News server not found!! news:comp.lang.java.programmer HELP

I trying to join newsgroup comp.lang.java.programmer
but keep getting news server not found.
Please help.

No it's the name of the news group. You may add news1.sinica.edu.tw as the news server and select the group from those listed.

Similar Messages

When I click on Mozilla Firefox I get server not found. When I ask for help I get server not found. Without my intention visual bee is in background.

I recently responded to a prompt to upgrade Mozilla Firefox and started seeing visual bee in background and got lookup for browser safeguard.com.com failed. Can't get into Firefox. My version is 3.6.12. Help requested. Thanks Keith

It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

No internet, "PPPoE Server Not Found" message. Same problem with both old and new modems.

Help please!
My internet connection with my old Westell 6100 modem was working fine, then quit all of the sudden and would not restart. The DSL and Data lights on the Westell modem were both green. The Internet light alternated between red and off.
I tried every troubleshooting thing I could think of:
Powering down and re-starting the modem and computer.
Resetting the modem.
Checking all of the wire and jack connections.
I plugged my computer ethernet cable straight into the modem, bypassing my router.
I tried both Windows and Mac computers.
I plugged the modem directly into the network interface on the outside of my house to bypass all of my house wiring.
I checked all my phone jacks with a telephone tester to make sure both phone lines were working and not reverse-wired.
I made sure I did not have a DSL filter installed on the modem line.
Verizon Tech Support did a line test and told me the line was fine but that there might be a problem with either my modem or something at the "central office" (not sure what that means). Verizon also sent me a new router as well -- a D-Link DSL-2750B.
The new D-Link router also does not connect to the internet (same problem). The DSL, Data, and Internet lights are all green on the D-Link. I have the computer directly connected to the modem with a new ethernet cable. I repeated the above troubleshooting steps. I went into the router configuration 192.168.1.1 and ran the modem's "Internet Troubleshooting" tests.
There were two error messages on the router configuration screens:
1."PPPoE Server not found" error message is shown on the summary screen.
2."No internet infrastructure present. Please call your infrastructure provider." is shown in the "internet troubleshooting" test results.
Verizon had me change some settings inside the router configuration -- no dice. Verizon ran another line test. A "Level 2 Tech" took over the call and told me that he thinks that the cause of the problem is that the outside wiring coming to my house is reverse-wired. How can this be true since my DSL worked for 2 years before this, my phone line tester indicates my phone lines are wired the right way, and my router reports "PPPoE Server Not Found?"
Verizon is sending out a repair tech to check the outside wiring but I don't think that is the problem at all.
HELP!
Solved!
Go to Solution.

If you're getting DSL sync (solid DSL light), this sounds like a case of a bad line card to me. I've seen it happen before where it wasn't an account or route issue to the network.
========
The first to bring me 1Gbps Fiber for $30/m wins!

New Domain Blocked..."Server not found"?

Hi Folks,
I was wondering if anyone could please shed some light on this question. I recently registered a new domain name and added a few files to that site address yesterday. I've tried going to the site on a few different friends macs & pcs and the site works and shows up great. This is not the case with my own computer. On my G4 all I get is a "server not found". My internet connection seams to be working fine as I can go to all my othere domains but just this one is not working...! I have a dsl connection through my phone line, and use a G4. I also tried with my little ibook and it did the same thing. I tried to use my ftp account to reach the domains files and I couldn't get to them either. What is blocking me from getting to that domain. I've checked with my hosting company and dsl service and no dice.
Please give me a hand here,
Todd
G4 Mac OS X (10.4.8) dsl qwest router,

I Can't believe it..this morning I tried the domain and it worked....
After all the reserch I did yesterday and didn't get anywhere, now it is working? I don't get it? I didn't change any setting on my system at all. I signed up with the hosting company a few days ago and understand if it takes a few days to register but then why could everyone else goto the domain on the internet yesterday while I was having issues...
Weird..
Thanks for all the suggestions, at least its working now.

