Nexus 7710 F348's TCAM Allocation Errors

Having issues with new core on 7710's upgraded from 6.2(8a) to 6.2(10) running ACL's on all SVI's, Netflow, and DHCP Snooping with one VDC added along side the admin VDC with 2 F348 line cards and dual-sups. The 6.2.10 upgrade was due to TCAM errors before finishing the entry of all ACL's. After the upgrade I entered the command for hardware access-list resource feature bank-mapping. Remaining ACL entries entered without issue, Netflow and DHCP snooping started.
During redundancy testing I can reload vdc 2 and while everything performs flawlessly when the vdc returns back online module 1 cannot be allocated back into the vdc due to tcam allocation error. Checking the tcam allocation resources I see tcam 1 bank0 is half full, tcam 1 bank 1 is empty as is all others.
Can this be reallocated, re-shuffled around for better distribution ?? Do I have to REMOVE everything and reconfigure to do this ?? Dont like having to reset the entire switch to recover modules if a vdc reloads but at least the constant errors seem to have stopped unless trying to configure or unconfigure the bank-mapping to try resource pooling, even with atomic updates disabled.
Please advise, dont have time to call Tac right now, hope someone has been thru this already,
thanks in advance.
dave

In the inital post where I put "
The N7K sees the server MAC in the FIP snooping, it also sees the 5548 as it's FCF. But the 5548 vfc is stuck in "initializing".
I meant to put N4K...not N7K...sorry about that.

Similar Messages

Allocation error when I create production order

Hi guys:
I met allocation error when I created production order with CO01.could you help me out?urgent!

hi
What is the excatly the error so that we can tell u the reason
regards
ramakant

"Memory Allocation Error" when Building a DVD

Hi all!
I have a problem. When I start to build a DVD. Encore stops with a "memory allocation error". The project I tried to build is 3.06 GB, so it's must fit to a simple DVD. My HDD has enought free space.
I tried to build it on two totally different computers but the error is the same. I didn't find any answer for this error. Can anybody help me?
I use Encore CS4, and the project is made in Premiere Pro CS3.
The computer #1:
Windows Vista (but I tried also with XP)
1 GB RAM
250 GB HDD
The computer #2:
Windows Vista
2 GB RAM
160 GB HDD

I get the same! I was having an issue with video files from my digital camera, so I opened up Premiere CS3, which took them in and encoded them to MPEG-2 just fine (tisk-tisk! Premiere and Encore CS4 both failed to play them or encode them properly!!!)
Them I put these MP2 files into a project which has 2 menus, 4 video timelines, 2 slideshows with 200+ images and some background audio files (one linked to a menu, another plays in sequence after first finishes). The project is for PAL screen, and it is 4-some Gb, but less than a disk. I have 4Gb of RAM and 6Gb of page file, 70Gb free on my HDD. Running Vista Ultimate x64.
Slideshows render, and videos do not require transcoding, so the project is ready to build, it starts writing the ISO file, and crashes after 1.8-1.9Gb is written.
There seems to be no easy way to re-create my slideshow, or I would have just re-built the entire Encore file to see if that would work.
My PC is overclocked, I admit, I have not tried it without an overclock, but my system has been uber-stable for 12+ months! I will try and report if it fixes anything, but I doubt it. I have also tried to run this build after a fresh reboot with mostly everything turned off, to prevent system conflicts. If that's what it is, I must have missed something. But Encore CS4 is BUGGY LIKE GOD KNOWS WHAT!!!!! This is one crash I can't get around, but it's not the only one I've had. If anyone knows an answer, PLEASE post it here! Adobe guys please please please please! My project's already held up for a month!

Memory Allocation Error during Boot

Hi,
I am posting this on a different computer than the one on which I istalled Java because I can no longer get it to boot.
Here's the history:
I am working in Windows 98
I added a line to the autoexec.bat so that the PATH lines looked like this:
SET PATH=C:PROGRA~1\UTILIT~1\SYMATEC\PCANYW~1
PATH=%PATH%;"C:Program Files\Mts";"C:j2sdk1.4.0_02\bin
I then rebooted and tried the javac and java commands in different folders and everything worked fine. I shut down the computer and tried to reboot a day later. The following are pieces of the message I received (I don't usually go near the autoexec.bat or system settings so I have no idea how to get past these errors, nor fix them):
SET PATH=C:PROGRA~1\UTILIT~1\SYMATEC\PCANYW~1
PATH=C:WINDOWS;C:WINDOWS\COMMAND;C:PROGRA~1\UTILIT~1\SYMATEC\PCANYW~1;"C:Program Files\Mts";"C:j2sdk1.4.0_02\bin
General Protection Fault in C:WINDOWS\SCANDISK.ALT at 0090:1921
Memory Allocation Error
Cannot load COMMAND, system halted
Please help!
Thanks,
Julie

