Next payment run parameter in automatic payment program

hi gurus
why next payment run date must be given in parameters tab of automatic payment program
thanks and regards
ramesh

Dear,
yes but You should create a background job of F110S, where You define a dynamic date variable variant as per Your requirement, by SE36.
I hope this helps.
Mauri

Similar Messages

Payment Proposal Error in Automatic Payment Program

While I am running the Automatic Payment Program Run after passing on the Parameters, I have created the Payment Proposal.
When I am trying the edit the payment prosal to block payment of some of the invoice line items, system is throwling a red signal error (Payment/Exception). I am not able to edit the payment proposal and proceed further.
Kindly help me out as the proje4ct has gone live and it is a critial requirement.
Thank you
Ravi
Mobile 9849393564

check with fowlling cases
1. payment terms
2. cash discounts
3. with- holding tax
4.next payment rundate
5. check payment block
let me know even checking of these things u have the same problems.
just now i discussed u over phone
if it is userful assgin the points
regards
venkat.

Payment to Customers via automatic payment run (Just like suppliers)

Hi all,
I do have a client requirement which is described below. Thank you for reading my post and suggesting any solution.
Customers made various payments in the past and those payments were cleared against invoices. During this process which
continues for many years, some customers accounts got accumulated with credit balance. Now the Business has decided to pay them back and to establish an automatic payment program to periodically pay back all those historical over-payments.
Issueing a credit note is not accespted as a solution -
Is it possible to define a new payment method to customers and do a payment run ?
Your help is appreciated.
Thanks & regards

Hi
Yes, in automatic program, you can include customers too. There is no need to create a seperate payment method for customers as long as its an outgoing payment.
Hope this helps.
Pushkaraj

Line Item Sorting in Payment Proposal in F110 (Automatic Payment Program)

Hi all SAP Gurus...
I really need a help here...
In FBZP, I set up 'note to payee lines on the form' restricted to 17 rows. And the sorting for line items, I use 'document date'.
For example, I have 68 open items. When I run F110, in the payment proposal, all the open items are grouped based on 17 items in each group, so I get 4 groups, but they were not sorted by the document date. All the open items seem like distributed to 4 groups randomly.
Could you please advise on how I can sort the line items in each group by the document date?
Thanks a lot!
Regards,
Arman

Hi:
Debit balance for vendor means something is to be received from vendor so that it will not be included in payment list. F110 looks for credit line items for postings,. Stand alone debit balances can not be picked up by default since during the payment run you need to net them off first. However if you want to consider debit balance for netting off then, put invoice reference in FB60 , system will club the amount of debit line items with respect to credit line items of that particular invoice. Hope this will help you.
Regards

How to make early payments via transaction F110 (automatic payment progr)?

Hi expert,
I am trying to make an early payment for vendor invoices which are not yet due.
How can they be included in the payment run of transaction F110?
I have made the payment run on 16.10.2009 with "documents entered up to" 01.11.2009.
2 invoices were already overdue (due date: 10.10.2009)
1 invoice is only due on 25.10.2009, but I want to pay it today.
I have chosen 26.10.2009 as "next payment date".
The payment program cannot find any data, not even the 2 invoices which are already overdue.
Do you have any experience in this matter?
Thank you.
Kind regards,
Linda

Dear Belinda,
To make early payment for the invoices which not due yet then just calculate their due dates and make sure "next payment run" is after these due dates then program will make payment for those invoices.
Problem you are facing is system is not considering any invoice for payment. Please enter the payment date in the "documents entered up to".
There might be many causes for this particular problem like documents have payment block, they are not due, no valid payment method found.
So, please analyze the log given on F110 screen and identify the problem. You will probably solve it.....
Regards,
Chintan Joshi.

