Next step? iPod appears dead
Last night, while I was listening to the iPod (fifth generation 60GB), it stopped midsong (I was charging it at the time). After I tried to toggle back to a directory and then to shut it down, it brought up the sad icon and the prompt to the apple.com/support/iPod link.
I've tried recharging with no change of status. I've also tried to connect it with my iBook but iTunes won't come up and it won't connect (a first for me).
I've got a feeling it's dead, but before I send it in for restoring (and wiping out 5,800+ songs), I thought I'd check to see whether anyone else has any other suggestions? (I have most of the music on CD, so I can reprogram, but before I go to that step, I thought I'd see if there's anything else less drastic I can try.)
Thanks.
iBook G4 Mac OS X (10.4)
Sounds like you might have to restore it, but you can do that yourself. Backup your library before you do restore it, that way you wont have to go back and burn all the cd's over again and it will save you a LOT of time. The link below is how to restore your iPod. Good luck.
http://docs.info.apple.com/article.html?artnum=60983
Similar Messages
-
I have ipod 4G black/white .. if the hard drive is faulty , can i still charge the battery and see the results on the ipod display?
Also cannot reset/restore/disk mode on my ipod, assume hdd is flty, but also suspect battery flt, hence question above? any help appreciated?Sounds like you might have to restore it, but you can do that yourself. Backup your library before you do restore it, that way you wont have to go back and burn all the cd's over again and it will save you a LOT of time. The link below is how to restore your iPod. Good luck.
http://docs.info.apple.com/article.html?artnum=60983 -
TS1372 error 1601 ipod classic ipod appears dead does nothing
my ipod classic about six months old just all of a sudden does nothing. Screen totally blank tried to reset just get error message 1601 usb device not recognized. Dont know what to do really cant afford repair or replacement any help would be appreciated.
ThanksIf it is six month old, bring it in to Apple Store for the Genius to have a look, they may get you a replacement if it is not water damaged since it is under warranty.
-
Ipod Suddenly DEAD (Improperly Disconnected)?? Gulp :(
I have an 80g Classic. It is Windows formatted and I was trying to reformat it for Mac. I connected it to my G5 desktop running iTunes 7.6.2 with the USB cable. Itunes told me it was downloading the correct software. It was taking a REALLY long time...after quite a while it then looked like it was reformatting (hard to say what it was doing)...it then asked me for my G5 password. Then it started to 'sych'...it looked like it was synching pictures (there was like 1,000 pics it was slowly converting each one to ipod format and importing it to the iPod). I didn't want it to sych and I removed the iPod without ejecting the icon and without getting the 'ok to disconnect' screen...on hindsight probably a big mistake.
Immediately when I removed it, and still now, the iPod appears DEAD. It does not power on (it was fully charged right before I did all this so I know it's not the battery). Could I have disconnected while it was formatting and it has caused a software issue with the ipod's HD? Any ideas how to get it working again??? Presently a dark screen on the ipod and NO signs of life....GULP!!
Thanks a bunch for any ideas!
-Lovegasoline
PS: IF I am able to get the ipod back to life, what is the recommended way to change it from Windows format to Mac?
Message was edited by: LovegasolineDuring the improper ejection, either the software being corrupted or the hard drive of the iPod got crashed (bad sectors). Have a read the following carefully, I believe the way to solve it is quite similar.
The best way to change the format of your iPod - just do a Restore for your iPod on your Mac.
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921�
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
http://www.ipodresq.com/index.php
http://www.ifixit.com/
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
Spank your iPod
http://www.youtube.com/watch?v=3ljPhrFUaOY
http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
Cant put it into disk mode
http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
I think my iPod just died its final death
http://discussions.apple.com/thread.jspa?messageID=3813051
Apple logo & monochrome battery stay
http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
My iPod ism’t resetting and isn’t being read by my computer
http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote
Message was edited by: Mitch 751 -
Ipod not recognized by itunes...next step for nike+
when i started to set up the nike+ i downloaded the new version of itunes then later downloaded the new software update for the ipod nano...now when i plug the ipod into the computer using the usb cord, i get a message that says this...The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software....i have attempted to install, reinstall, remove and install again, itunes and the updated software... yet it still will not recognize the ipod when it is plugged in. How do i get the ipod to be recognized and then what is my next step for using the Nike+ shoes?
ipod nanoI can't even get the tab that says Nike+ when I am trying to sync up. I can't get it to even go on to the Itunes. I can purchase music no problem
-
The first time I connected my new My Passport portable hard drive to my MacBook Pro, the message asking if I want to use the drive to back up with Time Machine did not appear. I would like to set it up to do this. What would my next step be?
