Next version of SOA suite

Can anyone shed any light on when the next version of SOA suite might be released ?
Rough timescales would be helpful for us to decide in planning when to upgrade, and to which version.
Regards,
Toby

We have made this question many, many times before. However, I see that Oracle has a policy where they do not comment on release dates on the forum.
I agree with Toby about the need for architects to be aware of the comming releases.
I was told that SOA Suite 11g is already in advanced stages of development (maybe even on beta version), but the only info I can find on OTN is this whitepaper telling about the general archictecture aspects of the SOA platform:
http://www.oracle.com/technology/tech/standards/pdf/next-generation-soa-infrastructure.pdf
I hope Oracle soon release a "technology preview" of the next release.
Denis

Similar Messages

  • Can I install two versions of SOA suite using same Oracle database

    Condition:
    I installed Weblogic server(10.3.5) and SOA Suite(11.1.1.5), and
    I used RCU 11.1.1.5 to create the schemas(Oracle DB 11g-111170) for it.
    Plan:
    Now I plan to install another Weblogic server(10.3.6) and SOA Suite (11.1.1.6)
    and I will used RCU 11.1.1.6 to create the schemas for it.
    Question:
    Can I use same database(Oracle DB 11g-111170) for the two versions of SOA Suite? that is
    Can I Run the RCU 11.1.1.6 to create the schemas for SOA Suite (11.1.1.6) on the oracle database server I already used for SOA Suite 11.1.1.5?
    If I can use same database for the two versions of SOA Suite, how can I resolve schame name conflict?

    Hi
    1. YES. You can absolutely use SAME DB to have multiple Versions of SOA Schemas.
    2. Any SOA/BPM will need basically 4/5 schemas like SOAINFRA, MDS, ORABAM, ORASDPM etc. based on what you choose. And each of these Schemas can be Prefixed. Default prefix is like DEV, so schemas are like DEV_SOAINFRA, DEV_MDS etc
    3. Very Simple. When you Run RCU 11.6 and give the same old db details, in next screen it will automatically show the new Prefix for the schemas it will create. If DEV is used, it will show DEV1 like that. So just choose a Different Prefix and you are good to go.
    I have the same thing on my side. Single Database. Multiple RCU for SOA 11.5 and SOA 11.6 with different Prefixes:
    SOA 11.5 -> DEV115_SOAINFRA, DEV115_MDS, DEV115_ORABAM etc
    SOA 11.6 -> DEV116_SOAINFRA, DEV116_MDS, DEV116_ORABAM etc
    I Used the Prefixes like DEV115, DEV116 so that I know exactly which version of RCU schema they refer to.
    For QC, UAT, PROD we used prefixes like QC_*, UAT_*, PROD_* etc.
    NOTE: When you drop the schemas for some reason, make sure to give the appropriate prefixes so that only they are dropped and not others.
    Thanks
    Ravi Jegga

  • Latest version of SOA Suite released for customer

    What is the latest version of SOA Suite released for customer? Where I can find the documentation of the release?

    The latest release is SOA Suite 10.1.3.4.
    http://www.oracle.com/technology/software/tech/soa/index.html
    You should use the latest MLR#5 with it.
    http://www.oracle.com/technology/products/ias/bpel/htdocs/bpel_release_archive.html

  • Best-practice on versioning a soa suite-application

    Hi everyone,
    I recently organised a seminar for customers concerning the Soa Suite Stack and one of the interesting questions asked that day was a versioning-question.
    Let's say we've build a bpel/esb application interacting with different external and internal webservices and we've deployed this application to our production environment and we need to change an internal web service.
    How can we add versioning to this heterogenous system in a consistent way? I know you can tell esb which version of the bpel process it needs to use, but what about the custom and external webservices that we've integrated with?
    My 2 cents: You need to add a versioning-tag to you custom web services that you need to manage yourself, and use this versioning tag in the services your integrating with.
    Could somebody point me out what best practice is, or what Oracle's development team is working out regarding versioning systems for SOA-applications?

