Next Page does not contain data

Hi My comp. is using JETFORMS. when i try to take printout of PO then its giving only 4 line items in output instead of 11 line items.
Even I have check the Spool its contain 11 line items. I checked JETFORMS script but not able to find out solution. Pl reply ASAP.

Is there no next page in the form design? Does 4 rows fill the main window in the first page?

Similar Messages

Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching.

Hello all,
I am using the IMAQ Match Pattern 4 to detect the rotation angle of a template image. However, it shows the error: "Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching." What is the problem exactly? How to solve this? The details are explained below.
My project is a little bit complicated. Part of the block diagram containing the IMAQ Match Pattern 4 is shown below:
The source image is a series of frames of images read from an AVI video (I used a for loop to process the images frame by frame). The template image is a selected region of the first frame. So it means, the user selected the object of ineterst in the first frame of the video, and in each of the following frames, we need to find the matched object of interest & determine its rotation angle. When I run the block diagram shown above, it does not have any error. However, it shows the rotation angle as zero no matter what it "really" is. Therefore, I changed the block diagram by adding the parameters, shown below:
But in this case, when I run it, it shows the error that I have indicated in the subject line.
If you need more details about my project to identify the problem, please let me know.
Thanks in advance.
Solved!
Go to Solution.

-Please go through pattern matching example which comes along with labview fiirst
Go to labview Help>>Find Examples and you can search for example.
-You have create template with angle range and what type of pattern matching you want use.
-For this you have to use IMAQ Learn Pattern before using IMAQ Match Pattern 4
Refer :http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

Page does not show data

Hi all,
I would appreciate any help for the following problem that I am facing.
I have created master-detail pages sharing the same AM.
The details page shows details of the request from 3 different VOs.
The VOs are entity-based and I modify the VOs using the setwhereclause for my purpose.
The master page runs fine and shows the searched request but when I goto the details page, it renders correctly but does not show any data.
Thanks in advance.

Hi,
Thanks for the reply.
The view instance and view attribute to the details page columns are already set.
To add to the information,the AM is also used by othe pages for logic calcuation.
After executing these pages for one of the request, when I use ther master detail page for ther same request, it works.
But for the other requests, the details page does not return any data.
I suppose this is linked with EO not getting updated/refreshed with the new search request in the master details page.
If this is supposedly the reason,then how can I refresh the EO for each master detail search?
Has anybody encountered this issue before?
--Riyaz
Edited by: mriyaz on Mar 7, 2009 12:29 PM

CSCus46899 - Bridge Utilization page does not show data

Found out to be working with google chrome....

Hi,
Thanks for the reply.
The view instance and view attribute to the details page columns are already set.
To add to the information,the AM is also used by othe pages for logic calcuation.
After executing these pages for one of the request, when I use ther master detail page for ther same request, it works.
But for the other requests, the details page does not return any data.
I suppose this is linked with EO not getting updated/refreshed with the new search request in the master details page.
If this is supposedly the reason,then how can I refresh the EO for each master detail search?
Has anybody encountered this issue before?
--Riyaz
Edited by: mriyaz on Mar 7, 2009 12:29 PM

How to avoid printing a page if does not contain data in smart forms

deat all,
here is urgent requirement for me .
i have 3 pagelayouts in smartforms.
if there is no data in page 2 how to avoid it from printing(the second page should not come in even if it contains hedings and logo)

try like this
if@section:IND=1
this template
end ifsectionbreak
if@section:IND=2
this template
end if

MDT 0xc0000098 The windows boot configuration data file does not contain a valid OS entry

