Next Syndication Date and Time changing

Hi Experts,
While setting the Outbound port to Automatic with Daily processing interval i set Next Syndication Date and Time to some value.
but after the first occurrence of syndication, Next Syndication Date and Next Syndication Time are changing to new unexpected value.
I am using MDM 5.5 SP6 version.
Please help on this.

Hi Prashant
Copying from the SAP Note 1124246-
Bug Fixes
MDM SYNDICATION SERVER 5.5
Fixed: Change for auto syndication to update next syndication time without accumulating time offsets
Please close the thread if answered.
Thanks-Ravi

Similar Messages

Date and time/ changes by itself

My date and time....well mostly my time keeps randomly changing.....any ideas?

I *may* have found a solution. I had been having the same issues with my iPhone 5 running the latest iOS (6.0). And it was changing its time AND date - and seemed to be happening both randomly AND any time I changed cell towers (I'm on Verizon) - especially if one cell tower was LTE and one was not. What I did was turn OFF the "Set Automatically" function:
Settings > General > Date & Time > Set Automatically to OFF
Then there is a feature called "Setting Time Zone" in location services.
Settings > Privacy > Scroll all the way to the bottom and you should see "System Services" > Setting Time Zone "off"
This allows your location services to still run, except for that one small part.
Not sure if this will fix your particular issue or not. But so far it is working well for me! I'll reply if aything changes.

My new Nokia Lumia 800 changes date and time after...

When i switch off and on my Nokia Lumia 800, date and time changes: from 2 september 2012 8.00 to 2 march 2013 14.00. I need help to understand this strange problem and find a solution.

chrysale wrote:
I had the same problem with my Lumia 800. The Lumia 800 kept changing time and date as soon as I switched it off and turned it back on. In my case, doing a HARD RESET helped to fix this. BEWARE! You will lose all your data!
Switch off your phone, hold Volume Down, Power, Camera buttons down. Switch phone on. As soon as it vibrates, release Power button, keep Volume Down and Camera button pressed for a few seconds.
I have the same problem and after going through all the various support sites- Nokia, O2, and endless forums I was told the same thing "Make sure your auto-update for date and time is switched to automatic" But after telling them I don't know how many times that my Lumia 800 didn't have this option, only a 24 hours switch I was told there was nothing that could be done. However I appear to have sorted it out myself. The problem appears to be (or on my phone at least) is wi-fi connection, before I turn my phone off I have to disconnect from wi-fi and when I turn the phone back on the date and time stays corrected.
When I set the date and time manually (for the 3000th time!!) I held in the power button until the slide down close screen disappeared then released it and the phone restarts, then I done it again- same proceedure just to be sure and ever since the date and time has stayed correct. BUT BE SURE TO TURN OFF WI-FI BEFORE SWITCHING PHONE OFF. Hope this helps

HT1551 Initial set up setting date and time just spins and spins..

Can't seem to get past the set up time and date on my Apple TV...it just spins and spins

Go to the Setting menu> General > Set Date&Time . It should display AUTO. Click on set Date and Time change it to MANUal and adjust the time accordingly.
As for the apple id that should be a different issue, my ATV frequenlty thinks it's in California's time zone and I have no trouble login in and out. Try going to the Apple ID site ifto you can't login there, you may have the wrong password.
Apple ID:https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/

Changing Date and Time of the Service Tickets.

Dear All,
                  I am implementing a program where i need to change the date and time of incoming service tickets which comes after 6 PM to next day 9 AM. Also if the next day is holiday then it should preset to day after tomorrow's 9 AM.
                  Is there any std. FM to present for this? How should i take care of the Holidays coming. Kindly give a brief idea about the scenario and how the above mentioned functionality can be implemented.
                  Rewards Points for all helpful answers.
Regards,
Vinayak

Hey Vinayak,
I had similar requirement... i had almost fulfilled the requirement but till then the project got scrapped...
I will give you the brief idea on how to go about the whole thing....
You can use this FM to satisfy your requirement.....
CALL FUNCTION 'HOLIDAY_GET'
        EXPORTING
          holiday_calendar           = 'XH'
          factory_calendar           = 'XF'
          date_from                  = lw_frm_date
          date_to                    = sy-datum
        TABLES
          holidays                   = lit_holidays
        EXCEPTIONS
          factory_calendar_not_found = 1
          holiday_calendar_not_found = 2
          date_has_invalid_format    = 3
          date_inconsistency         = 4
          OTHERS                     = 5.
For this you need to create factory calendar and holiday calendar.....This can be done in SPRO path.. Just search for the keywords in SPRO IMG....
You need to do some coding for this and use FM CRM_ORDER_MAINTAIN followed by CRM_ORDER_SAVE to get this thing done which will eventually change the end date of the ticket....
I think you are well briefed on how to go about it from now.....
Inspire ppl by rewarding...
Regards,
Anand..

