'Next Status' in status overview of Objective settings & Appraisals

Hello,
While configuring the status flow for a template in objective settings, we have the field called 'NEXT STATUS".
There are only three options
a. Save and change to display mode
b. Save and leave Appraisal Document
c. Nothing
Infact, we wanted the the document to be saved and moved to the next status with "Change mode" (or at least the push buttons in the next status should be working).
Is there any way to add this choice?
Thank You
Raghu Kolukuluri

Raghu,
The "NEXT STATUS" field specifies the status(save &leave or save &display), but you're talking about the status flow change, which is very much possible with in the same tab "Status Flow".
There is a filed called Pushbutton, this is where you select the pushbutton for the form to change the status flow. This staus flow change you can define in the field "TARGET STATUS", if you have any substatus in that status you can define that in " TARGET SUBSTATUS".
I hope this helps.Award points if this resolves your issue.
Regards
Ramakrishna Ramadurgam

Similar Messages

Status overview iview Objective Settings & appraisals

Hi,
is there a way to hide some status columns in the status overview iview of objective settings and appraisals. we tried by deactivating the available status in the appraisal template, but it does not seem to affect the iview.
we would like to hide them since they are not used in our process.
we are using ECC 5.0.
regards,
Bert Caryn

Hi
In our case, if a status is not used in Appraisal Template (in tcode OOAM - tab 'Status Flow' for the template - we removed the check against the unwanted status), that status column does not appear in Status Overview iView.
This is FYI. I don't know why this is not the case with you, but you may un-release and release the template and check again.
One more point - You may check view named V_TWPC_ACOL (Assign Columns to a Column Group). In this, you can set column visibility parameters such as Visible, Invisible and Do Not Display.
Hope this helps.
Regards,
Vikas Bhatia

MSS Status overview iview Objective Settings & appraisals

Hi All,
Currently the status overview Iview of MSS for appraisals display all the employees(in org unit) irrespective of whether the employee/appraisee has existing documents. This is because this Iview also has the functionality of creating the appraisal documents from here.
In our case we don't create appraisal documents from this Ivew, so we hide the "In Preparation".
Now the question is we want to filter the employees and display only those who has appraisal documents already created. How could we achive this?
All we need is: We wanted to give an view to higher level manager with all the employees who has apprisal documents in completed status and he need to just approve/reject. Is there any other way we can achive this with out using the Status Overview Iview. I am not able to locate any bsp which serves this purpose from HAP_DOCUMENT.
Please adive me, how can I achive this.
Apprciate your inputs and any kind of help.
Thank You,
Hari.

Hi, Check HAP_CALIBRATION / search.htm and result.htm you can enhance his behavior modifying filtering,
Best Regards.-

Reporting - Objective Settings & Appraisals

Hi,
My client is using the Objective Settings & Appraisals component in SAP version ECC 5.0.
Does anyone know how to generate a report of employees who do not have a current appraisal document on the system?
Thanks,
Janet

Hi,
Try using this report PHAP_SEARCH.
Give the employee id in appraisee filed and execute.
All the appraisal documents related to the employe will be available.
You can download it to EXCEL or SMARTFORM.
I assume u know ABAP.
You can try using the table "HRHAP_APPEE". here you have to use the negative logic to get the employees who not have appraisal documents.
Create a new report for this table and query with all active employees.
For every sy-subrc fali, this means that the appraisal document does not exist.
Hope this helps you.
Regards,
Subbu.

Adding more Push buttons in Status Flow of Objective Settings & Appraisals

Hi,
In my Template Design, under status flow tab, we are able to create new push buttons.
SAP is allowing, to create only upto 3 push buttons per outbound status/sub-status combination.
In our application, we need 5 push buttons in one of the outbound status/sub-status.
Can any expert suggest me what should I do?
Advanced thanks
Regards
Raghu K

Raghu,
The "NEXT STATUS" field specifies the status(save &leave or save &display), but you're talking about the status flow change, which is very much possible with in the same tab "Status Flow".
There is a filed called Pushbutton, this is where you select the pushbutton for the form to change the status flow. This staus flow change you can define in the field "TARGET STATUS", if you have any substatus in that status you can define that in " TARGET SUBSTATUS".
I hope this helps.Award points if this resolves your issue.
Regards
Ramakrishna Ramadurgam

Part Appraiser Functionality in SAP Objective Settings & Appraisals

Hi All,
I have specific requirement where, at the time of Annual Appraisal when Employee submits his/her final rating, Appraisal Form should be routed towards Part Appraiser, if the same has been selected in the form. If part appraiser is selected for all Appraisal Forms, then adding a new SubStatus (Part Appraisal in Process) under Status (Annual Appraisal) would have made sense. But in case where addition of part appraiser in appraisal template is dynamic, how should we achieve this kind of scenario?
Thanks a Lot!
Prashant

Hi Sameer,
Pls share with us if you know more details
We are also exploring the feasibility using Talent Management Specialist.
Regards
Badarinarayana

