Nexus 5010 to Cat 6506 Sup720 using 1GB ports
Hi,
Our budget just got cut in half--sign of the times! Can I connect a Nexus 5010 to a 6506 with 6724-SFP module using a 6GB etherchannel? The 6506 has a Sup 720 and will only be used to route the VLANs. All server swithing will be done through the Nexus 5010 and 2148T.
Thanks,
hi Isabel,
>> Jul 5, 2009, 9:14am PST
>> Both the Nexus 5000 and Nexus 7000 will add support for a
>> feature called Virtual Port Channels (VPC) which allows
>> the formation of multi-chassis ether channels like that
>> with VSS on the Catalyst 6500.
Nexus 7000 has had virtual Port Channel (vPC) since the release of NX-OS 4.2 around January this year.
see http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9402/white_paper_c11-516396.html
you are correct that Nexus 5000 doesn't yet have this. N5K will gain vPC when NX-OS 4.2 is released on N5K in/on/around Q3 CY2009.
cheers,
lincoln.
Similar Messages
-
Connecting a WS-C4948 to a Nexus 5010
is it possible to connect a WS-C4948 switch to a Nexus 5010? I have a flat network with no vlans.I know you are suppose to use the first 8 ports of the Nexus to get it to be on a 1GB port. What gbic am i to use on the ws-c4948 switch? if using a fiber cable or a rj45 cable?
I was able to get it to work.....thank you for the guys who responded!!
configuration on the WS-C4948:
interface GigabitEthernet1/48
description connection to nexus5010
media-type rj45
interface Vlan1
ip address 10.x.x.226 255.0.0.0
ip default-gateway 10.x.x.1
configuration on the Nexus 5010:
vrf context management
vlan 1
interface Vlan1
no shutdown
ip address 10.x.x.223/8
interface Ethernet1/1
switchport mode trunk
speed 1000
steps on adding vlan 1 and adding an IP address on the Nexus 5010:
- remove int mgmt 0, ip address and vrf context management
nexus5010(config)# int mgmt 0
nexus5010(config-if)# no ip address
nexus5010(config-if)# vrf context management
nexus5010(config-vrf)# no ip route 0.0.0.0/0 10.x.x.1
nexus5010(config-vrf)# exit
- turn on feature interface-vlan, create int vlan 1, add IP address, no shut, add vrf context default
nexus5010(config)# feature interface-vlan
nexus5010(config)# int vlan 1
nexus5010(config-if)# ip address 10.x.x.223/8
nexus5010(config-if)# no shut
nexus5010(config-if)# exit
nexus5010(config)# vlan 1
nexus5010(config-vlan)# exit
nexus5010(config)# vrf context default
nexus5010(config)# ip route 0.0.0.0/0 10.x.x.1
nexus5010(config)# exit -
LMS 3.2: RME failed archive with Nexus 5010
Hi,
LMS 3.2, RME 4.3.1, dev packages updated, Windows.
We would like to archive the configuration of the Nexus 5010 switches. Due to authentication with Radius based on tokens we're not able to use telnet/SSH and therefore we only can use SNMP WRite in combination with TFTP. But, this is not working at all. Other systems like 3750 works fine. Is there a difference between Catalysts IOS and nexus NXOS?
I searched the forum and found this:
https://supportforums.cisco.com/message/663481#663481
upgrade to LMS 2.6, archive config not working anymore
We ship and start a TFTP server by default on Windows. You must have an SNMP read-write community string configured on your devices, and entered in DCR for TFTP config fetches to work. Additionally, udp/69 must be open between device and server.
The easiest way to troubleshoot this kind of problem is to start a sniffer trace on the LMS server (using Device Center > Packet Capture). Filter on all traffic to one of the failing devices. Then, run a Sync Archive job for that same device. When it fails, the sniffer trace will indicate what the problem is
Regards
Ad OlsthoornHi Lavramov,
Yes I'm quite sure, I installed the required packages acoording to the Nexus.RME431.v2-2.readme.pdf manual. the manual tell me to install the following (see also attachement).
To install the Cisco Nexus Series Package, you must install the following dependent packages:
- SharedDcmaSS.RME431.v2-2.zip
- SharedInventoryMDS.RME431.v1-5-1.zip
- SharedSwimMDS9000.RME431.v1-6-1.zip
- SharedNetshowSS.RME431.v1-1.zip
regards
Ad -
Can't archive nexus 5010 configs (LMS 3.2)
Using LMS 3.2 I can't archive configs from
our Nexus 5010 ( 4.2(1)N1(1) ) devices . I have installed
the necessary device package Nexus.RME431.v2-4.zip. Following error occures:
*** Device Details for gf02na50050p ***
Protocol ==> Unknown / Not Applicable
Selected Protocols with order ==> SSH,SCP,TFTP,RCP,Telnet
Execution Result:
RUNNING
CM0151 PRIMARY RUNNING Config fetch failed for gf02na50050p Cause: Failed to fetch config using TFTPFailed to establish TELNET connection to 10.92.170.214 - Cause: Connection refused.
Action: Check if protocol is supported by device and required device package is installed. Check device credentials. Increase timeout value, if required.
Telnet on device is disabled, SSH enabled.
with only SSH on RME followig error:
*** Device Details for gf02na50050p ***
Protocol ==> Unknown / Not Applicable
Selected Protocols with order ==> SSH
Execution Result:
RUNNING
CM0151 PRIMARY RUNNING Config fetch failed for gf02na50050p Cause: Failed to get the start tag-Building Configuration ... in the configuration. Action: Check if protocol is supported by device and required device package is installed. Check device credentials. Increase timeout value, if required.
Thanks
IgorRME 4.3.1; windows platform
with one customer I have the same issue with a Nexus 5020. Software version is :
Software
BIOS: version 1.3.0 [last: ]
loader: version N/A
kickstart: version 4.2(1)N2(1)
system: version 4.2(1)N2(1)
power-seq: version v1.2
BIOS compile time: 09/08/09 [last: ]
kickstart image file is: bootflash:///n5000-uk9-kickstart.4.2.1.N2.1.bin
kickstart compile time: 7/28/2010 18:00:00 [07/29/2010 03:10:19]
system image file is: bootflash:/n5000-uk9.4.2.1.N2.1.bin
system compile time: 7/28/2010 18:00:00 [07/29/2010 07:18:12]
Hardware
cisco Nexus5020 Chassis ("40x10GE/Supervisor")
Intel(R) Celeron(R) M CPU with 2074284 kB of memory.
===============
following RME packages are installed:
SharedNetshowSS 1.1.2 SharedNetshowSS device package
SharedSwimMDS9000 1.6.3 SharedSwimMDS9000 device package
SharedInventoryMDS 1.5.1 SharedInventoryMDS device package
SharedDcmaSS 2.2.2 SharedDcmaSS device package
Nexus 2.4 Nexus device package
===============
>>> I see the following problems with SSH instrumentation of the Nexus Platform when looking into the debug file. The file I got is more or less the same then the one Marc posted.
The customer does not have a banner configured so the standard login procedure shows the following when login is done manually. RME automatically interpretes the first line after "Login as: " as a banner...
login as: Nexus
Nexus 5000 Switch
Using keyboard-interactive authentication.
Password:
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2010, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
devicename#
>>> and RME wants to take the last line as the prompt, resulting in a non-fatal java exception:
[line 1471 ff.]
[ Mon Aug 30 08:58:01 CEST 2010 ],DEBUG,[Thread-38],com.cisco.nm.xms.xdi.transport.cmdsvc.LogAdapter,debug,31,Learning prompt: sA[0] == 'http://www.opensource.org/licenses/lgpl-2.1.php'
[ Mon Aug 30 08:58:01 CEST 2010 ],DEBUG,[Thread-38],com.cisco.nm.xms.xdi.transport.cmdsvc.LogAdapter,debug,31,Learning prompt: sA[1] == ''
[ Mon Aug 30 08:58:01 CEST 2010 ],DEBUG,[Thread-38],com.cisco.nm.xms.xdi.transport.cmdsvc.LogAdapter,printStackTrace,51,stacktracecom.cisco.nm.lib.cmdsvc.CmdSvcException: Prompt learning failed: 'http://www.opensource.org/licenses/lgpl-2.1.php' && '' do not match.
at com.cisco.nm.lib.cmdsvc.Session.tune(Session.java:904)
at com.cisco.nm.lib.cmdsvc.Session.tune(Session.java:833)
at com.cisco.nm.lib.cmdsvc.AuthHandler.connect(AuthHandler.java:267)
at com.cisco.nm.lib.cmdsvc.OpConnect.invoke(OpConnect.java:56)
at com.cisco.nm.lib.cmdsvc.SessionContext.invoke(SessionContext.java:299)
>> Ok, RME proceeds, but the SSH implementation (SharedDcmaSS ?) cannot extract the config and a java exception occures which leads to "Closing the session":
[ Mon Aug 30 08:58:06 CEST 2010 ],DEBUG,[Thread-38],com.cisco.nm.xms.xdi.transport.cmdsvc.LogAdapter,debug,31,Returning from Session.send('show startup-config
[ Mon Aug 30 08:58:06 CEST 2010 ],DEBUG,[Thread-38],com.cisco.nm.xms.xdi.transport.cmdsvc.LogAdapter,debug,31,in trimPrompt(), prompt == ''
[ Mon Aug 30 08:58:06 CEST 2010 ],DEBUG,[Thread-38],com.cisco.nm.xms.xdi.pkgs.LibDcma.persistor.CliOperator,fetchConfig,490,Failed to get the start tag-Building Configuration ... in the configuration.com.cisco.nm.xms.xdi.ags.config.ConfigTransportException: Failed to get the start tag-Building Configuration ... in the configuration.