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Open Time Machine preferences to select this drive for use as the backup drive. Turn on Time Machine. -
My mini ipod appears off and not respond to any commands when pressed the buttons to reset, apple logo appeared and then the apple support site and it shuts down. already tried all the steps, but none worked, and when I plug it into my computer it does not appear in the iTunes bar. what do I do?
If MacKeeper corrupted the Recovery partition then even I underestimated its potential for damage. Garbage "cleaning" apps will cause misery but I have not found that the Recovery partition to have been affected by using MacKeeper or anything like it. I doubt that it did so, but I have learned not to underestimate the potential for such things to result in system corruption.
Before concluding your Mac has a hardware failure, try booting OS X Internet Recovery by holding command option r on startup (three fingers). That will force your iMac to bypass the Recovery partition altogether, and convey the ability to create a new one.
An Internet connection will be required (wired or wireless).
At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
Assuming the HD remains usable you can then use Disk Utility to erase it. Reinstall OS X, restore your essential software and other files, and don't reinstall the junk. -
my iPod appeared to be dead, i plugged it into my computer to charge and it said it needed to be restored. it updated it and now is stuck and my itunes says "waiting for iPod" and has been this way for hours. i've tried to hold down the home and power button and nothing happens!! my computere and itunes recognizes the iPod, but the iPod its self is completely unresponsive!! and helpoful hints?
See Here...
AMDS
http://support.apple.com/kb/TS1567 -
My iPod shows up as an iPhone in iTunes. I want to restore, but I am prompted to check to see if I have the latest software and retry. What is my next step?
See if plcing the iPod in Recovery mode will allow a restore.
Next try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
Suspect dead power supply -- next steps, recommendations?
Hi all!
Our 17" iMac won't power on and I suspect it's the power supply (I tried different outlets and power cords). What should my next steps be? For example, while browsing I saw mention of LED indicators inside the unit. Is that the next logical step?
I don't necessarily want to continue using the iMac since I have a much newer MacBook Pro that I can use instead. However, I would like to get all my iTunes files off the iMac (I have a backup that's two months old, but I've purchased a lot of music/apps/videos since then). So if it's easier/cheaper, I'd be open to suggestions other than fixing the iMac. For example, can I pull the hard drive from the iMac and get some sort of external enclosure so that I can plug it into my MacBook Pro to copy the files off? If so, what sort of enclosure would I need for the iMac's hard drive (links?)
Thanks so much in advance!Good old Apple forums. My iMac wouldn't start up and the first post on the list this past Thursday was this thread!
The machine had powered itself down twice and the last time I couldn't start it up. I did do a backup the night before.
I did the LED test all the way thru. Nice to learn that one. After #12 indicated my logic board needed to be replaced, I made a Genius appointment for two days later. There, Andrew at the Walnut Creek, CA store opened up the machine, saw that the condensers were fine and sent the machine upstairs for a new power supply. He said that sometimes the LED test will indicate the logic board, but most of the time it's the power supply. $85 each for the part and labor = $170. Much cheaper than the alternative.
Now that was one of my better Apple Store experiences. -
Ipod appears on desktop not in itunes
One day, I went to sync my ipod (2nd generation click wheel from 2004) with itunes and I ran into trouble.
My ipod didn't appear in Itunes or desktop and when I (properly) disconnected the ipod from Itunes all my music had been erased. I came to apple's site and followed the "not appearing anywhere on computer" steps.
I got my ipod to reappear on my mac desktop. But it didn't recognize it as "liz's ipod" anymore just "Ipod."
And it still won't appear in Itunes.
I've updated itunes, tried several different usb cord, reset it till one day... I got it to appear in itunes (for less than ten seconds).
I have a family road trip soon and would like my music back so any tips or suggestions would be helpful.
I honestly think it's just dead.Hey there,
Have you had a chance to look at this Apple support document relating to this issue? If not, check it out. Hope it helps.
