News Sap Portal

Hi Experts,
Is there a native solution to post News in Sap Portal, and show it in a iView?
Look the image: [http://dopaulo.com/trecos/imgs/3.JPG|http://dopaulo.com/trecos/imgs/3.JPG]
Thx!

Paulo,
Its possible to display news items in SAP Portal in the following Ways.
XML Forms:
Design a XML and publish static news items in portals.
Custom Component Cretaion:
You can create your own custom component as per your requirement and display it in portal. The custom applications can be a Web Dynpro Java/ABAP / DSP Dynpage.
Ram

Similar Messages

  • What's is new in Sap Portal 7.1?

    What's is new in Sap Portal 7.1? are new features?

    Hello Ws6kid
    Welcome to Apple Support Communities
    The Mid 2007 iMac 7,1 takes DDR2 SDRAM 667MHz PC2-5300 modules.
    see > http://support.apple.com/kb/HT1423
    For quality tested RAM with a lifetime warranty, check out OWC
    see > http://eshop.macsales.com/shop/apple/memory/iMac/IntelCore_2Duo
    I went what a WD Caviar Blue in my Intel iMac, it runs cooler and quieter that the factory Seagate Barracuda ever did. see > http://www.wdc.com/en/products/index.asp?cat=3
    Bad news on the Graphic chips in most iMac's though, there soldered in on the logic boards.
    Dennis

  • SAPGUI iview from SAP Portal = create new session  results in empty screen

    we use ep700 sp10 and sapgui 6.40 compilation 5 . we have a sapgui iview which starts the login to the R/3 system and shows the user menu with some transactions.
    if the user now creates a new session  with the buttom "create new session" in the sapgui screen he gets a new but empty session  ==> i expected , that he gets the normal sap entry screen with the user and sap menu.
    does anybody now how to get that ?
    many thanks hannes toefferl

    Hi,
    Go to the file .../irj/root/WEB-INF/portal/portalapps/com.sap.portal.appintegrator.sap/property/Transaction/WinGuiRenderLayer.properties
    In this file, change -wp=true to -wp=false and also Workplace=true to Workplace=false.
    Restart the portal for the change to take effect.
    Hope this helps.
    Cheers,
    Sunil
    PS: Reward points for helpful answers.

  • Sap portal new users anonymous2

    Hello everyone
    I do not know if it is the right forum
    SAP portal I want to create a new user anonymous2 and do these steps :
    User Administrator->Identtity Management ->Create User :
    Logon ID:anonymous2
    Disable password
    In Tab Assigned Groups add Everyone e Anonymous Users
    The error is when I add Anonymous Users and save me from this error:
    The user has no authorization for the allocation of entities. Launch a new search based on the amount allocated in order to display the correct status
    Help me please

    Captain,
    Could you please explain that what kind of user you want to create.
    Thanks,
    Hamendra

  • Create SSO on SAP portal to ECC 6.0 EHP4 backend

    Hello,
    I want to create a SSO connection form my SAP Portal server to my ECC 6.0 EHP4 Backend system.
    My JAVA Portal is installed on the same system as the ECC 6.0 backend system.
    For the configuration I follow the steps as described in the document: http://www.sap-img.com/basis/configure-the-sso-single-sign-on-for-portal.htm.
    At point 5.3 I have to set the Backend System as "ACL" in the Portal. So Iu2019m still in the Visual administrator from point 5.2 but now I go to the path Server --> Services --> Security  Provider --> Ticket.
    Here I choose the authentication tab and want to add the com.sap.security.core.server.jass.EvaluateTicketLoginModule. Buth when I press the Add button I get a list of available login members. In this list there is no com.sap.security.core.server.jass.EvaluateTicketLoginModule login module available. Does someone know what Iu2019m doing wrong or how I could add the correct login module?
    I attach a screen shot from Visual administrator.
    Kind regards,
    Richard Meijn
    Edited by: Richard Meijn on Aug 10, 2011 8:20 AM

    Cahtal,
    Thanks for you quick reaction but it's not all clear for me. So could you explain it a little bit more detailed fo me.
    If I write something wrong please correct me. I understand the following
    So If I am on the "Authentication" tab I press the Add new button
    In the list which shows up I select the u201CEvaluateTicketLoginModuleu201D
    Here I change the name and option value to trustedsys01=<PORTAL_SID>, <PORTAL_CLIENT>
    Kind regards,
    Richard Meijn

  • Multiple versions of the same Web Dynpro application on the same SAP Portal

    I have a single application (local development) and deploy directly to a SAP Portal(NW 7.0) from NWDS Version: 7.0.15
    No problems there, works like a charm.
    But I want to have multiple versions of the same application on one portal. Eg. ill build a version 1.0 for test and deploy this. Then continue to work on version 1.1 deploying this directly on the portal. The two versions should now co-existing under different names and/or packages.
    Please help.