How to generate checks when executing Automatic Payment Program (F110)

Is it possible to generate checks automatically when I execute the automatic payment program? Will reward points to any suggestion. Thanks!

hi patrick
try this.....ur problem may solve.....
Create Automatic Payment Transactions (F110)
Purpose
Use this procedure to generate checks proposals or ACH proposals and then subsequently issue checks or set up ACH files to be transmitted to the bank.
Trigger
Perform this procedure when through either an ACH or a check, a creditor of the University needs to be paid.
Prerequisites
Open invoices with reached due dates have to be present in the SAP system.
Menu Path
Use the following menu path to begin this transaction:
·         Select Accounting Financial Accounting Accounts Payable Periodic processing Payments to go to the Automatic Payment Transactions: Status screen.
Transaction Code
F110
Business Process Information
The automatic payment process will be centrally managed in the Accounts Payable Office. The automatic payment program will be executed each day for all open invoices (across vendors) in the system. There will be separate payment run execution corresponding to each payment method category:
Check payments: clears the open invoices and issues a check output
ACH payments: clears the open invoices and issues an ACH file output
Foreign currency payments: clears open invoices but no output is issued
State/Grant payments: clears open invoices but no output is issued
The process steps executed during the automatic payment program are:
Enter Payment Parameters
Edit/review Payment Proposal
Post Payments
Generate Payment Medium (print checks or create ACH payment file)
Generate Positive Payment File
The payment parameters are entered in order to limit the open invoices and credits selected for payment. It is important to note that the payment terms that are defined on the invoice will drive whether a invoice is due for payment during the current payment run. During the payment program execution, the invoices that are due for payment will be presented to the user on a payment proposal list.
The payment proposal is a list of expected payments grouped by vendor account. Invoices that are due for payment but cannot be paid due to some kind of accounting or system error are listed as exceptions. Examples of typical exceptions are missing banking information (for ACH payments) and blocked invoices. Some payment exceptions will be resolved at the Accounts Payable Office. However the Department must resolve some exceptions. When these types of exceptions appear on the payment proposals, the Accounts Payable Office will inform the Department of the blocked payment in order to get a resolution. Key personnel in the Accounts Payable Office will be the only resources to have access to the editing function of the payment proposal processing. Typically, there is no business reason the edit or change a payment proposal. Editing options for a payment proposal includes: changing the default disbursing bank account information or changing the payment method.
After the payment proposals have been reviewed and edited, the proposals are posted as payments. It is important to note that any open credit on the vendor's account is also taken in consideration when creating the vendor's payment. The payment method supplement defined on the invoice will drive the check sorting.
In addition to the printed check output, the payment program run produces an ACH file and a Positive Pay file. Both files are sent to the bank for further processing. The ACH file contains the vendor's payment and banking data. The Positive Pay file contains the check data (check processed, voided, etc) and is used for confirmation of payments.
Helpful Hints
·         The R/O/C column in the field description tables below defines whether the field is required (R), optional (O), or conditional (C).
·         On certain screens you may have to scroll to view some data entry fields.
·         Click the tab to view the current overall status of the payment process by viewing the informational messages.
Procedure
1. Start the transaction using the menu path or transaction code.
    Automatic Payment Transactions: Status
2. As required, complete the following fields:
·         Run date
·         Identification
3. Click the tab.
The payment program parameters are used to limit the program's selection of open invoices and credits.
    Automatic Payment Transactions: Parameters
4. As required, complete/review the following fields:
·         Posting date
·         Docs entered up to
·         Company codes
·         Pmt meths
·         Next p/date
·         Vendor
5. Click the tab.
Free selection criteria are extended parameter selection criteria used to limit the open invoices and credits selected in the payment run.
    Automatic Payment Transactions: Free Selection
6. Perform any of the following:
If You Want To
Then
Select data by a particular field value; use the match code on the Field Name field to obtain the required field
Enter the required field value to be considered in the payment program selection of open items. The field value is entered in the Values field
Payment selection can be based on fields on the invoice or credit memo document or fields on the vendor master.
Example: A (AP payment block)
Exclude the open items that match your field value
Select to the left of Exclude values.
Include only those open items that match your field value
Deselect to the left of Exclude values.
7. Click the tab.
This information is used to expand the information that is automatically recorded in the payment run log. The payment run log is used to diagnose any program errors during the payment run.
    Automatic Payment Transactions: Additional Log
8. Perform the following:
If You Want the Payment Program Log to Record
Then
Information on due date check
Select to the left of Due date check.
Activate this option.
Any payment method selection data
Select to the left of Payment method selection in all cases.
Activate this option.
Line item information the payment documents generated upon posting the payment proposal
Select to the left of Line items of the payment documents.
Activate this option.
9. As required, complete/review the following fields:
·         Vendors (from)
·         Vendors (to)
Enter the same vendor account number range for Accounts required section of the transaction.
10. Click the tab.
The specifications defined in this section of the transaction inform the payment program the correct form to use for check printing and the correct payment file format to use for ACH payments.
