Nexus 2232 TM uplink ports are they only for uplink use?
We have upgraded our N5K to support the new 2232TM, but now we face the issue that the 8 SFP+ ports are not visible in our config:
Nexus5010_1# sh fex 103 det
FEX: 103 Description: 2KSRV02 state: Online
FEX version: 5.0(3)N2(2a) [Switch version: 5.0(3)N2(2a)]
FEX Interim version: 5.0(3)N2(2a)
Switch Interim version: 5.0(3)N2(2a)
Extender Model: N2K-C2232TM-10GE, Extender Serial: FOC15262P7Q
Part No: 73-13626-03
Card Id: 164, Mac Addr: 30:e4:db:66:12:02, Num Macs: 64
Module Sw Gen: 21 [Switch Sw Gen: 21]
post level: complete
pinning-mode: static Max-links: 1
Fabric port for control traffic: Eth1/9
Fabric interface state:
Po103 - Interface Up. State: Active
Eth1/9 - Interface Up. State: Active
Eth1/10 - Interface Up. State: Active
Fex Port State Fabric Port
Eth103/1/1 Down Po103
Eth103/1/2 Down Po103
Eth103/1/3 Down Po103
Eth103/1/4 Down Po103
Eth103/1/5 Down Po103
Eth103/1/6 Down Po103
Eth103/1/7 Down Po103
Eth103/1/8 Down Po103
Eth103/1/9 Down Po103
Eth103/1/10 Down Po103
Eth103/1/11 Down Po103
Eth103/1/12 Down Po103
Eth103/1/13 Down Po103
Eth103/1/14 Down Po103
Eth103/1/15 Down Po103
Eth103/1/16 Down Po103
Eth103/1/17 Down Po103
Eth103/1/18 Down Po103
Eth103/1/19 Down Po103
Eth103/1/20 Down Po103
Eth103/1/21 Down Po103
Eth103/1/22 Down Po103
Eth103/1/23 Down Po103
Eth103/1/24 Down Po103
Eth103/1/25 Down Po103
Eth103/1/26 Down Po103
Eth103/1/27 Down Po103
Eth103/1/28 Down Po103
Eth103/1/29 Down Po103
Eth103/1/30 Down Po103
Eth103/1/31 Down Po103
Eth103/1/32 Down Po103
They are not visible: neither with the "show fex" neither with the "show int status", we cannot configure them....?
Do you think it's possible to access these ports by another way and configure them to allow some hosts to connect on it or is their purpose exclusively UPLINK?
best regards,
Eric Gillis
Do you mean the Fabric interfaces? If yes, you cannot use those for any host connectivities.
HTH,
jerry
Similar Messages
-
Applications - are they only for touch and phone?
Are there any applications for the 30g ipod 5th generation?
Applications - are they only for touch and phone?
Yes.
Are there any applications for the 30g ipod 5th generation?
No.
(36283) -
Why the Fibre uplink ports are down state even after giving no shutdown command at the interface
Hi
My Predecessors brought 2 CISCO 3750 switches and implemented LACP on these core switches. Due to looping in the network the Fibre uplink ports GigabitEthernet1/1/3 and GigabitEthernet2/1/3 are down (I think these uplink ports are mirrored in the LACP concept)
Please see below from the configuration.
I logged into the core switch and went to this particular interface GigabitEthernet1/1/3 and I gave the following command and still the port is in the down state after I gave no shutdown command. Do I need to give the same no shutdown command at interface GigabitEthernet2/1/3 as well ?
Switch-Core1(config) interface GigabitEthernet1/1/3
Switch-Core1(config-if)#no shutdown
Switch-Core1(config-if)#
Please see below After no shutdown command given still these 2 Gigabit fibre uplink ports are down.