    Marc,
    Are you saying versioning isn't supported in ESB now? I thought that ESB already uses the versioning tag from bpel when you're integrating bpel and esb?
    During the development of my demo I've seen that the version-tag was used when invoking the bpel process through a soa service.

  • Dynamic JNDI in SOA Suite 11g

    Hi,
    i have a urgent requirement for my project using SOA Suite 11g,
    and i have a problem in passing dynamic JNDI
    to the database adapters (eis/DB/...).
    say that i have 2 connections,
    eis/DB/conn1, and eis/DB/conn2
    how to switch this information dynamically in the bpel orchestration
    and supply it to the db adapter.
    since when using wizard we supplied it statically.
    I notice that this problem seems to be answered in
    this thread:
    Thread: How to externalize JNDI name (setting JNDI name dynamically)
    How to externalize JNDI name (setting JNDI name dynamically)
    but when i tried it (using WS-Adressing substition) it doesnt
    work in this newer version of SOA Suite (11g)
    So how we can solve this in SOA Suite 11g
    Thank you...

    Hi,
    you don't need to change the resource adapter connection just change the (xa) datasource in the eis name
    I know with the mediator I can assign a new datasource by setting the jca.db.xadatasource property and still use eis/DB/conn1
    hope this helps
    Edwin

  • Error while deploying BPEL into Oracle SOA Suite

    Hi All,
    I am facing an issue while deploying my bpel project into Oracle SOA Suite. Please find the following error log
    BUILD FAILED
    D:\jdevstudio10135\jdev\mywork\FirstApplication\WelcomeProjct\build.xml:78: A problem occured while connecting to server "localhost" using port "8888": bpel_WelcomeProjct_1.0.jar failed to deploy. Exception message is: ORABPEL-05215
    Error while loading process.
    The process domain encountered the following errors while loading the process "WelcomeProjct" (revision "1.0"): null.
    If you have installed a patch to the server, please check that the bpelcClasspath domain property includes the patch classes.
    at com.collaxa.cube.engine.deployment.CubeProcessHolder.bind(CubeProcessHolder.java:285)
    at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(DeploymentManager.java:804)
    at com.collaxa.cube.engine.deployment.DeploymentManager.deploySuitcase(DeploymentManager.java:670)
    at com.collaxa.cube.ejb.impl.BPELDomainManagerBean.deploySuitcase(BPELDomainManagerBean.java:445)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
    at com.evermind.server.ThreadState.runAs(ThreadState.java:620)
    at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
    at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
    at DomainManagerBean_RemoteProxy_4bin6i8.deploySuitcase(Unknown Source)
    at com.oracle.bpel.client.BPELDomainHandle.deploySuitcase(BPELDomainHandle.java:317)
    at com.oracle.bpel.client.BPELDomainHandle.deployProcess(BPELDomainHandle.java:339)
    at deployHttpClientProcess.jspService(_deployHttpClientProcess.java:376)
    at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
    at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:453)
    at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:591)
    at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:515)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
    at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
    at java.security.AccessController.doPrivileged(Native Method)
    at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
    at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
    at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
    at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
    at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
    at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:595)
    Total time: 2 seconds
    I am using JDevelpoer 10.1.3.5 and SOA Suite 10g. Please help me to figure it out.
    Thanks

    Make sure you use the similar version of soa suite and JDev 10135. If you are using JDev 10.1.3.5, your soa suite version should be 10.1.3.5. I was just wondering if you were ever able to deploy any other process successfully from the similar JDev and on similar SOA Suite ? If not you need to revisit your soa suite installation again.
    Also check the log files on the server to see if any errors are recorded.