at com.cisco.nm.xms.xdi.pkgs.SharedDcmaSS.transport.SSCliOperator.extractConfig2Buffer(SSCliOperator.java:176)
at com.cisco.nm.xms.xdi.pkgs.LibDcma.persistor.CliOperator.fetchConfig(CliOperator.java:436)
at com.cisco.nm.xms.xdi.pkgs.LibDcma.persistor.CliOperator.fetchConfig(CliOperator.java:510)
at com.cisco.nm.xms.xdi.pkgs.LibDcma.persistor.SimpleFetchOperation.performOperation(SimpleFetchOperation.java:61)
at com.cisco.nm.xms.xdi.pkgs.LibDcma.persistor.ConfigOperation.doConfigOperation(ConfigOperation.java:111)
at com.cisco.nm.xms.xdi.pkgs.SharedDcmaSS.transport.SSConfigOperator.fetchConfig(SSConfigOperator.java:65)
at com.cisco.nm.rmeng.dcma.configmanager.ConfigManager.updateArchiveForDevice(ConfigManager.java:1315)
at com.cisco.nm.rmeng.dcma.configmanager.ConfigManager.performCollection(ConfigManager.java:3291)
at com.cisco.nm.rmeng.dcma.configmanager.CfgUpdateThread.run(CfgUpdateThread.java:27)
[ Mon Aug 30 08:58:06 CEST 2010 ],DEBUG,[Thread-38],com.cisco.nm.xms.xdi.pkgs.LibDcma.persistor.SimpleFetchOperation,performOperation,62,FetchStatus - FAILURE for Protocol SSH for device x.x.x.x
>> As telnet and tftp are not allowed the config cannot be archived (Customer reports no problems with telnet...)
The config itself starts and ends with the following lines:
devicename# show startup-config
!Command: show startup-config
!Time: Mon Sep 6 16:41:02 2010
!Startup config saved at: Mon Aug 16 15:41:39 2010
version 4.2(1)N2(1)
no feature telnet
no telnet server enable
no feature http-server
cfs eth distribute
feature udld
feature interface-vlan
feature lacp
feature vpc
feature lldp
feature vtp
interface mgmt0
shutdown force
shutdown force
no snmp trap link-status
no snmp trap link-status
clock timezone MEZ 1 0
clock summer-time MEZS 5 sun mar 02:00 5 sun oct 03:00 60
line console
boot kickstart bootflash:/n5000-uk9-kickstart.4.2.1.N2.1.bin
boot system bootflash:/n5000-uk9.4.2.1.N2.1.bin
ip route 0.0.0.0/0 172.16.4.1
vtp mode transparent
vtp domain sap
logging server x.x.x.x 7 use-vrf default
logging server y.y.y.y 7 use-vrf default
devicename#
For me it looks like as a bug in the ssh implementation in RME, but I cannot find a bug id on CCO .... -
Cisco Nexus 5010 FCOE Interconnection
Hi, i would really apreciate your help on this doubt.
Is it possible to create a link between two cisco nexus 5010
using CNA interfaces ?
I've already configured the ethernet interfaces(where the cna is plugged in),
i've binded the E1/2, mapped the vsan, created specific traffic vlan, and so on ...
I have tried everything what's written in the manual but the vcf interface won't set up, keeps telling me "vcf is down" .
What am i doing wrong ? or this connection is imposible ...
Thanks in advance.5020A.1# show vlan fcoe
Original VLAN ID Translated VSAN ID Association State
100 100 Operational
5020A.1# sho feature | grep np
npiv 1 disabled
npv 1 enabled
5020A.1# sho interface brief | grep -i fc
fc2/3 100 NP off up swl NP 4 --
fc2/4 100 NP off up swl NP 4 --
vfc15 100 F on trunking -- TF auto --
!!!here's vfc15 and it's associated interface
5020A.1# sho run int vf15
!Command: show running-config interface vfc15
!Time: Thu Feb 17 12:45:29 2011
version 5.0(2)N2(1)
interface vfc15
bind interface Ethernet1/15
no shutdown
5020A.1# show inter e1/15 status
Port Name Status Vlan Duplex Speed Type
Eth1/15 FCoE ports connected trunk full 10G 1/10g
5020A.1# sho run int e1/15
!Command: show running-config interface Ethernet1/15
!Time: Thu Feb 17 12:45:33 2011
version 5.0(2)N2(1)
interface Ethernet1/15
description FCoE ports
switchport mode trunk
switchport trunk allowed vlan 1,10,30,100
spanning-tree port type edge trunk
load-interval counter 2 30
load-interval counter 3 30
5020A.1#
5020A.1#
5020A.1#
I'd use this to get a look at FIP
ethanalyzer local sniff-interface inbound-hi detailed-dissection display-filter vlan.etype==0x8914 limit-captured 200 write bootflash:fipcap1.pcap
This is assuming that your eth1/2 is working and up.
reply w/your associated show commands
show fcoe vlan
show feature | grep np
show interface brief | grep -i fc
show vsan
sho run inter vfc x
show run inter eth x/y
show inter eth x/y status
other questions
1. what OS?
2. what vendor of CNA card?
Joe -
Private Vlan, Etherchannel and Isolated Trunk on Nexus 5010
I'm not sure if I'm missing something basic here however i though that I'd ask the question. I recieved a request from a client who is trying to seperate traffic out of a IBM P780 - one set of VIO servers/clients (Prod) is tagged with vlan x going out LAG 1 and another set of VIO server/clients (Test) is tagged with vlan y and z going out LAG 2. The problem is that the management subnet for these devices is on one subnet.
The infrastructure is the host device is trunked via LACP etherchannel to Nexus 2148TP(5010) which than connects to the distribution layer being a Catalyst 6504 VSS. I have tried many things today, however I feel that the correct solution to get this working is to use an Isolated trunk (as the host device does not have private vlan functionality) even though there is no requirement for hosts to be segregated. I have configured:
1. Private vlan mapping on the SVI;
2. Primary vlan and association, and isolated vlan on Distribution (6504 VSS) and Access Layer (5010/2148)
3. All Vlans are trunked between switches
4. Private vlan isolated trunk and host mappings on the port-channel interface to the host (P780).
I haven't had any luck. What I am seeing is as soon as I configure the Primary vlan on the Nexus 5010 (v5.2) (vlan y | private-vlan primary), this vlan (y) does not forward on any trunk on the Nexus 5010 switch, even without any other private vlan configuration. I believe this may be the cause to most of the issues I am having. Has any one else experienced this behaviour. Also, I haven't had a lot of experience with Private Vlans so I might be missing some fundamentals with this configuration. Any help would be appreciated.Hello Emcmanamy, Bruce,
Thanks for your feedback.
Just like you, I have been facing the same problematic last months with my customer.
Regarding PVLAN on FEX, and as concluded in Bruce’s previous posts I understand :
You can configure a host interface as an isolated or community access port only.
We can configure “isolated trunk port” as well on a host interface. Maybe this specific point could be updated in the documentation.
This ability is documented here =>
http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/layer2/513_N2_1/b_Cisco_n5k_layer2_config_gd_rel_513_N2_1_chapter_0101.html#task_1170903
You cannot configure a host interface as a promiscuous port.
You cannot configure a host interface as a private VLAN trunk port.
Indeed a pvlan is not allowed on a trunk defined on a FEX host interface.
However since NxOS 5.1(3)N2(1), the feature 'PVLAN on FEX trunk' is supported. But a command has to be activated before => system private-vlan fex trunk . When entered a warning about the presence of ‘FEX isolated trunks’ is prompted.
http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/layer2/513_N2_1/b_Cisco_n5k_layer2_config_gd_rel_513_N2_1_chapter_0101.html#task_16C0869F1B0C4A68AFC3452721909705
All these conditions are not met on a N5K interface.
Best regards.
Karim -
Nexus (5010) To FEX Distance Limitations
Hello,
My question is concerning the software-imposed distance limitations for Nexus-to-Fex connections.
With a Nexus 5010 running 4.2 (1) N1 (1) code, I believe there is a software limitation on the distance the FEX can be located from the Nexus. I have two questions concerning this:
Is there any log data, or a cli command, to verify that the fex connection has exceeded that distance?
What symptoms are produced when the fex is too far from the Nexus (ie, does the link come up but the image not load?)
I would like to determine that the reason I have a FEX, located in a second data centre, that is not coming up is actually related to the distance from the FEX to the Nexus and not related to some other problem.
Thanks for any suggestions/info offerred.
SimonI have not seen any reference to a software limitation for the distance between a N5K and a FEX.