[iPod appears on the Mac OS X desktop but not in iTunes|http://support.apple.com/kb/TA27658?viewlocale=en_US]
B-rock -
My iPod was dead but now it's alive and kicking -- I'm confused
Friday morning, I was at the gym listening to my 4th generation iPod (which I have owned for about 14 months -- after warranty) when I heard a click and then my iPod froze. I got to my office and and saw the "unhappy ipod" on the screen. I went to the apple iPod support site and followed the "5 Rs". Nothing happened.
So I took the iPod to the Apple Store Saturday morning and one of the "geniuses" took a look at it. He tried resetting and putting it into disk mode. He told me the battery needed to be replaced and gave me a list of dealers although he recommended iPodResq.
I went to their website yesterday morning (my iPod was still dead to the world) and ordered the battery replacement service ($89.00). Today I received the overnight shipping box in which to send my iPod for repair.
So, I reach for my iPod (which has been in my bag for over 24 hours since I was unable to use it). Well, I pull it out of the bag and the thing IS ALIVE AND KICKING. Works fine, like there was nothing ever wrong with it. All my music was still there along with some audio books. What the???
Now I've got the shipping box (along with $89.00 that I've already paid). I can get a refund from the company but parrt of me is thinking "What if this is a fluke and the things goes dead again tomorrow?"
Has this ever happened to anyone before?Yes, it did happen to me too. Very likely that the head of the HD of your iPod got stuck that night, which caused the Sad iPod icon.
My suggestion is to do the following now (which will erase all your data on your iPod)
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iPod Updater and click “Restore”
Let it run for over weekend, if it appears the Sad iPod icon again, then send it for repairing. -
My screen shows a USB cable pointing to the ITunes icon. What is my next step? I can't do anything from there on.
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Ipod is dead, only resets and goes into disk mode
I own a 4g ipod 20gb. It had been working fine. A week ago, I put it to sleep, and when it woke up it kerp flashing the broken folder icon and then reseting. I cound not mount it. By pressing the foreward button, I would get into disk mode.
Connecting to a computer got it to say
"disk mode-do not disconnect" but it would not mount/ appear in disk utility. Somehow, I got it to finally work and formatted and reset the firmware on a friends windows comp. It worked fine once, then the same thing happened. After taking it off my mac, it will say "ok to disconnect" and freezes there
anyone have a sugestion?
ps...I got it replaced a month ago in warrenty, but now that is up. Can I still send it back (warranty on the replacement?) thanxHello,
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/ipod/download/
http://www.apple.com/itunes/download/
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iPod Updater and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iPod Updater and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“Partition Magic”.
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iPod updater.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921�
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call. -
Ipod generation 1, updated ipod software version 5.1.1 and now my ipod is dead..
I have an ipod generation 1 since 2005 and it works perfectly till yesterday when i receive a prompt from iTunes store (after my last login 6 months ago) reminder/alert to update my ipod software version to 5.1.1 in which i did and just after i updated the software my ipod went dead..
The message appeared "Please Wait..Very low battery.." However, when i plug it into adapter charger i'll see the normal screen, but the message appear when i use the cable to connect to my lappie....Urgent help! Thanks.You need to continue with the Recovery...
Once the Device is in Recovery Mode... it is too late to save anything...
To minimise loss... After the successful Recovery... Restore from the most recent Backup...
Restore from Backup
http://support.apple.com/kb/ht1766
Maybe you are looking for
-
is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin
-
How do I get ALL the info records for a materials plants using an SAP FM?
I need to get all of the info records from the EINE table for a material - all of its sites (plants, we are using SAP retail). The problem is this: I call the FM MD_INFORECORDS_READ - here is the code for my call: CALL FUNCTION 'MD_INFORECORDS_READ'
-
How to read data from INVFO structure
Hi Guys, Can anybody tell me how to get the Data from INVFO structure for field ZUONR as I have to assign it into from BSEG-ZUONR field. using FI Assignment technique. so can anybody tell me any table where INVOF-ZUONR are stored in FV60
-
TS3899 Since I updated my iphone, I am not receiving email on my .mac account. What's wrong?
Since I updated my iphone to I0S6, I am not receiving email on my .mac account. What's wrong?
-
Boot camp files do not show in Mac following Windows restore
I am trying to increase the size of my boot camp partition (using Winclone to create an image). This is my stupid messing around which created the problem: I had previously tried changing the partition sizes, repartitioning my HD: making windows bigg