hello,
i installed WDS+MDT for OS deployment. all was working fine.
Now i need our branch office to be able to deploy OS as well.
I installed a new Win 2008R2 server, and installed the WDS service on it.
When reading about this on the internet i saw i need, on the MDT at our main office, to make a link, under "Advanced Configuration" - "Linked Deployment Shares" to the new WDS server (I used this: http://www.balm.se/?p=115")
when doing so i entered the UNC path to the new server and then, on the created link, i right click and choose "Replicate now".
after doing so, i tried booting a laptop just to see if there is any impact, and now, I'm getting this error:
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. insert your windows installation disk and restart your computer
2. choose your language, and then click "Next"
3. Click "Repair your computer"
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: \Boot\BCD
Status: 0xc0000098
Info: The windows Boot Configuration Data file does not contain a valid OS entry.
I know that usually when I'm getting this message, it means that a previous MDT installation was started and did not finished correctly, and the are some [stuff] on the HD, so i do a partition erase and start over and all working fine.
Now it's not working. I tried several computer, even new ones, and NADA.
someone know the cause?
I know I read something, i don't remember where or how to find it, that when doing the steps I did, it alter\change some ini or xml, or something like this. is that true? any one know on what file do i need to look and see if something is misconfigured?
thanks a lot for your help

hello,
i installed WDS+MDT for OS deployment. all was working fine.
Now i need our branch office to be able to deploy OS as well.
I installed a new Win 2008R2 server, and installed the WDS service on it.
When reading about this on the internet i saw i need, on the MDT at our main office, to make a link, under "Advanced Configuration" - "Linked Deployment Shares" to the new WDS server (I used this: http://www.balm.se/?p=115")
when doing so i entered the UNC path to the new server and then, on the created link, i right click and choose "Replicate now".
after doing so, i tried booting a laptop just to see if there is any impact, and now, I'm getting this error:
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. insert your windows installation disk and restart your computer
2. choose your language, and then click "Next"
3. Click "Repair your computer"
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: \Boot\BCD
Status: 0xc0000098
Info: The windows Boot Configuration Data file does not contain a valid OS entry.
I know that usually when I'm getting this message, it means that a previous MDT installation was started and did not finished correctly, and the are some [stuff] on the HD, so i do a partition erase and start over and all working fine.
Now it's not working. I tried several computer, even new ones, and NADA.
someone know the cause?
I know I read something, i don't remember where or how to find it, that when doing the steps I did, it alter\change some ini or xml, or something like this. is that true? any one know on what file do i need to look and see if something is misconfigured?
thanks a lot for your help
For a branch solution I would use DFS(R) rather than linked deploymentshares.
If there is infrastructure at the remote sites you could use the MDT environment at your main site, and then at each other site use an existing server or build a new server (VM is available). Create a Deploymentshare on each sever
and copy the contents of the MDT environment from the first site into this share. Next you will have to add the WDS service to each site's server. For WDS add the boot image. Of course as Keith noted ensure that you
have the same versions of MDT and the WAIK/ADK on all systems
You can use DFS to replicate to all of the other sites, but you will still have to create a deploymentshare, and install WDS at each site. So each site talks to its own WDS server you can use the DefaultGateway parameter instead -
[Settings]
Priority=Default, DefaultGateway
[Default]
SkipBDDWelcome=YES
[DefaultGateway]
192.168.10.1=Bergen
192.168.20.1=Oslo
[Bergen]
DeployRoot=\\MDT-Bergen\DeploymentShare$
[Oslo]
DeployRoot=\\MDT-Oslo\DeploymentShare$
If this post is helpful please click "Mark for answer", thanks! Kind regards

The Downloaded PDF file does not contain the Signature through BSP pages

HI,
We have an requirement for Distributing the FORM 16 to all Employee's through our Website, where the user will login and download his own FORM 16 ( TDS Certificate)
This FORM 16 ( TDS Certificate ) is generated in SAP ( ECC 6.0 ) in Payroll Module.
To satisfy the above requirement we have done the following steps.
1) First we have modified the standards SAP Sapscript(Layout) to incorporate the Signature of Authorised Payroll Person.
We have done this by uploading the BMP file ( though t-code SE78 ) and then calling this file in the Standards layout which prints the FORM 16 document.
2) WE also Modifed the Dirver program to Download the above document in a .PDF file.
The Program creates the seperate file for each employee and assigns the employee number as a file name to each downloaded file. These all files are downloaded on a Users Machine.
We opened the Downloaded .PDF files, and checked for the Signatures. The Signature were comming perfect as it ws uploaded.
3) We uploaded these all FORM 16 PDF file off all emlpoyee's to a different SERVER ( BW 7.0 ). With the help of BASIS person, using the FTP utility.
4) We wrote a BSP program to download this ulploaded PDF Files.
BUT we are facing a PROBLEM in the DOWNLOADED PDF file.
The Downloaded file does not contain the Signature which is there is the Original file we uploded this server.
All other data in the dowloaded PDF file is Perfect other than the Signature.
When we open the downlaoded PDF file it give's following message on the Signautre page.
" Xobject not found named 00013"
The number of the Object comes different to different files.
We are using Function module 'SCMS_STRING_TO_XSTRING' to Convert string to Xstring
We are using the the " CALL METHOD CL_BSP_UTILITY=>DOWNLOAD" for downloading the PDF file.
Please suggest some solution if you can
Thanks in advnace.
Re
GAGAN