The release notesfor 4.2(1)N1) listed si not showing it unless, my first cup of coffee has not kicked in
http://http://www.cisco.com/en/US/partner/docs/switches/datacenter/nexus5000/sw/configuration_limits/limits_421/Cisco_Nexus_5000_Series_Configuration_Limits_for_Cisco_NX_OS_Release_421_N1_1_and_421_N2_1_chapter1.html
As far as believe the only distance limitation would be the type of cable used. Either the distance limitation of the SMF SFP or the MMF SFP, or the CX ethernet cable which has reletively short distance spans.
Where is you here about this limitation?
And more importantly, what issues are you have towards the FEX? -
Is there any difference between 5010/20 and 5548 in functionality for NAS?
I am using Nexus 5010 between UCS FIC and Array.
I am aware of the differences in port density, unified ports, L3 support etc etc.
Fundamentally what do I loose if I am just testing using 5010 compared to 5548.Hi Steve,
Thanks for the reply, this is the version currently running on the Nexus 5K:
Software
BIOS: version 1.5.0
loader: version N/A
kickstart: version 5.1(3)N2(1b)
system: version 5.1(3)N2(1b)
power-seq: Module 1: version v1.2
BIOS compile time: 11/30/10
kickstart image file is: bootflash:///n5000-uk9-kickstart.5.1.3.N2.1b.bin
kickstart compile time: 8/31/2012 17:00:00 [08/31/2012 17:30:27]
system image file is: bootflash:///n5000-uk9.5.1.3.N2.1b.bin
system compile time: 8/31/2012 17:00:00 [08/31/2012 18:29:34]
Regards,
-Michael -
Slow iMac, kernel_task using 1GB memory
My iMac has been running slower and slower over the past year or so. The problem seems to come and go, but I have been noticing increasing tendency for applications to hang, or to get stuck for minutes with spinning beach balls. I've been carrying forward software and installations going all the way back to OS X 10.0 (from previous machines) and I probably have made some poor choices regarding installing third-party software in the past.
I've seen some very helpful advice in this forum given to others (for example, here) so I thought I would post my problem here.
I've been watching Activity Monitor, and the only thing I've noticed that seems consistently out of place is that kernel_task is using about 1GB of RAM. (It was using about 2GB of RAM until I uninstalled Virtual Box, which clearly was a big part of my problems).
I am fully backed up redundantly (locally via Time Machine and remotely via BackBlaze). I'm holding off upgrading to Yosemite until I can clean this issue up (unless you think it would help).
Below you will find posted two diagnostic reports. The first is EtreCheck, followed by the results of the Terminal script posted by Linc Davis in this thread
I hope that's sufficient to help the geniuses reading this forum give me some advice. Thank you in advance for your help.
================
ETRE CHECK
=================
Problem description:
slow computer, kernel_task using 1GB memory
EtreCheck version: 2.0.6 (91)
Report generated October 27, 2014 at 8:42:21 PM PDT
Hardware Information: ℹ️
iMac (27-inch, Mid 2011) (Verified)
iMac - model: iMac12,2
1 3.1 GHz Intel Core i5 CPU: 4-core
12 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
BANK 0/DIMM1
4 GB DDR3 1333 MHz ok
BANK 1/DIMM1
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6970M - VRAM: 1024 MB
iMac 2560 x 1440
Apple Cinema Display 1680 x 1050
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 7 days 22:48:12
Disk Information: ℹ️
Hitachi HDS722020ALA330 disk0 : (2 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 2 TB (818.80 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5680H
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple, Inc. Keyboard Hub
Razer Razer DeathAdder
Apple, Inc Apple Keyboard
Apple Inc. iPhone
S.M.A.R.T. Status: Verified
Apple Inc. iPod
Canon CanoScan
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
American Power Conversion Back-UPS ES 750 FW:841.I3 .D USB FW:I3
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
Firewire Information: ℹ️
OWC Mercury Elite-AL Pro unknown_device 800mbit - 800mbit max
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted> : 210 MB
OWC Time Capsule (disk1s2) /Volumes/OWC Time Capsule : 2 TB (57.75 GB free)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/LogMeIn/drivers
[loaded] com.logmein.driver.LogMeInSoundDriver (1.0.3 - SDK 10.5) Support
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.2) Support
[not loaded] com.palm.ClassicNotSeizeDriver (3.2.1) Support
[loaded] com.razer.driver.RazerDeathAdderDriver (2.0.2) Support
[not loaded] com.tomtom.driver.UsbEthernetGadget (1.0.0d1) Support
[not loaded] com.wdc.driver.1394HP (1.0.5) Support
[not loaded] com.wdc.driver.USBHP (1.0.2) Support
[loaded] jp.plentycom.driver.SteerMouse (4.0.2) Support
[not loaded] net.pocketmac.driver.BlackberryUSB (2.0.2) Support
[not loaded] net.pocketmac.driver.BlackberryUSBDev (2.0.2) Support
Startup Items: ℹ️
ChmodBPF: Path: /Library/StartupItems/ChmodBPF
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[invalid?] com.cisco.anyconnect.gui.plist Support
[loaded] com.citrix.AuthManager_Mac.plist Support
[running] com.citrix.ReceiverHelper.plist Support
[running] com.citrix.ServiceRecords.plist Support
[loaded] com.google.keystone.agent.plist Support
[invalid?] com.logmein.LMILaunchAgentFixer.plist Support
[not loaded] com.logmein.logmeingui.plist Support
[not loaded] com.logmein.logmeinguiagent.plist Support
[not loaded] com.logmein.logmeinguiagentatlogin.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.razer.DeathAdder.Daemon.plist Support
[running] com.symantec.ev.daemon.plist Support
[loaded] org.macosforge.xquartz.startx.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.backblaze.bzserv.plist Support
[loaded] com.barebones.authd.plist Support
[loaded] com.barebones.textwrangler.plist Support
[loaded] com.bombich.ccc.plist Support
[not loaded] com.bombich.ccc.scheduledtask.869BF412-1824-4F8C-A551-8A7FE5394255.plist Support
[not loaded] com.bombich.ccc.scheduledtask.CEBED225-0D54-453F-8068-8F1BE50D016D.plist Support
[running] com.cisco.anyconnect.vpnagentd.plist Support
[running] com.freemacsoft.appcleanerd.plist Support
[failed] com.google.GoogleML.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.leapfrog.connect.authdaemon.plist Support
[not loaded] com.logmein.logmeinblanker.plist Support
[not loaded] com.logmein.logmeinserver.plist Support
[invalid?] com.logmein.raupdate.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.rogueamoeba.hermes.plist Support
[loaded] org.macosforge.xquartz.privileged_startx.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[running] com.backblaze.bzbmenu.plist Support
[invalid?] com.citrixonline.GoToMeeting.G2MUpdate.plist Support
[invalid?] com.google.Chrome.framework.plist Support
[running] com.leapfrog.connect.monitor.plist Support
[not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
[not loaded] ws.agile.1PasswordAgent.plist Support
User Login Items: ℹ️
HyperDock Helper Application (/Library/PreferencePanes/HyperDock.prefpane/Contents/Resources/HyperDock Helper.app)
Dropbox Application (/Applications/Dropbox.app)
EvernoteHelper Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.4.2.18903 Support
Google Earth Web Plug-in: Version: 6.0 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.4.2.4 Support
net.juniper.DSSafariExtensions: Version: (null) Support
mb: Version: (null) Support
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
CitrixICAClientPlugIn: Version: 11.8.2 - SDK 10.7 Support
googletalkbrowserplugin: Version: 5.4.2.18903 Support
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 65 Check version
User Internet Plug-ins: ℹ️
ATTConnectEventEntry: Version: 1.0.3 - SDK 10.6
OctoshapeWeb: Version: 1.0 Support
WebEx64: Version: 1.0 - SDK 10.6 Support
WebEx: Version: 1.0 Support
ATTConnectWCPlugin1_0_6: Version: 1.0.6 Support
Picasa: Version: 1.0 Support
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
Safari Extensions: ℹ️
1Password
OpenIE
3rd Party Preference Panes: ℹ️
Application Enhancer Support
Backblaze Backup Support
Enterprise Vault Support
Flash Player Support
Flip4Mac WMV Support
Growl Support
HyperDock Support
Java Support
MacFUSE Support
MusicManager Support
Perian Support
SteerMouse Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 2 TB Disk used: 1 TB
Destinations:
OWC Time Capsule [Local]
Total size: 2 TB
Total number of backups: 121
Oldest backup: 2012-12-17 08:56:36 +0000
Last backup: 2014-10-28 03:08:23 +0000
Size of backup disk: Too small
Backup size 2 TB < (Disk used 1 TB X 3)
Top Processes by CPU: ℹ️
7% Microsoft Outlook
3% WindowServer
3% JavaAppLauncher
3% find
1% Google Chrome
Top Processes by Memory: ℹ️
515 MB iPhoto
515 MB iTunes
245 MB WindowServer
232 MB Finder
219 MB Google Chrome
Virtual Memory Information: ℹ️
552 MB Free RAM
4.56 GB Active RAM
2.98 GB Inactive RAM
1.87 GB Wired RAM
93.91 GB Page-ins
649 MB Page-outs
============================
LINC DAVIS SCRIPT
============================
Start time: 20:37:30 10/27/14
Model Identifier: iMac12,2
System Version: OS X 10.9.5 (13F34)
Kernel Version: Darwin 13.4.0
Time since boot: 7 days 22:43
SATA
Hitachi HDS722020ALA330
FireWire
Unknown Device (OWC Mercury Elite-AL Pro)
USB
Razer DeathAdder (Razer)
USB 2.0 Hub (TERMINUS TECHNOLOGY INC.)