  • Advice on best way to setup Disaster Recovery for SOA Suite 10.1.3.4

    Hi Everyone,
    I need some advice on the best way to setup Disaster Recovery for a SOA Suite 10.1.3.4 install deploying JSF/ADF OC4J applications.
    The way we are trying to do it at the moment is manually copy the "applications" and "applications-deployments" folders for the OC4J application on the production server, then compress and ship the files across to the DR application server nightly. (We don't require high availability).
    In the event of a disaster we then extract the files and copy to the OC4J instance (pre-created and configured) on the DR server. Unfortunately to date we haven't been able to reliably setup a DR application (seem to mostly get 404 errors etc), even though the OC4J application has its connection pool resolved to the DR database and is showing as "up" in the ASConsole.
    My question is, is there a more "native" way to do what we are trying to do. We do not have Enterprise version of SOA Suite or 11g database so any advanced recovery features are not an option. The setup is also stand alone, i.e. we are not using clustering or RAC etc.
    Any ideas would be really helpful.
    Thanks,
    Leigh.
    PS we are also running the production apps server with Oracle Application server 10g 10.1.2.3.0 as the HTTP apache server (with Forms, Reports and Discoverer deployed) and the SOA Suite 10.1.3 applications use the 10.1.2 HTTP server via the HTTP to AJP bridge. So the 10.1.3 OC4J instance is configured to use AJP on port range 12501 - 12600.

    For enterprise solutions, AS Guard would work.
    http://download.oracle.com/docs/cd/B25221_04/core.1013/b15977/disasrecov.htm#sthref303
    However, since advanced recovery options are not available (as you said), then what you are doing should not be too bad.
    AMN