Weblogic 6 Post Installation Problem - weblogic.Server not found

I reinstalled my recent downloads of the evaluation
copy of Weblogic 6.0 server three times on my NT 4.0 Service
pack 6 notebook computer. Installation works. However, I can't
start the server using the "startWebLogic.cmd". I get an error
that says that the class "weblogic.Server" is not
found -
Exception in thread "main" java.lang.NoClassDefFoundError: weblogic/Server
javap command cannot locate the class either.
My suspicion: weblogic .jar is corrupt.
Question: How do I get a new jar file? I have already
downloded the install files twice with no luck.
I have enclosed the command prompt messages.
[d:\bea\wlserver6.0\config\myadmindomain]setEnv
set WL_HOME=d:\bea\wlserver6.0
set JAVA_HOME=d:\bea\jdk130
set CLASSPATH=d:\bea\jdk130\lib\tools.jar;d:\bea\wlserver6.0\lib\weblogic_sp.jar
;d:\bea\wlserver6.0\lib\weblogic.jar;
set PATH=d:\bea\wlserver6.0\bin;d:\bea\jdk130\bin;c:\junk;C:\WINNT\SYSTEM32;C:\W
INNT;C:\MWW32\BIN;C:\MWW32\MODEM;D:\Program Files\Mts;.;D:\Microsoft Visual Stud
io\Common\MSDev98\Bin;D:\Microsoft Visual Studio\Common\IDE\IDE98;D:\Microsoft V
isual Studio\VB98;D:\Microsoft Visual Studio\VIntDev98\bin;D:\Microsoft Visual S
tudio\VC98\Bin;D:\Microsoft Visual Studio\Common\Tools;
Your environment has been set.
[d:\bea\wlserver6.0\config\myadmindomain]startWebLogic.cmd
set PATH=.\bin;d:\bea\wlserver6.0\bin;d:\bea\jdk130\bin;c:\junk;C:\WINNT\SYSTEM3
2;C:\WINNT;C:\MWW32\BIN;C:\MWW32\MODEM;D:\Program Files\Mts;.;D:\Microsoft Visua
l Studio\Common\MSDev98\Bin;D:\Microsoft Visual Studio\Common\IDE\IDE98;D:\Micro
soft Visual Studio\VB98;D:\Microsoft Visual Studio\VIntDev98\bin;D:\Microsoft Vi
sual Studio\VC98\Bin;D:\Microsoft Visual Studio\Common\Tools;
set CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar
"d:\bea\jdk130\bin\java" -hotspot -ms64m -mx64m -classpath .;.\lib\weblogic_sp.j
ar;.\lib\weblogic.jar -Dweblogic.Domain=myAdminDomain -Dweblogic.Name=myserver "
-Dbea.home=d:\bea" "-Djava.security.policy==d:\bea\wlserver6.0/lib/weblogic.poli
cy" -Dweblogic.management.password= weblogic.Server
Exception in thread "main" java.lang.NoClassDefFoundError: weblogic/Server
goto finish
cd config\myAdminDomain
ENDLOCAL
[d:\bea\wlserver6.0\config\myadmindomain]javap weblogic.Server
Class 'weblogic.Server' not found