Composite Device (Garmin International)
USB 2.0 Hub (TERMINUS TECHNOLOGY INC.)
CanoScan (Canon Inc.)
Hub (NEC Corporation)
Hub (NEC Corporation)
Log
Oct 24 23:01:28 SAM Multimedia: READ or WRITE failed, SENSE_KEY = 0x03, ASC = 0x02, ASCQ = 0x00
Oct 24 23:01:30 SAM Multimedia: READ or WRITE failed, SENSE_KEY = 0x03, ASC = 0x02, ASCQ = 0x00
Oct 24 23:01:30 disk4: I/O error.
Oct 24 23:01:33 SAM Multimedia: READ or WRITE failed, SENSE_KEY = 0x03, ASC = 0x02, ASCQ = 0x00
Oct 24 23:01:35 SAM Multimedia: READ or WRITE failed, SENSE_KEY = 0x03, ASC = 0x02, ASCQ = 0x00
Oct 24 23:01:35 disk4: I/O error.
Oct 24 23:01:39 SAM Multimedia: READ or WRITE failed, SENSE_KEY = 0x03, ASC = 0x02, ASCQ = 0x00
Oct 24 23:01:42 SAM Multimedia: READ or WRITE failed, SENSE_KEY = 0x03, ASC = 0x02, ASCQ = 0x00
Oct 24 23:01:42 disk4: I/O error.
Oct 24 23:01:47 SAM Multimedia: READ or WRITE failed, SENSE_KEY = 0x03, ASC = 0x02, ASCQ = 0x00
Oct 25 00:10:39 msdosfs_fat_uninit_vol: error 6 from msdosfs_fat_cache_flush
Oct 25 00:24:11 process iTunes[918] thread 39534 caught burning CPU!; EXC_RESOURCE supressed due to audio playback
Oct 25 08:24:45 USBF: 469798.165 AppleUSBEHCI::Found a transaction which hasn't moved in 5000 milliseconds on bus 0xfa, timing out! (Addr: 9, EP: 2)
Oct 25 08:24:52 USBF: 469805.173 AppleUSBEHCI::Found a transaction which hasn't moved in 5000 milliseconds on bus 0xfa, timing out! (Addr: 9, EP: 2)
Oct 25 08:24:58 USBF: 469811.184 AppleUSBEHCI::Found a transaction which hasn't moved in 5000 milliseconds on bus 0xfa, timing out! (Addr: 9, EP: 2)
Oct 25 08:25:05 USBF: 469818.191 AppleUSBEHCI::Found a transaction which hasn't moved in 5000 milliseconds on bus 0xfa, timing out! (Addr: 9, EP: 2)
Oct 25 08:25:12 USBF: 469825.199 AppleUSBEHCI::Found a transaction which hasn't moved in 5000 milliseconds on bus 0xfa, timing out! (Addr: 9, EP: 2)
Oct 25 08:25:18 USBF: 469831.208 AppleUSBEHCI::Found a transaction which hasn't moved in 5000 milliseconds on bus 0xfa, timing out! (Addr: 9, EP: 2)
Oct 25 08:25:25 USBF: 469838.213 AppleUSBEHCI::Found a transaction which hasn't moved in 5000 milliseconds on bus 0xfa, timing out! (Addr: 9, EP: 2)
Oct 25 08:25:32 USBF: 469845.224 AppleUSBEHCI::Found a transaction which hasn't moved in 5000 milliseconds on bus 0xfa, timing out! (Addr: 9, EP: 2)
Oct 25 08:25:39 USBF: 469852.235 AppleUSBEHCI::Found a transaction which hasn't moved in 5000 milliseconds on bus 0xfa, timing out! (Addr: 9, EP: 2)
Oct 25 08:25:46 USBF: 469859.242 AppleUSBEHCI::Found a transaction which hasn't moved in 5000 milliseconds on bus 0xfa, timing out! (Addr: 9, EP: 2)
Oct 25 08:25:53 USBF: 469866.250 AppleUSBEHCI::Found a transaction which hasn't moved in 5000 milliseconds on bus 0xfa, timing out! (Addr: 9, EP: 2)
Oct 25 10:56:09 process WindowServer[111] caught causing excessive wakeups. EXC_RESOURCE supressed due to audio playback
Oct 26 09:40:48 jnl: disk5s2: journal start/end pointers reset! (jnl 0xffffff8025f82a80; s 0x692000 e 0x698000)
Memory: kernel_task (UID 0) is using 1174 MB
kexts
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN (1.0.0d1)
com.apple.driver.AppleIntelHD3000Graphics (8.2.4)
com.apple.AMDRadeonX3000 (1.2.4)
com.logmein.driver.LogMeInSoundDriver (1.0.3)
com.Cycling74.driver.Soundflower (1.5.2)
com.razer.driver.RazerDeathAdderDriver (2.0.2)
jp.plentycom.driver.SteerMouse (4.0.2)
Daemons
org.postfix.master
org.ntp.ntpd
org.cups.cupsd
com.vix.cron
org.macosforge.xquartz.privileged_startx
com.rogueamoeba.hermes
com.oracle.java.JavaUpdateHelper
com.oracle.java.Helper-Tool
com.microsoft.office.licensing.helper
com.logmein.raupdate
com.leapfrog.connect.authdaemon
com.google.keystone.daemon
com.google.GoogleML
com.freemacsoft.appcleanerd
com.cisco.anyconnect.vpnagentd
com.bombich.ccc
com.barebones.textwrangler
com.barebones.authd
com.backblaze.bzserv
com.adobe.fpsaud
Agents
com.google.GoogleTalkPluginD.5488.UUID
com.citrix.ReceiverHelper
com.citrix.ServiceRecords
com.citrix.AuthManager_Mac
jp.co.canon.ijscanner2.scanner.ica.12528.UUID
2BUA8C4S2C.com.agilebits.onepassword4-helper
org.macosforge.xquartz.startx
com.symantec.ev.daemon
com.razer.DeathAdder.Daemon
com.oracle.java.Java-Updater
com.logmein.LMILaunchAgentFixer
com.google.keystone.system.agent
com.cisco.anyconnect.gui
com.leapfrog.connect.monitor
com.citrixonline.GoToMeeting.G2MUpdate
com.backblaze.bzbmenu
com.adobe.ARM.UUID
launchd
/Library/LaunchAgents/com.cisco.anyconnect.gui.plist
- com.cisco.anyconnect.gui
/Library/LaunchAgents/com.citrix.AuthManager_Mac.plist
- com.citrix.AuthManager_Mac
/Library/LaunchAgents/com.citrix.ReceiverHelper.plist
- com.citrix.ReceiverHelper
/Library/LaunchAgents/com.citrix.ServiceRecords.plist
- com.citrix.ServiceRecords
/Library/LaunchAgents/com.google.keystone.agent.plist
- com.google.keystone.system.agent
/Library/LaunchAgents/com.logmein.LMILaunchAgentFixer.plist
- com.logmein.LMILaunchAgentFixer
/Library/LaunchAgents/com.logmein.logmeingui.plist
- com.logmein.logmeingui
/Library/LaunchAgents/com.logmein.logmeinguiagent.plist
- com.logmein.logmeinguiagent
/Library/LaunchAgents/com.logmein.logmeinguiagentatlogin.plist
- com.logmein.logmeinguiagentatlogin
/Library/LaunchAgents/com.oracle.java.Java-Updater.plist
- com.oracle.java.Java-Updater
/Library/LaunchAgents/com.razer.DeathAdder.Daemon.plist
- com.razer.DeathAdder.Daemon
/Library/LaunchAgents/com.symantec.ev.daemon.plist
- com.symantec.ev.daemon
/Library/LaunchAgents/org.macosforge.xquartz.startx.plist
- org.macosforge.xquartz.startx
/Library/LaunchDaemons/com.adobe.fpsaud.plist
- com.adobe.fpsaud
/Library/LaunchDaemons/com.backblaze.bzserv.plist
- com.backblaze.bzserv
/Library/LaunchDaemons/com.barebones.authd.plist
- com.barebones.authd
/Library/LaunchDaemons/com.barebones.textwrangler.plist
- com.barebones.textwrangler
/Library/LaunchDaemons/com.bombich.ccc.plist
- com.bombich.ccc
/Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist
- com.bombich.ccc.scheduledtask.UUID
/Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist
- com.bombich.ccc.scheduledtask.UUID
/Library/LaunchDaemons/com.cisco.anyconnect.vpnagentd.plist
- com.cisco.anyconnect.vpnagentd
/Library/LaunchDaemons/com.freemacsoft.appcleanerd.plist
- com.freemacsoft.appcleanerd
/Library/LaunchDaemons/com.google.GoogleML.plist
- com.google.GoogleML
/Library/LaunchDaemons/com.google.keystone.daemon.plist
- com.google.keystone.daemon
/Library/LaunchDaemons/com.leapfrog.connect.authdaemon.plist
- com.leapfrog.connect.authdaemon
/Library/LaunchDaemons/com.logmein.logmeinblanker.plist
- com.logmein.logmeinblanker
/Library/LaunchDaemons/com.logmein.logmeinserver.plist
- com.logmein.logmeinserver
/Library/LaunchDaemons/com.logmein.raupdate.plist
- com.logmein.raupdate
/Library/LaunchDaemons/com.microsoft.office.licensing.helper.plist
- com.microsoft.office.licensing.helper
/Library/LaunchDaemons/com.oracle.java.Helper-Tool.plist
- com.oracle.java.Helper-Tool
