Nexus 7010 bgp state change alert not triggered to NNM
Hi ,
BGP state change alert not triggered to NNM on Nexus -7010 for Monitoring.
Details of the Device:
Nexus 7010 :
Software
BIOS: version 3.22.0
kickstart: version 5.1(3)
system: version 5.1(3)
BGP neighbor status :
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
172.16.1.2 4 65505 5089234 5194515 51359 0 0 6w2d 391
172.16.1.3 4 65505 5044293 5146859 51359 0 0 30w4d 378
172.31.11.3 4 15404 120744 114811 51359 0 0 1w6d 1
172.31.42.3 4 65501 5261796 5264413 51359 0 0 2d06h 0
Snmp trap enabled:
snmp-server user admin network-admin auth md5 0x690c4ede8a88ba7f2de791dbe7a77f0a
priv 0x690c4ede8a88ba7f2de791dbe7a77f0a localizedkey
snmp-server host 172.30.0.55 traps version 2c xxxx
snmp-server enable traps bgp
Downloaded cisco-bgp4-mib version, bgp4-mib tried and performed snmpwalk as given below
nnmsnmpwalk.ovpl -c xxx 172.31.15.130 .1.3.6.1.4.1.9.9.187.0.6
Error : No MIB objects contained under subtree
nnmsnmpwalk.ovpl -v 2 -c xxx 172.31.15.130 .1.3.6.1.2.1.15.3.
No MIB objects contained under subtree
Kindly advise to resolve the issue
Regards
Hari
You can set an alert for Warning State. This is feasible.
Juke Chou
TechNet Community Support
Similar Messages
-
Hi,
I seem to have an issue with two SAP Alerts that I setup.
1) One Alert is set to trigger every day morning at 9 AM.
2) One Alert is to trigger every day night at 11 PM.
The first alert set to trigger in the morning is works fine Monday to Friday. But is not triggered on Saturday and Sunday.
The second alert set to trigger at 11 PM at night is never triggered.
Can anyone tell me why this happens? Could it be because no SAP User is logged into SAP at these times? Or could it because of some other reason.
Thanks,
Krishnanhi krishnan
rightly
said by gordon for sap alert to take place a user should be logged on to the system and for your other concern that the trigger is not happening on saturday and sunday the u may try this may be that would work out for u under company details- hi\holidays click o the arrow a new window would pop up opening this window would release to u a new window where u have the option "Ignore weekends for payments" just give it a try thats usually for payment but it may work for alerts as well otherwise there are no other settings to control what u said
or if u are using a equerry for alert please make sure the query is set correctly
Regards,
Manish -
OPPP change is not triggering planning file entry flag?
We use alternate BOMs for a particular subassembly and depending on requirements
shuffle between BOMs using a different alternate for a certain time period.
However when we change the alternate in OPPP it is not triggering the change in the planning file.
Is there something we are missing here.
Thanks in advance.Dear ,
Frist of all , there is no such cutomisation to have planning file entry of any material.Planning files entries is the first step which checks by the MRP during the MRP run. if no entries are found for the selected parts then MRP will not plans these parts. You can create/check the planning files entries from T Codes-MD20/MD21 even before you creat FG BOM .
Planning file entries will be created automatically when you enter the relevent MRP type (example PD) in the material master MRP1 view. OR when there was a change relevent to MRP like stock change due to moveement type/GR/GI or change in material master data.
MRP does planning file rentry based on the MRP relevent changes like you have FG and valid BOM .Now based on the FG MRP4 BOM Slection Explosion method , MRP will explode the BOM from lowest level and there will be planning file entry while executing MRP on FG based on the FG requirement and dependent relation in BOM .
