Nexus 3524 support vpc feature?

Hi, I read that the Nexus 3524 does not support VPC feature, somebody can confirm me this,
Thanks you in advanced.

The Nexus 3524 does have vPC support. You have to enable it; it is not enabled by default.
(config)#feature vpc

Similar Messages

Nexus 3548 couldn`t enable vPC feature

Hello All,
I have to implement to 2 Nexus 3548 switches for a customer. The customer like to use it as core-switch (small LAN) and also like to run VPC feature. Now I have tried to active it, but I got the follow error message:
Enter configuration commands, one per line. End with CNTL/Z.
chefan-swi01(config)# feature vpc
Error: vPC feature is not supported
Is their a way to get VPC working on these plattform?
Software
BIOS:      version 1.9.0
loader:    version N/A
kickstart: version 5.0(3)A1(1)
system:    version 5.0(3)A1(1)
power-seq: Module 1: version v2.1
BIOS compile time:       10/13/2012
kickstart image file is: bootflash:/n3500-uk9-kickstart.5.0.3.A1.1.bin
kickstart compile time: 11/2/2012 1:00:00 [11/02/2012 09:53:29]
system image file is:    bootflash:/n3500-uk9.5.0.3.A1.1.bin
system compile time:     11/2/2012 1:00:00 [11/02/2012 10:27:12]
Hardware
cisco Nexus 3548 Chassis ("48x10GE Supervisor")
Intel(R) Pentium(R) CPU @ 1 with 4140896 kB of memory.
Processor Board ID FOC17480ZHN
Device name: chefan-swi01
bootflash:    2007040 kB
Thx a lot for any suggestions.
Kind Regards, Ferdi

Seems to be an error on the Nexus 3k product page. We had a customer who purchased these for VPC support.
http://www.cisco.com/en/US/products/ps11541/index.html
Nexus 3500 Features
Ultra-Low Latency
Line-rate layer 2 and 3 switching at ultra-low latencies
Ideal for high-performance trading workloads
Mission-Critical Features
Network Address Translation (NAT)
Virtual Port Channel
IEEE-1588 PTP

Prime InfraStructure 2.2 - Support of Nexus 3524 model

Hello Community,
I am trying to find but I am not sure if Nexus 3524 is supported on Cisco Prime Infrastructure 2.2
Please can someone clarify?
thanks in advance,
G

Hi ,
Cisco Nexus 3548 Switch OID:1.3.6.1.4.1.9.12.3.1.3.1238 (NX-OS\(tm\)), IOS
yes , it is supported , you can check the below link::
http://www.cisco.com/c/en/us/support/cloud-systems-management/prime-infrastructure/products-device-support-tables-list.html
Thanks-
Afroz
**Ratings Encourages Contributors ****

Does CSR 1000v support HA feature & how?

Does CSR 1000v support HA feature?
I noticed that redundancy command support in configuration mode,but neither sso/ha mode can config,
Router(config-red)#?
Redundancy configuration commands:
default Set a command to its defaults
exit Exit from redundancy configuration mode
main-cpu Enter main-cpu mode
mode redundancy mode for this chassis
no Negate a command or set its defaults
timer Select a timer to configure
Router(config-red)#mode ?
none no redundancy
Router#show platform
Chassis type: CSR1000V
Slot Type State Insert time (ago)
R0 CSR1000V ok, active 00:18:57
F0 CSR1000V ok, active 00:18:57
Is it possible to enable HA feature in csr1000v?
I noticed that in startup, R1 was insert，but not online，which was in disabled state.

Alan,
HA provided across a network segment within AWS is not a simple solution due to the restrictions that they place on the L2 segments. As an example, here is Amazon's suggestion for NAT HA:
http://aws.amazon.com/articles/2781451301784570
With that said, we're working on documenting a solution that will work around some of the restrictions through overlaid connections. At a high level, one way that you can do this is with a couple of CSR1000Vs connected via a GRE tunnel over their Amazon segment. You then would have to setup BFD and configure an EEM script to watch for a peer down event. This script would then have to modify the AWS VPC Routing table (the VPC gateway) so that the hosts use the appropriate CSR as an exit point. The unfortunate piece is that from the CSR1000V we cannot call the AWS API directly so this requires use of a second EEM script to SSH to a helper VM and execute the AWS VPC commands. Hopefully within the next couple of weeks we will have a configuration guide to step through the individual components, as there are many moving parts. At a high level this solution was presented in the Cisco Live session BRKARC-2023 around slides 35-40 (Session PDF) are some of the network diagrams and an example of the EEM script.
With that said, another solution that you might consider is Cisco InterCloud:
http://www.cisco.com/c/en/us/td/docs/solutions/Hybrid_Cloud/InterCloud/InterCloud/Cirrus_2.html
This allows for a secure Layer 2 extension from your data center into the public cloud which could remove some complexity in dealing with the AWS infrastructure. This solution is not one that would be for the one off, single CSR type deployment, however if you are looking at scale it could be a good alternative.
As for TAC support with the Advanced License, this is the hourly paid model that we have within Amazon. Support for this type of licensing is currently only offered through the support forum, however we are looking at other options that could allow direct TAC engagement on a case by case basis rather than a term license. Depending on where you are at with regards to your deployment it may be appropriate to engage your Cisco Account Team to help determine which solution is best for you. I can help track them down if you want to send me a private message.
-Nick