/Library/LaunchDaemons/com.oracle.java.JavaUpdateHelper.plist
- com.oracle.java.JavaUpdateHelper
/Library/LaunchDaemons/com.rogueamoeba.hermes.plist
- com.rogueamoeba.hermes
/Library/LaunchDaemons/org.macosforge.xquartz.privileged_startx.plist
- org.macosforge.xquartz.privileged_startx
Library/LaunchAgents/com.adobe.ARM.UUID.plist
- com.adobe.ARM.UUID
Library/LaunchAgents/com.apple.FolderActions.enabled.plist
- com.apple.FolderActions.enabled
Library/LaunchAgents/com.apple.FolderActions.folders.plist
- com.apple.FolderActions.folders
Library/LaunchAgents/com.backblaze.bzbmenu.plist
- com.backblaze.bzbmenu
Library/LaunchAgents/com.citrixonline.GoToMeeting.G2MUpdate.plist
- com.citrixonline.GoToMeeting.G2MUpdate
Library/LaunchAgents/com.google.Chrome.framework.plist
- com.google.Chrome.framework.service_process~/Library/Application_Support/Google /Chrome
Library/LaunchAgents/com.leapfrog.connect.monitor.plist
- com.leapfrog.connect.monitor
Library/LaunchAgents/jp.co.canon.Inkjet_Extended_Survey_Agent.plist
- jp.co.canon.Inkjet_Extended_Survey_Agent
Library/LaunchAgents/ws.agile.1PasswordAgent.plist
- ws.agile.1PasswordAgent
Startup items
/Library/StartupItems/ChmodBPF/ChmodBPF
/Library/StartupItems/ChmodBPF/StartupParameters.plist
Bundles
/System/Library/CoreServices/SecurityAgentPlugins/HomeDirMechanism.bundle
- com.apple.SecurityAgentPlugin.HomeDirMechanism
/System/Library/CoreServices/SecurityAgentPlugins/KerberosAgent.bundle
- com.apple.KerberosAgent
/System/Library/CoreServices/SecurityAgentPlugins/loginwindow.bundle
- com.apple.securityAgentPlugins.loginwindowUI
/System/Library/CoreServices/SecurityAgentPlugins/MCXMechanism.bundle
- com.apple.securityAgentPlugin.MCXMechanism
/System/Library/CoreServices/SecurityAgentPlugins/PKINITMechanism.bundle
- com.apple.PKINITMechanism
/System/Library/CoreServices/SecurityAgentPlugins/RestartAuthorization.bundle
- com.apple.securityAgentPlugin.RestartAuthorization
/System/Library/Extensions/AMDRadeonVADriver.bundle
- N/A
/System/Library/Extensions/AMDRadeonX3000.kext
- com.apple.AMDRadeonX3000
/System/Library/Extensions/AMDRadeonX3000GLDriver.bundle
- com.apple.AMDRadeonX3000GLDriver
/System/Library/Extensions/AMDRadeonX4000.kext
- com.apple.AMDRadeonX4000
/System/Library/Extensions/AMDRadeonX4000GLDriver.bundle
- com.apple.AMDRadeonX4000GLDriver
/System/Library/Extensions/AppleFSCompressionTypeLZVN.kext
- com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN
/System/Library/Extensions/AppleIntelHD3000Graphics.kext
- com.apple.driver.AppleIntelHD3000Graphics
/System/Library/Extensions/AppleIntelHD3000GraphicsGA.plugin
- com.apple.driver.AppleIntelHD3000GraphicsGA
/System/Library/Extensions/AppleIntelHD3000GraphicsGLDriver.bundle
- com.apple.driver.AppleIntelHD3000GraphicsGLDriver
/System/Library/Extensions/AppleIntelHD3000GraphicsVADriver.bundle
- com.apple.AppleIntelHD3000GraphicsVADriver
/System/Library/Extensions/AppleIntelHD4000Graphics.kext
- com.apple.driver.AppleIntelHD4000Graphics
/System/Library/Extensions/AppleIntelHD4000GraphicsGLDriver.bundle
- com.apple.driver.AppleIntelHD4000GraphicsGLDriver
/System/Library/Extensions/AppleIntelHD4000GraphicsVADriver.bundle
- com.apple.AppleIntelHD4000GraphicsVADriver
/System/Library/Extensions/AppleIntelHD5000Graphics.kext
- com.apple.driver.AppleIntelHD5000Graphics
/System/Library/Extensions/AppleIntelHD5000GraphicsGLDriver.bundle
- com.apple.driver.AppleIntelHD5000GraphicsGLDriver
/System/Library/Extensions/AppleIntelHD5000GraphicsVADriver.bundle
- com.apple.AppleIntelHD5000GraphicsVADriver
/System/Library/Extensions/AppleIntelHDGraphicsGLDriver.bundle
- com.apple.driver.AppleIntelHDGraphicsGLDriver
/System/Library/Extensions/AppleIntelHSWVA.bundle
- com.apple.AppleIntelHSWFBVA
/System/Library/Extensions/AppleIntelIVBVA.bundle
- com.apple.AppleIntelIVBFBVA
/System/Library/Extensions/ATIRadeonX2000.kext
- com.apple.ATIRadeonX2000
/System/Library/Extensions/ATIRadeonX2000GA.plugin
- com.apple.ATIRadeonX2000GA
/System/Library/Extensions/ATIRadeonX2000GLDriver.bundle
- com.apple.ATIRadeonX2000GLDriver
/System/Library/Extensions/ATIRadeonX2000VADriver.bundle
- com.apple.ATIRadeonX2000VADriver
/System/Library/Extensions/BlackberryUSB.kext
- net.pocketmac.driver.BlackberryUSB
/System/Library/Extensions/BlackberryUSBDev.kext
- net.pocketmac.driver.BlackberryUSBDev
/System/Library/Extensions/EPSONUSBPrintClass.kext
- com.epson.print.kext.USBPrintClass
/System/Library/Extensions/GeForce.kext
- com.apple.GeForce
/System/Library/Extensions/GeForceGA.plugin
- com.apple.GeForceGA
/System/Library/Extensions/GeForceGLDriver.bundle
- com.apple.GeForceGLDriver
/System/Library/Extensions/GeForceTesla.kext
- com.apple.GeForceTesla
/System/Library/Extensions/GeForceTeslaGLDriver.bundle
- com.apple.GeForceTeslaGLDriver
/System/Library/Extensions/GeForceTeslaVADriver.bundle
- com.apple.GeForceTeslaVADriver
/System/Library/Extensions/GeForceVADriver.bundle
- com.apple.GeForceVADriver
/System/Library/Extensions/HotSync Classic Seize.kext
- com.palm.ClassicNotSeizeDriver
/System/Library/Extensions/hp_designjet_series.kext
- com.hp.print.hpio.Designjet.kext
/System/Library/Extensions/hp_Deskjet_io_enabler.kext
- com.hp.print.hpio.Deskjet.kext
/System/Library/Extensions/hp_fax_io.kext
- com.hp.kext.hp-fax-io
/System/Library/Extensions/hp_Inkjet1_io_enabler.kext
- com.hp.print.hpio.Inkjet1.kext
/System/Library/Extensions/hp_Inkjet2_io_enabler.kext
- com.hp.print.hpio.Inkjet2.kext
/System/Library/Extensions/hp_Inkjet3_io_enabler.kext
- com.hp.print.hpio.Inkjet3.kext
/System/Library/Extensions/hp_Inkjet4_io_enabler.kext
- com.hp.print.hpio.Inkjet4.kext
/System/Library/Extensions/hp_Inkjet5_io_enabler.kext
- com.hp.print.hpio.Inkjet5.kext
/System/Library/Extensions/hp_Inkjet7_io_enabler.kext
- com.hp.print.hpio.inkjet7.kext
/System/Library/Extensions/hp_Inkjet8_io_enabler.kext
- com.hp.print.hpio.inkjet8.kext
/System/Library/Extensions/hp_Inkjet9_io_enabler.kext
- com.hp.print.hpio.Inkjet9.kext
/System/Library/Extensions/hp_Inkjet_io_enabler.kext
- com.hp.print.hpio.Inkjet.kext
/System/Library/Extensions/hp_io_printerclassdriver_enabler.kext
- com.hp.hpio.hp_io_printerclassdriver_enabler
/System/Library/Extensions/hp_Laserjet_io_enabler.kext
- com.hp.print.hpio.Laserjet.kext
/System/Library/Extensions/hp_Officejet_io_enabler.kext
- com.hp.print.hpio.Officejet.kext
/System/Library/Extensions/hp_Photosmart_io_enabler.kext
- com.hp.print.hpio.Photosmart.kext
/System/Library/Extensions/hp_PhotosmartPro_io_enabler.kext
- com.hp.print.hpio.PhotosmartPro.kext
/System/Library/Extensions/hp_psa640_io_enabler.kext
- com.hp.hpio.hp_psa640_io_enabler
/System/Library/Extensions/hp_qc_io_enabler.kext
- com.hp.hpio.hp_psa530_630_io_enabler
/System/Library/Extensions/LogMeInSoundDriver.kext
- com.logmein.driver.LogMeInSoundDriver
/System/Library/Extensions/RazerDeathAdderDriver.kext
- com.razer.driver.RazerDeathAdderDriver
