Next steps when a disk is MISSING

Hi,
I'm new to ASM and wanted to check what are the steps and how it might work when a disk fails. So I removed a disk randomly from the diskgroup.
WHen I looked at the v$asm_disk. It said one disk was MISSING. Then it was taking a while to rebalance. Once that was done, the v$asm_disk does even show that disk now, its gone.
So I plugged it back in and no change in v$asm_disk and asm discover does show me this one. Since you use part of that disk for the OS partition, we had to make that partition. I would like to know what my next step is?
Should I have to use "oracleasm create disk", if so should be be the same name or what should I be doing, thanks.

oracleasm-discover and oracleasm listdisks, I see the new disk after the partitions were done with respect to the OS. But the v$asm_disk still shows me 3.
oracleasm scandisk completes and says OK, but I still dont see the new disk. Guess I will have to create the disk again. Any comments

Similar Messages

When I started my Mac the screen was white with the Apple logo and power motion icon running. I attempted to turn off Mac then a message stating "Debugger called: Button SCI . Also "Waiting for remote debugger connection." What is my next step?

When I started my Mac the screen was white with the Apple logo and power motion icon running. I attempted to turn off Mac then a message stating "Debugger called: <Button SCI>. Also "Waiting for remote debugger connection." What is my next step?

Hi , and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
And sorry to report that OSX is more Widows like than ever, but….
If that doesn't help Reinstall the OS.

Hi there. I bought and downloaded photoshop elements 13 today. When I tried to set it up and was prompted for the serial number, the one I was given and subsequently entered ( correctly ,I checked numerous times) was seems invalid. What's the next step?!

hi there, I bought and downloaded Adobe photoshop elemts 13 today. When trying to set it up, I was prompted for the serial number which upon being entered was deemed invalid. I know the serial number is the correct one. What is the next step, how do I contact Adobe store?!?

Error "The serial number is not valid for this product" | Creative Suite
if that doesn't help, contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

Iphoto 9.4.2 quitting when pressing info - next steps?

After uploading a batch of new photos, I pressed the info button for one of the photos and iphoto quit unexpectedly. I have 25,000 photos in my iphoto library.
I tried the following:
1) Repairing permission and database using the 'first aid' function.
After trying this, the problem was worse ie iphoto now quitting - a second or two after opening.
2) Created a second iphoto library - that worked fine using iphoto.
3) Opening my photos Aperture. Also worked fine.
4) Rebuilding the library using the 'first aid' function - this improved the situation. iphoto no longer quits on opening BUT it is still quitting when I press the info button - so back to square 1!
Ideally I would like to merge my iphoto library with my Aperture library - but don't want to make matters worse by merging a dodgy library with a good one. I would rather repair the iphoto library first if possible.
I have backed up onto an external drive.
Any suggestions for next steps would be appreciated.
Thanks
iPhoto '11, OS X Mountain Lion (10.8.2)

Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

In the installation process lion will not install as message reads MAC HD 904 gb available this disk is used for time machine backups .What is the next step

After downloading ,completing the lic agreement phase, the next step is where to install and automatically' MAC HD with 904 gb available this disk is used for time machine backups' is shown and installation is blocked .
Any body got any idea what to do next ?

Time machine needs its own partition to operate. So you are not going install a OSx Lion on that volume.
If there is enough room you may be able to partition the drive on the fly with DiskUtility
Are you saying you clean installed Lion and you are trying to move your user Data over with TM via the migration Assistant? Please explain.

I was loading some CDs into my iTunes library when the disk drive refused to "suck in" the next CD. Does anyone have a suggest on how I might proceed?

I was loading some CDs into my iTunes library when the disk drive refused to "suck in" the next CD. Does anyone have a suggest on how I might proceed?

Yes, that is a Catch 22. If you have another Mac you can connect your Mac to it in the Target Disk Mode, Transferring files between two computers using FireWire, and use Disk Utility on the second Mac to try to run the Hardware Test from there. Not sure if it's possible to a connected Mac though.
You can try this several times in the Terminal app and then see if a disk can be fully inserted:
Enter the following command followed by the Enter or Return key:
drutil eject
Do it several times and then try another disk. (A long shot).

HT201441 Hi I bought a second-hand phone iphone4, I update the software when you want to activate the phone asked for my registration icloud I do not know what is the password for this registration, can you tell me how to go to the next step without such

Hi I bought a second-hand phone iphone4, I update the software when you want to activate the phone asked for my registration icloud I do not know what is the password for this registration, can you tell me how to go to the next step without such registration in icloud
my ICCID is 8935905000307066111

Unfortunately, you cannot do very much with your phone unless you get assistance from the previous owner, they should either provide you with the password to unlock it or remove their account from the phone entirely remotely through iCloud.com > Find My Phone.

I keep getting an error message when I try to sync my iPod that says "the required disk is missing". I don't have a clue what they are asking for..

I keep getting an error message when I try to sync my iPod that says "the required disk is missing". I don't have a clue what they are asking for..

Try deleting the iPod Photo Cache folder. If location can be found here:
iTunes: Understanding the iPod Photo Cache folder

When I try to delete my site, I enter my information to confirm my identity. The confirm widow freezes, and does not go to the next step. What can I do, please?