Nexus 3172 support VXLAN?

who knows Nexus 3172 support VXLAN or not?Is it need specify the version or specify license?
I find Nexus 3172 is support VXLAN at CISCO Nexus 3100 compare modules,but in Nexus 3172 datasheet didn't detail and i can't find Nexus 3172 VXLAN configuration guide.
thanks.

Did you get any further, Michael? I don't get my custom viewer app to run on Nexus as well, and I tried some different steps like:
1. rebuilding the android app from the scratch (not updating/managing an old one)
2. Activating strict resolutions of 1280x800 and 1024x600 for android devices (the new checkbox)
3. deactivating features like transparent scroll-areas and Bookmarks
None of this helped. Neither the APK in Google Play not newly created v22 APKs seem to work on Nexus 7. They just crash.
Another thread we are talking about this issue is here: http://forums.adobe.com/message/4669710#4669710
Thanks in advance,
Richard

Do we have any third party FLEX component libraries to support accessibility feature for all the components(like: ViewStack, ToggleButtonBar, charts and etc..) ?

I am working on FLEX 4.6 SDK it provides 35 components with built in accessibility support. My Application contains some components which have no built in accessibility support but I need to provide accessibility support for those components too. I have gone through the Flex docs to customize the non accessible components to support accessibility feature, But the docs where not clear. To customize a single component I have to overwrite lot of code in SDK level.
and it takes lot of effort.
So, I would like to use FLEX component libraries which provides accessibility support for all the component.
Could you please guide me how can I provide accessibility support for other components with out putting more effort on it.
Thanks in advance...

There is already such thing in myfaces called "security context" [1]. You could find build of sandbox.jar [2]
[1] http://myfaces.apache.org/sandbox/securityContext.html
[2] http://people.apache.org/builds/myfaces/nightly/

Is Cisco Nexus 5596UP support vlan base Policing and traffic shaping on code NX OS version: 5.1(3)N1(1)

Is Cisco Nexus 5596UP support vlan base Policing and traffic shaping on code NX OS version: 5.1(3)N1(1)
where i couldn't see any police command under the policy map

I have tested this issue on another 5548UP with L3 running the same NX-OS version and get the same problem. Show CDP from the switch is not discovering devices, but the neightbors can see the 5K in question. Reboot sometimes will fix it, but not always. I suspect a problem with the software since that doesn't happen in NX-OS 5.2. The one I am using is
Software
BIOS:      version 3.6.0
loader:    version N/A
kickstart: version 5.1(3)N2(1)
system:    version 5.1(3)N2(1)

Does iPhone SDK support the feature of data transfer via Bluetooth or USB?

Hi,
I'm developing a application in which I want a feature for data transfer either using Bluetooth or USB.
Does iPhone SDK support this feature of data transfer via Bluetooth or USB?
Please help me.
Thanks.

The SDk doesn't deal with BlueTooth or USB. Your only option is wireless data. (WiFi, 3G, etc)

Does Window Embedded Compact-7 based device support VOIP features

We have to develop an application for our client.
In which we have to implement SIP Client for VOIP features on Device called X-OnePlus (Window Embedded Compact-7 based). For details, please follow this link
http://www.digitax.com/products/xone-plus-mobile-data-terminal.html
We tried to write script with C# but didn't get much success and we also tried to integrate various SIP based Softphones but they are not compatible with WinCE-7.
Following are the details of SoftPhone followed by us:
Sjphone: SJphone CE .cab (http://www.sjlabs.com/sjp.html)
Could you please suggest us on followings:
1. Does Window Embedded Compact-7 based device support VOIP features?
Thanks,

This forum is for POSReady. Please try one of the Windows CE forums:
http://social.msdn.microsoft.com/Forums/en-US/category/windowsembeddedcompact
-Sean
www.annabooks.com / www.seanliming.com / Book Author - Pro Guide to WE8S, Pro Guide to WES 7, Pro Guide to POS for .NET

Does Acrobat XI Pro support the feature of syncing settings in Creative Cloud?

