Next message/previous message - how to? new user
I'm new to Macs. So far I like it.
When reading an email message, can I click forward or backward through the messages in that folder? I don't see this option/feature.
I see "delete", "junk", "reply", "reply all", "forward", "print". I'm looking for something like "next message" and "previous message", so I can just click forward and backward through the inbox.
Thanks
- Ryan
Hello Ryan.
You can use keyboard shortcuts to take pictures of the screen in Mac OS X.
To take a picture of the whole screen, press Command-Shift-3.
To take a picture of part of the screen, press Command-Shift-4, then drag to select the area you want in the picture.
To take a picture of a window, the menu bar, the Dock, or other area, press Command-Shift-4, then press the Space bar. Move the pointer over the area you want so that it's highlighted, then click. If you decide you want to drag to select the area, press the Space bar again.
If you press Command-Shift-4 and decide you don't want to take the screen shot, press the Escape key.
Screen shots are saved as files on the desktop. If you want to put the screen shot in the Clipboard, rather than create a file, hold down the Control key when you press the other keys. You can then paste the picture into a document.
You can use the Grab application to take a picture of all or part of your computer screen.
Open Grab (located in /Applications/Utilities) and choose a command from the Capture menu.
Selection takes a picture of a part of the screen that you select.
Window takes a picture of a window you select.
Screen takes a picture of the entire screen.
Timed Screen lets you start a timer and activate part of the screen (such as a menu), and then takes a picture of the screen.
Follow the onscreen instructions.
To see information about a screen shot you've taken, such as the size and depth, choose Edit > Inspector.
To save a screen shot, choose File > Save. Grab saves screen shots as files in TIFF format. You can use the Preview application to view these files and export them to other formats, such as JPEG.
Similar Messages
-
Error Message When Adding New User
Hello,
We are on FDM 11.1.2.1.501 and today as I was going to add a new user in the system I got the below error message:
Error: Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index
After the error the usual user maintenance screen came up and I was able to add the users I needed to without any problems. Anyone have an idea what this error means? Just looking to prevent problems on down the road.
Also, there wasn't anything in the FDM error log nor in the windows event viewer on any of the servers.
Thanks in advance,
JasonOracle was able to provide a solution to this one. Somehow there was a disconnect between HSS and FDM so went into SS and deleted out the affected application. Then went onto the FDM web server and ran the user migration utility to reconnect that application with SS and now it works fine w/out the error message.
-
How create new user in sql developer?
so i tried creating a new user in SQL developer, under the worksheet section, for a 12c database
create user Hares1
identified by book;
but I get this error
SQL Error: ORA-65096: invalid common user or role name
Sorry I know this is a generalized question. I only learned how to actually connect today - any help of a next step would be appreciated.so i tried creating a new user in SQL developer, under the worksheet section, for a 12c database
create user Hares1
identified by book;
but I get this error
SQL Error: ORA-65096: invalid common user or role name
The 'next step' is RTFM. Sorry but for 12c multitenant you simply MUST read the documentation about the new multitenant architecture.
Your 'problem' is not creating a user with sql developer - it is how to create users in 12c.
See my extended comments and reply in this thread (and several other threads I reference there) which addresses your exact problem
12c: ORA-65049: creation of local user or role is not allowed in CDB$ROOT
http://www.oracle.com/pls/db121/homepage
I suggest you first read chapters 17 and 18 of the Concepts doc about the new multitenant architecture of 12c.
http://docs.oracle.com/cd/E16655_01/server.121/e17633/part_consol.htm#CHDGDBHJ
The 'Common Users in a CDB section answers your question
>
The name of every user-created common user must begin with the characters c## or C##. (Oracle-supplied common user names do not have this restriction.)
>
There are two types of users in 12c: common and local. You need to understand the difference between them.
Until you read those doc chapters you won't understand these terms: common user, local user, CDB, PDB, root container, and many others.
