Next "Find" result not in the centre of the window

After upgraded to 14.0.1, I find the next search result (either by "alt + N" or "ctrl+G", no longer appear in the center of the window. This feature in version 13 was very helpful for me. It allows me to have my eyes concentrating on the center of the screen, where the next search result would show up. Please recover the feature!!

If subsequent results are on the same window then the page isn't scrolled to center the result, but merely the next result gets highlighted to prevent confusion.
*Bug 720126 - Find in Page: always centering highlighted result makes it hard to see relative positions of multiple results
*Bug 171237 - Find in Page: highlighted result should be at the middle of the page (vertically centered) instead of last line/bottom of page

Similar Messages

  • Apple logo in the centre of the screen and not responding

    I received my Apple TV yesterday, it was fairly easy to set up, I had it working with sync'd and streamed content.
    This morning I switch on my TV and find the Apple logo in the centre of the screen, but it's not responding to the remote other than the fact that the white LED goes off when I hold down the buttons on the remote. (an amber LED does not show).

    try unplugging and plugging it back in.

  • My Finder is not opening, it keep given the message "Finder app can't open anymore.

    My Finder is not opening, it keep given the message "Finder app can't open anymore. This was after an upgrade from Yosemite 10.10.1 to 10.10.2. Below are reports from my console
    2/7/15 13:11:13.337 Finder[206]: plugin com.getdropbox.dropbox.garcon interrupted
    2/10/15 15:10:20.697 Finder[3559]: assertion failed: 14C109: libxpc.dylib + 97940 [876216DC-D5D3-381E-8AF9-49AE464E5107]: 0x87
    2/10/15 15:10:22.657 Finder[3559]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.backupd.status.xpc
    Process:               Finder [205]
    Path:                  /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
    Identifier:            com.apple.finder
    Build Info:            Finder_FE-932001003000000~1
    Responsible:           Finder [205]
    7   com.apple.finder               0x000000010389276e 0x1036ba000 + 1935214
    8   com.apple.finder               0x0000000103963171 0x1036ba000 + 2789745
    12  com.apple.finder               0x0000000103962664 0x1036ba000 + 2786916
    14  com.apple.finder               0x000000010388f7b4 0x1036ba000 + 1922996
    18  com.apple.finder               0x0000000103889168 0x1036ba000 + 1896808
    32  com.apple.finder               0x00000001036bf960 0x1036ba000 + 22880
           0x1036ba000 -        0x103ba8ffb  com.apple.finder (10.10.1 - 10.10.1) <33C3024A-4A16-3485-B2B1-89FA33B9558A> /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder

    First, quit "Dropbox" and see whether there's an improvement.
    Finder crashes are often caused by "Google Drive." If it's installed, I suggest you first check for an update. If that doesn't solve the problem, remove it according to the developer's instructions. You may need to start the computer in safe mode to do so. Back up all data before making any changes.
    If you use Google Drive and don't want to remove it, then try deselecting the option in its preferences to "show status icons." According to reports, that may be enough to stop the crashing.
    Similar cloud-data clients such as "Dolly Drive," "iDrive," "Open Drive," "Transporter Desktop," and others can cause the same problem.

  • HT4061 Please can you help. My ipad is frozen. A box is permently on in the centre of the screen saying not enought storage. When i press on c e or settings it doesn't respond. It won't slide to unlock. Any suggestions ?

    Please can you help.  My ipad is frozen. A box is permently on in the centre of the screen saying not enought storage.  When i press on the words CLOSE or SETTINGS it doesn't respond.  It won't slide to unlock or close down. The ipad is 16GB and about a year old.  Any suggestions.
    Annmarie

    THis suggestion also worked for my iphone! After a few warnings, the screen on my iPhone froze. there was no way to make phone calls or manage my iCloud storage or even turn it off. I deleted all the photos on my iphone, checked storage and nothing changed. So I purchased more storage, did the backup and still the screen remained frozen. To be sure, I checked that the new amount of storage was registered, it was but somehow my Mac showed the backup I had just performed (a couple of times) not having happened (it show the last one some 2 weeks before). Weird but I followed your suggestion  (wish I had seen it before I purchased new storage) and Ta DAH!!! I'm back in business too. thanks!!

