Next to Only Export Base-level Transaction Data from BPC 7.5 NW

Hey Experts,
I've finally got a Export process configured out of Data Manager that is just about right. However, when I run it, we're getting both base-level trasnaction data and records at the parent level for 2-3 dimensions which we need to specify as "<ALL>".
Is there any way to filter or restrict the output for just the base-level members?
Thanks in advance,
Garrett

Hi Gersh,
I'm sorry, I should have been more specific. To clarify, the trouble I'm having is when Running a Data Manager package from BPC Excel, I can't select just the base level members from clicking the Member Selector and doing Refresh/Use Filter.
The system seems like it accepts this selection, but does not apply it when running the package.
Does that make sense?

Similar Messages

Remove 0 records when Exporting TXN data from BPC

BPC Experts,
I m trying to export transaction data from BPC from one MODEL , While exporting i wanted to ignore the records whose aggregated value is zero for the dimension member combination.
Where i can restrict or set , EXPORT only for SIGNED DATA <> 0.

Hi,
Performance point of view optimization is required. As i mentioned in previous post lite optimization Closes the open request, compresses without Zero-Elimination and indexes the cube, and updates database statistics for the BW Info-Cube.
As per my understanding there are no such prerequisite , but for safer side you can process all dimension of model.
Also go through the links that are shared. If you required more details you can search on forum. There are lot of threads on lite optimization.
Problem removing zeros in a model - BPC 10 NW
http://scn.sap.com/community/epm/planning-and-consolidation-for-netweaver/blog/2014/02/07/lite-optimize--a-little-guide-to-the-big-things-you-should-know
Full Optimization and Light Optimization In Detail.
BPC Light Optimize Configuration
Lite Optimize - A little guide to the big things you should know
BPC optimization performance
Light optimize in BPC 10

Base level entities data is not rollup to parent level entity for few ac's

Hi guys,
Can some one pls help me i am not able to consolidate the base level entitys data to parent level for few accounts.
remaining all accounts are consolidating to parent level entity from base level.
Accounts which are not rolling up to parent level those accounts are few flow accounts and some accounts are Dynamic accounts.
Thanks in advance............Pls revert me earliest........
Rama.

Guys this is HFM Consolidation hope there is no time balance settings in accounts attributes and we have not mentioned grouplabel to parent entity if that is the case it is as group label base entities will not aggrigate to parent entity but here few accounts are not aggrigating parent entity.
Thanks / Rama

Problem while data processing TRANSACTION data from DSO to CUBE

Hi Guru's,
we are facing problem while data processing TRANSACTION data from DSO to CUBE. data packets processing very slowly and updating .Please help me regarding this.
Thanks and regards,
Sridhar

Hi,
I will suggest you to check a few places where you can see the status
1) SM37 job log (give BIrequest name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. See if its accessing/updating some tables or is not doing anything at all.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.
You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the cube.
Thanks,
JituK

Loadind transaction data from SAP ECC 6.0 system failed

Hi!
I have SAP ECC 6.0 IDES system with the following clients:
100 DEV client
200 BI client of SAP 6.0
Now I would like to load the transaction data from InfoSources 0FI_AR_6 and 0FI_AR_4 from SAP ECC client 100.
The extraction process has been frozen in status "yellow" and after a while changed the status to "red" with the following information
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
The users BWREMOTE and ALEREMOTE seems to be ok and have the suitable authorization.
The tcode SM58 does not show any entries.
The tcode BD87 shows that the IDocs was sent (source system) and has been received on target system.
Question:
How can I solve my problem? Please give me some technical information (tcode, report).
Thank you very much!
regards

Walk through your basis set up and check out
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0751ba5-b7a8-2b10-6d97-e91e85c0fafa
pts appreciated.