/System/Library/Extensions/RemoteVirtualInterface.kext
- com.apple.nke.rvi
/System/Library/Extensions/Soundflower.kext
- com.Cycling74.driver.Soundflower
/System/Library/Extensions/SteerMouse.kext
- jp.plentycom.driver.SteerMouse
/System/Library/Extensions/UsbEthernetGadget.kext
- com.tomtom.driver.UsbEthernetGadget
/System/Library/Extensions/WD1394HPDriver.kext
- com.wdc.driver.1394HP
/System/Library/Extensions/WDUSBHPDriver.kext
- com.wdc.driver.USBHP
/Library/Address Book Plug-Ins/SkypeABDialer.bundle
- com.skype.skypeabdialer
/Library/Address Book Plug-Ins/SkypeABSMS.bundle
- com.skype.skypeabsms
/Library/Audio/MIDI Drivers/EmagicUSBMIDIDriver.plugin
- info.emagic.driver.unitor
/Library/Audio/Plug-Ins/Components/A52Codec.component
- com.shepmater.A52Codec
/Library/Audio/Plug-Ins/HAL/AirPlay.driver
- com.apple.audio.AirTunesHALPlugin
/Library/Audio/Plug-Ins/HAL/AppleAVBAudio.driver
- com.apple.audio.AppleAVBAudio
/Library/Audio/Plug-Ins/HAL/BluetoothAudioPlugIn.driver
- com.apple.audio.BluetoothAudioPlugIn
/Library/Audio/Plug-Ins/HAL/iSightAudio.driver
- com.apple.iSightAudio
/Library/Internet Plug-Ins/CitrixICAClientPlugIn.plugin
- com.citrix.citrixicaclientplugIn
/Library/Internet Plug-Ins/Default Browser.plugin
- com.apple.DefaultBrowser.PlugIn
/Library/Internet Plug-Ins/disabled/JavaAppletPlugin.plugin
- com.apple.java.JavaAppletPlugin
/Library/Internet Plug-Ins/Disabled Plug-Ins/Windows Media Plugin
- com.microsoft.WMP.defaultplugin
/Library/Internet Plug-Ins/Disabled Plug-Ins/Windows Media Plugin/Contents/Resources/English.lproj
- N/A
/Library/Internet Plug-Ins/DRM Plugin.bundle
- com.microsoft.DRMPlugin
/Library/Internet Plug-Ins/Flash Player.plugin
- N/A
/Library/Internet Plug-Ins/Flip4Mac WMV Plugin.plugin
- net.telestream.wmv.plugin
/Library/Internet Plug-Ins/GarminGpsControl.plugin
- com.garmin.GarminGpsControl
/Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin
- com.Google.GoogleEarthPlugin.plugin
/Library/Internet Plug-Ins/GoogleGadget.webplugin
- com.google.googlegadgetwebplugin
/Library/Internet Plug-Ins/googletalkbrowserplugin.plugin
- com.google.googletalkbrowserplugin
/Library/Internet Plug-Ins/iPhotoPhotocast.plugin
- com.apple.plugin.iPhotoPhotocast
/Library/Internet Plug-Ins/JavaAppletPlugin.plugin
- com.oracle.java.JavaAppletPlugin
/Library/Internet Plug-Ins/mb.plugin
- com.motionbased.plugin
/Library/Internet Plug-Ins/net.juniper.DSSafariExtensions.plugin
- net.juniper.DSSafariExtensions.plugin
/Library/Internet Plug-Ins/o1dbrowserplugin.plugin
- com.google.o1dbrowserplugin
/Library/Internet Plug-Ins/OfficeLiveBrowserPlugin.plugin
- com.microsoft.officelive.browserplugin
/Library/Internet Plug-Ins/Quartz Composer.webplugin
- com.apple.QuartzComposer.webplugin
/Library/Internet Plug-Ins/QuickTime Plugin.plugin
- N/A
/Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
- com.microsoft.sharepoint.browserplugin
/Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
- com.microsoft.sharepoint.webkitplugin
/Library/Internet Plug-Ins/Silverlight.plugin
- com.microsoft.SilverlightPlugin
/Library/Internet Plug-Ins (Disabled)/Flash Player.plugin
- N/A
/Library/iTunes/iTunes Plug-ins/Fountain Music.bundle
- com.binaryminded.FountainMusic
/Library/iTunes/iTunes Plug-ins/Manifesto.bundle
- com.insightvr.manifesto
/Library/iTunes/iTunes Plug-ins/Quartz Composer Visualizer.bundle
- com.apple.QuartzComposer.iTunesPlugIn
/Library/PreferencePanes/Application Enhancer.prefPane
- com.unsanity.ape.prefpane
/Library/PreferencePanes/BackblazeBackup.prefPane
- com.backblaze.BackblazeBackup
/Library/PreferencePanes/Enterprise Vault.prefPane
- com.symantec.Enterprise_Vault
/Library/PreferencePanes/Flash Player.prefPane
- com.adobe.flashplayerpreferences
/Library/PreferencePanes/Flip4Mac WMV.prefPane
- net.telestream.wmv.prefpane
/Library/PreferencePanes/Growl.prefPane
- com.growl.prefpanel
/Library/PreferencePanes/HyperDock.prefpane
- de.bahoom.HyperDock.prefpane
/Library/PreferencePanes/JavaControlPanel.prefPane
- com.oracle.java.JavaControlPanel
/Library/PreferencePanes/MacFUSE.prefPane
- com.google.MacFUSE
/Library/PreferencePanes/Perian.prefPane
- org.perian.PerianPane
/Library/PreferencePanes/SteerMouse.prefPane
- jp.plentycom.prefpane.SteerMouse
/Library/QuickTime/AC3MovieImport.component
- com.cod3r.ac3movieimport
/Library/QuickTime/AppleMPEG2Codec.component
- com.apple.AppleMPEG2Codec
/Library/QuickTime/Perian.component
- org.perian.Perian
/Library/Spotlight/iBooksAuthor.mdimporter
- com.apple.MDImporter.iBooksAuthor
/Library/Spotlight/iWork.mdimporter
- com.apple.MDImporter.iWork
/Library/Spotlight/Microsoft Office.mdimporter
- com.microsoft.MDImporter.Office
/Library/Widgets/CI Filter Browser.wdgt
- com.apple.CIFilterBrowser
/Library/Widgets/Network Connect.wdgt
- net.juniper.widget.NetworkConnect
Library/Address Book Plug-Ins/SkypeABDialer.bundle
- com.skype.skypeabdialer
Library/Address Book Plug-Ins/SkypeABSMS.bundle
- com.skype.skypeabsms
Library/Caches/com.apple.Safari/Extensions/1Password.safariextension
- com.agilebits.onepassword4-safari
Library/Caches/com.apple.Safari/Extensions/OpenIE.safariextension
- com.parallels.openinie
Library/Internet Plug-Ins/ATTConnectEventEntry.plugin
- N/A
Library/Internet Plug-Ins/ATTConnectWCPlugin1_0_6.plugin
- com.att.attconnectwcplugin
Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin
- com.citrixonline.mac.WebDeploymentPlugin
Library/Internet Plug-Ins/EvernoteSafariClipperPlugin.webplugin
- com.evernote.EvernoteSafariClipperPlugin
Library/Internet Plug-Ins/OctoshapeWeb.plugin
- com.octoshape.browserplugin
Library/Internet Plug-Ins/Picasa.plugin
- com.google.PicasaPlugin
Library/Internet Plug-Ins/WebEx.plugin
- com.webex.WebEx
Library/Internet Plug-Ins/WebEx.plugin/Contents/Resources
- com.webex.WebEx
Library/Internet Plug-Ins/WebEx64.plugin
- com.cisco_webex.plugin.gpc64
Library/iTunes/iTunes Plug-ins/TuneUp/TuneUp Visualizer.bundle
- N/A
Library/PreferencePanes/MusicManager.prefPane
- com.google.musicmanager.pref
Library/Services/SearchGoogle.service
- st.gu.SearchGoogle
Library/Widgets/Airport Radar.wdgt
- com.MacWireless.widget.AirportRadar
Library/Widgets/AirTrafficControl.wdgt
- com.spintriplet.atc.widget
Library/Widgets/BART.wdgt
- com.worrydream.bartwidget
Library/Widgets/dashkards.wdgt
- com.thomasborowski.dashkards
Library/Widgets/Delicious Library.wdgt
- com.delicious-monster.widget.library2
Library/Widgets/Gas.wdgt
- com.andrethegiant.widget.gas
Library/Widgets/Gmail.wdgt
- com.google.widget.Gmail
Library/Widgets/Google Maps.wdgt
- org.unobtrusive.widget.GoogleMaps
Library/Widgets/Google News.wdgt
- N/A
Library/Widgets/GoogleCalendar.wdgt
- com.google.widget.GoogleCalendar
Library/Widgets/GoogleCalendar2.wdgt
- com.google.widget.GoogleCalendar2
Library/Widgets/iStat Pro.wdgt
- com.iSlayer.iStatpro4.widget
Library/Widgets/JiWire.wdgt
- com.jiwire.widget
Library/Widgets/MightyMonitor 2.wdgt
- com.johnstarmer.widget.MightyTry a restart.