    Automatic Payment Transactions: Printout and DME
11. As required, complete the following fields:
·         RFFOAVIS
·         RFFOUS_C
12. Click the tab.
    Exit editing
13. Click to save the data.
If you want to delete the payment program parameters entered, select Edit Parameters Delete.
    Automatic Payment Transactions: Status (2)
The system displays the message, "Details have been saved for the run on XX/XX/XX XXXX."
14. Click .
If you want to refresh the screen in order to view the current status (processing step) of the payment program click at any time.
    Schedule Proposal
15. Perform one of the following:
If You Want To
Then
Execute the payment program (i.e. process the payment parameters entered and create a payment proposal) immediately
Select to the left of Start immediately.
Activate this option.
Designate a target computer
Enter the name in the Target computer field.
16. Click to process the payment parameters and create a payment proposal.
While the payment program is selecting and processing data, the status will display the message, "Proposal is running." When the payment proposal has completed and is ready for review/edit, the system will display the message, "Payment proposal has been created."
    Automatic Payment Transactions: Status (3)
The system displays the message, "Proposal run has been scheduled."
17. Click .
    Automatic Payment Transactions: Status (4)
The system updates the status, "Payment proposal has been created."
18. Perform one of the following:
If You Want To
Then
Go To
Execute the payment run
Click .
Step 19
Edit the payment proposal
Click .
Step 43
Display the payment proposal
Click .
Step 54
Display the payment proposal run log
Click .
Step 57
Delete the proposal
Select Edit Proposal Delete.
Step 60
Display the proposal list in a printer friendly format
Select Edit Proposal Proposal List....
Step 62
Display only the exception (error) invoices or credits
Select Edit Proposal Exception List....
Step 67
Exit this transaction
Step 72
    Schedule Payment
19. Perform the following:
If You Want To
Then
Execute the payment program (i.e. process the payment parameters entered and create a payment proposal) immediately
Select to the left of Start immediately.
Activate this option.
Designate a target computer
Enter the name in the Target computer field.
20. Click to process the payment proposal and post the payment documents.
While the payment program is selecting and processing data, the status will display 'Payment is running'. When the payment proposal posted the status will display 'Payment run has been carried out. Posting orders X generated, X completed. (X will represent the total number of checks produced).
    Automatic Payment Transactions: Status (5)
The system displays the message, "Payment run has been scheduled."
21. Click .
    Automatic Payment Transactions: Status (6)
The system updates the status, "Payment run has been carried out." If you click after seeing the status update, "Payment run has been carried out", the system will display an update to the status, "Posting orders: XXXX generated, XXXX completed."
22. Perform one of the following:
If You Want To
Then
Go To
Review the payments posted
Click .
Step 23
Display the payment proposal
Click .
Step 26
Display the payment proposal run log
Click .
Step 29
Display the payment list in a printer friendly format
Select Edit Payments Payment List.
Step 32
Display only the exception (error) invoices or credits
Select Edit Payments Exception List.
Step 36
Print the payment run information
Click .
Step 40
Exit this transaction
Step 72
    Job Log Entries for F110-XXXX-XXXX / XXXX
23. Review the displayed information.
24. Click .
25. Return to Step 22.
    Display Payment Proposal: Payments
26. Review the displayed information.
27. Click .
28. Return to Step 22.
    Job Log Entries for F110-XXXX-XXXX-X / XXXX (2)
29. Review the displayed information.
30. Click .
31. Return to Step 22.
    List Variant
32. Click .
    Payment list
33. Review the displayed information.
34. Click .
35. Return to Step 22.
    List Variant (2)
36. Click .
    Payment list (2)
37. Review the displayed information.
38. Click .
39. Return to Step 22.
    Schedule Print
40. As required, complete/review the following fields:
·         Start date
·         Start immediately
·         Start time
·         Target computer
·         Job name
41. Click .
42. Return to Step 22.
    Accounting clerk
43. Click .
    Edit Payment Proposal: Payments
44. Review the displayed information.
45. Perform one of the following:
If You Want To
Then
Go To
Continue with the payment process
Click .
Step 18
Review/edit invoice information for the payment (invoice numbers, discounts, payment amounts, etc).
1. Click on the line you want to select.
2. Click .
Step 46
Change the key payment information (payment method, house bank, payee name and address, etc.)
1. Click on the line you want to select.
2. Click .
This option does not work for lines that have exceptions.
Step 51
    Edit Payment Proposal: Open Items
46. Double-click on the line you want to choose.
    Change Line Items
47. As required, complete/review the following fields:
·         Payment block
·         Discount amount
·         Cash discount %
48. Click .
49. Click .
50. Return to Step 45.
    Change Payment
51. As required, complete/review the following fields:
·         Payment method
·         Pmt meth.supl.
·         Due date
52. Click .
53. Return to Step 45.
    Display Payment Proposal: Payments
54. Review the displayed information.
55. Click .
56. Return to Step 18.
    Job Log Entries for F110-XXXX-XXXX-X / XXXX (3)
57. Review the displayed information.
58. Click .
59. Return to Step 18.
    Delete proposal
60. Click .
    Automatic Payment Transactions: Status (7)
The system displays the message, "Data and log deleted."
61. Go to Step 72.
    List Variant (3)
62. As required, complete the following field:
·         Variant
63. Click .
    Payment list (3)
64. Review the displayed information.
65. Click .
66. Return to Step 18.
    List Variant (4)
67. As required, complete the following field:
·         Variant
68. Click .
    Payment list (4)
69. Review the displayed information.
70. Click .
71. Return to Step 18.
72. Click until you return to the SAP Easy Access screen.
73. You have completed this transaction.
Result
You have executed a payment proposal, executed and posted a payment run and printed checks.
reward me points.......dont forget

