Nexus 7010 with F3 line modules. The modules are not "powering on" ?

Hi,
Just tried installing a new Nexus 7010, With a couple of F3 line modules.
I cant seem to figure out how to get them to come online.
They flash with red LED and from a "show module" they show as powered down.
Its a fresh nexus install, What could I be missing here? Do I need to "provision them somehow?
Thanks
L

Hi,
Its 6. something  ( Im not in front of it right now )
And im certain its these ones.
http://www.cisco.com/c/en/us/products/collateral/switches/nexus-7000-series-switches/datasheet-c78-730273.html
They are 48 port , 1/10G fiber. with "8 port groups.."
No idea if this helps at all.
Its a new install,
It contains the default VDC and an admin user. No other config has been done.

Similar Messages

  • TS3274 When I take pictures with my ipad 4, the pictures are not saved to the ipad, or not anywhere I can find them?

    When I take a picture or video with my ipad, the pictures are not shown in the camera roll or anywhere else I can find them.  Can anyone help me?

    When you take a photo there will be a small icon of the photo in the lower right corner. If you touch that it should take you to the photo in the camera roll.
    If that isn't happening have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
    No data will be lost.

  • HT1567 I have itunes and have not seen any of the podcasts I download updated past May 8th. Is there something wrong with my itunes that the podcasts are not uploading to my pc?

    My itunes is not showing any of the podcasts I download past may 8th. Is there something wrong with my itunes?

    Seconding this -- no podcasts have updated past May 8th. What is going on Apple?!?

  • TS1702 What's wrong with my ipad if the apps are not downloading

    I am trying to download some apps but all it says is "waiting" and I have been "waiting" for about an hour.  I do not have any (other) apps downloading except for the ones I am having problems with. Please help whenever possible.

    I have posted these suggestions many times and some of them have worked for other users in the past. Give them a try - in the order that they are typed below. Maybe something will work for you.
    1. Tap the "waiting" icon and see if you can pause it. If it does pause, then tap it again and see if it will resume. If that works, repeat the same steps for each "waiting" icon.
    2. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    3. Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
    4. If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
    5. You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
    6. You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.
    7. If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

  • When I open pages it scrolls through various numbers of blank pages with a line at the side, then stops at a document, but usually an old document. I have to  go to "open recent" to get on the page I want.

    Hi
    When I open Pages it scrolls through numerouss blank pages with a line at the side 1st, then settles on an old saved pages document.I then have to go to "open recent" to select the one I want. Why?

    No
    It's the 1st version of Pages I've had on my computer.
    Can't delete them as they scroll through them at a rapid pace. The longer I've had the problem the more blank pages it scrolls through.

  • When I press on a land line number, the phone does not call the number, but comes up with a screen to send a text to it.  How do I get my phone to default to phoneing a landline?

    When I press on a land line number, the phone does not call the number, but comes up with a screen to send a text to it.  How do I get my phone to default to phoneing a landline?  When I press a mobile number in contacts, the phone automatically phones the number.  I do not mind this as I hardly ever send texts, but I would like to have the option of what to do.  This seems such an obvious issue but I can not solve it even with much web searching.  Thanks!

    I can't delete my question, so I'll just say that you press on the type of number written in the box to the left of the box you typye the number into.  Dumb or what? 

  • IO7 in good, but the fine lines of the characters are a nuisance. Is there a way to convince Apple to offer a better style for aging persons with limited vision?

    iO7 in good, but the fine lines of the characters are a nuisance. Is there a way to convince Apple to offer a thicker letter type for aging persons with limited vision?

    I turned on Bold Text - the phone will restart itself, that's normal - and it is now MUCH easier on my eyes.
    Give it a try.

  • My macbook pro keeps freezing with vertical lines on the screen

    I have a 2010 macbook pro that has worked wonderfully until now.  As of late it keeps freezing with vertical lines across the screen.  To me this indicates a hardware problem, but I ran a diagnostic (restarted while holding D) and it didn't find any errors.  It seems that it happens when I move or bump my macbook, leading me to think it may possibly be a disk problem, but I'm not sure how to check this.  Anybody else ever have this problem or could suggest a fix for it?

    You can try a pram reset, which might help with the display, but the bumoing thing is what concerns me.
    PRAM reset:
    Power down, power back up and hold the following keys before the start up chime.
    option, command, P, R,(no commas) continue to hold these keys till you hear the start up chime 2 times then release.
    Reboot see if this helps, the bumping part scares me.
    Hope this helps

  • I have a IMac - Mac OSX version 10.4 and présently i see only verticals lines on my dashboard and my mouse still mouving but with a little square with vertical lines at the right. This appen when i was talking with a friend on Skype. I need help to unlook

    I have a IMac - Mac OSX version 10.4 and présently i see only verticals lines on my desktop and my mouse, i mean the arrow and still mouving but with a little square with vertical lines at the right. This appened when i was talking with a friend on Skype, by error i did click on the video and slowly the vertical lines appeared and covered all ma desktop. Since then, it still there and the only things i see it is the vertical lines and the arrow with the little square.
    How can i fix this problem ?
    En français: j'ai un IMac - Mac OSX version 10.4 et présentement je vois seulement des lignes verticales sur mon bureau et ma souris c'est-à-dire la flèche, bouge mais il y a un petit carré avec aussi des lignes verticales à sa droite. Je pense que ce bug est survenu lorsque j'étais sur Skype avec une amie et que par erreur j'ai cliqué sur l'image de la vidéo et peu à peu les lignes sont appurues et tout l'écran est envahie par ces lignes.
    Comment corriger le problème ? Merci à l'avance.
    Réjeanne Blouin

    Hello, sounds like Video card  and/or heat problems.
    Have you blown the dust out lately? Let it cool for an hour or so.
    Get Temperature Monitor to see if it's heat related...
    http://www.macupdate.com/info.php/id/12381/temperature-monitor
    iStat Menus...
    http://bjango.com/mac/istatmenus/
    And/or iStat Pro...
    http://www.islayer.com/apps/istatpro/
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode).