In you case , please check the following ;
1.Whether you have kept other alternative BOM status as Inactive-2 Iin CS02-BOM Header -Status long text and also re-assing this in Routing CA02 with correct valaidty .Check the validity of the BOM alternative which u have included for sub-assbly
2.You have all the material master parameters [MRP1-MRP4 view ] all in place specially MRP type PD, Procurement Type E or F
3.Specially , check BOM explosion /selection methods in SFG/FG level in MRP4-Sleection methoids should Blank or 1 BASED ON QTY OR maintain producxtion version with selection indicator 2 or 3.
4.BOM should have usage -1-Production , Status-1 -Active.
5.Run MRP-MD02-NETCH, 2,1,3,3,2
Check and come back
Regards
JH -
Event from Change document not triggerring
Hi
I've used chnage document FMRESERV to track change in table KBLP-DELTAWTAPP for any value change, but although I'm chnaging amount from FMX2, the event for this chanhe document is not triggerring. Can you please help me how to resolv the issue.Further, check if the change pointers are activated in transaction BD61 and if the pointers are maintained in transaction BD52. If these are maintained correctly along with the flag in the data element, the change pointers should be triggered.
Does this help? -
PO change output not triggered after deletion of line item
Hello SAP experts,
I have one issue with PO output
I have created PO with output type & we are outputing through ME9F( 3- Send with application own transaction)
Below is the sequence,
1.PO created & outputed thru ME9F
2.Now ,i added the line item in the PO,Output triggred but not processed.
3.I deleted the line item immedietely,Output not triggered.
(My question is Why the output is not tiggered?)
4.I outputed it through ME9F,vendor will receive only 1st output & never get the 2nd o/p for the deletion of item.
I am clear that after processsing the 1st output,then only i can process the 2nd.
But in business point of view,this scene created the problem.
Please provide your valuable input.Hi,
In IMG - Materials Management- Purchasing-Messages - Fields relevant to Print out of changes
Enter Table EKPO , Reference Field LOEKZ, tick on change print relevant for purchase order,in routine enter 03.
Now your Output will be triggered with a change indicator and you can process it using ME9F.
Regards
Chandra Shekhar -
Alerts not triggered for a RFC Adapter
Hi All,
I have done the alert configuration for triggering alerts whenever there is a problem in any communication channels of any adapter.i.e. I have given * for 'where did the error occur'.Alerts are being triggered for JDBC and File adapetrs.but when an error occurs in a RFC adapter no alerts are triggered.What can I do about it?
Thanks and Regards,
JishiJishi Abraham,
Could u please try <b>No Restrictions</b> in the <b>'where did the error occur'</b>
All of the File, JDBC and RFC adapters, reside on the Java Stack. Whenever there is a message being processed, by any of the adapters except for IDoc and HTTP, the config should be similar as far as the alerts are concerned.
Please try <b>No Restrictions</b> and let us know.
Reg,
-Naveen. -
'CHANGE' event not triggering for BTE 2214 on park/change from FBV1/FBV2
I have designed a workflow template for FI parking. If the parked document is rejected, i need to trigger FIPP 'CHANGE' event for sending workitem to approver when someone changes the parked document. In SWEL event trace, the 'CHANGE' event is not getting raised.
So i implemented a BTE 000002214 and now i am able to raise 'CHANGE' event and capture it in workflow. But this is only working when i park a document using FV50 transaction and later change it.
But when i park a document using FBV1 and then make changes from FBV2, the 'CHANGE' event is not being triggered in SWEL. Should i implement some other BTE like 2218 etc? Can you please help?Hi Gokul,
You can try handling the SAVE event instead of the CHANGED event.
T-code FBV2 will not allow you to save the document unless you make some changes.
Try implementing BTE 2218 and revert.
Thanks,
Sreekanth -
BPM File monitoring - Alerts not triggered.
Hi All,
we have defined the application monitor for file monitoring in BPM.
the problem is we are not getting any alerts so far,
the file monitoring paramaters we gave are
1. file path, filename * and pattern: az*
we are actually monitoring the availablity of the incoming file, there are also files existing of the same name, the only differentiator is the time stamp.
