Next steps after install of solaris10

Hi as I,m new to solaris10 having only used windows i,m a little stuck. Having got solars up & running with help from the forums i need to move on. I would lke to run various programs eg word/ a image program etc, do any of these come with solaris package if so how do i find them / where are they? i know this is very basic stuff but is impossible if u dont know the next steps to take.
If there is a tutorial i am wiling to learn

hi spiky001
Welcome to Solaris.
yes, mozilla is not installed on Solaris you have to download it from the web and then install it.
You can log on to or ftp to sun's site [www.sunfreeware.com] with username as anonymous and password as your valid email id.
You can download loads of stuff from there.
Edited by: hiteshthappa on Aug 15, 2009 4:17 PM

Similar Messages

  • What is the next step after editing or triming a video ? What type of file format to save and what to do after that ?

    what is the next step after editing or triming a video?
    what type of file format should be save and what to do after that?

    In the early days of digital video editing, an export render could take hours!  Not many applications are as hard on system resources as video editing, and rendering the final edit is probably the most system intense action of all.  
    Head on over to the Premiere Pro Hardware forum to see what sort of computer hardware the pros use for NLE (non linear editing), or to the PPBM5 site for a better look.
    PPBM5 Benchmark
    Also check out the specs on the Video Guys website

  • What is the Next Step after MCSE

    I need to know what is the Next Step after MCSE massaging ?
    and what is the top certificate in Microsoft

    Hey Mohamed,
    I agree with Danny, he explained perfectly. 
    MCSE Certification is the highest in servers, DB, etc. .. (except from Office where different certifications)
    MASTER degree have now only for Microsoft Office. 
    See all qualifications for office following link 
    https://www.microsoft.com/learning/en-us/office-certification.aspx 
    Or details of the MASTER link 
    https://www.microsoft.com/learning/en-us/mos-master-certification.aspx
    Please Mark This As Answer if it helps to solve the issue
    Tzuri Ben Ezra | My Certifications:
    CompTIA A+ ,Microsoft MCP, MCTS, MCSA, MCITP
    |
    FaceBook: Tzuri FaceBook | vCard:
    Tzuri vCard | 
    Microsoft ID:
    Microsoft Transcript 
     |

  • What is the next step after ABAP ? Need resources for SAP structure

    Hello,
    I have learned ABAP and now it is time to use it to write SAP programs. But what is the next step?
    From where can I get information about SAP tables to proceed?
    I have 2 ABAP books but they only provide the syntax for ABAP. After learning that, I am finding trouble in knowing on which objects/tables to apply it on.
    For example, I want to know that when I use the CV01n to create a file, what happens in terms of internal SAP tables?
    If I select multiple files in the search result "CV04N" which table should I access to get these selected files?
    Basically does anyone know where I can find such resources in order to understand how to proceed in developing SAP application ?
    Regards.

    Hi HASSAN,
        For Learning the Business part of  ABAP, (That is what is missing for you i.e the tables and their relations), i would suggest you to take one module at a time.
    Like MM(Material management) or SD(Sales and distribution) etc.
    Refer this link to know the business part of the SAP:
    MM:
    http://help.sap.com/saphelp_47x200/helpdata/en/96/df293581dc1f79e10000009b38f889/frameset.htm
    SD:
    http://help.sap.com/saphelp_47x200/helpdata/en/dd/55f33e545a11d1a7020000e829fd11/frameset.htm
    Regards,
    Ravi

  • What should be the next step after certification+internship?

    Hello!
    I cleared my SAP ABAP Certification in February 2014.
    The SAP Partner institute from which I completed my training as well as certification, are offering me an internship for 6 months.
    I'm currently working in Localisation since a year, but I have programming as a major in my academics.
    Also, I have a little background of Java Programming before joining this localisation company.
    After this internship, what should I keep in mind to search for a job in SAP ABAP?
    Also, will this internship increase the chances of my employ-ability in the world of SAP?
    I'm confused about taking my next steps.
    Please help!
    Regards,
    Ashutosh.

    Internship definitely help your chances since you are getting real time experience. It is a good opportunity that you got now to get into SAP. It is not really easy for a fresher to get a job in SAP field only by certification. If you plan your career in SAP, then this is the time to make that move.

  • What's the next step after the rebate settlement running?

    I had created the final settlement for the some rebate settlements via vb(7,so what's the next step for it? Is it going to be routed to the financial side for the next amount payment?Please advise.

    You need to create a rebate credit memo request "Standard Document Type B1". It is created automatically while settling rebates.
    Just check if any sales document of type B1 has been generated? Go to VBO2 under menu 'Rebate Payments' you will see 'Credit Memo Request', if you are able to click on the Change/Request that would mean rebate credit memo request has been created.
    If not change the Agreement status in control data to 'B' and click on execute settlement. In the next screen enter the amount for which you want to create rebate memo and save.
    This would generate rebate credit memo request if all customizing is correct. Either case you will get a message.
    Now this credit memo request needs to billed as a normal sales order and if all SD-FI integration settings are correct this would also completes your rebate process.
    Sudhir

  • Migrating large project from DSC 7.1 to LabView 2009 Shared Variables ... What's the next step after recreating my variables?