As I said in that other thread:
You will NOT be successful working with 12c unless you have read and understand the new multitenant architecture that it uses. There are very simple things (connecting, startup/shutdown, creation of users, grants to users, etc) that just don't work the same old way anymore.
If you try to just 'plow through it' without reading about it you will likely get an exception that you won't understand and it will likely use a term (CDB$ROOT) that you won't understand. Then you will hunt all over (or worse, ask in the forums) to find out about that term.
Yes - I know how adverse some people are to RTFM replies. But for 12c multitenant it is mandatory to read the docs no matter how expert you may be in previous Oracle versions. -
Restrict message size - Message Size Restrictions - New Users
Is there a way to set the message size restrictions on new mailboxes(programmatically)? I saw maybe it can be done with a mailbox plan but this doesn't seem to be a feature on exchange 2013 enterprise(internally hosted)?
Any ideas welcome
Thanks
RobbieHi ,
Please have a look in to the below mentioned command.
Set-Mailbox -Identity "nithya" -MaxSendSize "10 MB" -MaxReceiveSize "10 MB"
For bulk user's modification:
import-csv c:\nithya.csv | Set-Mailbox -MaxSendSize "10 MB" -MaxReceiveSize "10 MB"
CSV header image :
Reference link :
http://exchangeshare.wordpress.com/2008/04/24/exchange-2007-where-to-set-message-mail-size-limit/
http://rajisubramanian.wordpress.com/2014/01/26/exchange-server-2013-message-size-configuration-detail/
Note : First link is for exchange 2007 though the concept is same for exchange 2013.
Thanks & Regards S.Nithyanandham -
Placing an initial message in new user's account on Messaging Server
How can I get the Messaging Server to place an initial message in a new user's
account?
<P>
Create a message and place it in a file on the server. If the file does
not exist, create it with a text editor like vi, emacs, or notepad.
<P>
On Unix: /netscape/suitespot/bin/mail/server/etc/greeting.txt <BR>
On Windows NT: C:\Netscape\Suitespot\bin\mail\server\etc\greeting.txtNikolai,
If that isn't it, then the Alias is not any form of esa.
Discussions is not case sensitive.
If a Topic was started, do you remember it's title, or contents?
Try this;
Delete the browser's Apple Cookies, and clear the browser Cache.
On the Discussions Sign In Page, do not enter any info in the text fields.
Instead, under "Did you forget your password?", click on "Click here for assistance".
On the page that opens, click on "Forget your Apple ID?".
Enter the required info, and click Continue.
ali b -
Next and previous buttons, Cluster, Image Ring problem
Hello, I'm a pretty new user, and I need help with this excercise:
"Create an application in LabVIEW to manage the information of different cars from the movie Fast and Furious. The goal is to show in a Graphic User Interface the information of the cars included in the following table:
ID
Name
Model
Brand
Price
1
Eclipse
2000
Mitsubishi
$ 25,550.89
2 RX-7 2010 Mazda $ 32,700.50
3
Supra
2000
Toyota
$ 39,450.30
4 Charger 2012 Dodge $ 45,290.99
5
Civic
2013
Honda
$ 27,600.40
6 S2000 2006 Honda $ 29,500.99
7
Jetta
2013
Volkswagen
$ 21,740.90
The type of data that should be shown in each field is presented in the following list:
ID Integer
Name String
Model Integer
Brand String
Price Float
Write a program that shows the information of every car included in the table. file Fast_Furious.vi as a starting point to write your code.
Specifications
The following image shows an example of the User Interface of the program:
You can download the
The user should see the information of 7 different cars using the buttons Next and Previous. Each time the user press these buttons the information of the previous or next car should be presented on the interface. There are two special cases in the selection of information:
If the information of the first car (Eclipse) is shown and the user makes clic over the button Previous. The information of the last car (Jetta) must be shown.
If the information of the last car (Jetta) is shown and the user makes clic over the button Next. The information of the first car (Eclipse) must be shown.
You must use the array of clusters to obtain and manage the information of the cars, and the ring to show the photos of the cars.
Finally, include a close button to stop the execution of the program.