  • On XP Machine dedicated to Lookout 6.5. The Hypertrends are not moving at proper pace according to the scale at the bottom of the trend graph. After 60 seconds it is 40 seconds behind, so the trace makes up the time with a straight line an repeats.

    On XP Machine dedicated to Lookout 6.5.  The Hypertrends are not moving at proper pace according to the scale at the bottom of the trend graph.  After 60 seconds it is 40 seconds behind, so the trace makes up the time with a straight line and then repeats.  Even without any traces on the graph, it does the same thing.
    I've uninstalled and reinstalled the 6.5 software.  Nothing else runs on this machine.  It is dedicated to Lookout.  I've installed a gauge object, with the same datapoint that the hypertrend is trying to graph, that updates very rapidly with no problem, so doesn't appear to be a network problem.
    I'm only tracking one datapoint, at this time, until this issue is solved.  Help please?

    Here is the screen shot.
    Definitions for this post:
     - "streaming data" = Data coming in over ethernet from datapoint that is being polled.
     - "1 scale-second" = 1 second of time based on the scale on the bottom of the graph
    Remember that data continues to trace.  However, according to the scale at the bottom of the graph, the graph traces 60 seconds of streaming data in @10 scale-seconds, then displays .01 second of streaming data over 50 scale-seconds.  The .01 second of data is the long straight lines that you see between the rapid data traces that appear to be 50 scale-seconds.
    Even without any datapoints being traced, the graph clicks forward 1 scale-second every 6 real-time seconds.  It does this for @10 seconds then clicks forward  @50 scale seconds, instantly.  Then repeats, as you can see in the graph.
    The gauge that is on the same control panel, that you see in the screen shot, is tracking the same data point as the graph.  It is polling the data point at real time and never stops updating, so I know that the network is streaming just fine.
    513.850.9509 - if I can help clear things up.
    Attachments:
    LookoutFunkyGraph.jpg ‏347 KB

  • I have a gray screen with white lines at the top

    I have a gray screen with white lines at the top  what does that mean?

    Hi,
    Time to take it to an Apple store or Apple certified repair provider.
    iPod Nano support here.  http://www.apple.com/support/ipod/
    Carolyn 

  • Problems with horizontal lines on the iMac. Someone knows the solution?

    For several months my Imac has horizontal lines have been growing. Problems with horizontal lines on the iMac. Someone knows the solution?

    You have 14 days to return the computer w/no questions asked.  Plus you have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
    Strongly suggest that you take FULL advantage of the above before it runs out.  Let Apple deal w/the problems.
    That being said, no new Mac comes w/Snow Leopard which your profile confirms you have.
    Mac OS X (10.6.8)

  • Migrated to systemd, modules are not loading [solved]

    Hi;
    I got around to migrating to systemd, but now modules are not loading. I got this setup (i gave full permissions thought it would help):
    $ ls /etc/modules-load.d/
    -rwxrwxrwx  1 root root   20 Dec  2 22:34 vbox*
    $ cat /etc/modules-load.d/vbox
    #vbox
    vboxdrv
    loop
    Any methods of debugging why this doesnt work?
    Thanks.
    Last edited by daf666 (2012-12-03 21:01:26)

    the files have to end with ".conf". And -x permissions are certainly not necessary.
    man modules-load.d

  • TS3048 I have just purchased a new apple cordless keyboard.  The numeric line of keys along the top are not functioning as they should.  For example I am unable to get a question mark or a forward slash.  I have tried holding down both shift and alt keys.

    I have just purchased a new apple cordless keyboard.  The numeric line of keys along the top are not functioning as they should.  For example I am unable to get a question mark or a forward slash.  I have tried holding down both shift and alt keys.

    Thanks for prompt response - I tried what you suggested but I'm afraid it has not helped.  It seems as though the line of number keys along the top aren't actually doing what is printed on them.  Some are OK, but the further towards the right hand side of the keyboard you go, the less predicatable it becomes.  So whilst the second key from the left gives me 1 and ! when holding the shift key, by the time I get to the 6 when I press and hold shift I get ^ rather than & symbol which is what is actually printed on the key.  The & symbol is actually on the next key along - and when I hit the key with 8 I get * rather than the ( which is printed on they key but actually located on the next key along.  Things get even more muddled by the time I am over on the right hand side as rather than a question mark (I have had to type the word as I cannot find the symbol anywhere!) I get this _ and the other symbol marked on the key is a comma, but I get - instead.  It is going to drive me mad if every time I want to type something it is a guessing game....!  What do you suggest - question mark

  • When sharing iMovie11 project  with iDVD inmediately message 'the project could not be prepared for publishing because an error occurred (Error in user parameter list).  Finalize issue?

    When sharing my 60 minutes iMovie project with iDVD inmediately message 'The project could not be prepared for publishing because an error  occurred (Error in user parameter list)' appears. Could not find the user parameter list, so I've no more info about this error.
    Option File - Finalize Project gives inmediately the same errormessage.
    Also option Share - Media Browser - Large/Medium/Mobile give the same errormessage.
    Please advise, thank you!

    Additional info: trying to write to internal disk (268 GB Free out of 499 GB)
    Please advise, alko80

Maybe you are looking for