    Hi Kim,
    May be you can try this and see if this works for you. I am not 100% sure if it will work for you, but worth a try I guess. Create a Test WebDynpro project and try the following steps on this project. If they work  out correctly and serve the purpose for you only then try them on your actual Web Dynpro project.
    1. Create a test Web Dynpro project  say "TestWDProject" with Component say "Comp1" and the default views and windows etc.
    Also create some working application our of this component and Windows using the Context.
    2. Right click the "Comp1" and select Copy.
    3. Right click 'Components" node in the project structure and select "Paste"
    4.This step will try to paste the copy of Comp1 as a new Component.
    5. You can change the Name and Package of the Component.
    6.Similarly you'll get the prompts for views,windows etc.
    7.Once you have copied everything, Just check if everything looks good.
    8.Now you can create a new Application using this new component and the Component Interface View and Deploy it.
    9.Test whether the Application created out of this copy works same as the original component.
    You can also try to create another Web Dynpro project and paste the Comp1 in the Components node of that new project and perform the same steps.
    Again, try with these Test Projects and see if this serves your purpose before applying the steps on actual projects.
    Regards,
    Ajay

  • Error while creating user in LDAP (MS ADS) from SAP Portal 7.0

    Hi,
    Is it obliged to use SSL connection to create new user in LDAP (MS ADS) from SAP Portal 7.0 ?
    I've configured the UME with ldap server adress and port 389. And use configuration file "dataSourceConfiguration_ads_writeable_db.xml"
    I succeed to view users existing in LDAP but when I try to create new user I've the following error message:
    LDAP: error code 53 - 0000001F: SvcErr: DSID-031A0FC0, problem 5003 (WILL_NOT_PERFORM), data 0)
    Thanks and regards

    check this link
    http://help.sap.com/saphelp_nw70/helpdata/EN/37/cfd93f130f9115e10000000a155106/frameset.htm
    and at the end of the page there is a qoute "We strongly recommend that you configure SSL between the UME and the LDAP directory. Some LDAP directories, such as Microsoft Active Directory Server, require an SSL connection if you want to create users on the LDAP directory"
    hence follow this link to configure SSL
    http://help.sap.com/saphelp_nw70/helpdata/EN/7d/77fa735e5f47a2a50b5336fd1b5a61/frameset.htm
    hope this helps..
    [Rahul|http://rahulursportal.blogspot.com/]

  • ESS for R/3 4.6C on new NetWeaver Portal -- deployment fails!

    Hi ESS Experts,
    We're having problems deploying the older BP for ESS R/3 4.6C to our Netweaver Portal. Our Software Deployment Manager canu2019t install the file. Normally, BPs are .sca files but the BP for ESS 4.6C is a .zip file. We can manually rename the .zip to .sca, which is then shown in the SDM but the deployment always fails.
    How can we install this BP for ESS 4.6C on our newer SAP NW Portal used for our BW system?
    Many thanks,
    Andrew

    Hi Andrew
    Have you tried to unzip the file and identify the required deployment files?
    Further to this -->
    If you go to /swdc it states BP ESS 4.6C-4.7 50.4 (no longer in maintenance) - this product is no longer in
    mainstream maintainence
    Also there are no guarantees that 46C products will work with Enterprise Portal versions from other SAP product families
    e.g NW 700 with ESS 46C
    If you have extended maintainence for 46C perhaps you could open a CSS/OSS message in component BC-CTS-SDM
    to investigate why the installation fails and whether there is any workaround
    Hope this helps
    Stuart

  • How to move files from one folder to another folder in webdynpro java for sap portal

    Dear Experts,
    I wan to move files from one folder to another folder in SAP portal 7.3 programmatically in webdynpro java.
    My requirement is in my portal 1000 transport packages is their. Now i want to move 1 to 200 TP's into Archive folder.
    Can you please help me how to do in through portal or wd java ...
    Regards
    Chakri