Extra: Add sound effects to your program. Each time the user makes click over the Previous or Next
button a beep sound should be produced."
I especially need help with the next and previous buttons and the sounds. I alredy have all the information, and the app is supposed to look like the picture attached.
Thanks,
Attachments:
Test.png 769 KBActually, Munna I think I smell a homework project (2nd year of college, maybe?)
So Miguel, what have you got done so far? What does your code look look like?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps -
New users Email not verfied. 550 error
Hi everyone,
Very new to servers and am in this position because our IT guy quit and we had to add new users. I added them and everything else works except they can not send or recieve emails. It bounces back, organization rejected.. 550 verification failed 550 no such
user here. After adding them in SBS is there another step to verify their email?
Thank you,Hi:
That error is from the receiving server informing you that there is no such user at the other end. Have someone at the target company send a message to your new user and then have them reply to that message.
Larry Struckmeyer[SBS-MVP] If your question is answered, please mark the response as the answer so that others can benefit. -
Error message when attempting to back up iPod to iTunes, no number given. No previous back ups as a new user, current iTunes software and iPod iOS.
The issue you are experiencing is with installing the latest iTunes update. I recommend following the steps below:
Resolution
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
I understand that you have already uninstalled iTunes, but when you get to this step, it is important to uninstall iTunes and the related components in the order listed in the link for that step. -
How do I get to the NEXT or PREVIOUS message in my mailbox when reading mai
I know this may sound stupid, but unless I am missing something here, I cannot find a way to scroll down (or up) to messages when I am reading my mail. I have to close the message I am presently reading to reveal the full inbox and then select the next (or previous) mail message. I have been running OSX in all of its incarnations/updates and have never seen this sort of upgrade or feature to Mail (presently running 2.0.5). It is not an option either with an icon or in any pulldown menu. I can certainly do it in Outlook and AOL, but no MacMail.
what gives? (and my apologies if this has already been beaten to death on this board)
thanks
Theo ([email protected])
Studio City, CAWith my large monitor, this is not a problem, but also having an iBook, I understand your question.
With my iBook, my method would be to look at the message in the message preview pane, and then double-click from the list to open it up in a separate window. In this fashion, F9 to invoke Expose, will let you toggle between both (or more) windows.
To transfer from the full screen view, click on Message in the Menubar, and choose Move To or Copy To from the resulting contextual menu, and then choose the target mailbox. Or toggle to the other mail window, select one or more messages in the message list, and control-click or right-click and choose Move To or Copy To and select the target mailbox. I find this much more useful (and less prone to mistakes) than drag and drop.
Ernie -
when trying to delete a message in mail, i would prefer to advance to the next message. i delete a message and the curser goes back to an earlier message. i usually delete the most recent messages first.
First of all, you've posted in the Snow Leopard forum, but your profile says you're running Leopard, not Snow Leopard. What version of Mac OS X are you really running? You should always be sure that your profile matches the forum you're posting in, otherwise the "solution" to your problem may be totally ineffective.
Part of your problem is that deleting Mail messages depends on how you have them ordered. If they are listed in Descending Date order (most recent at the top), and you want to delete a series of consecutive emails from an earlier time, you should select the last one in that group and press the Delete key; with each one that's deleted, the selection will move to the next one up the list. You could also select the first one in the group, then Shift-click on the last one in the group and press Delete to get rid of them in one step.
If you have them listed in Date Ascending order (most recent at the bottom), you would have to select the oldest message(s) you want to delete and select it (or them) and press the Delete key, and the selection would move down the list to the next most recent message in the window. -
IMAC Email - Moving to Next or Previous Message
I am a new iMAC and iPhone user, and am using Apple Mail on both devices.
