Nexus 5020, after shutting down a nexus interface the Catalyst interface stays on(GLC-T)

Hi All, we have a weird case here:
Nexus5020:
   NXOS:5.1(3)N1(1a),
   Eth1/1 with SFP-1000BASE-T (GLC-T)
Catalyst 2960G
   int Gi0/1
both equipment connected with a crossover cable to those mentioned interfaces, after doing a shut on the nexus side (eth1/1), the catalyst stills shows the port up!!! could it be considered a normal behaivor? we would like that when shutting an interface on the nexus side the catlayst side see it down/down as happens between catalysts.
thanks a lot

I have seen some cases where the port stays up, this was due to a bad cable. If you do a 'show int E1/1 and show int gi0/1 on the switches, do both show 1gb "full"?
Could you try replacing the cable, and also I don't believe you would need a cross-over. You should be able to use a straight-thru.

Similar Messages

How do I get Thunderbird to connect to a properly-configured Office 365 mail account after shutting down and then restarting the client?

I get my Office 365 account set up and working in Thunderbird. I can download and send mail just fine using the auto-detect or manual account settings recommended by Microsoft/Outlook/Office 365. Everything appears to be working as it should as long as the client stays open. When I shut the Thunderbird client down and restart it, it can no longer access the Office 365 mail account. I get a popup error message:
The current operation on 'Inbox' did not succeed. The mail server for account (my Office 365 account) responded: User is authenticated but not connected.
It has no problem connecting to Hotmail, Gmail and other email services, and I can access Office 365 through the web client, but Thunderbird refuses to connect. If I remove the account and re-add it, I can have full access to my email again, but only as long as Thunderbird stays open. If the client gets restarted, it's gone again.
How do I fix this?

I think you might be having a cached password problem. I was having it and was able to resolve by deleting my stored password in Thunderbird. I referenced
http://kb.mozillazine.org/Setting_and_changing_email_passwords
and also posted my question and resolution:
https://support.mozilla.org/en-US/questions/1015221#answer-615054

Fan going crazy after shut down

It happened twice in the past two weeks. After shut down, a fan (in the back I believe) spin very very fast, as loud as a vacuum cleaner. The only way to stop it was to unplug my mac pro. It was so strange. I have had issues with fan noise, and the finder crashing. Anyone with an idea: I'm thinking of bringing the mac to the shop.

No I do not think so, I have the standard configuration: 2x2.8 Ghz with an ATI Radeon 2600.
Extra are 2x1GB memory from OWC, and 2 SATA Drives.
I've tried to reset the SMC many times, without noticing much of a difference: I've been monitoring the temperature at the power supply location and the memory bays: PS is around 110, memory around 105-120, depending on the Bay. I am running smcFan Control. I"m running the fans 1/4 faster than the MacPro default (according to smcFan Control preferences.)
Mea culpa, there's no AC in the room where I work, the Ambient temp has been 70-85.
Am I overtly concerned? I don't really have the time to bring the Mac to the shop.

Mac mini restarts on its own after shut-down.

The Mac mini will restart by itself about 10 minutes after shut down. I turned off all the restart options in energy saver. Funning 10.4.8 with the latest firmware instalation.
Any suggestions how to stop this?

I have had this problem for a looooong time and I think I finally resolved it. Last weekend I was trying a demo of MacPilot 3 and found Elgato's EyeTV had two items in the Power > Events list. Apparently when you set EyeTV to start up the computer for it's schedule it restarts the computer randomly rather in a reasonable amount of time before the recording begins. Since there were two files, I think 1 was left over from previous EyeTV version and was starting up the computer even though I told EyeTV not to start the computer at a later date. Deleting both files seems to be the solution.

Is it possible to continue downloading OS X Lion after shutting down the computer?

I am downloading the OS X Lion app on my MacBook Pro and is only at 180mb after an hour. I am downloading this app for free because I recently purchased a MacBook Pro. Is there a way I can continue the download even after shutting down the computer? Will I be charged the next time I try to re-download the app--as in, will the code for downloading the app for free expire?
Thank you SO much!

I downloaded OS X Lion over the period of a day or so and what you have to do is pause the download (for a snow leopard user that should be in your dock) and then shut down your machine. When you boot it back up, you should be able to resume the download by clicking the OS X Lion logo and typing in your Apple ID info and the download should resume at the same spot where it was when you left it.