    Hello,
    Do you know what the difference between copying a file this way :
    ** Fast & simple file copy. */
    public static void copy(File source, File dest) throws IOException {
    FileChannel in = null, out = null;
    try {         
    in = new FileInputStream(source).getChannel();
    out = new FileOutputStream(dest).getChannel();
    long size = in.size();
    MappedByteBuffer buf = in.map(FileChannel.MapMode.READ_ONLY, 0, size);
    out.write(buf);
    } finally {
    if (in != null) in.close();
    if (out != null) out.close();
    ================SECOND WAY============
    AND THIS WAY:
    // Move file (src) to File/directory dest.
    public static synchronized void move(File src, File dest) throws FileNotFoundException, IOException {
    copy(src, dest);
    src.delete();
    // Copy file (src) to File/directory dest.
    public static synchronized void copy(File src, File dest) throws IOException {
    InputStream in = new FileInputStream(src);
    OutputStream out = new FileOutputStream(dest);
    // Transfer bytes from in to out
    byte[] buf = new byte[1024];
    int len;
    while ((len = in.read(buf)) > 0) {
    out.write(buf, 0, len);
    in.close();
    out.close();
    And which is better? I read up on what each kind of does but still a bit unclear as to when it is good to use which.
    Thanks in advance,
    JavaGirl

  • CALL WEBI Report from SAP Portal

    Hi Experts,
    I need to call WEBI report from SAP Portal, is it possible?
    The submitted report will be opened in the same window?
    Kind Regads.

    Hi
    You can call SAP portal from WebI Report...
    insert blank cell in the report / or select the cell whaere do you want to in the report
    and then Right click and select hyper link.
    Enter the portal address
    It will be opened in the same or new window based on your settings.
    Target Window : New Window ..then it will open new window.

  • Transaction iView(from remote source) does not open a new SAP session

    Hi All,
    We are on portal 7.4 and are calling a transaction from ECC system. Within the transaction we have a button which displays graphs based on the output of the transaction. Since we are calling this transaction from portal, a new session does not open after clicking on this button.
    In order to enable a new session, I have changed the configuration for 'disable new session buttons in SAP GUI' to false yet the new SAP session does not open. I have also verified the webgui setting and ensured that we do not have '~singletransaction' maintained,  yet we are unable to enable the new session. Could you kindly suggest on how I can get this button to function?
    Additional inputs:
    - Referred to note 125814 for changing the new sessions value.
    - Tried changing the iview type to 'SAP GUI for window' from SAP HTML type(which was default).
    - In case I type '/o' in the command box for SAP, it gives me a 'maximum sessions reached' message, but this message does not come when I click on this button. In fact, nothing happens after I click on the button.
    I still think there might be a possibility to enable this, however, I seek your inputs on this.
    Awaiting response...
    Warm Regards,
    Vinay

    Hi Harini,
    thanks for your answer!
    I can tell you that the same command used from the SAP Client open a new session with the same transaction...
    Is strange that from the portal it has a different behaviour...
    Best Regards

  • Progress indicator icon does not appear in Sap Portal

    Hi experts.
    Currently, i Have developed a WD ABAP which contains a progress indicator icon. When I execute this WD from backend (R/3 via SE80) the Icon progress appears while the WD is recovering data, building structure, etc...
    The problem appears when I access to the scenary from SAP Portal, because from SAP Portal does not appear the Progress Icon. Someone can tell me why the icon is not appearing, and how Can i solve it???
    Thank in advance.
    Best regards

    Hi Thomas.
    First of all, thanks for your answer.
    My problem is that I can obtain a progress indicator icon (a circle moving) when I am inside of my Ivew, but I need to show this icon also in the first step, during the initialization. The initialization of my scenary is a hard process which spent a lot of time, and I wonder if is possible show a Process indicator Icon while all data are being recovery. This icon is showed when I run my webdynpro in the Backend, but this icon does not appears qhen the new Internet Explorer Windows is opened.
    Do you know how to show it???
    Thanks again.