It looks like your startWebLogic.cmd script has problems with the class
path. You should doublecheck that.
Thanks,
Michael
Michael Girdley
BEA Systems
Learning WebLogic? http://learnweblogic.com
"Bindu Rao" <[email protected]> wrote in message
news:[email protected]...
>
I reinstalled my recent downloads of the evaluation
copy of Weblogic 6.0 server three times on my NT 4.0 Service
pack 6 notebook computer. Installation works. However, I can't
start the server using the "startWebLogic.cmd". I get an error
that says that the class "weblogic.Server" is not
found -
Exception in thread "main" java.lang.NoClassDefFoundError: weblogic/Server
javap command cannot locate the class either.
My suspicion: weblogic .jar is corrupt.
Question: How do I get a new jar file? I have already
downloded the install files twice with no luck.
I have enclosed the command prompt messages.
[d:\bea\wlserver6.0\config\myadmindomain]setEnv
set WL_HOME=d:\bea\wlserver6.0
set JAVA_HOME=d:\bea\jdk130
setCLASSPATH=d:\bea\jdk130\lib\tools.jar;d:\bea\wlserver6.0\lib\weblogic_sp.jar
;d:\bea\wlserver6.0\lib\weblogic.jar;
setPATH=d:\bea\wlserver6.0\bin;d:\bea\jdk130\bin;c:\junk;C:\WINNT\SYSTEM32;C:\W
INNT;C:\MWW32\BIN;C:\MWW32\MODEM;D:\Program Files\Mts;.;D:\MicrosoftVisual Stud
io\Common\MSDev98\Bin;D:\Microsoft VisualStudio\Common\IDE\IDE98;D:\Microsoft V
isual Studio\VB98;D:\Microsoft Visual Studio\VIntDev98\bin;D:\MicrosoftVisual S
tudio\VC98\Bin;D:\Microsoft Visual Studio\Common\Tools;
Your environment has been set.
[d:\bea\wlserver6.0\config\myadmindomain]startWebLogic.cmd
setPATH=.\bin;d:\bea\wlserver6.0\bin;d:\bea\jdk130\bin;c:\junk;C:\WINNT\SYSTEM3
2;C:\WINNT;C:\MWW32\BIN;C:\MWW32\MODEM;D:\Program Files\Mts;.;D:\MicrosoftVisua
l Studio\Common\MSDev98\Bin;D:\Microsoft VisualStudio\Common\IDE\IDE98;D:\Micro
soft Visual Studio\VB98;D:\Microsoft VisualStudio\VIntDev98\bin;D:\Microsoft Vi
sual Studio\VC98\Bin;D:\Microsoft Visual Studio\Common\Tools;
set CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar
"d:\bea\jdk130\bin\java" -hotspot -ms64m -mx64m -classpath.;.\lib\weblogic_sp.j
>
ar;.\lib\weblogic.jar -Dweblogic.Domain=myAdminDomain -Dweblogic.Name=myserv
er "
-Dbea.home=d:\bea""-Djava.security.policy==d:\bea\wlserver6.0/lib/weblogic.poli
cy" -Dweblogic.management.password= weblogic.Server
Exception in thread "main" java.lang.NoClassDefFoundError: weblogic/Server
goto finish
cd config\myAdminDomain
ENDLOCAL
[d:\bea\wlserver6.0\config\myadmindomain]javap weblogic.Server
Class 'weblogic.Server' not found

Server not found in Kerberos database (7)