  • My zeen does not boot up and it just shows the HP logon in the centre of the screen (HP C510a)

    MY zeen seemed to be locked up as I could not do anything with it.  Powered it off and now when I power it up it just shows a HP logon in the centre of the screen.

    Insert your Install DVD.
    Boot whilst holding down the C key.
    Select your language.
    Go to Utilities > Disk Utility > Repair Disk + Repair Permissions

  • My Firefox does not show the scroll bar and the search is not in the centre of the screen

    Firefox does not show the scroll bar and search is not in the centre of the screen
    Hope you can help
    Regards
    Waheed

    CTRL + B

  • My key board is coming in the centre of the screen. I could not see what I am writing. What to do?

    My keyboard is coming on the centre of the screen so I can't see what I am typing.

    Tap and hold the little keyboard icon in the bottom right corner and select "Dock"

  • How to make a circle and a line ending (at the centre of the circle) lock and move together?

    I'm new to Illustrator and perhaps it's not the best software of CS6 Master for doing this, but:
    I have a few (13) circles, they are connected with lines (one line from the centre of a circle to the centre of the next one, so 13 connecting lines). I need to move the circles around in order to create the appearance that suits me best, but I want the connecting ending to move together (see picture below). I need to do this often and get an immediate visual feedback. How do I do it? Am I using the wrong software altogether?
    Thanks in advance to all who will try and help out!

    Here's a way of doing it with the Appearance panel and multiple fills converted to an ellipse.
    1 You create your path with all the segmentts you require can be an open or closed path.
    2. Convert the fill only to an Ellipse. Effect>Convert to Shape>Ellipse (use the Absolute option and give it the dimension you want the circle to be) (cn cahnge this at anytime in the future as well as the color of the circles)
    3. Using the Effect>Distort and Transform>Transform move the circle fill to a position corresponding to an anchor of the path as to position the circle with the nchor as the center.
    4. In the Appearance panel Option (Alt) drag the fill with the convert to ellipse and the transform down or up to duplicate it, or se the flyout of the Appearance panel to duplicte the fill.
    (do this for each circle you need) You will only have to adjust the transformation vertical and horizontal positions, Bith effects will be duplicated when you copy the fill so you only adjust the transformeffecct that is already associated with the fill.
    Like this:

  • I too had the same vertical white line in the centre of the screen last night after having my iPhone 5 up and running for 10 days. I managed to turn it off by holding the buttons in and it came up with the iTunes screen....2 hours later it came good?

    I was talking outside on my iPhone 5 in a fairly humid environment (The Pilbara in January, 2014) then when the call was finished I hung up (as I was walking back inside to the air-conditioning) this white vertical line appeared in the centre of the screen and wouldn't go away. I couldn't use it NOR could I accept calls. (I called my number from my other phone). I eventually managed to turn it off after removing the protective casing (Otter Box) and then it came up with the white cord / iTunes screen........I left it for a while...it turned back on BUT is still had a flickering screen.......I re-charged it and I have backed it up this morning (at work) on iTunes and it seems to be working 'fine.' All I can say is 'DO NOT GET RID OF YOUR SAMSUNG GALAXY PHONE IF YOU HAVE ONE!' I haven't had an OUNCE of trouble with it and have owned it for at least 3 years. The iPhone has been up and 'running' since the 6th of January, 2014. This happened on the 15th of January, 2014.

    Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
    Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
    Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off.