GigabitEthernet1/0/20 unassigned YES unset up up
GigabitEthernet1/0/21 unassigned YES unset down down
GigabitEthernet1/0/22 unassigned YES unset down down
GigabitEthernet1/0/23 unassigned YES unset down down
GigabitEthernet1/0/24 unassigned YES unset up up
GigabitEthernet1/1/1 unassigned YES unset up up
GigabitEthernet1/1/2 unassigned YES unset up up
GigabitEthernet1/1/3 unassigned YES unset down down
GigabitEthernet1/1/4 unassigned YES unset up up
Te1/1/1 unassigned YES unset down down
Te1/1/2 unassigned YES unset down down
GigabitEthernet2/0/1 unassigned YES unset up up
GigabitEthernet2/0/2 unassigned YES unset up up
GigabitEthernet2/0/3 unassigned YES unset up up
GigabitEthernet2/0/4 unassigned YES unset down down
GigabitEthernet2/0/5 unassigned YES unset up up
GigabitEthernet2/0/6 unassigned YES unset down down
GigabitEthernet2/0/7 unassigned YES unset down down
GigabitEthernet2/0/8 unassigned YES unset up up
GigabitEthernet2/0/9 unassigned YES unset up up
GigabitEthernet2/0/10 unassigned YES unset down down
GigabitEthernet2/0/11 unassigned YES unset down down
GigabitEthernet2/0/12 unassigned YES unset down down
GigabitEthernet2/0/13 unassigned YES unset down down
GigabitEthernet2/0/14 unassigned YES unset up up
GigabitEthernet2/0/15 unassigned YES unset up up
GigabitEthernet2/0/16 unassigned YES unset up up
GigabitEthernet2/0/17 unassigned YES unset up up
GigabitEthernet2/0/18 unassigned YES unset up up
GigabitEthernet2/0/19 unassigned YES unset down down
GigabitEthernet2/0/20 unassigned YES unset up up
GigabitEthernet2/0/21 unassigned YES unset down down
GigabitEthernet2/0/22 unassigned YES unset up up
GigabitEthernet2/0/23 unassigned YES unset down down
GigabitEthernet2/0/24 unassigned YES unset up up
GigabitEthernet2/1/1 unassigned YES unset up up
GigabitEthernet2/1/2 unassigned YES unset up up
GigabitEthernet2/1/3 unassigned YES unset down down
GigabitEthernet2/1/4 unassigned YES unset up up
Te2/1/1 unassigned YES unset down down
Te2/1/2 unassigned YES unset down down
Port-channel1 unassigned YES unset down down
Port-channel2 unassigned YES unset down down
Please let me know if I am doing something wrong .Please post me some tutorial to sort this.It is possible you are overloading that little 4215. If that is the case you should also be seeing "missed packet percentage" messages in your events.
How much traffic is your 4215 getting? Those sensors will start to drop packets for inspection at about 30 Mb/s.
- Bob -
ITunes card are They Good for music only
Itunes card are They good for music only or both
They work for whatever content is available in the iTunes Store: Music, Apps, Movies, TV Shows, etc.
-
When I import video clips, why are they only recognized as audio clip?
Please do not post the same question twice http://forums.adobe.com/thread/1450571?tstart=0
If you are using Premiere Pro, you need http://forums.adobe.com/community/premiere?view=discussions
If Premiere Elements, you need http://forums.adobe.com/community/premiere_elements?view=discussions
If some other program, post the name of the program -
I have numbers and pages on my iPhone but cannot seem to transfer them to the mac I purchased today ? Are they formatted for the iPhone only ? They appear to be downloaded but I cannot find them on the MAC - where should I look ?
Welcome to the Apple community.
The apps you have purchased for your mobile device will not work on a computer. You will need to download the appropriate versions on your Mac from the Mac apps store. -
Macmini among the latest i5 or i7 are they appropriate for web/graphics/software development
Macmini among the latest i5 or i7 are they appropriate for web/graphics/software development?
Can operate with ease with Adobe Creative Cloud cs6 Apps? Also with xcode or Eclipse etc IDEs?
Also can get carried easily, and is 240/110V voltage Europe/USA?
MACmini server have all abilities of macmini client plus more, hence, can run Adobe Creative Cloud cs6 Apps, xcode & Eclipse?Electrical and Operating Requirements
Line voltage: 100-240V AC
Frequency: 50Hz to 60Hz, single phase
http://store.apple.com/us/browse/home/shop_mac/family/mac_mini/select
Realize that only the Middle Mini has a real Graphic card.