HI,
We have an requirement for Distributing the FORM 16 to all Employee's through our Website, where the user will login and download his own FORM 16 ( TDS Certificate)
This FORM 16 ( TDS Certificate ) is generated in SAP ( ECC 6.0 ) in Payroll Module.
To satisfy the above requirement we have done the following steps.
1) First we have modified the standards SAP Sapscript(Layout) to incorporate the Signature of Authorised Payroll Person.
We have done this by uploading the BMP file ( though t-code SE78 ) and then calling this file in the Standards layout which prints the FORM 16 document.
2) WE also Modifed the Dirver program to Download the above document in a .PDF file.
The Program creates the seperate file for each employee and assigns the employee number as a file name to each downloaded file. These all files are downloaded on a Users Machine.
We opened the Downloaded .PDF files, and checked for the Signatures. The Signature were comming perfect as it ws uploaded.
3) We uploaded these all FORM 16 PDF file off all emlpoyee's to a different SERVER ( BW 7.0 ). With the help of BASIS person, using the FTP utility.
4) We wrote a BSP program to download this ulploaded PDF Files.
BUT we are facing a PROBLEM in the DOWNLOADED PDF file.
The Downloaded file does not contain the Signature which is there is the Original file we uploded this server.
All other data in the dowloaded PDF file is Perfect other than the Signature.
When we open the downlaoded PDF file it give's following message on the Signautre page.
" Xobject not found named 00013"
The number of the Object comes different to different files.
We are using Function module 'SCMS_STRING_TO_XSTRING' to Convert string to Xstring
We are using the the " CALL METHOD CL_BSP_UTILITY=>DOWNLOAD" for downloading the PDF file.
Please suggest some solution if you can
Thanks in advnace.
Re
GAGAN

Error msg after scan "ADF does not contain any pages"

HP office jet 6600 has worked well for months, but recently 3 out of 5 times that I tried to scan from the ADF, whether one page or many, the scanner runs through its cycle and then gives me the following error: “The scanner automatic document feeder (ADF) does not contain any pages. Insert the pages to be scanned into the ADF and try again.”
Sometimes I just run it again and it works. I'm using HP scan that came with the 6600 download full driver package; running Windows 7 64-bit. I use the scanner significantly and it has operated perfectly for over a year and I haven't changed anything that I know of.Appreciate any help that somebody can give me… I have cleaned rulers and "flicked the little white thing", and some of the other things that were mentioned for similar problems.