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - Mavericks
Safe Mode - About
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy -
Fex 1 Nexus 2148 to 2 Nexus 5010 problem?
hi all
I'm having trouble when fex(ing) 1 nexus 2000 to 2 nexus 5000.
I've configured as dual home from 1 nexus 2k. But after success config, just 1 nexus 5k can see 48 port on it. other cannot see it and it showed as module offline
Here's is results:
N5K-01(config-if)# sh int e1/4 fex-intf
Fabric FEX
Interface Interfaces
Eth1/4
N5K-01(config-if)#
N5K-02# sh int e1/4 fex-intf
Fabric FEX
Interface Interfaces
Eth1/4 Eth100/1/48 Eth100/1/47 Eth100/1/46 Eth100/1/45
Eth100/1/44 Eth100/1/43 Eth100/1/42 Eth100/1/41
Eth100/1/40 Eth100/1/39 Eth100/1/38 Eth100/1/37
Eth100/1/36 Eth100/1/35 Eth100/1/34 Eth100/1/33
Eth100/1/32 Eth100/1/31 Eth100/1/30 Eth100/1/29
Eth100/1/28 Eth100/1/27 Eth100/1/26 Eth100/1/25
Eth100/1/24 Eth100/1/23 Eth100/1/22 Eth100/1/21
Eth100/1/20 Eth100/1/19 Eth100/1/18 Eth100/1/17
Eth100/1/16 Eth100/1/15 Eth100/1/14 Eth100/1/13
Eth100/1/12 Eth100/1/11 Eth100/1/10 Eth100/1/9
Eth100/1/8 Eth100/1/7 Eth100/1/6 Eth100/1/5
Eth100/1/4 Eth100/1/3 Eth100/1/2 Eth100/1/1
===============================
N5K-01(config-if)# sh fex 100 detail
FEX: 100 Description: FEX0100 state: Offline
FEX version: 4.1(3)N2(1a) [Switch version: 4.1(3)N2(1a)]
FEX Interim version: 4.1(3)N2(1a)
Switch Interim version: 4.1(3)N2(1a)
Extender Model: N2K-C2148T-1GE, Extender Serial: JAF1405CKHC
Part No: 73-12009-06
Card Id: 70, Mac Addr: 00:0d:ec:fd:48:82, Num Macs: 64
Module Sw Gen: 12594 [Switch Sw Gen: 21]
pinning-mode: static Max-links: 1
Fabric port for control traffic: Eth1/4
Fabric interface state:
Eth1/4 - Interface Up. State: Active
Fex Port State Fabric Port Primary Fabric
Eth100/1/1 Down Eth1/4 Eth1/4
Eth100/1/2 Down Eth1/4 Eth1/4
Eth100/1/3 Down Eth1/4 Eth1/4
Eth100/1/4 Down Eth1/4 Eth1/4
Eth100/1/5 Down Eth1/4 Eth1/4
Eth100/1/6 Down Eth1/4 Eth1/4
Eth100/1/7 Down Eth1/4 Eth1/4
Eth100/1/8 Down Eth1/4 Eth1/4
Eth100/1/9 Down Eth1/4 Eth1/4
Eth100/1/10 Down Eth1/4 Eth1/4
Eth100/1/11 Down Eth1/4 Eth1/4
Eth100/1/12 Down Eth1/4 Eth1/4
Eth100/1/13 Down Eth1/4 Eth1/4
Eth100/1/14 Down Eth1/4 Eth1/4
Eth100/1/15 Down Eth1/4 Eth1/4
Eth100/1/16 Down Eth1/4 Eth1/4
Eth100/1/17 Down Eth1/4 Eth1/4
Eth100/1/18 Down Eth1/4 Eth1/4
Eth100/1/19 Down Eth1/4 Eth1/4
Eth100/1/20 Down Eth1/4 Eth1/4
Eth100/1/21 Down Eth1/4 Eth1/4
Eth100/1/22 Down Eth1/4 Eth1/4
Eth100/1/23 Down Eth1/4 Eth1/4
Eth100/1/24 Down Eth1/4 Eth1/4
Eth100/1/25 Down Eth1/4 Eth1/4
Eth100/1/26 Down Eth1/4 Eth1/4
Eth100/1/27 Down Eth1/4 Eth1/4
Eth100/1/28 Down Eth1/4 Eth1/4
Eth100/1/29 Down Eth1/4 Eth1/4
Eth100/1/30 Down Eth1/4 Eth1/4
Eth100/1/31 Down Eth1/4 Eth1/4
Eth100/1/32 Down Eth1/4 Eth1/4
Eth100/1/33 Down Eth1/4 Eth1/4
Eth100/1/34 Down Eth1/4 Eth1/4
Eth100/1/35 Down Eth1/4 Eth1/4
Eth100/1/36 Down Eth1/4 Eth1/4
Eth100/1/37 Down Eth1/4 Eth1/4
Eth100/1/38 Down Eth1/4 Eth1/4
Eth100/1/39 Down Eth1/4 Eth1/4
Eth100/1/40 Down Eth1/4 Eth1/4
Eth100/1/41 Down Eth1/4 Eth1/4
Eth100/1/42 Down Eth1/4 Eth1/4
Eth100/1/43 Down Eth1/4 Eth1/4
Eth100/1/44 Down Eth1/4 Eth1/4
Eth100/1/45 Down Eth1/4 Eth1/4
Eth100/1/46 Down Eth1/4 Eth1/4
Eth100/1/47 Down Eth1/4 Eth1/4
Eth100/1/48 Down Eth1/4 Eth1/4
Logs:
[11/24/2010 03:16:20.624283] Module register received
[11/24/2010 03:16:20.627639] Registration response sent
[11/24/2010 03:16:21.115021] Module Online Sequence
[11/24/2010 03:16:22.379395] Module Online
[11/24/2010 03:52:09.779773] Module disconnected
[11/24/2010 03:52:09.781691] Offlining Module
[11/24/2010 03:52:09.782231] Module Offline Sequence
[11/24/2010 03:52:11.735462] Module Offline
[11/24/2010 04:06:25.258659] Module disconnected
[11/24/2010 04:06:25.259890] Offlining Module
=================
N5K-02# sh fex 100 detail
FEX: 100 Description: FEX0100 state: Online
FEX version: 4.1(3)N2(1a) [Switch version: 4.1(3)N2(1a)]
FEX Interim version: 4.1(3)N2(1a)
Switch Interim version: 4.1(3)N2(1a)
Extender Model: N2K-C2148T-1GE, Extender Serial: JAF1405CKHC
Part No: 73-12009-06
Card Id: 70, Mac Addr: 00:0d:ec:fd:48:82, Num Macs: 64
Module Sw Gen: 12594 [Switch Sw Gen: 21]
pinning-mode: static Max-links: 1
Fabric port for control traffic: Eth1/4
Fabric interface state:
Eth1/4 - Interface Up. State: Active
Fex Port State Fabric Port Primary Fabric
Eth100/1/1 Down Eth1/4 Eth1/4
Eth100/1/2 Down Eth1/4 Eth1/4
Eth100/1/3 Down Eth1/4 Eth1/4
Eth100/1/4 Down Eth1/4 Eth1/4
Eth100/1/5 Down Eth1/4 Eth1/4
Eth100/1/6 Down Eth1/4 Eth1/4
Eth100/1/7 Down Eth1/4 Eth1/4
Eth100/1/8 Down Eth1/4 Eth1/4
Eth100/1/9 Down Eth1/4 Eth1/4
Eth100/1/10 Down Eth1/4 Eth1/4
Eth100/1/11 Down Eth1/4 Eth1/4
Eth100/1/12 Down Eth1/4 Eth1/4
Eth100/1/13 Down Eth1/4 Eth1/4
Eth100/1/14 Down Eth1/4 Eth1/4
Eth100/1/15 Down Eth1/4 Eth1/4
Eth100/1/16 Down Eth1/4 Eth1/4
Eth100/1/17 Down Eth1/4 Eth1/4
Eth100/1/18 Down Eth1/4 Eth1/4
Eth100/1/19 Down Eth1/4 Eth1/4
Eth100/1/20 Down Eth1/4 Eth1/4
Eth100/1/21 Down Eth1/4 Eth1/4
Eth100/1/22 Down Eth1/4 Eth1/4
Eth100/1/23 Down Eth1/4 Eth1/4
Eth100/1/24 Down Eth1/4 Eth1/4
Eth100/1/25 Down Eth1/4 Eth1/4
Eth100/1/26 Down Eth1/4 Eth1/4
Eth100/1/27 Down Eth1/4 Eth1/4
Eth100/1/28 Down Eth1/4 Eth1/4
Eth100/1/29 Down Eth1/4 Eth1/4
Eth100/1/30 Down Eth1/4 Eth1/4
Eth100/1/31 Down Eth1/4 Eth1/4
Eth100/1/32 Down Eth1/4 Eth1/4
Eth100/1/33 Down Eth1/4 Eth1/4
Eth100/1/34 Down Eth1/4 Eth1/4
Eth100/1/35 Down Eth1/4 Eth1/4
Eth100/1/36 Down Eth1/4 Eth1/4
Eth100/1/37 Down Eth1/4 Eth1/4
Eth100/1/38 Down Eth1/4 Eth1/4
Eth100/1/39 Down Eth1/4 Eth1/4
Eth100/1/40 Down Eth1/4 Eth1/4
Eth100/1/41 Down Eth1/4 Eth1/4
Eth100/1/42 Down Eth1/4 Eth1/4
Eth100/1/43 Down Eth1/4 Eth1/4
Eth100/1/44 Down Eth1/4 Eth1/4
Eth100/1/45 Down Eth1/4 Eth1/4
Eth100/1/46 Down Eth1/4 Eth1/4
Eth100/1/47 Down Eth1/4 Eth1/4
Eth100/1/48 Down Eth1/4 Eth1/4
Logs:
[11/24/2010 03:49:38.824900] Module timed out
[11/24/2010 03:54:08.225000] Module register received
[11/24/2010 03:54:08.226093] Registration response sent
[11/24/2010 03:54:08.540805] Module Online Sequence
[11/24/2010 03:54:10.7287] Module Online
Anyone can help me with this?