Automatic payment program process

Hi,
plz tell me the process of Automatic payment program?
how to execute the program and wht are the steps involved while running this Automatic payment program..?
pls give me a detailed explanation on Automatic Payment Program?
Regards
Ajay..

Dear, As found..
Automatic payment program in SAP selects appropriate invoices to be paid based on following paramete:
1. Documents entered upto. The selects invoices entered in SAP system with entry date upto the date specified in the filed.
2. Nex payment run date: The progam selects invoices in SAP system whcih will be overdue or incur lost cash discounts if paid on the date specified in this field.
When executing the automatic payment program (F110 transaction), a proposal run must be always be carried out in SAP system first. The proposal list will sometimes include exceptions.
Common exceptions are:
SAP Invoice contains payment block. To pay this invoice, remove the payment block when editing the proposal list (unless the payment block is one whch cannot be edited during payment proposal) or remove payment block via FB02 for each SAP invoice.
Payment method in vendor master/invoice is different from the one specified in the payment program parameter. To pay this invoice, allocate the payment method in the parameter of the payment run to this invoice while editing the proposal list.
Vendor master does not contain information specified as mandatory in the payment method in teh paramter of the SAP paymement program. For example, depending on the payment method configuration for the country, certain fileds such as city or PO Box must be populated in the vendor master. In this case, delete the proposal run, make the necessary changes in the vendor master and execute the proposal run again.
Typically, Payment program pays due invoices in full. To cater for partial payment via automatic payment program, payment request will be used (optional). Down payments to staff and vendorcan also be made via the automatic payment program if down payment request was posted.
If foreign currency invoice is paid via automatic payment run, the relevant exchange rate type should be selected in the payment run parameter. Exchange rate gain/ loss on making the payment will be automatically posted to their relevant profit and loss account based on the reconciliation account of vendor.
The payment method specified in the parameter of the payment program determines the bank account and the GL account used to make the payment. Also, depending on the payment method, cheques, other forms and payment files will be generated.
Continued....