Hello I would be happy to help you with the automatic document feeder (ADF) issue you are having with the Officejet 6600. Even though it's a different issue this document has several steps you can try; Vertical Bands, Lines, or Streaks in Copies, Faxes, or Scans. I've copied the applicable steps here for you. Clean the scanner glass and scanner lid If the scanner glass or the white underside of the lid has fingerprints, smudges, lint, dust, or other debris, this can slow performance and affect copy and scan quality. To resolve this issue, clean the product.Before you begin, gather the following materials:Several clean, soft, lint-free clothsMild glass cleaner
CAUTION:Use only glass cleaner to clean the scanner glass. Do not use cleaners that contain abrasives, acetone, benzene, or carbon tetrachloride. These substances can damage the product. Avoid isopropyl alcohol (rubbing alcohol) because it can leave streaks on the glass.Press the Power button () to turn off the product.Disconnect the power cord from the rear of the product.Lift the scanner lid.
Figure : Lift the scanner lid
Spray a clean, soft, lint-free cloth with mild glass cleaner.
CAUTION:To protect the scanner, do not spray the glass cleaner directly on the glass.Clean the scanner glass, and the glass strip next to the scanner glass, with the lint-free cloth.
Figure : Clean the scanner glass and the glass strip
Clean the white underside of the scanner lid.
Figure : The underside of the scanner lid
Dry the scanner glass and the glass strip thoroughly with a clean, dry cloth or chamois to prevent spotting, and then dry the white underside of the scanner lid.
NOTE:Do not use paper-based wipes or tissues that can leave fiber residue.Close the scanner lid.Reconnect the power cord to the rear of the product.If the product does not turn on by itself, press the Power button () to turn it on.Try to copy, fax, or scan again.If these steps resolved the issue, you do not need to continue troubleshooting.If the issue persists, continue to the next solution.
Clean the automatic document feeder (ADF)
Follow these steps to clean the automatic document feeder (ADF), and then make blank copies to check if the issue is resolved.Step one: Clean the ADF rollers and separator padFollow these steps to clean the automatic document feeder (ADF).Gather the following materials:A clean, lint-free cloth, or any cloth that will not come apart or leave fibersDistilled, filtered, or bottled water (tap water might damage the product)Remove any originals from the document feeder tray.
Figure : Remove any originalsPress the Power button () to turn off the product.Disconnect the power cord from the rear of the product.Lift the cover of the ADF until it stops.
Figure : Lift the ADF cover
Locate the pick rollers and the separator pad.
Figure : Locations of the pick rollers and the separator pad
The ADF coverThe pick rollersThe separator padLightly dampen a clean lint-free cloth with distilled or bottled water, and then squeeze any excess liquid from the cloth.Use the damp cloth to wipe any residue off of the separator pad.
Figure : The separator pad
Use the damp cloth to wipe any residue off of the pick rollers.
Figure :
Dry the rollers and the separator pad with a clean, dry, lint-free cloth.Do not close the ADF cover. Continue to the next step to clean the glass strip in the automatic document feeder.
Clean the glass strip in the automatic document feeder
Follow these steps to clean the glass strip underneath the mechanism in the automatic document feeder (ADF).
NOTE:The images in this step might not be of your product, but the steps are the same.If you have not done so already, disconnect the power cord from the rear of the product.Remove any originals from the document feeder tray.
Figure : Remove any originals
Open the ADF cover, and then lift the ADF mechanism.
Figure : Lift the ADF mechanism
Lightly dampen a clean, soft, lint-free cloth with a mild glass cleaner.Gently clean the glass strip inside the ADF, and then thoroughly dry it to prevent spotting.
Figure : Clean the glass strip
Lower the ADF mechanism back into place, and then close the ADF cover.Step three: Make a blank copy using the scannerFollow these steps to make a blank copy using the scanner.Lift the scanner lid.Figure : Lift the scanner lidRemove any originals from the scanner glass.Close the scanner lid.Load unused, plain white paper into the input tray.From the home screen on the product control panel, touch Copy ().Touch Start Black to start the copy.If the copy is clean, continue to the next step to make a copy using the ADF.If the copy has vertical bands, lines, or streaks, there might be dust inside the product, poor internal connections, or the product might be damaged. Please let me know if these steps resolved your issue, or if there is anything else I can do to help. I look forward to hearing from you! Thanks,

BI Publisher Word Template The report does not contain any data fields.

I have OBIEE BI Publisher report (10.3.4) working fine using BIP but using MS Word 2003 I want to create new template and want to add charts etc.
Step 1. In MS Word I successfully login Oracle BI Publisher as Administrator
2. Oracle BI Publisher -> Open (I open the report)
3. Go to Insert -> Table Wizard
I get this error:
The report does not contain any data fields. Please make sure that the reports generates data with the default settings or provide a valid XML file.
Please help

Hi
How do I load XML data? Also why XML data load is required? Do I have to export XML data from BIP View screen and load from the same file from the word?
Please clarify
Thanks

File Screening Audit Report does not contain any data : report statistics is empty

Hi ,
I have enabled File screen audit and Record file screening activity in auditing database options in file server 2008.
I am getting details of file screen audit in Event log , But incident report file screen audit report does not contain any value.
Getting report for each incident of file screen audit , But it does not contain any data in report statistics.
Data available in scheduled report of file screen audit.. not available in incident report only..
Please assist...
Thanks,
Vasanth.M
Thanks, Vasanth.M.