    I am in the process of migrating a large distributed (multi-workstation) automation system from the LabVIEW 7.11 DSCEngine on Windows XP to the LabVIEW 2009 Shared Variable Engine on Windows 7.
    I have about 600 tags which represent data or IO states in a series of Opto22 instruments, accessible via their OptoOPCServer. There are another 150 memory tags which are used so the multiple workstations can trade requests and status information to coordinate motion and process sequencing.  Only one workstation may be allowed to run the Opto22 server, because otherwise the Opto22 instruments are overwhelmed by the multiple communications requests; for simplicity, I'll refer to that workstation as the Opto22 gateway.
    The LabVIEW 2009 migration tool was unable to properly migrate the Opto22 tags, but with some help from NI support (thank you, Jared!) and many days of pointing and clicking, I have successfully created a bound shared-variable library connecting to all the necessary data and IO.  I've also created shared variables corresponding to the memory tags. All the variables have been deployed.
    So far, so good. After much fighting with Windows 7 network location settings,  I can open the Distributed System Manager on a second W7/LV2009 machine (I'll refer to it as the "remote" machine henceforth) and see the processes and all those variables on the Opto22 gateway workstation. I've also created a few variables on the remote workstation and confirmed that I can see them from the gateway workstation.
    Now I need to be able to use (both read and write) the variables in VIs running on the remote workstation machine. (And by extension, on more remote workstations as I do the upgrade/migration).
    I have succeeded in reading and writing them by creating a tag reader pointed at the URL for the process on the Opto22 gateway. I can see a way I could replace the old DSC tag reads and writes in my applications using this technique, but is this the right way to do this? Is this actually using the Shared Variable Engine, or is it actually using the DataSocket? I know for a fact that attempting to manipulate ~800 items via Datasocket will bog down the systems.
    I had the impression that I should be able to create shared variables in my project on the remote workstation that link to those on the Opto22 gateway workstation. When, however, I try to browse to find the processes on that workstation, I get an error saying that isn't possible.
    Am I on the right track with the tag reader? If not, is there some basic step I'm missing in trying to access the shared variables I created on the gateway workstation?
    Any advice will be greatly appreciated.
    Kevin
    Kevin Roche
    Advisory Engineer/Scientist
    Spintronics and Magnetoelectronics group
    IBM Research Almaden

    I have found the answer to part of my question -- an relatively easy way to create a "remote" library of shared variables that connect to the master library on my gateway workstation.
    Export the variables from the master library as a csv file and copy that to the remote machine.
    Open the file on the remote machine (in excel or the spreadsheet app of your choice) and (for safety's sake) immediately save it with a name marking it as the remote version.
    Find the network path column (it was "U" in my file).
    replace the path for each variable (which will be either a long file path or a blank, depending on the kind of variable) with \\machine\'process name'\variable name
    where machine is the name or ip address of the master (gateway) workstation (I used the ip address to make sure it uses my dedicated automation ethernet network rather than our building-wide network)
    and process name is the name of the process with the deployed variables visible in the Distributed System Manager on the gateway machine.
    NOTE the single quotes around the process name; they are required.
    The variable name is in the first ("A") column, so in Excel, I could do this for line 2 with the formula =CONCATENATE("\\machine\'process name'\",A2)
    Once the formula worked on line 2, I could copy it into all the other lines.
    Save the CSV file.
    Import the CSV into the remote library to create the variables.
    Note: at this point, if you attempt to deploy the variables, it will fail. The aliases are not quite set properly yet.
    Open the properties for the first imported variable.
    There is probably an error message at the bottom saying the alias is invalid.
    In the alias section, you'll see it is set to "Project Variable" with the network path from step 4.
    Change the setting to "PSP URL" with the same path and the error message should disappear.
    Close the properties box, save the library, and then export the variables to a new CSV file.
    Open the new CSV file in Excel, and scroll sideways to the NetworkrojectBound field.
    You'll notice it is False for the first variable, and true for the rest. Set the field FALSE for all lines in the spreadsheet.
    Scroll sideways... you'll notice there are two new columns between NetworkrojectPath and Network:UseBinding
    The first one is NetworkingleWriter; it should already be FALSE for all lines.
    The second one is Network:URL. That needs to be set equal to the value for each line of NetworkrojectPath.
    You can accomplish this with a formula like in step 4. In Excel it was =U2 for line 2, and then cut and paste into all lines below it.
    There is a third new field, Path, which should already be set to the location of the variable library. You don't need to do anything with it.
    Save the edited CSV file.
    Go back to the remote library, and import variables from the just-edited remote library CSV file.
    Once you have imported them and the Multiple Variable Editor opens, click on done.
    You should now be able to deploy the remote variable library without error. (Make sure to open the Distributed System Manager and start the local variable engine. It took me a few failures before I realized I had to do that before attempting a deployment).
    Voila! You now have a "remote" library of shared variables that references all the shared variables on the master machine, and which should be deployable on other machines with very little difficulty.
    It actually took longer to write out the process here than to perform these steps once I figured it out.
    Kevin Roche
    Advisory Engineer/Scientist
    Spintronics and Magnetoelectronics group
    IBM Research Almaden

  • What is the next step after I repair Disc Utility

    I have just finished repairing Disc Utility.  I don't know which option to hit next?  "Erase" "Raid" "Restore" etc ?