SET PATH=C:PROGRA~1\UTILIT~1\SYMATEC\PCANYW~1
PATH=C:WINDOWS;C:WINDOWS\COMMAND;C:PROGRA~1\UTILIT~1\SY
ATEC\PCANYW~1;"C:Program
Files\Mts";"C:j2sdk1.4.0_02\bin
General Protection Fault in C:WINDOWS\SCANDISK.ALT at
0090:1921This shouldn't have been caused by the Java installation. As I understand the situation, at load time scandisk has been called. This is usually due to the computer not having been shut down properly, or a sign of real problems. However, scandisk is unable to run.
You should try a forum/newsgroup for Windows for more help. My own suggestion would be to load to the command prompt (or try safe mode). (Press F8 during boot to get a menu.) And then run scandisk manually. If it works, try renaming the C:\WINDOWS\SCANDISK.ALT file and rebooting.
Regards,
Bhaveet

Checkdb found 6 allocation errors , how to fix ?

HI Experts,
checkdb found 6 allocation errors, how to fix ?
Thanks in Advance!
Vijay

Causes
file system corruption,
underlying hardware system issues,
driver issues,
corrupted pages in memory,
problems with the SQL Server Engine.
Possible solutions
1.best solution if CHECKDB reports consistency errors is to restore from a known good backup.
2. If you cannot restore from a backup, then CHECKDB provides a feature to repair errors.
3. If system level problems such as the file system or hardware may be causing these problems, it is recommended you correct these first before restoring or running repair. 4. Allocation error in Index page, please recreate the index.
Thanks - Vanchan.Please MARK AS ANSWER, if my answer is useful to U.

What is root cause of Error in InitVXI library. Allocation error in initialization?

The error result after executing ResMan; Error: Error in InitVXI library. Allocation error in initialization.
Hope you can help, thanks....

Hi ctapa,
If by chance you receive this error when attempting to run ResMan outside of Measurement & Automation Explorer (MAX), then you will want to refer to this KnowledgeBase article, which details how to fix such an error/crash.
Curious--what operating system do you run for your VXI system? Also, what version of NI-VXI do you have installed? (You can check this in MAX, beneath the Software tree) In addition to the "Error in InitVXI Library..." message you receive, do you see your system
exhibiting any of the problematic symptoms mentioned here? Replying with any additional information on your system and setup would be most welcome and aid in finding the cause of the issue.
Kind regards, and happy holidays!
Warm regards,
pBerg

Memory allocation error when burning in premiere elements 2

I have premiere elements 2. I happily burnt a version of my dvd then suddenly it stopped burning and I had the above message during the burning section of the process. My computer has adequate memory to run this programme and nothing new has been added. I then downloaded Premiere elements 7 as a trial and burnt this Dvd yesterday. However today it won't burn through 7 either so i am reluctant to upgrade unnecessarily. Can anyone shed light on why I receive this error message.
Other things seem to burn but I am beginning to receive messages that Adobe is low generally on memory allocation.
Regards
Erika

memory allocation error when burning in premiere elements 2
Erika Lindsay - 09:30am Jan 4, 2009 Pacific
I have premiere elements 2. I happily burnt a version of my dvd then suddenly it stopped burning and I had the above message during the burning section of the process. My computer has adequate memory to run this programme and nothing new has been added. I then downloaded Premiere elements 7 as a trial and burnt this Dvd yesterday. However today it won't burn through 7 either so i am reluctant to upgrade unnecessarily. Can anyone shed light on why I receive this error message.
Other things seem to burn but I am beginning to receive messages that Adobe is low generally on memory allocation.
Regards
Erika

Encore - Memory Allocation Error - With Dynamic Link

CS4 using Vista
The process (AdobeEncore.exe *32) gets stuck at 959,736K while 6GB is available.
In the past I have built many DVDs using a Dynamic Link from Encore to Premiere Pro.
Now they all end in errors: Memory Allocation Error & Unable to Create Image Buffer.
I monitored the process in the Windows Task Manager.
The memory use for the (AdobeEncore.exe *32) process grows until it reaches 959,736K.
The memory use stops there but the process continues for a while and then Encore stops with the errors.
I guess is that (AdobeEncore.exe *32) has become limited to 1GB but the is plenty of memory available.
I can Import a file and make a DVD without using the Dynamic Link.
Thanks

Was probably a hardware issue.

Memory allocation error with disk image

I'm having recurring problems with a large encrypted sparseimage that I mount at /Users (an arrangement I prefer to FileVault.) The file contains one journaled HFS+ partition. Every so often, open files on the volume vanish or become unwritable. At the same time, I get a long series of messages in the system log of the form
kernel[0]: disk4s2: memory allocation error.
There's plenty of memory available. When this happens, I have to log out all staff users, then unmount and remount the image. When I do so, fsck finds corrupted i-nodes, which it's able to repair. All is then well for a few days, except that the files that were affected when the problem occurred are gone and have to be replaced. I've tried the obvious things many times: creating a new image file from backups, deleting kernel caches, etc.
This looks like a bug in the HDI driver. I'd be thankful for genuine insight from anyone who actually knows something. Responses such as "Repair permissions" or "Reinstall Mac OS X" aren't needed. Thanks.
Dual G5 2.5 Mac OS X (10.4.8)

Was probably a hardware issue.