  • Can't See com.sap.portal.runtime.logon in list of PAR Files in Iview Wizard

    Hello All,
    I am trying to create an iview from PAR file com.sap.portal.runtime.logon which is the logon par file that has the logon page. But when I right click a folder in the PCD and click on New From PAR Iview I try to find on the list of available par files and I don't find the one named com.sap.portal.runtime.logon
    Can anyone tell me if this has to do with the portalapp.xml file from com.sap.porta.runtime.logon.par file.? or with the Security Zones defined in portalapp.xml? Or does someone know why this PAR file doesn't appear on the list and how can I make it appear on this list of par files?
    Any helpful ideas to solve this issue will give rewarding points.
    Thanks
    Luis

    Hello,
    What I want to do is to put the logon page in the light framework page so that the users can login from the anonymous portal. After I customize the logon page I want to create aniview in the detailed navigation.
    If you want to see the jsp files that the com.sap.portal.runtime.logon.par file you have to go to the file system and copy the .par.bak file , rename it to .zip and all the files are there.
    But my question is if this is a par file that is deployed in the portal , why I cant create an iview from this par file? From other forums I have read they say that creating an iview from this par file it will put the logon page where you want. But when I try to create an iview from PAR File the com.sap.portal.runtime.logon doesn't appear in the list of available par files.
    Please help me on this and will give rewarding points.
    Thanks
    Luis

  • Timeout error in accessing CR 2008 with dynamic prompts from SAP Portal

    Hi
    We are using Business Objects XI 3.0 with Integration Kit for SAP
    Solutions on Windows 2003 Server with Weblogic 10.0 server.we have
    created a report (13 parameters) using Crystal Reports 2008 and
    deployed on the BOE.Crystal Reports are created using opensql driver
    and using tables.The prompts/parameters are created using Business
    views.After deploying the report under the database configuration under
    When viewing report the option selected is "Use SSO context for
    database logon".
    Later an iview is created on SAP Portal pointing to Crystal Report
    using Business Objects iview template.The SSO is working fine and we
    are able to select the parameters and when clicked ok we get an
    error.we have pasted the error below when we try to view source :
    <form action="../PlatformServices/service/app/error.do" method='post'>
    <input type='hidden' name="errMsg" value="A timeout error has occurred"><input type='hidden' name="loc" value="en_GB">
    <input type='hidden' name="pvl" value="en_GB">
    <input type='hidden' name="errStack"
    value="com.businessobjects.webutil.websessiontimeout.WebSessionTimeoutFilter.doFilter(WebSessionTimeoutFilter.java:142)
    weblogic.servlet.internal.FilterChainImpl.doFilter
    (FilterChainImpl.java:42)
    weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3368)
    weblogic.security.acl.internal.AuthenticatedSubject.doAs
    (AuthenticatedSubject.java:321)
    weblogic.security.service.SecurityManager.runAs
    (Lweblogic.security.acl.internal.AuthenticatedSubject;Lweblogic.security.acl.internal.AuthenticatedSubject;Ljava.security.PrivilegedAction;)
    Ljava.lang.Object;(Unknown Source)
    weblogic.servlet.internal.WebAppServletContext.securedExecute
    (WebAppServletContext.java:2117)
    weblogic.servlet.internal.WebAppServletContext.execute
    (WebAppServletContext.java:2023)
    Thanks
    Kamal

    Hello,
    1)How do I assign my user ID to the organisational unit? Please advise me step by step as I am new to SRMu2026
    2) Regarding error u201CThe following error text was processed in the system SR3 : Attribute for user USER18 contains errors. Inform system admin.
    The error occurred on the application server eccserver1_SR3_01 and in the work process 0 . u201C
    Using transaction SM21, I have discovered multiple errors for SAP instance eccserver1_SR3_01 like BBP_PU 245 transaction canceled, HTTP/RFC session has been deleted following timeout...
    3) How do I run report BBP_CHECK_CONSISTENCY? With transaction SE38? What do I choose next from the options available?
    This is too technical for me right now..maybe not in the future, but at this moment, I need more guidance...
    Thank you,
    Iuliana

  • Effect html code of sap portal

    Hi all
    Along with our web team I am looking into re-skining the SAP portal and was just wondering if there is a way of effecting the html code generated for each page of it. I know you can change the CSS tags, images via the theme editor etc but was wondering if it was possible to actually change the html code. i.e. have the ability to remove certain <table> tags or add new div tags and assign a class to them which could them be re-styled by adding aditional code to the CSS file. Basically the more that can be accessed the better so any help/advice in this area would be much appreciated.
    Regards
    Mart

    Hi,
    for more info about Tag Library read this: [Tag Libraries Tutorial |http://java.sun.com/products/jsp/tutorial/TagLibrariesTOC.html] and usage in portal this: [Layout Tag Library|http://help.sap.com/saphelp_nw2004s/helpdata/en/42/ea3a29b28e1bcae10000000a11466f/frameset.htm]
    Romano

Maybe you are looking for