Hi!
Running the examples from
http://java.sun.com/javase/6/docs/technotes/guides/security/jgss/lab
works fine for me as long as I use the Kerberos test realm I have set up on a unix machine. But when I run the same classes against our Active Directory, the client spills a stacktrace, indicating that AD can not find the server in its database. But it actually is in that database, as the sample server can perfectly authenticate as exactly that principal!
Enabling all security related debug info i could find, this is the client dump:
$ java -Djava.security.auth.login.config=jaas-krb5.conf
 -Djava.security.krb5.kdc=##KDC##
 -Djava.security.krb5.realm=##REALM##
 -Dsun.security.jgss.debug=true
 -Dsun.security.krb5.debug=true
 -Djava.security.debug="logincontext,policy,scl,gssloginconfig"
 GssClient host ##SERVER##
scl: getPermissions ProtectionDomain (file:/xxxxx/ <no signer certificates>)
sun.misc.Launcher$AppClassLoader@11b86e7
<no principals>
java.security.Permissions@1a46e30 (
(java.io.FilePermission \xxxxx\- read)
(java.lang.RuntimePermission exitVM)
scl:
Debug is true storeKey false useTicketCache true useKeyTab true doNotPrompt false ticketCache is nu
ll isInitiator true KeyTab is null refreshKrb5Config is false principal is xxxxx tryFirstPass is tru
e useFirstPass is false storePass is false clearPass is false
Acquire TGT from Cache
KinitOptions cache name is C:\xxxxxAcquire default native Credentials
Obtained TGT from LSA: Credentials:
client=##USER##@##REALM##
server=krbtgt/##REALM##@##REALM##
authTime=20070705103930Z
startTime=20070705103930Z
endTime=20070705203930Z
renewTill=20070712103930Z
flags: FORWARDABLE;RENEWABLE;INITIAL;PRE-AUTHENT
EType (int): 23
Principal is ##USER##@##REALM##
 [Krb5LoginModule] authentication succeeded
 [LoginContext]: login success
Commit Succeeded
 [LoginContext]: commit success
Authenticated principal: [##USER##@##REALM##]
Connected to address ##SERVER##/xxxxx
xxxxx
create server name with host@##SERVER##
Search Subject for Kerberos V5 INIT cred (<<DEF>>, sun.security.jgss.krb5.Krb5InitCredential)
Found ticket for ##USER##@##REALM## to go to krbtgt/##REALM##@##REALM## expiring on Thu Jul
05 20:39:30 GMT 2007
Entered Krb5Context.initSecContext with state=STATE_NEW
Found ticket for ##USER##@##REALM## to go to krbtgt/##REALM##@##REALM## expiring on Thu Jul
05 20:39:30 GMT 2007
Service ticket not found in the subject
Credentials acquireServiceCreds: same realmUsing builtin default etypes for default_tgs_enctypes
default etypes for default_tgs_enctypes: 3 1 23 16 17.
CksumType: sun.security.krb5.internal.crypto.RsaMd5CksumType
EType: sun.security.krb5.internal.crypto.ArcFourHmacEType
KrbKdcReq send: kdc=##KDC## UDP:88, timeout=30000, number of retries =3, #bytes=1328
KDCCommunication: kdc=##KDC## UDP:88, timeout=30000,Attempt =1, #bytes=1328
KrbKdcReq send: #bytes read=101
KrbKdcReq send: #bytes read=101
KDCRep: init() encoding tag is 126 req type is 13
KRBError: sTime is Thu Jul 05 14:43:05 GMT 2007 1183646585000
 suSec is 487997
 error code is 7
 error Message is Server not found in Kerberos database
 realm is ##REALM##
 sname is host/##SERVER##
 msgType is 30
KrbException: Server not found in Kerberos database (7)
 at sun.security.krb5.KrbTgsRep.<init>(Unknown Source)
 at sun.security.krb5.KrbTgsReq.getReply(Unknown Source)
 at sun.security.krb5.internal.CredentialsUtil.serviceCreds(Unknown Source)
 at sun.security.krb5.internal.CredentialsUtil.acquireServiceCreds(Unknown Source)
 at sun.security.krb5.Credentials.acquireServiceCreds(Unknown Source)
 at sun.security.jgss.krb5.Krb5Context.initSecContext(Unknown Source)
 at sun.security.jgss.GSSContextImpl.initSecContext(Unknown Source)
 at sun.security.jgss.GSSContextImpl.initSecContext(Unknown Source)
 at GssClient$GssClientAction.run(GssClient.java:171)
 at java.security.AccessController.doPrivileged(Native Method)
 at javax.security.auth.Subject.doAs(Unknown Source)
 at Jaas.loginAndAction(Jaas.java:94)
 at GssClient.main(GssClient.java:97)
Caused by: KrbException: Identifier doesn't match expected value (906)
 at sun.security.krb5.internal.KDCRep.init(Unknown Source)
 at sun.security.krb5.internal.TGSRep.init(Unknown Source)
 at sun.security.krb5.internal.TGSRep.<init>(Unknown Source)
 ... 13 more
Exception in thread "main" java.security.PrivilegedActionException: GSSException: No valid credentia
ls provided (Mechanism level: Server not found in Kerberos database (7))
 at java.security.AccessController.doPrivileged(Native Method)
 at javax.security.auth.Subject.doAs(Unknown Source)
 at Jaas.loginAndAction(Jaas.java:94)
 at GssClient.main(GssClient.java:97)
Caused by: GSSException: No valid credentials provided (Mechanism level: Server not found in Kerbero
s database (7))
 at sun.security.jgss.krb5.Krb5Context.initSecContext(Unknown Source)
 at sun.security.jgss.GSSContextImpl.initSecContext(Unknown Source)
 at sun.security.jgss.GSSContextImpl.initSecContext(Unknown Source)
 at GssClient$GssClientAction.run(GssClient.java:171)
 ... 4 more
Caused by: KrbException: Server not found in Kerberos database (7)
 at sun.security.krb5.KrbTgsRep.<init>(Unknown Source)
 at sun.security.krb5.KrbTgsReq.getReply(Unknown Source)
 at sun.security.krb5.internal.CredentialsUtil.serviceCreds(Unknown Source)
 at sun.security.krb5.internal.CredentialsUtil.acquireServiceCreds(Unknown Source)
 at sun.security.krb5.Credentials.acquireServiceCreds(Unknown Source)
 ... 8 more
Caused by: KrbException: Identifier doesn't match expected value (906)
 at sun.security.krb5.internal.KDCRep.init(Unknown Source)
 at sun.security.krb5.internal.TGSRep.init(Unknown Source)
 at sun.security.krb5.internal.TGSRep.<init>(Unknown Source)
 ... 13 moreWhy's AD claiming in the KRBError that it can't find a sname/realm which exactly matches the principal it accepted for the server? This totally confuses me! Can please anyone bring some light?
Regards