HRHAP00_SELECTION Badi in Objective Settings & Appraisals

Dear All
Can we add one more element / authorised person in the appraisal template.
As per my requirement i want to authorise one more person in the list apart from All users,Appraisee, Appraiser, Further Participant, Higher Level Manager, Part Appraiser.
As per my view it is to be added in the above said BAdi, but I am not sure.
How to add it?
Thanks
Vikas

Ya Venki
This is not a BAdi.
Thanks for the reply. Actually what I am looking for is a workflow rule.
Thanks
Vikas

Message in Status Bar while using ALV Objects

Hi All,
If we use ALV in objects (Build in class and methods for ALV),is it possible to display a error message using Message statement in Status bar.
Thanks in advance.

Hi,
Yes, it is possible. You can do it using the ALV Object Model (ALV OO methods) within an event handler method. For example, the event "added_function of cl_salv_events" can be used and you can add code similar to the following code within the event handler method:
CASE e_salv_function.
WHEN 'XYZ'.
MESSAGE w001(00) WITH 'Message text goes here...'.
ENDCASE.
The warning message will either show up as a popup or in the status bar depending on your user settings. Of course, you can also use other message types (e.g. I, E, S) or other message techniques besides the message statement.
Best Regards,
Jamie

Issue in Adding Custom Status Defnition for a resource object

Hi,
We have installed OIM and patch it to 9.102. We have created one custom resource object (flat file connector) for reconciliation. As part of requirement we need to define three status for this resource object - Enabled, Suspended and Disabled. As Enabled and Disabled status are available OOTB, i have added 'Suspended' status under the Status Definition in resource object. Now the issue is that if we are passing reconcile user status to either Enabled or Disabled, the status is changing fine on Linked user resource object. But if the status passed as 'Suspended' the resource account status of linked user (OIM) is not changed.
We have mapped the resource side Status attribute to OIM_OBJECT_STATUS under process definition. I also made the entry 'Suspended' in 'Lookup.Object Object Status' lookup to see if any help, but no luck.
The 'Suspended' status is successfully added in OST table against the object key and on manually updating the status key against the resource object it is reflecting 'Suspended' status through admin console. User-->Resource Profile
Does anyone have any clue if the requirement is correct (adding a custom object status) and so, where i am going wrong. Thanks in advance.

A quick doubt..If i have written down a process task and calling this on completion of 'Reconciliation Update Received' and in this process task , a adapter is attached which is updating the resource account status (ost_status) on the basis of some custom attributes. This task is working fine and updating the status. But the issue is that once this task is complete, the mapping in Process definition (loginDisabled <MetaDirectory> --> OIM_OBJECT_STATUS) overrides the status.
Per my understanding the flow is going like this-->
1. Reconciliation run
2. Event Linked
3. Reconciliation Update Received
4. Call The custom Task --> Update the OST Status
5. Update the OST Status per the mapping OIM_OBJECT_STATUS.
Is there any way we can implement that the status update in (5) occurs before (4) so that my custom task status can override the (5) as per my business requirement.

System Status of newly added project objects for a RELEASED Project.

Hi Experts
During the course of execution of project, we may need to add new activities.
However, as the project is released, the newly added activtity or project object attains REL status.
How to ensure CRTD status for the newly created object so that can ensure subsequent release by Higher Authority.
I think user status may be useful here but i do not know how to set. Please suggest feasible solution.
Warm regards
ramSiva

Release status is PS pass on for PS Objects. So, Create two no. of Level one WBS Element in your PS Structure. One for which you want release that structure you create under that WBS and Second WBS don't Release and use the same leg for your created status structuring.
And do not Release Project Definition, Let it be max. PREL only, Till your structuring process is over.
I think User status cannot help you in this case. ( Because user status reside between the System Status )
With Regards
Nitin P.

Status profile not allowed for object type

hi
i had created a status profile (for having 2 statuses before production order release) and assigned in the order type.
but while creating the production order i receive the following error.
Message no - CO622
status profile not allowed for object type
please provide your inputs
regards
Ramesh

Ramesh,
once you cerate a Status profile in BS02 and add status to the same. in the tollbar you will see OBJECT TYPE push button, select teh obejcts like PP/PM order header / operation /comepeoent and PRT ect where that staus can be applied.
Then assign the statsu profile to order type.

Objective Setting & Appraisals - Status Flow

Hello,
I'm working on OSA module.
When i configure the status flow, i have two options regarding the state of the appraisal after status change:
- Save and Change to Display Mode
- Save and Exit Appraisal Document.
My requirement is that the appraisal is saved and user can continue editing.
Is there a way to add an option here?
Regards,
Fabio.