    Was Disk Utility able to repair the disk? If so, you can simply quit Disk Utility.

  • Configuration Wizard failed at 8th step after installing sp3 patching in Moss 2007

    Hi
    While running in the config wizard it failed at 8th step please give me some suggestion on this
    [SPManager] [ERROR] [2/9/2014 8:18:52 AM]: ReflexiveUpgrade [SPServer Name=***** Parent=SPFarm Name=SharePoint_Config] failed.
    ] [ERROR] [2/9/2014 8:18:52 AM]: Logon failure: unknown user name or bad password. 
    [SPManager] [ERROR] [2/9/2014 8:18:52 AM]:    at Microsoft.SharePoint.Search.Administration.MSITLB.IGatherManagerAdmin.SetDefaultAccount(String bstrAccount, String bstrPassword)

    Hi Myprofile,
    Logon to the front end server with the Farm admin account then
    try this from an administrative command prompt
    cd "c:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\BIN"
    then at the
    c:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\BIN\
    run
    psconfig -cmd upgrade -inplace b2b -force
    Cheers,
    Stacy Anothersharepointblog.blogspot.com

  • HT201250 When I have completed the restore process , the computer asks me to restart , I have done this but it just cycles around for 15 minutes and asks me to restart again . What's the next step after this ?

    When I have completed the restore process , the computer asks me to restart the computer. When I do there it cycles for 15 minutes and then asks me to restart again. What should I do next ?

    See #E8 in Time Machine - Troubleshooting.
    Also . . . an update was released the other day, to fix some sort of restore problem (we don't know just what).  Run Software Update or download it from here:  http://support.apple.com/kb/DL1505

  • Transferring music to new mac air using external drive: next steps after copying iTunes file to music folder?

    I've followed instructions to consolidate, copy to external drive, then copy iTunes folder to Music folder on new mac air.  so...
    1. what do I do with original iTunes folder?
    2. how do I get iTunes to read/ingest playlist and songs?

    Exactly what steps did you follow?
    1. what do I do with original iTunes folder?
    It's on your old computer.
    What do you want to do with it?
    2. how do I get iTunes to read/ingest playlist and songs?
    If you copied the entire /Music/iTunes/ folder from old computer to /Music/ on new computer then you simply need to open iTunes.
    Since it is the exact same library, everything will be there as it was on old computer.

  • Next steps after safe mode reboot?

    I followed the suggestions of the community and was able to restart my mac pro laptop in "safe mode."
    After removing some files I thought might be problematic via "secure empty trash" I attempted to restart the mac.
    Unfortunately, now it only restarts in "safe mode" which blocks me from using wifi.
    Are there any utilities or programs I can run to check for corrupted files?
    Thanks,
    jae

    Read this: http://support.apple.com/kb/HT1564?viewlocale=en_US

  • How do I do to update? Whats the next step after downloading the files ?

    I have a Acer Aspire one with Linux from the beginning. I want to update Firefox because for example Youtube does not support it anylonger. I can download the files for updating, but then? What shall I do with the files?
    I am Swedish so if anyone in Sweden can explain it is maybe better.
    Best regards
    Gunnar Norén [email protected]

    Chances are that old version of Fedora from 2008 won't support the newest versions of Firefox. Check the system requirements for the two versions which are currently supported. <br />
    http://www.mozilla.com/en-US/firefox/5.0/system-requirements/ <br />
    http://www.mozilla.com/en-US/firefox/3.6/system-requirements/
    If you don't understand the requirements for Linux on those pages, try the Acer - Linux forums for help or a Linux forum, to find out what the latest version of Firefox that will work on that older operating system. I had a similar situation with my ASUS EeePC 900 netbook a few years ago, and ended up installing a much newer version of Ubuntu called Easy Peasy, so that I could install a new version of Firefox. I was stuck with a Firefox 2.0.0.x version myself.

  • What is the next step after I signed my jar ?

    Hello,
    I've signed my jar.
    It works but still display before this message :
    "The application digital is invalid. Do you want to run the application"
    if I say OK, it works but I would like to avoid this "not very funny" message.
    I know I have something more to do and related to certificates but to be honest I'm a little bit lost...
    Any help are welcome. :o)
    Thanks in advance,
    Mangeur de foin

    Re,
    Just to add :
    I checked with : jarsigner -verbose -certs -verify myjar.jar and the answer is "jar verified".
    And I can access local directories once the jar is launched.
    Mangeur de foin

  • What is the next step after i purchase itunes

    I am totally lost here. Bought 2 tunes on itune but can't get them to my phone. I want to make ringtones from this music. Help

    Did you check these articles? How to create and buy a ringtone for your iPhone and How to Make Custom iPhone Ringtones for Free | eHow.com or Guide: The many methods for using custom iPhone ringtones

Maybe you are looking for