It works now!!!
The exact procedure is:
- Create a new user in AD with an arbitrary name <username>. Use the same name in "User Logon Name", "User Logon Name (pre Win2K)" and "First Name" (odd, isn't it).
- Set the password, deactivate "User has to change the password at first logon", and activate "Password never expires"
- Create a mapping for the service name by entering into the command line: ktpass -princ "<protocol>/<fqdn>@<realm>" -mapuser "<username>@<realm>" -pass "*" -out dummy.keytab
- Check that the mapping is set and unique; use adsiedit.msc (Windows Support Tools).
- Now you can use the Java tool ktab to create your own keytab as usual and go.
But it is a science in its own right to correctly configure an Active Directory , especially for use with Kerberos. In particular error messages are hardly useful (as it is generally the case in the Kerberos world). It may help to read:
http://www.microsoft.com/downloads/details.aspx?FamilyID=99b0f94f-e28a-4726-bffe-2f64ae2f59a2&DisplayLang=en
and
http://www.microsoft.com/downloads/details.aspx?FamilyID=7dfeb015-6043-47db-8238-dc7af89c93f1&displaylang=en
Have fun!

Firefox 4 on Mac goes through periods of time where it brings "server not found" or "problem loading page" pages. I have to re-start firefox to get it to work again. Works fine on Safari.

Hi, ever since I was prompted to download the new Firefox 4, I have continuously been having this issue. I will type in a domain name and it will automatically prompt me to "server not found". The websites work fine on Safari and Google Chrome, but not firefox. I have uninstalled and reinstalled firefox about 4 times and I really need a solution!
Also, I have done all of the IPv4, Cache, and other solutions listed in the article on having certain sites not load. I'd appreciate some help! Thanks!

Did you ever fix this, because I am having the same problem

Error "kdc: Server not found in database" on attempted connections using Network User Credentials

I am rebuilding my system after a recent debacle with Time Machine, which resulted in a complete wiping of my Open Directory contents. At this point, users can log into various computers on the network, when the hosts have been reconnected to the newly formed Open Directory and the trust certificate has been authorized. However, when users attempt to connect to any file share, the Network User Account credentials fail to gain access.
I am running Mac OS X 10.9.4 on all systems. Two mac-mini's are running OS X Server 3.1.2. One of these servers (mavericks1.pediatricheartcenter.org) is the Open Directory. While testing the system, I am using the console on "Mavericks1," so the following discussion involves communication between the two server hosts only.
From Mavericks1, I open the console and attempt to connect to my file server, named fileserver.pediatricheartcenter.org. I clear the console just prior to sending a "registered user" request to "FileServer" to gain access. Careful examination of the console records shows the following:
1. The Network User is authorized with a message "ENC-TS pre-authentication succeeded".
2. Mavericks1 lists a console message that reads "kdc: Server not found in database: krbtgt/[email protected]:no such entry found in hdb"
3. Mavericks1 lists a console message that reads "kdc: Server not found in database: cifs/[email protected]: no such entry found in hdb"
4. The process registers what appears to be a final failure before trying again with "kdc: Failed building TGS-REP to 127.0.0.1:64390"
FileStorage.local does not exist in the DNS, nor does it exist on FileStorage.pediatricheartcenter.org. That (local) host name was removed when the domain host name for filestorage.pediatricheartcenter.org was created.
1. Why does the kerberos process reference a host name that does not exist?
2. What might be causing the failed authentication exchange?
3. What can be done to remedy the issue?