As per logic, we will be monitoring the latest file that reaches the folder. but no oupt till now.
can any one pls tell how can we proceed further, for the requirement mentioned above, all the necassary authorizations are provided.
kindly advice onHi Ragu,
Thanks for the reply.
The status is gray in RZ20. But when i see in dswp it is in green only.
I tried activating the file size and filae age parameters, according to setup guide it is mentioned that
After activating, the most recent file is considered for creation time of file.
for file size and file age , the existing file details are considered.
but in my case, creation time of file getting some alerts.....eventhogh no file has come after activation.
And file size and file age are still in gray when old file are there available in the specified folder.
kinldy advice on why this is happening.
Thanks and Regards,
Subhashini. -
Change pointer not triggered for LBKUM of MM02
HI im generating Idoc for material master change through BD21.
But when I change the value of Total stock (LBKUM) in accounting view of MM02
Im using transaction MIGO to update LBKUM value.
In this case change pointer is not getting generating....and there is no entry in CDHDR and CDPOS.
Please tell me how to generate change pointer for this field.
thanks,Hi lucky,
I am facing the same problem. Can you please let me know the solution you have used?
Thanks in advance for your help.
Navin -
Alerts not triggering in web client
I'm trying to get alerts to work on a Web IC in our CRM 2007 system
I am using the standard alert CMRELATEDDOCUMENTS
And have created the following Rule Policy in the rule modeler
Rule Policy Details
Context: Intent Driven Interaction (IC WebClient)
Name: Z_IC_BP_ALERT_RD
Business Roles
Business Role : Z_GL_CFI_IC
IC Events
IC Event: IC Events
It is Active and Valid in terms of dates
When i test using a user assigned the role Z_GL_CFI_IC and confirm a BP within the Web IC i am getting no alert.
Any ideas as to what's missing?
Thanks in advance
EddieHi Sam
In the role ZGL_CFI_IC I have assigned the function profile
INTENT_DRIVEN_INTERACTIONS DEFAULT
which is using the service manager profile IDI_DEFAULT
Is there a service in sicf that is required to be activated - i think i'm grasping at straws now!
Regards
Eddie -
Canvas ID not being used when Canvas is created by State change
After logging into my app I do a State change, which adds a
few more buttons on a Linkbar and adds two more sections to a
ViewStack. For the initial Canvas sections, I have an ID associated
with each. Upon clicking a button, for example, I can alert on the
value associated with each ID.
However, for the new Canvases that are added, this is not
working, even though an ID is associated with the Canvas. Instead,
it is just telling me "Canvas355", where the number is different
every time the app is initiated.
Does anyone have any ideas about this?
Thanks.
ChrisHoepfully this will help. It's just the function to pop up
the help window, but I put in an Alert.show to test with for now.
private function helpWindow():void {
helpinfopop = helpinfo(PopUpManager.createPopUp(this,
helpinfo, false));
helpinfopop.title="Help";
helpinfopop.showCloseButton=true;
helpinfopop.hscreen=allinfo.selectedChild.name;
Alert.show(allinfo.selectedChild.name);
PopUpManager.centerPopUp(helpinfopop);
"allinfo" is the ID of the main ViewStack. What happens, if I
just talk about the Alert.show function, is that for the 3 primary
Canvases, it will show the ID I defined. For the new Canvases after
the State change, it shows the random name/number. If I review the
config, every single Canvas has an ID set.
Thoughts?
Thanks for all the help so far.
Chris -
Alert is triggered but notification is not sent GC 12C
Hi,
I have created custom monitoring templates and applied them to target group and create notification rule and subscribed to it. Tested email from GC and it works fine. I see the tablespace alert is triggered and I can see it in GC - but it does not create any incident or send any notification.
Please let me know if you have any clues.
Thanks
-SumathyHi Sumathy,
Make sure that you have subcribed to an incident rule that matches the state (e.g. critical or warning severity) of the alert. Note that the out-of-box "Incident creation Rule for metric alerts" rule only applies to critical severity by default.