Hi -
Typically if you are using push buttons to move the document into a new status / sub status, you would be moving the document to another person in the process, so I'd be interested to know what the exact requirement is. Are you wanting to put it in a new sub status for reporting reasons?
If you are making changes and want to change the status, but still stay within the document and edit, im not sure you can do that through standard configuration. Have you tried not selecting one of the two options and leaving it blank? I wonder what that would do?
Thanks,
Nick

Quarterly & Half yearly appraisal in objective settings and appraisals

Hi,
I've customized the Objective Settings and Appraisals, created a template with part appraisal & its working properly. In my company the appraisals take place every 6 months i.e twice a year. If I create an appraisal document for an employee with validity say 1 year i.e. 01.04.2009 to 31.03.2010 in infotype 0025. Now within same appraisal document using part appraisal concept how can I do appraisal of that employee 2 times. Is it possible or I'll have to create 2 records in infotype 25, first for first 6 months & second for next 6 months. what should be the standard process?

Hello,
The administrator functions are in transaction PHAP_ADMIN. If you have a customer report and want to assign this to the transaction you implement HRHAP00_ADMIN. This has the advantage that the document selection (screen) is a given and you only need to start the report on the selected documents.
However, you normally would not give the administrator functionality to a 'normal' manager. This because the admin functions are performed without any checks and are very powerfull.
Your requirement can be or done via statusflow configuration (with extention set 2.00 and higher) or only by the administrator. To be honest, I think the statusflow won't give you the flexibility you probably want in this case (do workflows get re-triggered, are value determinations restarted etc etc.)
In our design resetting a document status is an interuption in the process which should only be possible for the administrator. The transaction phap_change_pa allows the manager to reset the document from completed to in process but thats all (This is not available in the portal).
Regarsd and Groetjes,
Maurice

What is the ODS object settings?

What is the ODS object settings?

Use
When creating and changing an ODS object, you can make the following settings:
BEx Reporting
With the BEx Reporting indicator, you determine whether the ODS object is immediately available for BEx queries. If the indicator is not set, no SIDs are generated for the new characteristics when the data in the ODS object is activated. This optimizes the performance of the activation process, but the ODS object is not available as an InfoProvider for queries. Turn the indicator off for all ODS objects that are only being used for further processing of data in other data targets or that are being used in InfoSets.
ODS Object Type
Select the ODS object type. You can choose between standard and transactional, whereby standard is pre-installed and transactional is only meant for special cases. You can switch the type as long as there is still no data in the ODS object.
See also Transactional ODS Objects.
Unique Data Records
With the Unique Data Records indicator, you determine whether only unique data records are to be updated to the ODS object. This means that you cannot load a data record into the ODS object the key combination for which already exists in the system u2013 otherwise a termination occurs. Only use this setting when you are sure that only unique data records are to be loaded into the ODS object (for example, single documents). A typical application of this is in the loading of mass data. It improves the load performance.
Note
You can also deselect this indicator again (even if data has already been loaded into the ODS object). This can be necessary if you want to re-post deleted data records using a repair request (see: Tab Page: Updating). In this case, you need to deselect the Unique Data Records indicator before posting the repair request, following which you can then reset the Unique Data Records indicator once more. The regeneration of metadata of the Export DataSource, which takes place when the ODS object is reactivated, has no effect on the existing data mart delta method.
Check Table for the InfoObject
Here the name of the InfoObject is displayed for which the ODS object is also the check table, if necessary. You can specify this when creating an InfoObject. See also Tab Page: Master Data/Texts in the InfoObject maintenance.
Automatically Setting Quality Status to OK
With this indicator, you can determine that the system automatically sets the quality status to OK after loading data into the ODS object. You should turn on this function. You should only deselect this indicator if you want to check the data after it has been loaded.
Automatically Activating the ODS Object Data
With this indicator, you can establish that the data that has Quality Status OK be transferred from the activation queue into the active data table, and that the change log is updated. Activation is carried out by a new job that is started after loading into an ODS object is complete. If the activation process terminates, there can be no automatic update.
Automatically Updating Data from the ODS Object
With this indicator, you can establish that the ODS object data be automatically updated. Once it has been activated, the data is updated in the data targets. An init. update is carried out automatically with the first update. If the activation process terminates, there can be no automatic update. The update is carried out by a new job that is started once activation is complete.
Note
Only activate automatic activation and updating if you can ensure that these processes do not overlap.
If you use process chains to guarantee serial processing of the process, these settings are not supported for the object (with the exception of setting the quality status). Then you have to include the automatic processes as process types in the process chain.
Also refer to the example for Including ODS Objects in Process Chains.

Bring user status without status number in Notification

Hi,
I need to bring user status without status number in Notification infoObject using status concept.
Please help me to fix this.
Thanks

Hi Pria,
Wht i understand is that you want the status of notifications.
In the Notif Datasource you wull have OBJNR,Object Number and all the Status are stored in JEST table.
Pass the OBJNR from Notif to JEST and populate the Status.
Hope this helps,...else let us know the exact issue,
rgds
SVU

'Next Status' in status overview of Objective settings & Appraisals

Similar Messages

Maybe you are looking for