I spent some time on the phone with Apple Support on Friday. Thank you to Linc Davis for providing some insights into the issues.
As a result of the conversation with Apple Support we learned the following, which I will report here for those who might find this page again:
First, OpenDirectories are extremely fragile. Once you have turned on your OpenDirectory, do not do any of the following:
Do NOT change the host name.
Do NOT change the IP address.
If you are going to attempt either of these things, you should make a clone of your drive (not just a TimeMachine backup, a fully bootable clone, just in case).
Performing these activities (particularly the changing of the host name) will "break" your open directory, and the only way to rebuild the open directory is first to fully destroy the original. Several services are also destroyed when OpenDirectory is broken, the most notable is Profile Manager.
DESTROYING OPEN DIRECTORY
To fully destroy OpenDirectory, it is more complex than simply turning off the OpenDirectory and turning it back on again. Perform the following steps:
Install WorkGroup Manager (it is depricated, but Apple still has a version available for use with OS X Mavericks to handle functions that the Server App does not perform like exporting users and groups).
Sign into WorkGroup Manager as the directory administrator (user name defaults to "diradmin" the password is defined on OpenDirectory creation).
Export the Users, Groups, Computers and Computer Groups to the Desktop or another safe location.
Close WorkGroup Manager
Turn off the OpenDirectory in Server App.
Delete the Server App from the Applications folder and put it in the Trash. (This will disable any active services that are marking various files as being currently in use. Don't worry, we will restore it from the Trash when we are done).
In the terminal, run the following command: sudo slapconfig -destroyldapserver
Make a backup of all website files (just in case)
Navigate to the folder /Library/Server and delete the ProfileManager folder. (If you willing to do so, delete the whole Server folder).
After deleting various folders in the /Library/Server directory, restore the Server.app from the Trash.
Run the Server App.
Set the computer's network connection and host name.
Create a new OpenDirectory.
Use WorkGroup Manager to import any exported files from Step 3.
If you deleted the entire Server directory, use the website backup to retrieve the files that comprise your web site(s) and use the Server App to link the file directories to the Web site's domain name(s).
Personal Note: These instructions got me farther than any other tips I had received previously. After following these instructions, I was able to rebuild my Open Directory. During the process of copying files from the old user home folders into the new user home folders, the computer froze and when it rebooted, all the users and groups I had created during the day had disappeared. Rather than trouble-shooting it again, I decided to do a fresh installation.
A NOTE ON HOME FOLDERS
PER APPLE SUPPORT: Do NOT use the default /Users directory for Network users. Apple Support wanted me to rebuild the home directory, but they noted I was not able to do this, because I had used /Users. This folder ("/Users") is a critical component of the OS X system, and will cause additional problems if the folder is destroyed and rebuilt. The directory id and permissions must remain unchanged from the original installation.
For this reason, Server administrators (like yourself) should use File Sharing in the Server App to create a new anchor point for home directories. Create a shared folder. Ensure that it is shared over the protocols that you will be using (AFP, SMB, WebDav), and then after selecting these values, check the box that allows the folder to be used as a home directory at the bottom of this list. This box will be greyed out if the system is not already bound to an OpenDirectory. If you have activated OpenDirectory on the same machine, the machine will operate as if bound to itself, and this field will be active. If the FileShare server is NOT an OpenDirectory master or replica, then bind the machine to an OpenDirectory via the "System Preferences > Users & Groups > Login Options".
If the local area network has FileShares that are enabled for home directory use, the folders will appear in the User Profile editor under the Home Folder list (See image)
In the screenshot above, I have selected a shared directory named "HomeFolders". By using specially defined home folder directory, the server administrator has the option of deleting and modifying the home folder if necessary. Creating a home folder directory in a location other than "/Users" is the recommended best practice by Apple Support.
If you are inserting files into the home folders, you will need to change the owner and the group to the new owners names. I copied files from the old user directories into the new user directories so that the users would have access to their old files. When my OpenDirectory crashed, and all the users were recreated, they were recreated with different system level user id's. The system therefore maintains a memory that the file was owned by the original owner, even though the system administrator has put it in the new user profile's folder. To fix this, do the following:
1. Prior to making the copy, run "ls -al" from the terminal on the new home directory root. You are looking for the default folder owner and default folder group. On my system it was the user name and a group named "staff".
2. When making the copy, do not replace the user folder. Copy the files into the file folder, not over it.
3. After you have moved files into the user's folders, you can use "sudo chown -R [owner]:[group] [homeFolderPath]/*" and "sudo chmod -R 700 [homeFolderPath]/*" (replace the [owner] and [group] portions of these commands with the owners and groups identified by the command in step 1, and replace [homeFolderPath] with a path to the user directory created for the specific user.
For example:
For the user johnnybgood, we might see the following:
1. We run "ls -al" on the newly created home folder and find that the folder /Volumes/HomeFolders/johnnybgood is owned by johnnybgood and the group "staff".
2. We copy or move files from the old locations using commands similar to the following:
       sudo mv /OldFolderLocation/johnnybgood/Documents/* /Volumes/HomeFolders/johnnybgood/Documents
       sudo mv /OldFolderLocation/johnnybgood/Desktop/* /Volumes/HomeFolders/johnnybgood/Desktop
       sudo mv /OldFolderLocation/johnnybgood/Music/* /Volumes/HomeFolders/johnnybgood/Music
       ....etc....
       (notice how we are not just moving the old johnnybgood folder to the new location.)
3. Next, we change the ownership and file permissions:
       sudo chown -R johnnybgood:staff /Volumes/HomeFolders/johnnybgood/Documents
       sudo chown -R johnnybgood:staff /Volumes/HomeFolders/johnnybgood/Desktop
       sudo chown -R johnnybgood:staff /Volumes/HomeFolders/johnnybgood/Music
       ...etc...
       sudo chmod -R 700 /Volumes/HomeFolders/johnnybgood/Documents
       sudo chmod -R 700 /Volumes/HomeFolders/johnnybgood/Desktop
       sudo chmod -R 700 /Volumes/HomeFolders/johnnybgood/Music
       ...etc...
4. Let the user log in and use the system normally.