Losing Desktop Items/Documents after shutting down and restarting

Twice, over the last couple of months after shutting down and restarting my macbook, everything on my desktop gets deleted, and it seems all the settings go back to their original form?
Anyone have this problem?
Message was edited by: jram1111

Hi, I had this problem and it was due to setting file vault in the security settings. I removed having that set and then I had to go into system settings, Account and under Login Items, add back items such as mail and things that required passwords that were not coming up on my dock after each time I shut down.
I hope this is helpful! Better late than never - if you have fixed yours, maybe this will help someone else.

In 2 node RAC. After shutting down database not able to connect.

I have 2 node Oracle 10g RAC (RAC-1 and RAC-2) on Windows 2003 Server.
After shutting down instance on RAC-2
I am not able to connect to database from any node.
I did this on RAC-2 :
SQL>shutdown immediate;
Database went down smoothly.
SQL>conn sys/oracle@rac as sysdba
ERROR:
ORA-12514: TNS:listener does not currnetly know of services requested in connect descriptor.
My first node is running fine but I am not able to connect to database from first node or from client.
Any suggestion???
Regards:
Sushil

One question I want to ask, what should be the Listener Services startup mode in RAC? MANUAL or AUTOMATIC???Ideally, if you are instances and other oracle resources are set to autostart then there is no reason for you to set the listener to MANUAL. You may like to change it to AUTOMATIC so that on reboot it comes up without manual intervention.

Simple floating clock does not appear after shut down

Hi,
On my iMac oxs 10.9.4. my simple floating clock does not appear after shut down.
Can anybody tell me how to overcome this?
Cheers

And now I am at the stage it wont automatically start despite it being ticked in the Log In Items.
As Imp68 has asked, do you mean the "Hide" Checkbox is selected?
If you have checked the box, that says, to start the application, however, hide it so it is not visible when you start.
If you run Applications -> Utilities -> Activity Monitor, can you find Simple Floating Clock as a running app? (Activity Monitor has a Search box to make this easier).
Is Simple Floating Clock on your Menu bar?
Is Simple Floating Clock set to float?

IE had unknown error and after shut down laptop screen is blank

HP Pavillion dv6t Select Edition Customizable Notebook PC # A2Z58AV
Windows 7
IE popped up with a message that there was an error. No other explanation. After shutting down and rebooting, the laptop screen is black but has power.
No changes made to operating system before this occured.

Hi @devitojj
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that when you power off your notebook it automatically restarts in 4 seconds.
You have tried several steps to try and resolve this but there is no change.
As it repeated the behavior with the hard drive removed, you know it is not an issue with Windows.
You have tried updating the bios and returning it to bios defaults but no change.
Here is a link from answers.microsoft.com that helped other people with this issue.
Windows 7 computer restarts automatically after shutdown
This does suggest you edit your registry which does have the potential to cause issues, so be very careful. I would also suggest backing up your registry before you attempt it, just in case.
Back up the registry from Windows.microsoft.com
If that has not helped, I would try removing the Cmos or RTC battery for 30 seconds and then replacing it.
Please let me know if this helped.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

How do I log in after a shut down when I forgot the password

How do I log in after a shut down when I forgot the password

Forgot Mac Password? How to Reset Your Mac Password (with or without CD)
Change the Admin Password with Mac OS X Single User Mode

My iMac screen keeps showing pixels of previously opened documents and Safari tabs and hour or two after closing them. The shadow of those opened documents are still there hours later after shutting down and restarting my computer. What is happening

My iMac screen keeps showing pixels of previously opened documents and Safari tabs and hour or two after closing them.
Even when I swipe to the dashboard the outlines are still there when I know they should not be.
The shadow of those opened documents are still there hours later after shutting down and restarting my computer.
What is happening and what shall I do? Thanks in advance.

Not much to go on in your product info, but maybe this will help: iMac (27-inch): AMD Radeon 6970M Video Card Replacement Program. If not, then it's time to visit an Apple repair station.
27" i7 iMac (Mid 2011) refurb, OS X Mavericks (10.9.4), ML & SL, G4 450 MP w/Leopard, 9.2.2

Photoshop won't open after shut down and restart. Any ideas?