On my iPhone, after I view 1 particular message, I have the option to hit an "UP" or "DOWN" arrow, to move to the NEXT or PREVIOUS email message to view. However on the iMAC, when I view a Mail Message in Full Screen mode, I can't seem to find a way to move to the NEXT or PREVIOUS email message, unless I close down the current message, and then open the next message. I can easily scroll thru multiple messages when using the "preview panel" to view the contents of a single email, below the list of items in my Inbox, however some longer emails are better read full-screen, but is there a way to move to the NEXT or PREVIOUS message when viewing full-screen.....If it is a good feature for the iPhone, then I would suspect it should be a good feature for the iMAC as well.
Does anyone know if this is possible and what keystroke or shortcut might allow this, if there isn't a button on the toolbar to support this?
Thanks,
grantmacuser61With my large monitor, this is not a problem, but also having an iBook, I understand your question.
With my iBook, my method would be to look at the message in the message preview pane, and then double-click from the list to open it up in a separate window. In this fashion, F9 to invoke Expose, will let you toggle between both (or more) windows.
To transfer from the full screen view, click on Message in the Menubar, and choose Move To or Copy To from the resulting contextual menu, and then choose the target mailbox. Or toggle to the other mail window, select one or more messages in the message list, and control-click or right-click and choose Move To or Copy To and select the target mailbox. I find this much more useful (and less prone to mistakes) than drag and drop.
Ernie -
How can I sync my iPad 2 with my new MacBook Pro when it is already synced with my old MacBook? I am getting a message on the new MacBook Pro that says I am not allowed to sync the iPad 2 because it is synced to another iTunes library.
1) ensure iTunes is authorized for your iTunes store account(s)
2) connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
3) sync the device
iTunes will wipe the iPad but, since you transferred your purchases in the previous step, your content will be in your library and you can re-populate the iPad with it.
above works for purchases from the iTunes store. for everything else, check out this post by Zevoneer.
also, there are PhoneView and iRip. -
How can I stop mail on iPad from going to next message when deleting an email?
How can I stop the mail app from moving to the next message when deleting an email?
I like to keep messages as new until I can take action on them, but this just makes an unnecessary step. I do not have this problem on my iPhone, but I am still running 5.0.1 on the phone and have the new iPad 5.1 software.Hi furiousbalancing,
With regards to deleting messages in Mail, you may find the following portion of the following article helpful:
To prevent the next message from being automatically selected (and marked as read), hold down the Option key when you delete a message.
Mail (Mavericks): Delete messages
http://support.apple.com/kb/PH14900
You can also use Command-Shift-U to toggle a message between Read and Unread (command should be the same in Mavericks):
Mail (Mountain Lion): Keyboard shortcuts
http://support.apple.com/kb/PH11679
You can also close the Preview portion of the Mail window, which should then require you to double-click on a message to open it and have it show as read (it appears the double click on the seperator may no longer work in Mavericks, but you should still be able to drag it to make it disappear):
Mac OS X Mail: How to show or hide the preview pane or mailboxes drawer
http://support.apple.com/kb/HT2583
Regards,
- Brenden -
How to Create Support Message with no SolMan User
Hi all,
I would like to test if it is possible to create a support message from ECC system, if the same user do not have a SolMan user.
Now, in few other threads, like
Creation of support message in SolMan without having user id in SolMan
Re: Do End User Require Login in Solman to raise Support Messages !!
show to the user there support message list
e.t.c.
it is clearly stated: it is possible.
I have done the next steps:
In ECC:
- created a test user
- assighned him a "sap_all" profile (and "Z_SAP_SV_FDB_NOTIF_BC_CREATE" role) + user comparasion
- assighned him a "Z_SAP_S_RFCACL" role + user comparasion
In Solman:
- No user created
- In TX DNO_CUST04 the Field Name "NO_USER_CHECK" is maintained with the value "X".
- In tx BP business partner is created as a general BP, with valid external SYS ID no (other users with both ECC and SM user are OK), and changed to "employee" with ECC username defined.
Now, the problem is when I try to create a support message as a test user in ECC, I get an error:
"Error in Local Message System: No authorization to logon as trusted system (Trust Message was Not Created"
All I could find is the tread:
solution maanger issue
and this one is basicly different:
the mentioned user has both ECC and SM user.