  • Unable to Harvest a SOA composite from SOA suite server to OER11g

    Hi All,
    I wanted to harvest a SOA composite from SOA suite server to OER11g.For that i had followed this portion *5.2.6.1 Harvesting from Oracle SOA Suite Server* from Oracle® Fusion Middleware Configuration Guide for Oracle Enterprise Repository11g Release 1 (11.1.1) E16580-01 document.
    The Version of OER is : OER 11.1.1.2.0 , the version of SOA suite is : 11.1.1.3.0 and the version of SOA weblogic server is :10.3.3
    OER and SOA domain are different but under the same Middleware home.
    Database is also located at same machine.
    The steps i had followed:
    1.The User of the weblogic server has these three roles i.e 1. Admin 2. Operator 3. Monitor
    2.Unzip the Harvester.zip into the repository location.
    3.Modified the <RemoteQuery> section and OER section of HarvesterSettings.xml file
    4.using encrypt.bat file encrypted the password.
    5.executed the harvester.bat file
    The HarvesterSetting.xml file :
    <?xml version="1.0" encoding="UTF-8"?>
    <tns:harvesterSettings xmlns:tns="http://www.oracle.com/oer/integration/harvester" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.oracle.com/oer/integration/harvester Harvester_Settings.xsd ">
    <!--Description to set on created Assets in OER.-->
    <harvesterDescription/>
    <!--Registration status to set on created Assets in OER.
    The Valid Registration states are 1) Unsubmitted 2)Submitted - Pending Review 3)Submitted - Under Review 4)Registered -->
    <registrationStatus>Unsubmitted</registrationStatus>
    <!--Namespace to set on created Assets in OER. If left empty, this is set based on information from SOA Suite and OSB projects
    when available. That's generally the best practice, so override this with caution.-->
    <namespace/>
    <!--If true, trigger OER events for use by Workflow. Warning: this can decrease performance.-->
    <triggerEvent>false</triggerEvent>
    <!--Connection info to OER-->
    <repository>
    <uri>http://localhost:7101/oer</uri>
    <credentials>
    <user>admin</user>
    <password>v2_1.PHQe8yYXiqU=</password><!--run encrypt.bat to encrypt this-->
    </credentials>
    <timeout>30000</timeout>
    </repository>
    <!--Query: the files to harvest-->
    <query>
    <!--To specify design-time files to harvest: Uncomment the section below and specify the file(s) you want to harvest.
    Or specify on the command-line via the -file parameter.-->
    <!--
    <fileQuery>
    <rootDir>C:\wsdls\adapter\file\DynamicSynchronousReadTutorial\DynamicSyncRead</rootDir>
    <files>bpel</files>
    </fileQuery>
    -->
    <!--To specify run-time files to harvest: Uncomment this and specify the file(s) you want to harvest.
    Or specify on the command-line via the -file parameter.
    The serverType must be one of: SOASuite, OSB, or WLS.
    Run encrypt.bat to encrypt the password.-->
    <remoteQuery>
    <serverType>SOASuite</serverType>
    <projectName>TestOER_rev1.0</projectName>
    <uri>http://localhost:7403/</uri>
    <credentials>
    <user>weblogic</user>
    <password>v2_1.G+NTr3az8thaGGJBn0vwPg==</password>
    </credentials>
    </remoteQuery>
    </query>
    <introspection>
    <reader>com.oracle.oer.sync.plugin.reader.file.FileReader</reader>
    <writer>com.oracle.oer.sync.plugin.writer.oer.OERWriter</writer>
    </introspection>
    </tns:harvesterSettings>
    Error Message ::
    C:\Oracle\Middleware\repository111\11.1.1.2.0-OER-Harvester>harvest.bat
    Connecting to: service:jmx:t3://localhost:7403/jndi/weblogic.management.mbeanservers.runtime
    0 [main] WARN com.oracle.oer.sync.framework.impl.DefaultPluginManager - Unable to initialize harvester plugin: C:\Oracle\Middleware\repository111\11.1.1.2.0-OER-
    9624 [main] INFO com.oracle.oer.sync.framework.MetadataManager - Oracle Enterprise_Repository_Harvester version: v11.1.1.2.0-100119_0001-1293556
    Connecting to: service:jmx:t3://localhost:7403/jndi/weblogic.management.mbeanservers.runtime
    18669 [main] WARN com.oracle.oer.sync.framework.impl.DefaultPluginManager - Unable to initialize harvester plugin: C:\Oracle\Middleware\repository111\11.1.1.2.0-OER
    Connecting to: service:jmx:t3://localhost:7403/jndi/weblogic.management.mbeanservers.runtime
    45196 [main] ERROR com.oracle.oer.sync.framework.MetadataManager - Artifact harvest failed due to:
    org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 203 completed: No
    at com.sun.corba.se.impl.logging.ORBUtilSystemException.writeErrorSend(ORBUtilSystemException.java:2259)
    at com.sun.corba.se.impl.logging.ORBUtilSystemException.writeErrorSend(ORBUtilSystemException.java:2281)
    at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.writeLock(SocketOrChannelConnectionImpl.java:957)
    at com.sun.corba.se.impl.encoding.BufferManagerWriteStream.sendFragment(BufferManagerWriteStream.java:86)
    at com.sun.corba.se.impl.encoding.BufferManagerWriteStream.sendMessage(BufferManagerWriteStream.java:104)
    at com.sun.corba.se.impl.encoding.CDROutputObject.finishSendingMessage(CDROutputObject.java:144)
    at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.finishSendingRequest(CorbaMessageMediatorImpl.java:247)
    at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.marshalingComplete1(CorbaClientRequestDispatcherImpl.java:355)
    at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.marshalingComplete(CorbaClientRequestDispatcherImpl.java:336)