Envy 5660 - how to change date and time

During installation I thought I had selected the correct date and time. That didn't happen. After installation is completed how can I make these changes?
This question was solved.
View Solution.

Hey @Americanpioneer,
Welcome to the HP Support Forums!
I understand that you would like assistance setting the date and time on your HP ENVY 5660 e-All-in-One Printer. I would like to assist you today with properly configuring these two settings. Please follow the steps below to configure your date and time.
With the printer powered on, use your finger to scroll to the left on the touchscreen (like a cellphone) and you will see Setup
Touch Setup to access the Setup menu
Next, touch Preferences
Under Preferences you will now see Date & Time
Touch Date to change the date on your printer
Touch Time to change the time on your printer
Please let me know if these steps resolve your issue. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

How can i change date and time after importing a file

hello
i'm importing AVI files first in iMovie because Final doesn't support (other question i put in) but when i see the scenes form 1993 they have the date 2004.
i believe 2004 is the date i put them on the computer.
Now i looked in the help files Final Cut Pro but cant find anything to adjust the date and time.
it works well in iMovie using the help files:
Right-click the clip you wish to edit and click Adjust Clip Date and Time from the menu that appears. Or click on Archive and than adjust date and time
But as i said i cant import the files in FCP have to import them to iMovie files adjust the date and than import to Final Cut Pro but than de changes i made to the date and time are gone and in FCP 2004 is again the date of the file!!!
Question how can i Change in Final Cut Pro the date and time in a same way as iMovie does?
Jemajoro

OK, I think I understand what you are saying but it still does not look like it is doing it as you describe.
Here is another screen shot.
Note that all clips in "2007 August" event have the date of Aug x, 2007.
Yet, the event "2007 August" still shows up under the 2012 "folder" (is that the right terminology?).
The newest clip in this event is Aug 31, 2007 so shouldn't it be categorized as 2007 and not 2012?
I think you know this but I am using the following feature:
Go to the sprocket icon under the events.
Select "Group events by date" and then by "group events by year and month"
Thanks again for all the help

My iMessage for my Macbook Air is not working. It says no delivered with a red ! next to it. I have tried serval different options on trying to get it to work to include logging out of iCloud and checking my date and time. I have done about everythin

My iMessage for my Macbook Air is not working. I have updated everything. My system is running on OS X Yosemite Version 10.10. When I go to send a message, it says no delivered with a next to it. I have tried serval different options on trying to get it to work to include logging out of iCloud and checking my date and time and updating FlashPlayer. I have done about everything I can think of. Any help would be greatly appreciate!

Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread.

How do I change the "Set Date and Time Automatically" server

Is there a way to change System Preferences/Date & Time/Date & Time/Set date and time automatically from "Apple Americas/U.S. (time.apple.com)" to another time server instead?

sig wrote:
The menu has a drop down. But if you know the address of another time server I would think you can type it in.
Yeah, that's not really a menu, but a "combo box", which is a combination of an edit field and pop-up menu. So you can choose from existing items or just type in whatever time server you want.
charlie

TS4268 I changed set date and time automatically to "no" and I was able to activate iMessage. This seems contrary to all the troubleshooting discussions I've been reading.

Is there any definitive info on this subject?

When ATV is setting date and time, and hangs there, it usually indicate there isn't a network connection. Is your router still working, is the Internet for all the other computers on the same network working? Have you tried changing from WiFi connection to Ethernet or vice versa?

HT5252 I tried to change my metadata date and got this Aperture was not able to adjust the date and time of the original file "01769_p_h13ajyrm4bm0944.jpg" because it is locked or you do not have permission to modify it.

I tried to change the metadata date. It changed the date on my photo, but when I checked the box that said "also change my original file", it gave me this error message.
Unable to change original file. Aperture was not able to adjust the date and time of the original file “01769_p_h13ajyrm4bm0944.jpg” because it is locked or you do not have permission to modify it.
Wassup?

What is your Aperture version? The older versions of Aperture 3 had a problem to apply Metadata changes to the original file.
If you are using the current version Aperture 3.4.5, try to repair the permissions on your Aperture library, if you have not already done so:
Launch Aperture with the key combination ⌥⌘ held down and select "Repair Permissions" from the First Aid PAnel, that will appear.
If that does not help, post back with more information on your original files - are the referenced or managed? Where is your Aperture library located? Since when do you have this problem? And what did you do directly before noticed the problem for the first time?
Regards
Léonie

I bought my i pod touch from us but i live in india .i have been using this from many days fr just a few days before something went wrong with it and the date and time has changed what do i do?

i bought my i pod touch from us but i live in india .i have been using this from many days fr just a few days before something went wrong with it and the date and time has changed what do i do?