http://news.softpedia.com/news/What-You-ll-Need-to-Run-Adobe-CS6-Mac-System-Requ irements-267982.shtml
http://prodesigntools.com/products/adobe-cs6-system-requirements.html -
Somebody please help:
I've taught myself enough with Flash to customize a
fully-Flash template for my wife's website, and two of the buttons
didn't do what I wanted them to in Actionscript. They then began
giving me the message:
**Error** Symbol=sub_butt1, layer=Layer 4, frame=1:Line 1:
Mouse events are permitted only for button instances
on (rollOver) {
**Error** Symbol=sub_butt1, layer=Layer 4, frame=1:Line 4:
Mouse events are permitted only for button instances
on (releaseOutside, rollOut) {
Total ActionScript Errors: 2 Reported Errors: 2
Not only do I not know how to fix this, the same message
comes up for every single button in the entire fla I had saved,
plus earlier versions where I hadn't even messed with the buttons
yet.
Any suggestions?Hello Corbett,
The error is saying that you are trying to apply a button
action to something
other than a button. Often this happens when you select the
frame that the
button is on instead of the actual button, thus applying the
action to the
frame instead of the button.
Make sure you select the button on the stage and then apply
the actions there.
You'll probably have to remove the action from the frame
before it will work
(looks like it's on Layer 4 frame 1).
Good luck!
Jesse H.
Adobe Community Expert
My site:
http://www.jharding.com
Free Blog Radio:
http://www.tornadostream.com
> Somebody please help:
> I've taught myself enough with Flash to customize a
fully-Flash
> template for
> my wife's website, and two of the buttons didn't do what
I wanted them
> to in
> Actionscript. They then began giving me the message:
>
> **Error** Symbol=sub_butt1, layer=Layer 4, frame=1:Line
1: Mouse
> events are
> permitted only for button instances
> on (rollOver) {
> **Error** Symbol=sub_butt1, layer=Layer 4, frame=1:Line
4: Mouse
> events are
> permitted only for button instances
> on (releaseOutside, rollOut) {
> Total ActionScript Errors: 2 Reported Errors: 2
>
> Not only do I not know how to fix this, the same message
comes up for
> every
> single button in the entire fla I had saved, plus
earlier versions
> where I
> hadn't even messed with the buttons yet.
> Any suggestions? -
I was not warned that audiobooks are a one time download only for those using iCloud to backup. As a result I've lost my audiobook when switching to a new iPhone after the previous phone was damaged.
Will Apple refund me for the audio book?
the irony of this is that the lost audio books is Steve Jobs biography!
Starting to wonder about the benefits of Android :-/If you haven't been keeping a backup of your downloads (none of your iTunes downloads are included in an iCloud backup, apps, music etc are only redownloadable whilst they remain in your country's store) then you can try contacting iTunes support and see if they will grant you a redownload : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
-
Dear Sir/Madam
I want to tell you that I am very disappointed because I just read that in photo stream my photos are stored only for (30) thirty days.I didn't know that and I didn't have the time to save them on a device.
I was robbed of mobile before (3) three days and I lost 2.000 photos!
Is there any possibility to retrieve them?
If it was possible that would be great as I would save them immediately to my computer instead of losing them again.
Thank you for understanding
Kind Regards
Giaourtsakis KleanthisIf you were trying to get this apple, you would do it here: https://getsupport.apple.com/
-
Leopard and CS3 - Are they ready for prime time?
Trying to revive this thread, I manage 130 Macs at an art school and I am starting to research what I am going to do this summer as far as OS and CS versions. Currently we are on 10.4.9 and CS2 and about 15% of our Macs are Intels. I am concerned as I am not hearing good things about Leopard and I am wondering if CS3 is ready for prime time. I should note that stability is my first priority NOT the latest OS and App versions. So the question is are they ready for prime time or should I stay with CS2 and Tiger or should I go CS3 and Tiger.
Summer is a long way off, so hard to guess. I would say that if they don't have the kinks out by then, they probably never will, but still a gamble at this point IMO. I have one of the new Mac Pros (early 2008) w/CS3 Apps installed. I have been using all the below listed apps for the past two weeks without any major problems so far, but I also know that I may be living on the edge right now. I don't feel confident enough to switch to Leopard on my other two computers yet. My restarts on the new machine take about 30-seconds between selecting Restart and ready to start work again (vs about 1.5-2 minutes on my Dual G5). Apps like Photoshop CS3 launch in about 1/3 the time. But all of this speed means absolutely nothing when you slam into an incompatibility - that is the real time trap - I spent the last 8 hours doing nothing but tracking down a Permissions problem in Leopard that none of the utilities will currently fix.