Urgent - Automatic Payment program

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
Hello,
The automatic payment program picks up the documents that have been cleared in the last year.
what could be the reason for this?
Please advise
Regards,
Jay

Hi
Not clear what the issue is. Please explain in detail with details of the run date and id.
Karthik

Where can do you link the Account payable (AP) to Automatic Payment Program

Hi SAP Experts,
Where can do you link the Account payable (AP) to Automatic Payment Program (APP) what is t - code and what is the table name and Accounts Receivable (AR) to Automatic payment program (APP) what is t - code and what is the table name
Thanks in Advance.
Regards.
Srinivas

Hi Srinivas,
The link is created when you enter vendor number in parameters tab of F110 and do the run. Here in Parameters you enter the vendor code for which you need to run APP. Based on vendors provided here in F110 Parameter tab, the F110 program checks for the open items of that vendor which are to be paid and selects them accordingly. Hope this clarifies.
Ofcourse in Vendor master under Payment transactions Accounting you have to full the necessary fields like Payment methods etc under Automatic Payment Transactions.
Hope this clarifies
Kind Regards
Soumya

Posting error in Automatic Payment Run

I have executed a payment run (F110). The payment log show a payment document against a particular vendor. But the system has not posted this document.
I checked in FB03 no such document exists. Could anyone help me to find a reason for this please?
Regards,
Prasad

Hello,
Regarding this issue, there may be some update terminations in SM13
relating to this payments. This is because when you tried to pay this
item, the system attempted to post a payment document. This was not
successful (since the item remained open) so it should have created an
update termination.
In addition, you could compare the contents of the REGUH table against
the contents of the BKPF table, to make sure that every payment
document listed in REGUH was actually posted.
Browse table REGUV and look for cases where the "Number of Payments
Created" (ANZER) does not equal "Number of Payments Posted" (ANZGB).
Of course, I would recommend that your Account Payable application
people report any differences in payments created vs payment posted
immediately (this can be found on the F110 Status screen). Also, I
recommend reviewing system logs using trans SM13 to catch possible
update terminates on a daily basis.
Please also note the following:
1. Use option 'Payment document validation' in the variant of the
    payment medium program to create the payment media for the payment
    run in which the update terminations occurred. As a result, no
    payment media are generated for the payment documents whose update
    was terminated. The respective items are selected and paid in the
    next payment run, alternatively you can also carry out a manual
    payment.
2. If the payment media have already been generated, manually clear the
    items for which the payment was supposed to be executed. This
    prevents the items from being paid again by a following payment run.
In both cases, you can document the caused document number gaps by means
of report RFBNUM00. Afterwards you can document the update terminations
by means of report RFVBER00.
REgards,
REnan

Advance payment through automatic payment program

Hi,
Plz any one let me know how do we do advance payment to vendor through automatic payment program

Make a Down Payment Request (Advance Payment) in F-47 and then run F110.
Following configuration is needed-
In OBYR assign G/L Accounts to a Special G/L Indicator. Assign this Special G/L Indicator in FBZP then run F110. Payment run will take those Down Payment Requests and make Down Payments to the vendors.
The main purpose of Automatic payment program is to post payments to multiple vendors at a time. So it is not advisable to post down payments to multiple vendors using F110. You can post individually using F-48 and clear them using F-54
Thanks