And one of the answers was the user must have S_RFCACL roles in BOTH ECC ans SM systems...
In ST22 (in solman) I get error description:
" An RFC call (Remote Function Call) was sent with the invalid user ID
"TEST_T01230 "
. Or the calling system is not registered as trusted system in the
target system."
Now, the calling system IS regged as a trusted sys (as I mantioned - other users with both ECC and SM users can send supp. msgs)
So - the only answer is "invalid user ID".
The short message is
" No authorization to logon as trusted system (Trusted RC=0)"
and the trusted return codes ( 0 ) have the following meaning: Invalid logon data (user ID and client) for the trusting system.
So. how can I perform trusted Logon with no user in SM?
Thank you in advance,
cheers
NenadHi again,
thank you for your help.
At first I thought you meant *_back dest. directly in SM, and now I see you ment to use SMSY to go to ECC sys, and maintain the RFC conns on ECC diredtly from SMSY, "clean-up RFC Destinations". Yes, can do
So:
The problem is solved.
I deleted the *_back user from ECC to SM, and re-generated the connection with default system pre-defined user SMB_T01. (it is interesting that SU01 reports - user SMB_T01 does not exist)
I even deleted a SRFCACL role from the test user in ECC, and the user was still able to create the support message (certanly he was, as he uses a *:back rfc with SMB_T01to log on to SM)
So, resume:
To be able to create / send a support message from another system, with no user in SolMan, it is needed:
- a user in other system with roles needed for everyday work, + "Z_SAP_SV_FDB_NOTIF_BC_CREATE" role;
- a not trusted SM_<SID>CLNT<CLNT_NB>_BACK rfc connection from satelite system to SolMan, with defined logon user (with apropriate authorisations) - generated by the system.
- the BCOS_CUST table in ECC system should be onfigured like: OSS_MSG W SM_<SID>CLNT<CLNT_NB>_BACK CUST 620 1.0
- a Business Partner for user in SM with identification number for system from where the massege will be sent from. (the user can send the note with out this condition, but the "created by" field in message will be empty in that case)
Once again thank you,
cheers,
Nenad
Case closed.
Edited by: Nenad nikolic on Mar 23, 2010 10:54 AM
Edited by: Nenad nikolic on Mar 23, 2010 10:57 AM -
Photoshop Elements 11 installed on Mac Mini OS X 10.9.5. Application running successfully on bot main user and administrative accounts for considerable time with no warning messages. When established a new user account on same computer and try to call up elements receive message “Some ot the application components are missing from the Application directory. Please reinstall the application.” How do I correct this problem without disturbing application in main user account?
Brooks lansing if you create a new Administrator account does the same issue occur? If so then it is likely that there is a file permission failure and file permissions have been set for the existing Users instead of the groups they belong to.
Have you removed and reinstalled Photoshop Elements 11? This may reset the file permissions to the correct state to allow it to work under new accounts.
Maybe you are looking for
-
A serious problem with flush 11.3 on Windows XP! Forgive assistance.../Серьёзная проблема с флешем..
Я вчера поставил и обнаружил проблему со звуком.(если смотреть видео с звуком(разумеется) или слушать муз через инет(браузер(вообщем где задействован хоть как то флеф-плеер) звук какой то с разрывами(слушать не возможно).... Это как и в флеше для та
-
Is there a way to create a comma delimited file using the GUI_Download. Its keeps coming out tab delimited. Thanks
-
Trying to change country but keep getting "You have at least one incomplete pass. Passes must be completed before you change stores" How do i complete passes
-
Saved project opens blank - Captivate 7
I've been working on a few projects and some of them open up blank, the filmstrip shows there is content on the slide but there is none on the main window, I have to click each individual object in the timeline for it to show on the screen again. Sav
-
Metadata Panel in Bridge - Greyed Out - what did I do?
I am using CS2 and the metadata panel (view - Metadata panel) is greyed out. What can I do to make it active? Thanks very much. Joanne