When I try to delete my site, I enter my information to confirm my identity. The confirm widow freezes, and does not go to the next step. What can I do, please?

Hi,
Did you try any other browser? is it hosted on Business catalyst? If yes and if you are using custom domain, then login to admin panel using system domain (mysite.businesscatalyst.com) and then try to delete.
Let us know if that works

HT201210 Restore me when I'm trying to fill his next character . The disk you are attempting to use is full If I have 20 GB of memory.

Restore me when I'm trying to fill his next character
. The disk you are attempting to use is full
If I have 20 GB of memory.
thank you.

Hi and welcome to Apple Discussions.
Irrespective of your iTunes downloads you are going to run into serious problems with only 1GB of free space. The general recommendation on these forums is that one should have 10% free space as a minimum or 15% as an ideal.
Having as little as 1GB could result in system corruption or, at worst, HD damage. I recommend that you free up some space as a matter of urgency.
If you would like any guidance on what is safe to remove post back but a good starter, often neglected, is to empty your Trash.
Good luck,
Adrian

I think I goofed when running disk utility, and unmounted at the end and restarted. Now I can't get the disk to mount. What am I missing?

I think I goofed when running disk utility, and unmounted at the end and restarted. Now I can't get the disk to mount. What am I missing?

Which disk won't mount? What version of OS X? Your post is impossible to answer with no useful information.

I want to export a vcard from contacts but when I do it doesn't give me the next step of saving the file anywhere and if it automatically creates a file, where is it saved?

i want to export a vcard from contacts but when I do it doesn't give me the next step of saving the file anywhere and if it automatically creates a file, where is it saved?

its from icloud contacts. I select all and then go to export to a vcard and then nothing happens.

I recently changed from Windows XP to Windows 7. I am trying to download iTunes to Windows 7 but when I do so, it is only saved. What is next step?

I recently changed from Windows XP to Windows 7 and am trying to download iTunes to Windows 7. When I do that , the download is saved. What is next step?

Run the installer... as with any other installer on Windows, double-click on the file to launch it.

Issues with MacBook hard drive - next steps to take?

Hello,
I have a 15-inch MacBook Pro that I purchased in early 2010 which came with Snow Leopard, later upgraded to Mountain Lion. The other day my machine completely froze up during run-of-the-mill web browsing. When I tried to manually restart, I got stuck on the gray Apple screen with the rotating circle for over an hour. I haven't been able to boot regularly since. I tried resetting the PRAM - nothing.
I tried booting to the Recovery drive, which worked at first, but when I would run Disk Utility, the Macintosh HD drive would suddenly randomly disappear from the Disk Utility sidebar during Verify or Repair operations, and then the system would just hang/freeze. Now I can't boot into Recovery at all - it just hangs on the gray Apple screen. I tried booting from a Snow Leopard install DVD and Disk Utility does the same thing - recognizes Mac HD at first, but it disappears from Disk Utility when I try to do anything.
I tried using a Diskwarrior DVD, and Diskwarrior does not recognize the hard drive at all - it only sees the Diskwarrior DVD.
When I boot into single user mode and run fsck -yf it says everything is OK. If I press Option while booting both Mac HD and Recovery show up, but I can't get into either anymore.
I opened up my laptop to make sure everything looked okay, and aside from a little dust, the HD cable seemed secure and connected.
I have some stuff on my HD that isn't backed up that I would like to be able to recover. So what would the next step be? I'm not sure if this is a failed HD issue or a failed cable issue. Should I buy an enclosure for my HD and see if I can get it going externally? Would that be the best way to see if it is the drive and not the cable? An enclosure is cheaper than buying a new SATA cable, so I'm hoping that's where I can start.
Thanks in advance for any advice.

nodel9999 wrote:
Should I buy an enclosure for my HD and see if I can get it going externally? Would that be the best way to see if it is the drive and not the cable? An enclosure is cheaper than buying a new SATA cable, so I'm hoping that's where I can start.
Yes. See if the HDD will boot the MBP via a USB connection. You should probably have an external HDD for backups or a possible replacement of your boot drive.
Ciao.

What is the next step after ABAP ? Need resources for SAP structure

Hello,
I have learned ABAP and now it is time to use it to write SAP programs. But what is the next step?
From where can I get information about SAP tables to proceed?
I have 2 ABAP books but they only provide the syntax for ABAP. After learning that, I am finding trouble in knowing on which objects/tables to apply it on.
For example, I want to know that when I use the CV01n to create a file, what happens in terms of internal SAP tables?
If I select multiple files in the search result "CV04N" which table should I access to get these selected files?
Basically does anyone know where I can find such resources in order to understand how to proceed in developing SAP application ?
Regards.

Hi HASSAN,
For Learning the Business part of ABAP, (That is what is missing for you i.e the tables and their relations), i would suggest you to take one module at a time.
Like MM(Material management) or SD(Sales and distribution) etc.
Refer this link to know the business part of the SAP:
MM:
http://help.sap.com/saphelp_47x200/helpdata/en/96/df293581dc1f79e10000009b38f889/frameset.htm
SD:
http://help.sap.com/saphelp_47x200/helpdata/en/dd/55f33e545a11d1a7020000e829fd11/frameset.htm
Regards,
Ravi

Next steps when a disk is MISSING

Similar Messages

Maybe you are looking for