Photoshop won't open after shut down and restart? Any ideas?
Hazelydogs

Apple does not support 3rd party software. Again, post in Adobe's forums. Plenty of Mac users there who uses their products.

I tried to reset my iphone5, the reset loading was okay, but after that there is other loading(the one that come everytime after shutting down), so its about 6-7 hours that my phone is stuck on this page. force shutdown didnt work.

I tried to reset my iphone5, the reset loading was okay, but after that there is other loading(the one that come everytime after shutting down), so its about 6-7 hours that my phone is stuck on this page. force shutdown didnt work.

There are many ways to do a reset on an iPhone so which one have you been trying that has got you to where you are now?

Satellite E45t won't start for few hours after shut down

I have a brand new Satellite E45t-4100. After shutting down, I am not able to start the laptop for few hours. Upon pressing the power button, say after 15 minutes, power button LED lights up but nothing is displayed on the screen. I have disabled the sleep mode from power settings as I was facing the similar situation when trying to wake up the laptop from sleep. Although, when restart is chosen, laptop restarts without any trouble.
Please help.

Hello,
I have the exact same problem as the OP with an E45t-a4300. Purchased almost a year ago (Oct 30, 2013) from Best Buy. Worked perfectly for about 2 months after purchase and then this problem arose. Started when I'd put the computer to sleep, it wouldn't wake up. The computer would just shut off when I'd go to wake it up. When I'd hit the power button to restart, the fan would briefly spin, power indicator/wifi light turns on, then it shuts down again. I would repeat this cycle- sometimes only a few times, sometimes for almost an hour- before the Toshiba splash screen appeared with the "computer wasn't shut down properly" and the computer would restart and run the standard diagonostics. However, at first on a cold start or start from hibernation it would start fine but after awhile that stopped, too, and any starting attempt was met by the same non-start/shut down cycle.
This went on for about 3 months with me basically rarely shutting down the machine. I searched forums at the time and found nothing regarding this problem. Then one day in mid-March, the start-up problem miraculously disappeard- it fired right up. It started perfectly fine and worked with no problems whatsoever for 6 months, including waking from sleep and hibernation, until about 2 weeks ago. Now the same problem is back- it won't turn on with multiple start attempts and shuts down when you try to wake from sleep or hibernation- showing the "computer wasn't shut down properly" on the splash screen and going through the test process when if finally does start. Also, I'm now unable to enter the BIOS page on start up when pressing F2. I also have disabled rapid start, etc after the problem began.
I've owned quite a few laptops over the years (including Toshiba) and work with computer based systems for a living. I REALLY love this laptop a lot (yes, even with 8.1) but this problem is just disheartening. I truly appreciate any help.
Thanks!!

Satellite Pro P300-05X restarts after shut down

Hi All,
I've owned my notebook (Satellite P300/05X, Processor P8600 (2.4GHz), 17" Display) now for 1 week and I have been very frustrated with this problem I'm about to explain.
After selecting "Shut Down" option (not "sleep", not "hibernate" etc, but definitely "shut down"), the notebook goes through the steps of shutting down, and then all the lights on the touch finger pads turn off, and then the light from the main switch turns off. And then for no apparent reason, the notebook starts up again like as if I've pressed the switch back on! This morning was the worst, I went through the steps of shutting down 3 times! before it actually switched off...very frustrating especially if you're in a hurry.
Also, I have noticed occasionally the main switch light does not go off at all, all other lights do however, but not the main switch...and then all of a sudden, the machine springs back to life!
Now this problem is very random and does not happen all the time. On average it will automatically restart on, say 1 out of 7 times (except this morning!!!).
As I've said, this machine is very new. It has Vista Business, and I have installed only a handful of programs (Eclipse/Java, MySQL...that's pretty much it). And I'm very sure it's not a virus, nor malware. Plus I have not changed any BIOS settings.
But I have turned off all power options in the Control Panel (that is, "never" turn off hard disk etc etc).
Any ideas??
Thanks a lot guys....

Have you connected external devices to the notebook like printer, external HDD and so far?
Disconnect them because this could maybe cause the issue.
Make sure that you have wake up on LAN in BIOS and Windows disabled and you should also disconnect the LAN cable and other cables.
Check this and try also to update the BIOS.

Nexus 5020, after shutting down a nexus interface the Catalyst interface stays on(GLC-T)

Similar Messages

Maybe you are looking for