Load transaction data from ECC to BPC 10.1 using US GAAP starter kit SP3

I need to understand a bit more the process to load transactional data into BPC 10.1. We have US GAAP Starter Kit SP 3. Below is an screenshot from the config guide:
It explains how transactional data can be extracted from ECC system to the SAP Netweaver BW data source 0FI_GL_10 and then transform it
to get it loaded into BPC. The Objects /PKG/FC_C01 and PKG/FC_DS01 are just mentioned here as reference because they come in the RDS for Financial Close and Disclosure Management, which not all companies have.
I believe the upwards data flow should be from Data Source 0FI_GL_10 to Data Store Object 0FIGL_O10 and then to InfoCube 0FIGL_R10. There is also a data flow that goes from 0FI_FL_10 to InfoCube 0FIGL_R10. Can anyone with experience with US GAAP starter kit answer this?
Thank you.

Hello, we were able to load actuals to our environment with the US GAAP Starter Kit, SP03. I followed the Operating Guide document up to section 5.2 and ran the Consolidation Data Manager Package with no issue. We are using the A20 Input and A20 Consolidation process flows based on flows F00, F10, F20, F30, F99, etc... According to the documentation, the Statemnet of Cash Flow and Changes in Equity should be automatically calculated and available from the changes
in Balance Sheet accounts once Consolidation is completed . However, when I ran the corresponding reports, they bring no data.
We loaded actual data for the whole 2013 and Jan 2014. Our intention is
to run the first consolidation for Jan 2014. The closing balance for period 12.2013 in flow 99 was copied to flow 00 2014 (opening balance). Flows 20 and 30 were updated with the corresponding balance sheet movements (increase/decrease), according to the delivered controls in the starter kit. However, cash flow is still showing no results.
I found the following text in the operating guide, but I am not clear if I am missing a step. Can you please clarify? This is telling me that I need to copy my 01.2014 opening balance (F00) to 12.2013 closing balance (F99, which is done by the copy opening data manager package, but in the opposite direction, from Y-1 F00 to Y F99) and in addition to also copy that balance to 12.2013 F00 (previous year opening balance)??
"5.2.2 First Consolidation
When operating the consolidation for a given Scope for the first time in the application, it is necessary to populate and process the prior year-end time period for this Scope, in addition to the first required consolidation period. This is because the flows dedicated to the scope change analysis are properly populated by the consolidation engine provided that at least one automatic journal entry has been detected in the consolidation used as opening consolidation, which by default is the prior year end (December, Y-1). To accomplish this, it is recommended that you copy all input-level opening data of the first required consolidation (flow “F00”) into the closing data (“F99”) and opening data (“F00”) of the prior year-end time period, including intercompany breakdowns.
This breakdown by intercompany in the balance sheet triggers automatic eliminations, which are carried over to the closing position. After the consolidation process, the closing data of the prior year
end time period will contain the appropriate source data for the opening data of the following consolidation, notably the opening automatic journal entries.

Pass transaction data from an InfoProvider to the BPC within BW

Hi Gurus,
I need to pass transaction data from an InfoProvider to the BPC Real-Time InfoCube, but I need to do from BW, and not from the BPC Excel interface.
The reason is that I want to make the whole process in one step, and at the beginning of the process the end-user has to introduce some parameters in the BW, as we are launching the process chain from a transaction.
Therefor I copied the process chain /CPMB/LOAD_INFOPROVIDER and tried to introduce the different parameters that are normally delivered by the prompt in the excel interface.
Can anybody help? Does anybody know what parameters for each process type have to be introduced, in what form and if all the process types are needed?
Making it with a normal BW transformation is also not an option, as we don't want to change from plan mode and stop people from planning.
It is very important for my end user to do everything in one step, without having to enter the BPC Excel interface.
Thanks in advance.
Cheers,
Àlex

Hi Frank,
I have checked and we have many processes in SM50 available for the job to use. Sometimes there are no other jobs running in the BW System except for the 2 jobs but still the 2nd job waits for the first to finish.
I did another check on transaction code SM58 in BW System. Here it shows all the transactional RFC queues that is being generated by the 2 jobs. I saw that only TRFC queues are able to execute at one time. I am not sure if this is the problem but is it possible to set the number of queues that can be executed at one time to more than 2? If yes, where can I find such a setting?
This is quite urgent as this problem causes all my jobs to end very late.
Thanks.
Shunhui.