    at com.sun.corba.se.impl.protocol.CorbaClientDelegateImpl.invoke(CorbaClientDelegateImpl.java:129)
    at com.sun.corba.se.impl.protocol.CorbaClientDelegateImpl.is_a(CorbaClientDelegateImpl.java:213)
    at org.omg.CORBA.portable.ObjectImpl._is_a(ObjectImpl.java:112)
    at weblogic.corba.j2ee.naming.Utils.narrowContext(Utils.java:126)
    at weblogic.corba.j2ee.naming.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:94)
    at weblogic.corba.j2ee.naming.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:31)
    at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:41)
    at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
    at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
    at javax.naming.InitialContext.init(InitialContext.java:223)
    at javax.naming.InitialContext.<init>(InitialContext.java:197)
    at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:143)
    at weblogic.management.remote.common.ClientProviderBase.newJMXConnector(ClientProviderBase.java:79)
    at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnectorFactory.java:338)
    at com.oracle.oer.sync.plugin.reader.soasuite11g.SOASuite11gRemoteReader.initConnection(SOASuite11gRemoteReader.java:286)
    at com.oracle.oer.sync.plugin.reader.soasuite11g.SOASuite11gRemoteReader.read(SOASuite11gRemoteReader.java:84)
    at com.oracle.oer.sync.plugin.reader.soasuite11g.SOASuite11gRemoteReader.getFilesToRead(SOASuite11gRemoteReader.java:62)
    at com.oracle.oer.sync.plugin.reader.file.FileReader.getFilesToRead(FileReader.java:198)
    at com.oracle.oer.sync.plugin.reader.file.FileReader.read(FileReader.java:79)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.flashline.util.classloader.ContextClassLoaderHandler.invoke(ContextClassLoaderHandler.java:39)
    at $Proxy14.read(Unknown Source)
    at com.oracle.oer.sync.framework.MetadataManager.start(MetadataManager.java:598)
    at com.oracle.oer.sync.framework.Introspector.<init>(Introspector.java:191)
    at com.oracle.oer.sync.framework.Introspector.main(Introspector.java:395)
    com.oracle.oer.sync.framework.MetadataIntrospectionException: Artifact harvest failed due to:
    at com.oracle.oer.sync.framework.MetadataManager.start(MetadataManager.java:603)
    at com.oracle.oer.sync.framework.Introspector.<init>(Introspector.java:191)
    at com.oracle.oer.sync.framework.Introspector.main(Introspector.java:395)
    Caused by: org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 203 completed: No
    at com.sun.corba.se.impl.logging.ORBUtilSystemException.writeErrorSend(ORBUtilSystemException.java:2259)
    at com.sun.corba.se.impl.logging.ORBUtilSystemException.writeErrorSend(ORBUtilSystemException.java:2281)
    at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.writeLock(SocketOrChannelConnectionImpl.java:957)
    at com.sun.corba.se.impl.encoding.BufferManagerWriteStream.sendFragment(BufferManagerWriteStream.java:86)
    at com.sun.corba.se.impl.encoding.BufferManagerWriteStream.sendMessage(BufferManagerWriteStream.java:104)
    at com.sun.corba.se.impl.encoding.CDROutputObject.finishSendingMessage(CDROutputObject.java:144)
    at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.finishSendingRequest(CorbaMessageMediatorImpl.java:247)
    at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.marshalingComplete1(CorbaClientRequestDispatcherImpl.java:355)
    at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.marshalingComplete(CorbaClientRequestDispatcherImpl.java:336)
    at com.sun.corba.se.impl.protocol.CorbaClientDelegateImpl.invoke(CorbaClientDelegateImpl.java:129)
    at com.sun.corba.se.impl.protocol.CorbaClientDelegateImpl.is_a(CorbaClientDelegateImpl.java:213)
    at org.omg.CORBA.portable.ObjectImpl._is_a(ObjectImpl.java:112)
    at weblogic.corba.j2ee.naming.Utils.narrowContext(Utils.java:126)
    at weblogic.corba.j2ee.naming.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:94)
    at weblogic.corba.j2ee.naming.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:31)
    at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:41)
    at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
    at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
    at javax.naming.InitialContext.init(InitialContext.java:223)
    at javax.naming.InitialContext.<init>(InitialContext.java:197)
    at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:143)
    at weblogic.management.remote.common.ClientProviderBase.newJMXConnector(ClientProviderBase.java:79)
    at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnectorFactory.java:338)
    at com.oracle.oer.sync.plugin.reader.soasuite11g.SOASuite11gRemoteReader.initConnection(SOASuite11gRemoteReader.java:286)
    at com.oracle.oer.sync.plugin.reader.soasuite11g.SOASuite11gRemoteReader.read(SOASuite11gRemoteReader.java:84)
    at com.oracle.oer.sync.plugin.reader.soasuite11g.SOASuite11gRemoteReader.getFilesToRead(SOASuite11gRemoteReader.java:62)
    at com.oracle.oer.sync.plugin.reader.file.FileReader.getFilesToRead(FileReader.java:198)
    at com.oracle.oer.sync.plugin.reader.file.FileReader.read(FileReader.java:79)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.flashline.util.classloader.ContextClassLoaderHandler.invoke(ContextClassLoaderHandler.java:39)
    at $Proxy14.read(Unknown Source)
    at com.oracle.oer.sync.framework.MetadataManager.start(MetadataManager.java:598)
    ... 2 more
    Please provide some solution.Any help would be useful to me.
    Thanks in advance.
    Sharmistha.