  • Every time I create a button it moves to the centre of the page when outputing to pdf

    every time I create a button it moves to the centre of the page when outputting to pdf
    I have done a load of tests and it does it every time
    I imported a jpg image as my button. Converted it to a button by Interactive/convert button. Even before I setup all the options in the buttons panel it moves. So for instance I have the button in the bottom RHS in Indesign. Then make a interactive pdf and its in the centre of the page. I have even converted the image back to an object and it goes back to in proper position.
    I have tried this in several documents, starting from scratch and using different images and also drawn a button. I have also used the buttons from the button library
    In previous version of Indesign I have never uncounted this problem.
    2 weeks later to above post
    Can anyone help this has not be resolved and I have several annual reports to get out urgently. Its happening to all documents!

    every time I create a button it moves to the centre of the page when outputting to pdf
    I have done a load of tests and it does it every time
    I imported a jpg image as my button. Converted it to a button by Interactive/convert button. Even before I setup all the options in the buttons panel it moves. So for instance I have the button in the bottom RHS in Indesign. Then make a interactive pdf and its in the centre of the page. I have even converted the image back to an object and it goes back to in proper position.
    I have tried this in several documents, starting from scratch and using different images and also drawn a button. I have also used the buttons from the button library
    In previous version of Indesign I have never uncounted this problem.
    2 weeks later to above post
    Can anyone help this has not be resolved and I have several annual reports to get out urgently. Its happening to all documents!

  • When I turn on my iPad the grey 'brightness slider' is in the centre of the screen and I can't get rid of it. I've tried switching on / off 'auto-brightness' in 'settings' but it won't go away. What am I doing wrong? Any advice gratefully received.

    When I turn on my iPad the grey 'brightness slider' is in the centre of the screen and I can't get rid of it. I've tried switching on / off 'auto-brightness' in 'settings' but it won't go away. What am I doing wrong? Any advice gratefully received.

    That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
    Put your install DVD into the optical drive (CD/DVD drive) and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
    When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
    If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
    If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

  • Ipad is frozen, after sliding the log off bar the screen is grey and a small circular icon is spinning in the centre of the screen.

    My Ipad has been freezing up.  I just tried to log off and after sliding the log off bar the screen is grey and there is a small circular icon spinning in the centre of the screen.  Over half an hour now.  Has anyone run into this before?

    Try and hole the home button and power off button at the same time until the iPad shuts off,do not let to of either button until you see the Apple appear in the screen. This will reset your iPad without loosing anything and try power off with the slide bar again after you complete the steps.
    Hope this helps.

  • I've just changed computers and now some websites (mainly facebook) only appear in the centre of the screen with a white band either side.

    Since changing my computer some web pages are only showing text, picture etc down the centre of the screen, this one included. Increasing the text size with zoom or changing to full screen do not resolve the problem. A better explanation might be that text does not fill the screen right to left there is a wide margin either side.

    Hi
    Thanks for the reply, I have tried all these steps and it doesn't solve the problem. I don't know whether I am explaining it properly. It's not making the sites illegible it's just really annoying. The site content is only displayed down the middle of the screen with the first quarter and last quarter being blank, I fear it may be one of those things I have to live with. It's just weird because I have never had this before on my old computer. It won't let me add a screen shot which would probably make it clear what I mean.
    Thanks again

  • I recently updated Firefox and when I did the screen displays the sites in the centre of the screen and in very small text. I have a newer monitor with a wide screen. How do I go about fixing this problem?

    I have a new computer with a wide screen. Before I updated the web sites would fit the width of the screen, now that I've updated the web sites only display in the centre of the screen and they appear squished.

    I'm using iOS 7.04 on my iPhone and basically can't use it. The screen is going crazy. I type and special characters show up. I have to hit send more than once (it grays out, then hit again) then it sends. I type words in text or email and it backspaces and deletes my entire message. I tap an application and it starts wiggling to delete. I've reboot several times. I'm looking at restoring, but that is a pain in the arse (it's my work phone). I'm nervous it will not restore properly.
    I have iOS 7.03 on iPad and have no issues.

  • How do I list bookmarks in the centre of the screen below the bookmarks button

    when I click on the bookmarks icon it opens the bookmarks menu on the left-hand side of the screen but I want to be able to just list the bookmarks in the centre of the screen underneath the bookmarks icon.
    I used to be able to do this but since resetting Firefox I have not been able to.

    thanks for your answer, after trying o solve this for hours I posted the question and of course solved it myself 30 seconds later!

Maybe you are looking for