BPC 7.5 NW: Loading transaction data from infocube

Hello, I am trying to load transaction data from an infocube into a BPC application using a package based on /CPMB/LOAD_INFOPROVIDER.
The master data (cost center and cost element) are already loaded. As they are compounded, we have added in the key the CO area (eg ID=0CO_AREA+ID)
I am facing an issue that the system ads leading 0 in front of the values of those master data comming from the cube.
So the data looks like CO_AREA00000000000cost_center.
As the data where correctly loaded in the dimensions (CO_AREAcost_center), the loading fails.
How can we remove those 'O'?
Thanks!

Hi Anton,
We use this in most of our projects; since auditing is one of the important requirements.
You should enable the auditing for selective categories only. With each transaction data entered, it will keep a log, which can increase the size a lot, and hence impacting the performance.
If you are enabling the log, you should frequently purge the audit data as well. However, you should take a backup of this and then purge it.
Hope this helps.

"Error occurs when loading transaction data from other model" - BW loading into BPC

Hi Experts,
I'm having a problem with my data loading from BW, using the standard Load InfoProvider Selections data manager package.
If I run for a period without data it succeeds (with warning) but if there is data to be extracted I get the following error:
Task name CONVERT:
No 1 Round:
Error occurs when loading transaction data from other model
model: AIACONS. Package status: ERROR
As it runs ok when there isn't data it appears there is something preventing the movements of data out of the cube itself, rather then a validation issue.
Has anyone encountered similar or have any ideas as to the problem?
Best,
Chris

Hi Vadim,
It's not specific to the transformation file as I have tried with others for the same BW cube and get the same result.
We get a warning when we try and validate the transformation file:
"Error occurs when loading transaction data from other model".
This only appears in the validation pop up and doesn't throw up any warnings about the transformation file itself. The validation log says:
Validate and Process Transformation File Log
Log creation time
3/7/2014 16:09
The result of validation of the
conversion file
SUCCESS
The result of validation of the
conversion file with the data file
FAIL
Validation Result
Validation Option
ValidateRecords = NO
Message
Error occurs when loading transaction data from other model
Reject List
I can't find any errors anywhere else.
Best,
Chris

Load Transaction Data From InfoProvider

Hi expert,
Iu2019m trying to upload transaction data from an Infoprovider (using BPC 7.5 NW)
From datamanager package I can only select the name of the infoprovider, but I cannot filter the data (I need to upload only a subset of them)
The strange thing is that when validating the corresponding trasformation file, I can see the u201CSet Selectionu201D button where to make those selection. It is a bug that I canu2019t see it in the datamanager package?
Thanks & regards
Fabiola

Hi Fabiola,
for you 2 options are there.
1. Options section of transformation file using SELECTION (eg: SELECTION=0CALMONTH,200901)
2. Maintain conversion file, in that write conversion rules to skip records
(eg: external col: 2008, internal column: *skip )
SET SELECTION what you said is, useful while validating transfromation file against infoprovider, you can select this options in order to restriction of number of records to validate.
regards,

Load transaction data from R3 (FI, CO, HR, MM...) to BPC 10 directly

Hi everyone,
Anyone know if is it possible to load transaction data from ECC (FI, CO, HR, MM...) to BPC 10 directly? There is a documment titled "How to Implement Delta Loading of Transaction Data from ECC and BW 7.3 into BPC using Delta Initialization in BPC 10NW" but only refers to load data from BW.
Thanks&Regards,
Fernando.