These appear to be working for me so far...
Photoshop CS3
Illustrator CS3
InDesign CS3
Flash CS3
Dreamweaver CS3
Bridge CS3
Lightroom
After Effects CS3
Contribute CS3
What doesn't work yet...
Acrobat Pro & Acrobat Reader (fix was expected from Adobe last month)
Other issues encountered so far...
Most Photoshop and After Effects Plugins required paid upgrades to function in Leopard/CS3 (over $1500 for me the past week)
Monitor calibrator software (such as Artisan) dead with no fixes, but to buy all new hardware calibrators/software - again! - another $1000 bucks
I purchased the Silverfast Leopard upgrade ($105) to get the Epson 4870 scanner plugin to work with Photoshop CS3, but having problems - I think it is a Leopard problem
Adobe UPDATES menu item is dimmed out in all CS3 apps.
Having lots of Leopard User Permissions problems - hopefully 10.5.2 will help? -
When setting up yahoo e mail what info are they asking for in the description block
When setting up Yahoo e mail on i pad2 what information are they asking for in the description block
It's just a name/description so that you can identify the account in the Mail app. If you have more than one email account set up on the iPad, then that is the name that appears and which you select when switching between them - so it just needs to be something so that you can identify which email account it is so that you know which one it is that you are selecting/viewing
-
I phone apps, are they just for the iphone?
i phone apps, are they just for the iphone?
Can I use iphone apps on my imac?No, they won't work.
-
hey my little sister pressed something on my ipod and ever since some o f my songs are playing only for the first few seconds how do i solve this problem
BaconBits is right to ask if the files are protected or not.
DRM files can only be transferred using Windows Media Player, Creative MediaSource or Nano Media Explorer so that the licenses are transferred. Do not try drag'n'drop with Windows Explorer on porotected files. This is explained in the Help file manual on your CD.
Also do not use Audible Manager to transfer music files.
PB -
WHY FREE ITUNES PRODUCTS ARE AVAILABLE ONLY FOR USA AND NOT FOR OTHER USERS OUTSIDE USA
I am so impressed wit the welcome page saying "Join the conversation. Share tips and solutions with fellow Apple product users from all around the world."
Apple mentioned for their products users around the world but many of their free itunes products are available only for USA and not for the users from the other side of the globe?
Is this Apple a fair and customer oriented company or full of bias and Only money oriented company.
If apple could not make thier other FREE stuffs available outside US territory then better for thsi company to just sell their products in USA. its just so disgusting... If we need a certain apps (FREE APPS) available only for US based users.
If you think US users and other country users are paying the same prices for their iPad 3G/4G WIFI 64GB and iPhone 3G/4G 64 GB like hat I did having the 2 gadgets altogether but my investment ends to disgusting as the apple company cound not treat people equal then..... I want to return all this **** stuffsiTunes for Different Countries
iTunes Store: Which types of items can I buy in my country?
Maybe you are looking for
-
GRN creation using BAPI_GOODSMVT_CREATE
Hi I have created a program for creation of GRN using the Bapi BAPI_GOODSMVT_CREATE.I am able to create GRN successfully but one field STOCK TYPE (STCK_TYPE IN BAPI) does not fill with correct value.I am supposed to put the value for that as '2' '3
-
Why is my iPhoto 9.5.1 blocked? Message on pop up screen says I need the Library Upgrader tool, when in the very discription of it: "If your library is from iPhoto (v8.x) or later, you don't need to use this tool."
-
Director 11 line.count problem?
Hi all. My name is Natassa and this is my first time here! I am not new with Director, but can't figure out the following! There seems to be something wrong when working with text members regarding the line.count property. In our project, i parse thr
-
Hi, We have only one small adf application in weblogic 10.3.5. After 3 or 4 days, wls goes into GC overlimit error msg. We putted batch file in task scheduler for garbage collection of wls. The Batch file is executing wls script for garbage collectio
-
Printing to PS does not retain previous file location
I have just upgraded from CS3. My workflow when preparing files for the printer is to print to postscript file, then use distiller to convert the file to pdf for sending. CS3 retained the file location, so that each time I performed the same action,