    You have to import the OER-Harvester-Solution-Pack located at C:\Oracle\Middleware\repository111\core\tools\solutions\11.1.1.4.0-OER-Harvester-Solution-Pack.zip
    (path may change under your custom installation) to the OER using the admin option import/export -> import

  • SOA Suite 11.1.1.3 with WLS_1033 - Problem starting - vanishes away-no log

    I just installed the latest version of SOA Suite 11.1.1.3 with WLS 1033 incl. RCU etc. on Windows XP SP2
    when I do start the server (from the Windows Program shortcut or from the prompt) the admin server starts and the cmd window closes after about 30 lines of commands (which I cannot exactly see, as passing by too quick) and without giving more information...(;-(
    When I try to stop the admin server, it is stating, that there is a lack of memory heap for the VM (I use SUN JDK 1.60_18)
    Whereas I adjusted the memory in "setSOADomainEnv.cmd" like "set DEFAULT_MEM_ARGS=-Xms512m -Xmx512m" as in SOA Suite 11.1.1.2 and also 1024m will not help....
    Any assistance to get my server running wud be appreciated !
    TIA
    Bernhard
    From the command line window when tryiing to stop (whereas the server has not yet started) I only got:
    USER_MEM_ARGS=-Xms512m -Xmx1024m -XX:PermSize=512m -XX:MaxPermSize=512m
    JAVA_OPTIONS= -Xverify:none
    ** End SOA Specific environment setup for win.
    ** SOA specific environment is already set. Skipping ...
    Stopping Weblogic Server...
    Error occurred during initialization of VM
    Could not reserve enough space for object heap
    Could not create the Java virtual machine.
    Done
    Stopping Derby Server...
    Edited by: BernhardFW on Jul 21, 2010 3:20 PM
    after a fourth install I got it running now with JRockit (!!!) - which leads me to believe, there is a JDK Problem.....
    Edited by: BernhardFW on Jul 22, 2010 10:04 AM

    Bernard,
    I had the same problem, I fixed it by cleaning up all my JDK's on my machine. I had some incomplete uninstalled older JDK's on my machine, which left some entries in the Windows Registry. I could see them in the 'Add or remove Programs' control panel, but could not uninstall them and got a Windows error message instead.
    The exact steps to fix this are:
    - uninstall all JDK's from the 'Add or remove Programs' control panel
    - remove all remaining JDK files from the file system
    - remove all JDK entries from the Windows Registry
    - do a fresh JDK installation
    For me, this fixed the problem

  • Upgrade Weblogic10.3.3 and SOA Suite  11.1.1.3.0

    Upgrade Weblogic10.3.3 and SOA Suite  11.1.1.3.0
    We would like to upgrade Weblogic10.3.3 and SOA Suite  11.1.1.3.0 and have few questions related with upgrade.
    Q-1 Should we upgrade to latest weblogic version WebLogic Server 10.3.6 ?
    Q-2 Do we need to upgrade SOA Suite 11.1.1.6.0 compatible with WebLogic Server 10.3.6 ?
    Q-3 Do we have step by step process for migration ?
    Q-4 Do we need to create new schema for latest version of SOA Suite 11.1.1.6.0 ?
    Q-5 What is the process to copy the existing data from database schema from SOA Suite  11.1.1.3.0 version to new SOA Suite 11.1.1.6.0