Hi Fernando,
BPC NW 10.0 has DM packages that allow load of Master and Transaction data directly from ECC system, but it's very limited. I.e. just a couple extractors are supported right now.
Regards,
Gersh

Loading a subset of BW Transactional data into BPC

Hello Experts
Hopefully someone can help me with a problem I have been facing.
I am running: EPM 10 SP13
Currently, we load a full set of transactional data from a staging BW cube into the BPC model. In terms of time, this is from 1990 to date.
Each evening, before the above mentioned load, we clear data in the BPC model against a specific dimension category to handle deleted data which does not come in on the flat file full load each night.
I would not like to only run this clear and load process for the last 2 years worth of data.
The 'Clear' package via a BW process chain using UJD_TEST_PACKAGE and an answer prompt setting as below works a treat:
%SELECTION%     DIMENSION:ANALYSIS||DIMENSION:BRAND||DIMENSION:CATEGORY|BW_ACTUAL|DIMENSION:CUSTOMER||DIMENSION:DATASRC|DS_ACT_BW_INPUT|DIMENSION:INDUSTRY||DIMENSION:METRIC||DIMENSION:PRODUCT||DIMENSION:RPTCURRENCY||DIMENSION:SUPPLY_SITE||DIMENSION:TIME|2012.01,2012.02,20012.03,2012.04,2012.05,2004.06,2012.07,2012.08,2012.09,2012.10,2012.11,2012.12,2013.01,2013.02,2013.03,2013.04,2013.05,2013.06,2013.07,2013.08,2013.09,20013.10,2013.11,12.2013
%ENABLETASK%     1
%CHECKLCK%     0
However, I cannot get the load run package (Load Transaction Data from BW InfoProvider UI) to pick up only 2 years worth of data.
%InforProvide%     ZBPC_11
%SELECTION%     <?xml version="1.0" encoding="utf-16"?><Selections xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><Selection Type="Selection" /><Selection Type="FieldList"><FieldID>0CALMONTH</FieldID><FieldID>0CALYEAR</FieldID><FieldID>0CHNGID</FieldID><FieldID>0RECORDTP</FieldID><FieldID>0REQUID</FieldID><FieldID>ZBPC_1</FieldID><FieldID>ZBPC_10</FieldID><FieldID>ZBPC_6</FieldID><FieldID>ZJ_DEALER</FieldID><FieldID>ZJ_DEFIND</FieldID><FieldID>ZJ_MODEL</FieldID><FieldID>ZJ_MRPSTE</FieldID><FieldID>ZJ_TYPE</FieldID></Selection></Selections>
%TRANSFORMATION%     \ROOT\WEBFOLDERS\COMPANY\S_AND_OP\DATAMANAGER\TRANSFORMATIONFILES\BW Actuals.xls
%DATATRANSFERMODE%     10
%CLEARDATA%     No
%RUNLOGIC%     No
%CHECKLCK%     No
I have tried setting the option in the EPM add-on when I run the Load Transaction Data from BW InfoProvider UI package but this results in the chain running for ages and never completing, despite their being activity in SM50. Almost like an infinite loop!
I then tried using the code in the UJD_TEST_PACKAGE script pointing to the above:
<Selection Type="Selection"><Attribute><ID>0CALMONTH</ID><Operator>1</Operator><LowValue>2020</LowValue><HighValue /></Attribute></Selection>
Does anyone know how I can set the import package to only include the last 2 years ? I have found that pre BPC 10, you could add something to the transformation file but I do not believe that is now supported.
Thanks for any guidance.
Ian

Hi Ian,
Q: Could you elaborate some more on automated this process? What do you mean by a macro to create the xml files ?
This process its for running package from excel. This document explain https://scn.sap.com/docs/DOC-32636
Q: Using your alternative suggestion of created a start routine, do you mean as part of the transformation in the BW staging area or the BPC transformation file sourcing the data manager package ?
I mean the BPC transformation file. http://scn.sap.com/docs/DOC-4230