Clear Down payment against Vendor Invoice through Automatic Payment Program

Hi
We have to adjust vendor invoice against down payment (Advance) made through automatic payment program (F110)
Please guide us is there any configuration require to consider Down payment transactions during F110 to clear against Vendor Invoice
Ex :1. Advance payment made through special GL indicator 50K.
2. Invoice document 75K posted in vendor.
3. Now we have to clear down payment made (50K) against 75K through F110.
Regards
Sreenivasulu

Hi srinivasulu,
First u create down payment request through F-47 and define the spl gl indicator for down payment and assign the gl account for down payment gl code..
Regards,
Nivas

Automatic payment run

Hi
One of the User run the F110 on some date and gave vendor numbers from 1 to 99999 with AP wire payment. Finally it showed 11 posting orders generated and completed. When I see the FBL1N for the vendor # 10346, it is showing under open only not cleared.
Could you please advise me what should I do for this.
Regards
Murali

Here are a couple of things that you can check.
1. Go to FBZP and check if the payment method is in the country of the company code in which you are running the automatic payment run (also check in 'payment methods in country' if you have anything in allowed currencies. If you have none, all currencies would work. If you have specified any, it will work only for that currency).
2. FBZP - Payment methods in company code - Check if the payment method is assigned to the company code and in the same option (payment methods per country) check if foreign business partner allowed checkbox is checked in case your vendor's country is other than the country of your company code.
3. FBZP - Bank determination - Check if the payment method is having (a) ranking order and CoCd, (b) housebank/payment method (here again the same rule above applies to currency) is assigned to bank account ID and GL account, and (c) available amounts. Value Date and Expenses/Charges are not important.
Good luck!
Assign points if it helps!!!

EXIT FOR SELECTING AUTOMATIC PAYMENT PROGRAM VARIANT

HI Experts,
I want to fix the variant as per the payment method selected in automatic payment method parameter.
( Ex. i want to populate the variant CHECK in print parameters if user enter C as the payment method )
How it can be done? is there any exit available?
it is urgent. Points will be rewarded.
regards,
MAHESH

hi,
check these badi's.
FI_BSTM_MC_EXIT FI Account Statement: Exit from MultiCash Conversion
FI_F110_SCHEDULE_JOB F110: Check before scheduling a proposal/update run

Automatic Payment Transaction (F110) - questions bout Paymnt Doc generated

Hi all,
I have a question regarding to payment documents generated by Automatic Payment Transaction (tcode F110).
After a payment run, some payments are created. But I found that same payment documents are generated over several payment runs for same vendors. And those payments pay for the same invoices.
For example
Run date   ____________     ID    ______     Vendor ______ Payment
Jan 01, 2009 ______ ID001 ______ V0001 ______   P1
Jan 15, 2009 ______ ID002 ______ V0001 ______   P1
Jan 15, 2009 ______ ID003 ______ V0001 ______   P1
Payment P1 pays for Invoices I1, I2, I3.
It looks like the data is repeated.
When I check tables, REGUH, there are 3 entries and 9 entries in REGUP (1 payment - 3 invoices => 9 records). It also is updated in BKPF and BSEG as well.
The question is: how can I identify which Payment Run (date, id) the payment document belongs to?
I don't understand because i think SAP automatically generates document number, and it cannot be the same for every run.
Please guys, help explain it for me.How does it work in this way?
Thanks in advance

Hello
In this process, you will complete a payment transaction automatically.
You should first enter some vendor invoices so that there are enough due payables available in the system. In order to reduce the work you need to do, we have created a CATT (Computer Aided Test Tool) that generates invoices automatically when activated.
Secondly, you will create a payment program and enter the parameters necessary for selecting the items to be paid.
Next, you will execute a payment proposal list and check its log. You will find that some items are blocked for payment. You will need to update the list in order to remove the block.
Later, you will start an actual run. Then you will set the print program so that the payment forms and accompanying payment advice notes and payment summaries are correctly assigned to the payment run. Finally, you will print the payment forms. If you are using North American data, you will then need to analyze the check register.
Check the link for detailed procedures
Reg
Suresh

Next payment run parameter in automatic payment program

Similar Messages

Maybe you are looking for