If necessary, see the following doc to troubleshoot notification issues.
http://docs.oracle.com/cd/E24628_01/doc.121/e24473/notification.htm#CACFGEDA
Regards,
- Loc -
Release notes for 2.16 states that there was a fix for alerts not being modal. We are using 3.0.6 and are experiencing the same issue; was there a regression to the modal fix. What version needs to be used to make sure that alert messages are modal?
We are trying to determine why alert boxes are not modal
The fix states it's for Firefox 2.0 - 3.7a1pre
We are using 3.0.6 not the current version of 3.6.13.
Add-on release notes 2.16.1
https://addons.mozilla.org/en-US/firefox/addon/foxyproxy-standard/versions/
Repeating 2.16 release notes since 2.16 was not made available for more than a couple of hours
Fixed bug whereby some alert boxes weren't properly parented/owned. This led to some alerts not being properly modal
with respect to the window/dialog that issued the alert. -
BADI ME_PROCESS_PO_CUST is not triggering while creating/changing PO
Hi,
I am new to BADIs,
I am trying to implement BADI ME_PROCESS_PO_CUST in ECC 6.0. I have done the implementation and activated. I kept a break point in PROCESS_ITEM method, but the BADI is not triggering while creating or changing the PO. Please advice me what could be the reason behind this?
I used the SQL trace but i couldn't get the BADI ME_PROCESS_PO_CUST in the list.
thanks in advance
Regards
Jagadishhello jagdish,
implement this user exit.....
MM06E005...
go to EXIT_SAPMM06E_017 in that then you can put a break point in the user defined function module.....
or use
BREAK 'C5133392' (use your user in place of C5133392)....it will stop here while creating PO or changing PO...
now you can do whatever you want to do in create or change PO using this function exit......
perform the validations on import parameters.....to create or change ....and activate the project....
hope this will give you some idea and help -
Lightroom is not saving metadata. I have done several things to save and I still get the tag that states is is not saved. I have also created 2 smart collections. One showing metadata has been changed and one showing metadata is not up to date. No matter what I do it is not showing in LR that it is saved. I spent 2 days with Seth Resnick trying to correct this and we re created my catalog. It was ok, until I imported new images and same problem. Now I have a new problem, when I bring image to PS it saves it but does not bring back to LR. Am I the only one out there who has this problem?
See:
How to use multiple iPods, iPads, or iPhones with one computer
What is the best way to manage multiple...: Apple Support Communities
Maybe you are looking for
-
Problemas de Comunicação com SEFAZ PE - Urgente
Boa tarde! Pessoal, Ontem a SEFAZ de PE ficou fora o dia inteiro. Hoje ao acessar o Portal, vimos que a SEFAZ PE está on. Mas no GRC, quando vou verificar o status de serviço da SEFAZ PE código 26, está inoperante. Alguém está passando por isso? Esto
-
[SOLVED] Another "Sound broken after upgrade" thread
Hi. My sound stopped working at some point, probably after an upgrade. I've seen lot's of posts about this in the last month, but nothing is helping. My guess is that OSS is screwing with ALSA. Here is what it says in my pacman log. Running OSS u
-
Problems with transparency in interactive PDFs
Hi, I am creating a 40pp document in InDesign CS6. The document is created as CMYK and will be issued as a printed piece but also there is an interactive version. For revision control purposes, I have created one document for both purposes, and have
-
Java.io.StreamCorruptedException Load
Hi There, I am getting java.io.StreamCorruptedException while doing applet-servlet communication. I am closing all the streams once done. But still during load i am seeing this exception in the logs though its not stopping the application to work its
-
How can I view/copy data from one Time Capsule backup to another computer
My MBP and MB both back up to Time Capsule. From the MBP I can see it's data on TC via my network but not the backed up data from the MacBook. How can I view and import MB data to my MBP from Time Capsule via AirPort? Thanks!