Error while loading Transactional data from NW BW Infoprovider

Hi,
I am trying to load the transactional data using the delivered "Transactional data from NW BW Infoprovider" package and getting error message Error occurs when loading transaction data from other cube .
Below is the transformation file content
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = TAB
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=NO
CREDITPOSITIVE=YES
MAXREJECTCOUNT= 9999999999999
ROUNDAMOUNT=
*MAPPING
ACCOUNT = 0ACCOUNT
BUSINESSTYPE = *NEWCOL(NOBTYPE)
BWSRC = *NEWCOL(R3)
COMPANYCODE = 0COMP_CODE
DATASRC = *NEWCOL(R3)
FUNCTIONALAREA = *IF(0FUNC_AREA = *STR() then *STR(NOFA);0FUNC_AREA)
GAME = *NEWCOL(NOGAME)
INPUTCURRENCY = *IF(0CURRENCY = *STR() then *STR(NOCURR) ; 0CURRENCY)
PROBABILITY = *NEWCOL(NOPROB)
PRODUCT = *NEWCOL(NOPROD)
PROFITCENTER = 0PROFIT_CTR
PROJECT = *NEWCOL(NOPROJECT)
TIME = 0FISCPER
VERSION = *NEWCOL(REV0)
WEEKS = *NEWCOL(NOWEEK)
SIGNEDDATA= 0AMOUNT
*CONVERSION
Below is the Error Log
/CPMB/MODIFY completed in 0 seconds
/CPMB/INFOPROVIDER_CONVERT completed in 0 seconds
/CPMB/CLEAR completed in 0 seconds
[Selection]
InforProvide=ZPCA_C01
TRANSFORMATION= DATAMANAGER\TRANSFORMATIONFILES\R3_TD_P&L.xls
CLEARDATA= Yes
RUNLOGIC= No
CHECKLCK= Yes
[Messages]
Task name CONVERT:
No 1 Round:
Error occurs when loading transaction data from other cube
Application: ACTUALREPORTING Package status: ERROR
Does anyone had this issue before or is there something that needs to be looked in the BW delivered task ?
ANy Inpout will be appreciated.
Sanjay

Hello Guru,
Currently i am getting below error while loading costcenter master data from BW to BPC.
Task name MASTER DATA SOURCE:
Record count: 189
Task name TEXT SOURCE:
Record count: 189
Task name CONVERT:
No 1 Round:
Info provider is not available
Application: ZRB_SALES_CMB Package status: ERROR
Anybody can tell me, if i have missed anything ???
Regards,
BI NEW
Edited by: BI NEW on Feb 23, 2011 12:25 PM

What are the settings master data and transaction data from r/3 to in APO.

Hi all,
Can u suggest me ,I need to conform in apo what are the setting when transfering master data and transaction data from r/3 to APO.
frm
babu

Hi
The data get transfered from R3 to APO via CIF which is SAP standard.
Please find enclosed herewith the link which will provide you detail information regarding it.
http://help.sap.com/saphelp_scm41/helpdata/en/9b/954d3baf755b67e10000000a114084/frameset.htm
Please let us know if it helps you. Please also let us know if you have any more specific question.
Thanks
Amol

CIF of transaction data from ECC to APO

Hi,
I wanted to know where we maintain the configuration for real time transfer of transaction from ECC to APO.
I know for master data we have an option in CFC9 for real time/periodic transfer. Is there any similar config for transaction data too like sales orders etc.

Hi Alok,
To allow online transfer of changes to transaction data from SAP R/3 to SAP APO, you have to activate generally the BTEs in SAP R/3.
This is done in R/3. This is the path:
SPRO --> Integration with Other SAP Components --> Basic Settings for the Data Transfer --> Change Transfer --> Change Transfer for Transaction Data --> Activate Online Transfer Using BTE
You can read about it here:
Change Transfer for Transaction Data - Integration via APO Core Interface (CIF) - SAP Library
Then of course you will need to generate and actiave your IModels.
Kind Regards,
Mariano

Next to Only Export Base-level Transaction Data from BPC 7.5 NW

Similar Messages

Maybe you are looking for