"Dispatcher running, server not found" After installing temporary license

hi all,
we have Xi server at stack 03. As the licence expired, we requested for temporay license from SAP Marketplace and updated the same using Visual admin tool. The new expiry date was reflected in the visual admin tool. But once we restrted the WAS, we are unable to log into the visual admin.
"requested object was not found".
when used the url " http://localhost:50000" , it says
" dispatcher runing, server not found"
If anyone has faced simiplar problems, please let us know with some solution.
Regards,
Siva Maranani.

Your server is not running.
Check two things:
1)run jcmon pf=/usr/sap/..../<instance_profile_here
select 20 and then list process to see what is running.
You should see dispatcher, server and SDM running.
In your case the server will show 0 pid.
2) go to the /usr/sap...../j2ee/cluster/server/log/console_logs (I think this is the path....and then look at the latest error logs....
This should give you an idea why the server is not running...
Hope this helps,
John Ryan

Server Not Found - php in CS5.5 'Live Code' Issues

Hi
I'm new to this Forum, so hello to one and all.
I have just started to learn php and was lead to believe that CS5.5 would be able to let me see what was happening when I place a new bit of php in the Live View. However, all I get is an error code saying the following:
Server Not Found
The page "http://ftp.sharkdesigns.co.uk/public_html/php.php" was not loaded because Dreamweaver could not find the server "ftp.sharkdesigns.co.uk". Please make sure you are connected to the internet and the server name is correct.
Not being a computer buff I have no idea why this should be happening, since I have built my web site on the CS4 version without any issues.
I have learned some HTML, CSS etc. by sheer trial and error, since the books I have assume that you know what you’re talking about to be able to read what they are talking about, but nobody explained what they are talking about when they talk about the stuff that you need to know … Confused? Join my world, because I’m so confused that I have lost track of everything I have learned and don’t know where to look in the hope that an answer will materialise. The problem is that I don’t use the special terms that are so common in this industry often enough to remember what they actually mean for more than a few minutes, so when I try to learn something new, I have to start all over again as if I didn’t know anything at all. By way of added frustration, I also don’t know what to ask or how to ask for it because I don’t know that it is there to be asked for in the first place (example: - if you can’t spell the word ‘One’, and there is no one else to ask how it is spelled, how do you look it up in a dictionary unless you can already spell it?).
The problem I have is that if it works I can use it, but if it doesn’t work you need a Masters degree to get it to work to use it, which I don’t, and there is just on one to ask what is going wrong. So unless you know what to ask and how to ask for it, which I don’t, you just have an error message that stumps you before you have even started.
I know that this is a lot of rambling, but I just need my system to work so that I can lean a little php to make my web site run better, and there is no one I know who can help.
Can anyone help?

Mark Shark Designs wrote:
Hi
I'm new to this Forum, so hello to one and all.
I have just started to learn php and was lead to believe that CS5.5 would be able to let me see what was happening when I place a new bit of php in the Live View. However, all I get is an error code saying the following:
If you have just started to learn php then you will want to set up a local server testing environment to test your pages rather than keep uploading the files to your remote and checking them out, which seems a bit backwards to me if your'e going to be using php a lot.
For PC:
http://www.webassist.com/support/documentation/how-tos/xampp_for_windows.php
For Mac:
http://www.webassist.com/support/documentation/how-tos/mamp_for_mac.php

"problem loading"; "unable to connect"; "server not found" - ??