    Hi,
    i upgraded the SOA Suite from 11.1.1.4.to 11.1.1.7.
    Q-1 Should we upgrade to latest weblogic version WebLogic Server 10.3.6 ?
    Yes : aktually 10.3.6.0.9
    Q-2 Do we need to upgrade SOA Suite 11.1.1.6.0 compatible with WebLogic Server 10.3.6 ?
    Yes. Why 11.1.1.6, i would upgrade to the latest version 11.1.1.7
    Q-3 Do we have step by step process for migration ?
    Yes. You can check the MOS Note: https://support.oracle.com/epmos/faces/DocContentDisplay?id=1349156.1
    Q-4 Do we need to create new schema for latest version of SOA Suite 11.1.1.6.0 ?
    Not necessary. But you may test your upgrade. We upgraded out of the place. By Inplace Upgradeyou may have backup for the fallback.
    Q-5 What is the process to copy the existing data from database schema from SOA Suite  11.1.1.3.0 version to new SOA Suite 11.1.1.6.0
    Check the MOS Note above and Oracle Dokument Oracle Fusion Middleware Online Documentation Library

  • Oracle SOA Suite 11g vs jdevstudio11.11

    In reviewing the SOA Order Booking Quikstart Guide it requires that you download and configure Oracle SOA Suite. Prior to starting this Guide, I had already downloaded the Oracle SOA Suite 11g Technology Preview which included two downloads (JDeveloper and the update to the design and runtime). I followed the install instructions from the same site.
    1) Having completed these two downloads and installs do I still need to install and configure the Oracle SOA Suite to run the SOA Order Quickstart Guide?
    2) My understanding was that the Oracle SOA Suite 11g Technology Preview included the Oracle SOA Suite, is this correct? If not correct, do I need to also install the Oracle SOA Suite (my downloaded version is soa_windows_x86_101310_disk1.zip)?
    3) When configuring the SOA Suite, per the guide, it states that I should go to http://loalhost:8888 but I do not get a connection. If I still need to install the Oracle Suite then I expect that this will solve this issue (per questions above) but if it already is isntalled with the SOA Suite 11g Technology Preview then I confused as to how to get this location to show up? I can get the SOA Console to show up but I don't know if this is the same?

    The SOA Orderbooking Quickstart is for SOA Suite 10.1.3.x. If you want to run this sample, you do have to install SOA Suite 10.1.3.x. This is the current released version of SOA Suite.
    The Technology Preview 3 is SOA Suite 11g. This version is in a pre-beta/preview status right now. It has the SOA Suite with the JDeveloper. This version has its own tutorials/samples.
    In reply to your specific questions:
    1) the two downloads for the TP3 do not apply to the 10.1.3.1 SOA Orderbooking Quickstart.
    2) The 11g TP3 does include the 11g SOA Suite and you do not need to install the 10.1.3.1 zip to run the preview.
    3) When you run the SOA Suite 10.1.3.1, the default port is 8888. When you run the 11g SOA Suite inside JDev, the default port is 8988.
    Heidi.

  • Upgrade of SOA Suite 10.1.3.4 weblogic server

    We have Oracle SOA Suite 10.1.3.4 with weblogic 9.2 as application server. Can we safely upgrade weblogic server to 10.3.2 without disturbing SOA Suite deployments. e.g. BPEL processes.
    thanks

    Hello Derek !
    Let me clarify:
    1. FP for SOA Suite on OC4J requires advance install of SOA Suite.
    2. FP for SOA suite on WLS requires basic version of SOA Suite.
    Though the SOA Install guide for WLS talks about explicitly http://download.oracle.com/docs/cd/E10291_01/doc.1013/e11848/weblogic.htm#BHCBEIBE
    I agree that this information is not explicit enough in AIA Install guide, I will see if this can be included in existing 2.4 guide and a new version be uploaded to metalink. if not I will have this corrected for 2.5 guide.
    and you are correct , MLR 7 is not certified on WLS, after MLR3, only MLR 8 is certified on WLS.
    Thanks
    -Teja

  • The ORACLE_HOME doesnt have the right version of SOA or OSB ?

    Hi,
    When I install Application Adapters for WeblogicServer. After enter ORACLE_HOME, the window apear said: The ORACLE_HOME doesnt have the right version of SOA or OSB, The adapters can not be installed.
    I tried another SOA version (Oracle SOA Suite 11.1.1.5.0, 11.1.1.3.0 and 11.1.1.2.0). I checked the JavaHome and Runtime variable. But can't pass that install step.
    Anyone meet this ? And how to solve ? Help me.
    Thanks

    Hi,
    Make sure that the linux installation user can create file in the directory that contains the installation binary.
    Indeed, the wizard create a log file in this directory.
    Arnaud CHOTARD.