Does Acrobat XI Pro support the feature of syncing settings in Creative Cloud? I downloaded this software from my Creative Cloud account but I do not find the sync settings option in it. Is this feature not available?

No it doesn't.
Acrobat isn't part of the Creative Cloud product range, it is included in the CC subscription packages but it doesn't include features of the "... CC" products such as Sync or Typekit.

NEXUS 9K SUPPORT RSPAN

NEXUS-9K supports RSPAN or not? if support kindly give some reference link and configuration guide.

Richard,
The Nexus 9K FEX uplink ports are configured utilizing a standard fex-fabric associated port-channel configuration. I am utilizing the "channel-group 101" command (no mode on or passive or active) on the switch ports (e1/46, e1/47) for the FEX module uplinks. The FEX modules (N2K-2248-TP-1GE) are being utilized for normal "copper" 1Gi access/trunk edge level switch ports for server management NIC's (ILO, KVM). I am not seeing any discards or drops from the interfaces (e1/46, e1/47) being used as the 10Gi uplink ports for the FEX modules. Thanks for the reply.
Regards, Mark S.

Remote Support Component Features Video

Please check out the new remote support component features video. The video is around 7 minutes long and provides a general overview of the functionlity included with the add-on.
http://www.youtube.com/watch?v=okjbnjAvkJ8

Some additional input in addition to Henry's
1) I see content for Businessobjects XI 3.1, what about 4?
Support for BI Platform 4.x is targeted for Q2 2012
2) I do not see any content to monitor Data Services and databases connected to data services?
Support for database monitoring (database specific metrics) is planned for a future version. However, you can monitor the database process itself along with operating system metrics such as cpu, memory, disk i/o, network stats etc. With Solution Manager however, you can monitor database internals via dbacockpit tool.
4) Is there any content to monitor disk space, database instances, database sizes/growth?
See #2
3) Is it possible to create dashboards, add content of your own for monitoring anything not provided as shown above?
Yes, however you need to purchase a license for CA Wily Introscope. The remote support component is totally free therefore its a view only version. However, with a CA license you may customize or add content as you see fit.
The enhancement you request is already planned however if you could go to the [Idea Place|https://cw.sdn.sap.com/cw/community/ideas/businessanalytics/sbo_rsc] and vote for this enhancement it will certainly help increase the priority.
If you have more queries or concerns please feel free to post more feedback.
Thanks,
Toby Johnston
SAP America, Inc.

Photos/Fotos: One of the most important selection features the is "Star" rating. How on earth can you stop supporting this feature ???

One of the most important selection features the is "Star" rating.
How on earth can Apple stop supporting this feature ???
My iPhoto lib contains >100´000 photos. All of them are rated with stars. Dependent on the rating I distribute the photos on >20 apple devices in our family.
Many friends of mine do the same.
It´s time for a severe request to Apple to take over that feature from iPhoto to Photos. They should start to learn, that people that liked their previously released software have spent hundreds of hours to adapt their data with that software to their needs. I´m using Mac´s since 1984. Might be that I start thinking about using different systems if they continue to through away my efforts from the past...
If you dislike Apples latest moves and like this feature too you need to provide feedback to them on the following web page: www.apple.com/feedback
Horst

Remember that star ratings are not part of standard metadata.

Will IPhone 4s support all features of IOS7

Will IPhone 4s support all features of IOS7

You can read all that is known about ios 7 on Apples website

Cisco Nexus 5548UP support SFP-10G-LRM ?

Hi all, I have a question about Cisco Nexus 5548UP. Is Cisco Nexus 5548UP support SFP-10G-LRM ? Because in CCW, i can't configure the SFP-10G-LRM. There is only SFP-10G-LR, SR, and the others, but there's no LRM. Pelase help me to answer this question. Thanks a lot

The LRM is s special case transceiver which supports 10 Gbps over older FDDI grade multimode fiber when used with a mode conditioning patch cord. It is not supported on the Nexus 5548UP.
The SFP-10G-LR is used with single mode fiber for spans up to 10 km in length. It is supported on the 5548UP (and most every platform of Cisco's that takes SFPs).
Please see the product data sheet here.

Nexus 3524 support vpc feature?

Similar Messages

Maybe you are looking for