Please note that, If the Record file screening activity in the auditing database check box is cleared, the File Screening Audit Reports will not contain any information. To configure file screen audit, I would refer you on this informative
technet library :
https://technet.microsoft.com/en-us/library/cc754540.aspx
Carlo

When I click on the tab with a + on it, located next to the active tab a new page does not open. If I click on "New Tab" in the File menu a new tab does not ope

When I click on the tab with a + on it, located next to the active tab a new page does not open. If I click on "New Tab" in the File menu a new tab does not open.

Hi jcatx2013, we don't really have enough information on your system to make specific suggestions...
Could you test in Firefox's Safe Mode? That's a standard diagnostic tool to bypass interference by extensions (and some custom settings). More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using
Help > Restart with Add-ons Disabled
In the dialog, click "Start in Safe Mode" (''not'' Reset)
Any difference?

Errors in the high-level relational engine. The data source view does not contain a definition for the table or view. The Source property may not have been set.

Hi All,
I have a cube in which i'm using the TIME DIM that i created in the warehouse. But now i wanted a new measure in the cube which is Average over time and when i wanted to created the new measure i got a message that no time dim was defined, so i created a
new time dimension in the SSAS using wizard. But when i tried to process the new time dimension i'm getting the follwoing error message
"Errors in the high-level relational engine. The data source view does not contain a definition for "SSASTIMEDIM" the table or view. The Source property may not have been set."
Can anyone please tell me why i cannot create a new measure average over the time using my time dimension? Also what am i doing wrong with the SSASTIMEDIM, that i'm getting the error.
Thanks

Hi PMunshi,
According to your description, you get the above error when processing the time dimension. Right?
In this scenario, since you have updated the DSV, it should have no problem on the table existence. One possibility is that table has been specified for tracking in the notifications for proactive caching, but isn't available any more for some
reason. Please change the setting in Proactive Caching into "MOLAP".
Reference:
How To Implement Proactive Caching in SQL Server Analysis Services SSAS
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
TechNet Community Support

Error (Data mining): The specified mining structure does not contain a valid model for the current task.

I'm trying to run the Cross validation report on a mining structure that contains just Microsoft Association Rules mining model. In Target Attribute, I've tried:
Actual(Service Description).SE value
Actual([Service Description]).[SE value]
Actual(Service Description)
Actual([Service Description])
just because i don't know what is the exact correct format, but none of them worked, and I always get the following error:
Error (Data mining): The specified mining structure does not contain a valid model for the current task.
the following is my mining model structure

Association rules does not allow for cross-validation
Mark Tabladillo PhD (MVP, SAS Expert; MCT, MCITP, MCAD .NET) http://www.marktab.net

Getting error "Cannot create a BACPAC from a file that does not contain exported data." from SqlManagementClient.Dac.ImportAsync

We're trying to import a dacpac to azure via the new SqlManagementClient DacOperations ImportAsync api I get an exception with the error: "Cannot create a BACPAC from a file that does not contain exported data."
This same dacpac imports fine using an alternate but less friendly API from sql server's tooling. We'd like to use the new management SDK instead for various reasons.

Hi Kyle A Wilt,
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Managed System Configuration ! The table does not contain any data !

Hi,
In Sol Man Setup , Managed System Configuration, in phase 6 - Create Logical Componets -
There is no Product Version and Product Instance Available.
The message is : " The table does not contain any data "
How can correct this problem ?
Thanks

Hi,
while creating new Logical Component via SMSY , you need to specify Product first.
e.g. if you managed system is ERP 6.0 , select Product as SAP ERP
once you select Product , it automatically fetches information for product Version and Main Instance depending upon Product field input.
Please check and let us know if issue still persits.
Thanks,
Rupali

Next Page does not contain data

Similar Messages

Maybe you are looking for