  • Is Oracle JDeveloper 12c Studio is an all-encompassing SOA suite?

    Hello,
    Need some clarification on this whole SOA puzzle.   Turns out there are more than one "current" version of Jdevelopers.
    Oracle SOA's latest release is 11g.   Jdeveloper Suite latest release is 12c.    When you download SOA Suite from OTN, you get 11g not 12c.
    So the question is, in order to learn latest of SOA suite and FMW,  which one should be downloaded?
    If 12c is not SOA suite than, is it supported when used with SOA suite 11g.
    Please advise.
    Darsh

    Hi Darsh,
    Oracle recommends you use the version of JDeveloper which correlates with the version of SOA Suite you are using. So if you just want to "learn the latest of SOA suite and FMW" I suggest downloading the 11.1.1.7 version of JDeveloper and SOA Suite.
    Event though there are later versions of JDeveloper they don't have the necessary SOA add ons required.
    Regards
    Riaan

  • SOA Suite 11g - Email with attachments (Attachment from SOAP attachment)

    Hello,
    Can any one please help as to how I can do the following in Oracle SOA 11g:
    Using a BPEL process how can I send an Email with attachments where the attachment itself is coming from a SOAP attachment.
    The back ground is that we have portal sites from where the users can upload a document and then from their a SOA service is invoked and the attachment would be passed as (SOAP attachments) and then emails have to be send to users containing this uploaded document as the attachment.
    Thanks.
    feel free to email me [email protected]

    Yes, I need all supported standards and their version of SOA Suite 11g because my customer wants to upgrade from 10g to 11g, especially all supported standards and version number of OBPM 11g and OBPM 10g.
    A people has pasted all support standards and version number of OBPM 10g. I get a standard list of OSB.
    OBPM 11g supports:
    BPEL
    xml 1.0
    Servlet 2.3\JSP1.2 （J2EE 1.2）,
    Servlet 2.4\JSP2.0（J2EE 1.4）,
    Servlet 2.5\JSP2.1（Java EE 1.5）
    UDDI
    SOAP
    WSDL
    WS-BPEL for People
    XML Schema
    XPDL
    SOAP
    XQuery
    XLIFF
    XSL map
    XSLT
    UML
    Ant
    EJB 2.1, JPA/EJB 3.0
    JAAS
    Spring
    JAXB 1.0, JAXB 2.0
    XHTML
    HTML
    JSP
    JSF
    JSR-168
    XSQL
    WS-Policy
    But I cannot find the document about version number of the above standards

Maybe you are looking for

  • Unable to expand Tree in EP   (e.g. Portal Content)

    Dear Portal Gurus, We are on EP 6.0,SP12. We are unable to expand any tree structure (including stanadard Tree Structure) inside EP. I get the following message : Could not load or refresh node Tree creation failed on node: pcd:portal_content . Pls l

  • Filtering e-mail on iPhone

    Is the a way, when iPhone downloads my e-mail from my office via POP, to filter out unwanted messages or not download certain messages? I'd rather not download e-mail from a tech listserv I'm on, which can mount up and I'd rather check when I get bac

  • How to get podcast arrow to go to iTunes store page

    Right now, when I click on the arrow next to the name of my podcast, it goes to the website affiliated with the podcast instead of the podcast page on the iTunes store like most podcasts do. How can I fix this? The feed is located at http://www.uscaa

  • How to change Global variable in the query

    Hi, I have 6 reports which is using 0PDT as a global variable and has single option as a property. Now I want to change this property and have multiple selection but I am not able to change its property. I am able to see all the filter variables from

  • Coder needed to wrap my .jar using the JavaFX Packager Utility

    Hello-I am not a coder. I am looking for a programmer who is able to wrap my .jar using the JavaFX Packager Utility. I would like to upload my app to the Mac App Store also and need assistance doing that. Please contact me for more details if you are