Thanks.I already configured vPC between 2 Nexus 5010
N5K-01# sh vpc brief
Legend:
(*) - local vPC is down, forwarding via vPC peer-link
vPC domain id : 1
Peer status : peer adjacency formed ok
vPC keep-alive status : peer is alive
Configuration consistency status: success
vPC role : primary
vPC Peer-link status
id Port Status Active vlans
1 Po1 up 1
vPC status
id Port Status Consistency Reason Active vlans
100 Po100 down success success -
N5K-02# sh vpc
Legend:
(*) - local vPC is down, forwarding via vPC peer-link
vPC domain id : 1
Peer status : peer adjacency formed ok
vPC keep-alive status : peer is alive
Configuration consistency status: success
vPC role : secondary
vPC Peer-link status
id Port Status Active vlans
1 Po1 up 1
vPC status
id Port Status Consistency Reason Active vlans
100 Po100 down* success success -
N5K-02#
may i miss some config ? -
Is it ok to use 1GB + 256MB RAM in Satellite P25-s607
I have a Satellite P25-s607, and I wanted to know the following:
1) if it's ok to install only a single 1GB stick of RAM next to a 256MB stick? Will I lose any performance speed doing this versus 2 1GB sticks (assuming I use under 1GB of RAM at most times)? Sounds like it will not have a performance hit since this model doesn't support dual-channel memory (according to crucial.com)
2) I assume this is the correct (best) module to use: [1GB, 200-pin SODIMM, DDR PC2700|http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=3B53A794A5CA7304] with specs:
# Module Size: 1GB
# Package: 200-pin SODIMM
# Feature: DDR PC2700
# Specs: DDR PC2700 CL=2.5 Unbuffered NON-ECC DDR333 2.5V 128Meg x 64
3) Is there any reason to install BIOS 2.10? It is listed under the toshiba support site under P25-S607-related, but the only change it states is: "Added support for the Pentium 4 D1 stepping CPU"
4) Is it possible to install a better CPU? I assume not...
5) What about graphics card (it came with NVIDIA® GeForce? FX Go5200 graphics controller; 64MB DDR external video memory)? Also I assume not...
Thanks for any help!!Hi
Regarding the question number:
1) The notebook can be upgraded up to 2GB RAM and therefore you can use one 1GB RAM and one 256MB module. But its always better if you would use the identical memory modules. Its better for performance but I doubt you will notice an performance boost.
2) Yes, you have to use the 200-pin SODIMM, DDR PC2700 modules
3) If your notebook runs trouble free then I dont see any reasons for a BIOS update
4) Usually its not advisable to upgrade the CPU due to a higher heat dissipation and overheating risks due to a higher CPU performance
5) No, this is definitely not possible because the GPU is fixed on the board
Greets -
Skype using 1GB ram and Error Message
I get the below error message on verion 7.30 of skype:
'Not enough storage to process this command'
PC Spec below:
Intel Core i7-4790K 4.00GHz (Devil's Canyon) Socket LGA1150
Processor
Asus Z97-A Intel Z97 (Socket 1150) DDR3 ATX Motherboard
Kingston HyperX 16GB (2x8GB) PC3-17100C11 2133MHz Dual
Channel Kit
SuperFlower Leadex GOLD 650W Fully Modular "80 Plus Gold"
Power Supply
Samsung 256GB SSD 850 PRO SATA 6Gbps 3D NAND Solid State
Drive
Western Digital Caviar Black 2TB SATA 6Gb/s 64MB Cache - OEM
Corsair Hydro H80i High Performance Liquid CPU Cooler
Asus GeForce GTX 980 "Reference Design" 4096MB GDDR5
PCI-Express Graphics Card
Windows 8.1
Anyone any ideas on the error message?
Once it's poped, you can't get rid of it, it gives you an 'Ok' option, but if you press it, it just loads again, and you can't press the 'x' or it just comes back.
In order to get Skype working again I have to 'End Process' in task manager (Where I see it using 1GB Ram), and then re-start skype and it's fine.Please, run the DirectX diagnostics tool.
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here. -
LMS 3.2 : Can't collect inventory from Nexus 5010
Hello,
I've added a Nexus 5010 to LMS, and it recognized it as such, and it was also able to archive its configuration.
But LMS is unable to collect inventory from it : the error message is "Device Sensed, but collection failed".
I am able to do an snmp walk of the device and I do see the ENTITY mib.
I am running LMS 3.2 with no RME patches or device package updates.
I've attached the relevant portion of IC_Server.log.
The Nexus 5010 is running NX-OS 4.1(3)N2(1a).
Thanks for the help,
Alex.>> I am running LMS 3.2 with no RME patches or device package updates.
So why not update the dev pkgs, then try again?
The latest RME pkg for Nexus is apparently v2.4, whereas I'm collecting the 5010s fine with v2.3.
704.
1.3.6.1.4.1.9.12.3.1.3.798
Cisco Nexus 5010 Switch
Nexus
2.3 -
We are deploying a new set of VMware server farms and would like to use the Nexus line for these 40 servers. Does is make sense to connect these via layer 2 to our VSS on a WS-X6708-10G-3C? Or should we wait a few years until we have a budget for a pair of Nexus 7k's and run everything to the VSS? thanks
hi Jim,
Nexus 5000 is a L2 switch, so pretty much whatever you do, its going to be a L2 Portchannel 'northbound' from N5K up to the C6K VSS pair.
Your VSS pair would be the L2/L3 boundary, so you'd have a SVI configured on it that is the L3 default gateway (from your servers).
Best practice would be that you distribute the portchannel members across the pair of physical switches in the VSS pair.
I'm involved in the development of the Nexus range within Cisco, so I'd be all for recommending you deploy Nexus 7000 too. :) But the reality is that you can probably achieve what you want today with C6K VSS, and in future if you did deploy Nexus 7000 too, you could make use of virtual Port Channel (vPC) to allow for full bisectional bandwidth from 'access' to 'agg/core' without any blocked links in STP.
vPC is available today on N7K and provides roughly similar L2 multichassis etherchannel as what VSS enables today in C6K VSS.
hope that helps.
cheers,
lincoln. -
Why is FCPX only using 1GB of the 16GB of memory I have available?
Why is FCPX only using 1GB of the 16GB I have available?
Any ideas?Hi
latest version Yosemite
latest version FCPX
300gb of 500gb used
just replaced optical drive with Samsung 840 EVO 500GB SSD which I'm now using as the main drive (also containing media).
Media varies. 720p or 1080p.
Its been awful for a while now.
Maybe you are looking for
-
Can Microsoft Access run on MAC
Hi, I'm making the switch from PC to MAC, but I need to know if Microsoft access can run on a MAC platform? Any help?
-
Hi, Im new to JSF and Facelets, I faced some problems in fragement tag when i was desigining my page, here is the code, <s:fragment rendered="#{show eq 'true'}"> <ui:param name="currency" value="true"/> </s:fragment> <s:fragment rendered="#{show eq '
-
Undefined imports in inline_as3
Hey, Strange issue. I was porting a C++ game library to FlasCC, more or less a success so far. I had to use some inline_as3 inside that lib like for playing videos (he was doing it with C++ OGV decocding, I'm instead calling AS3 to play FLV for speed
-
*Adobe CS4 Distiller and Flash CS4 errors*
Hello....beforehand I want to thank you for your help regarding the problems I can't seem to fix. I am using Windows Vista and I have run scandisk/disk defrag/computer cleanup with various programs so all of that is taken care of for a possible "solu
-
Overseas Do's and Dont's Questions
I will bring a iPhone to Mexico. I want to make sure I do not accidentally get charged anything. Assuming I do NOT get international data or roaming, how do I configure the phone so it ONLY does wifi. I ASSume that I would not be charged by ATT (also