolling space and all
    Hoping help

    I think it is Printer problem. Check your printer settings.

  • HT1338 I was backing up my MacBook with Time Machine on my new (correctly formatted) external hard drive.  It was going fine when my 2 yo knocked the hard drive.  Now TM said "failed" and the Mac refuses to recognize the external hard drive.  Help please?

    I was backing up my MacBook with Time Machine and using my new (correctly formatted) external hard drive.  All was going well when my 2 yo knocked the disk leading to a "failure" by time machine (Latest Backup:  Failed).  Now the MacBook will not even recognize the hard drive.  I have rebooted, tried all I can think of, but no acknowledgement of the drive.  The drive itself makes noise and vibrates as if working, but nothing from the Mac.  Please help or $100 down the drain...  Thank you.

    You may have already done these resets in the "tried all I can think of " portion of your post.....if not then here they are.....
    PRAM
    support.apple.com/kb/HT1379
    SMC
    support.apple.com/kb/HT3964
    .....hopefully that is all that is required.....

  • QM-How to add a New "Output Format" in Certificate Profile?

    Hello QM Functional Experts,
    Can any of you tell me how we can add a custom "Output Format" in the Certificate Profile (QC01/2/3). I tried the Configuration approach via QM-Quality Certificates-Certificate Profile-Define Data Origin. I do not see an option here to add a New Output Format.
    If this is posted in a wrong forum, I apologize. I am not able to find the correct forum for QM. Please redirect me and I will be glad to post it in the right forum.
    Thanks,
    Nagesh

    Hi,
    You can use the FM ..RV_MESSAGE_UPDATE..
    Thanks
    Naren

Maybe you are looking for