Been using Firefox 6 years with DSl. Recently have gotten nothing but the above messages - can't open any pages! Got a new DSL modem, re-downloaded Firefox and still can't open any pages - not even mozilla.com or google or cnn.
Rebooted, restarted, etc.
Even tried to download Chrome, but it failed - and I couldn't find out why because the "tell me why" defaulted to Firefox.
... really no fan of IE ...

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
See also:
*http://kb.mozillazine.org/Error_loading_websites
You can try to reset (power off/on) the router.
Another possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

Server not found when switching from 4g to wifi and vice versa.

I've had this issue for a while across multiple phones and multiple versions of Firefox for Android, and it does not happen with any other browser (which is upsetting). Whenever I am surfing the web and have multiple tabs open, and I switch from 4g to wifi or vice versa, I always get a "Server not found" error on both existing tabs and new tabs. This is an annoying issue that I am surprised to see hasn't been fixed. The only way I've been able to fix it is to quit and relaunch the app. I have tried removing plug-ins and reinstalling, but it has not helped.
Anything I could do to alleviate the issue?
LG G2 and Samsung Galaxy Note 3. Both on Android 4.4.2
Firefox for Android Ver. 35.0.1

''Roland Tanglao [[#answer-698502|said]]''
<blockquote>
Hi scruffy90:
You wrote "LG G2 and Samsung Galaxy Note 3. Both on Android 4.4.2 Firefox for Android Ver. 35.0.1 "
I just tried switching between HSPA+ aka 3G and WiFi on a Galaxy S5 running Android 5 and have had no issues but I think this may have been an issue in the past (I did a search for a bug in bugzilla.mozilla.org but couldn't find anything).
Are there any other details you could provide that could help us debug?
e.g.
# Are you using a proxy?
# Who is your WiFi provider?
# Have you tried other WiFi (e.g. the Wifi both at home and work)
Cheers!
...Roland
</blockquote>
Hello Roland,
No proxy on the phone or wi-fi network.
My ISP is Time Warner, but I supply my own router (Linksys e4200)
And this happens on every wi-fi network, at home and away from home.

How do I fix a very slow Firefox browser often resulting in "Server Not Found"?

The browser is super slow, saying 'problem loading page' and ends up showing the 'Server not found' message. Eventually I'm able to access a website after highlighting the website address and hitting enter, maybe several times. My computer is new and have made minimal changes until this problem is resolved. Problem affects e-mail, too.

I think this is not a Firefox's bug/error.
This is I think generated from the back-end SQL syntax of the site, which means the site created this error message, not Firefox.
You may contact the site-owner and tell them about this error message, so they may know & fix this error.

Constantly keep getting error 404, server not found

Very frequently I keep getting the error message 404, server not found. This problem mainly comes up after I have been on the computer for a while, and I leave the web site that I'm viewing on for some time. I then return to the computer some time later, and when I try to refresh the page to update the info on the page (example: a weather site or yahoo stock market info) I keep getting, 404 server not found. When I try the option: try again, it does nothing to solve the constant problem. The only way I can get back to the web site and see updated info is to start firefox in safe mode. And, that does solve the problem. But why does this problem keep constantly occurring. And, why do I have to constantly have to restart firefox in safe mode to get going again. It would seem firefox should recognize this issue and solve it. I'm using what I believe to be the latest version, 15. Can someone shed some light on this issue? I did not have this problem with my older computer and an old version of firefox, version 3.6. But, since getting a new computer and using a new version of firefox, version 15, this problem constantly appears. Can some one help? Thank you.

Which security software (firewall, anti-virus) do you have?
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
Do a malware check with some malware scanning programs on the Windows computer. 
You need to scan with all programs because each program detects different malware.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*http://support.kaspersky.com/viruses/solutions?qid=208280684
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

When trying to open firefox I always get "server not found".

After downloading Firefox I cannot get it to connect to the internet. I always get the message "server not found." I have tried all the "fixes" suggested online but without any luck. This is a new download and I have not used Firefox before now.

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls

News server not found!! news:comp.lang.java.programmer HELP

Similar Messages

Maybe you are looking for