Have you went to Settings>General Time&Date and correct the time. Make sure the time zone is correct too. Also go to Settings>General>Inernational and make sure the Gergorian calender is selected.

How to change date and time format

Hi experts,
Can i know how to change the date and time format?
I want the date format to be dd-mmm-yyyy and time format to be hh:mm:ss
These date and time is in my sapscript form.
I make use of PERFORM function in sapscript.
This is the code in my print program.
FORM get_actlog_QA TABLES in_tab STRUCTURE itcsy
                       out_tab STRUCTURE itcsy.
   DATA: object TYPE string, "
        qaname LIKE JCDS-USNAM, "NAME for engineering process, QA Manager
        qadate LIKE JCDS-UDATE, "DATE changed in engineering process, QA Manager
        qatime LIKE JCDS-UTIME. "TIME changed in engineering process, QA Manager
DATA: lt_jcds type standard table of jcds,
      wa_jcds like line of lt_jcds,
      new_date(10) type c.
READ TABLE in_tab INDEX 1.
MOVE in_tab-value TO object.
select * into CORRESPONDING FIELDS OF TABLE lt_jcds
from jcds WHERE objnr = object
    AND ( stat = 'E0005' )
    AND inact = ''.
Loop at lt_jcds into wa_jcds.
      qaname = wa_jcds-USNAM.
      qadate = wa_jcds-UDATE.
      qatime = wa_jcds-UTIME.
   READ TABLE out_tab INDEX 1.
   MOVE qaname TO out_tab-value.
   MODIFY out_tab INDEX sy-tabix.
   READ TABLE out_tab INDEX 2.
   MOVE qadate TO out_tab-value.
   MODIFY out_tab INDEX sy-tabix.
   READ TABLE out_tab INDEX 3.
   MOVE qatime TO out_tab-value.
   MODIFY out_tab INDEX sy-tabix.
endloop.
clear wa_jcds.
ENDFORM.
This is my PERFORM in sapscript.
/:           DEFINE &V_QANAME& = ''.
/:           DEFINE &V_QADATE& = ''.
/:           DEFINE &V_QATIME& = ''.
/:           PERFORM GET_ACTLOG_QA IN PROGRAM ZFIR002
/:           USING &VIQMEL-OBJNR&
/:           CHANGING &V_QANAME&
/:           CHANGING &V_QADATE&
/:           CHANGING &V_QATIME&
/:           ENDPERFORM.
Sapscript
Prepared by : &V_QANAME& ,, &V_QADATE& ,, &V_QATIME&
The output now is
Prepared by: Name   20080312 115536
I want to change the date format to 12-MAR-2008
and the time format to 11:55:36
Can anyone please suggest on how to solve this?
Thank you.

Hi,
Before assigning the QADATE value you can write the logic to display 20080312   as 12-MAR-2008 taking the offset values .
Like
qadate = wa_jcds-UDATE.
qatime = wa_jcds-UTIME.
lw_year    = qadate(4).
lw_month = qadate+4(2).
lw_date    = qadate+6(2).
case lw_month.
when 1.
when 2.
        concatenate lw_date '-FEB-' lw_year into qadate.
when 3.
      concatenate lw_date '-MAR-' lw_year into qadate.
endcase.
READ TABLE out_tab INDEX 2.
MOVE qadate TO out_tab-value.
MODIFY out_tab INDEX sy-tabix.
And you can also change the timeformat also .
then assign that value to qatime .Then
READ TABLE out_tab INDEX 3.
MOVE qatime TO out_tab-value.
MODIFY out_tab INDEX sy-tabix.
I think this helps you.
Regards,
Rajitha.

Apple Remote Desktop - how to change the date and time server ip address?

Our imacs keep getting out of synch with our Windows Active Directory server and when they do, users can no longer log into the imacs. The imacs this morning were more than 5 minutes fast, for example.
So, we have changed the date and time server on one of our imacs to our internal time server and that works fine. Now I would like to update all of the other imacs using a unix command in ARD. Can anyone tell me how to send this change? For this message, let's say our internal time server is 172.30.100.100

Not a problem. There are a number of other system and network setup commands that you might find useful at some time. From within the Remote Desktop Admin in the Send Unix Command window type:
networksetup -help
systemsetup -help
That will give you lists of the commands, including the one I posted above, with their basic syntax. They're handy to know.
Cheers.

How do you change date and time in Photos?

How do you change the date and time of photos in the new Photos app? I know how to do it in iPhoto, I'm having a problem figuring it out for the new app. I have a MacBook Pro 13" running on OS X Yosemite Version 10.10.3

Select photos
Click "Image" menu > "Adjust Date and Time..."
or
Select photos
Command + i（or "window" menu > "info")
"Double-Click" around "Date and Time" on "info window"

Next Syndication Date and Time changing

Similar Messages

Maybe you are looking for