CHECKDB found 0 allocation errors and 1 consistency errors in table 'sys.syscolpars' (object ID 41)

Msg 2511, Level 16, State 2, Line 1
Table error: Object ID 41, index ID 1, partition ID 281474979397632, alloc unit ID 281474979397632 (type In-row data). Keys out of order on page (1:187), slots 9 and 10.
CHECKDB found 0 allocation errors and 1 consistency errors in table 'sys.syscolpars' (object ID 41).
CHECKDB found 0 allocation errors and 1 consistency errors in database 'db_name'.
repair_rebuild is the minimum repair level for the errors found by DBCC CHECKDB (adv_tvs).
Help required on the above error mentioned

Hi Rapunzel,
The minimum repair suggested is repair_rebuild you can try that. As per mssage there is corruption in your database and it can only be corrected by either repairing or Restoring from known good backup.For doing repair the database must be in single-user
mode.
Please read
dbcc checkdb repair_rebuild option
Since DBCC CHECKDB with any of the REPAIR options are completely logged and recoverable, Microsoft always recommends a user use CHECKDB with any REPAIR options within a transaction (execute BEGIN TRANSACTION before running the command) so that the user can
confirm he/she wants to accept the results of the operation. Then the user can execute COMMIT TRANSACTION to commit all work done by the repair operation. If the user does not want to accept the results of the operation, he/she can execute a ROLLBACK TRANSACTION
to undo the effects of the repair operations.
REPAIR_REBUILD does not repair errors involving FILESTREAM data.
How big is database. If it is small and backup also is corruption free you should consider restoring from backup
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Resman error: VXI A24 address allocation error on bus 0

When we execute resman.exe on our test system the following error occurs:
VXI A24 address allocation error on bus 0
We have the MXI Controller configured the same as other systems and our configuration is a pc and two VXI chassis. Anyone have any ideas on what could cause this error?

Hi Jim,
I do not immediately know the solution to the problem you are seeing, but have a few troubleshooting suggestions:
1. Check the pins on all of your MXI-2 connectors. If the cable
has damaged pins which cannot be bent back to place, you will want to
replace the cable.
2. Try a single VXI chassis, and then the other. If the problem
occurs with each chassis individually, then it is likely an issue with
the PC or cabling.
3. If the problem only occurs with one of the chassis in step 2, remove
all instruments from the chassis and try running resman again. If
this solves the problem, add your instruments back one at a time to
isolate which instrument could be causing problems.
4. If the problem occurs with both chassis in step 2, do you have another PCI-MXI-2 that you could try?
Let us know the results of your troubleshooting, and we'll be happy to help you out further.
Jason S.
Applications Engineer
National Instruments

Cisco nexus 7710 power

Hi,
I have a Cisco Nexus 7710 using the 3KW AC power supplies. Based on http://www.cisco.com/c/en/us/products/collateral/switches/nexus-7000-series-switches/data_sheet_c78-729141.html?cachemode=refresh , it seems that the maximum input current is 20A while the power cord indicated on the link is rated 16A; I was wondering if a 20A power cord may be required instead since the maximum input current is 20A?
For the circuit, not too sure if it can be connected to a 16A circuit?
Any suggestion is appreciated.

It says...
"With Cisco NX-OS Release 6.2(6), you cannot interoperate the F3 Series plus the F2 and/or F2e Series plus the M2 Series modules in the same VDC."
If I've understood well...is not possible to do a LACP etherchannel on two different modules...right?

Fabric Interconnect Uplinks to Nexus 7710

Can someone please help suggest how many Fabric Interconnect switches I can uplink to pair of Nexus 7710's.

in most deployment, Fabric Interconnect is put as a pair for the redundancy. They are either vPCed to the Nexus switches or straight-through up to non-Nexus switches.
i guess we would like to see more background of your questions in term of traffic requirement, what kind of line cards used on the N7710 etc.
Regards,
Michael

Targetdataline.stop() causes memory alloc error

Hi,
Im trying to run a Thread that records Audio when I press a button. I have no problem starting the thread, but I cannot seem to stop it without receiving memory alloc errors. Im try to stop is using targetdataline.stop followed by targetdataline.close .
I am running Java SE 6 version 1.6.0_29-b11-402, on Mac OS X (I am also using Netbeans IDE 7.1)
java(20704,0x1100ec000) malloc: *** error for object 0x2f6a6f72706c2e68: pointer being freed was not allocated
*** set a breakpoint in malloc_error_break to debug
Java Result: 134
public AudioThread(String fileName) throws LineUnavailableException {
soundFile = new File(fileName+ ".wav");
audioFormat = new AudioFormat(8000.0F, 16, 1, true, false);
dataLineInfo = new DataLine.Info(TargetDataLine.class,audioFormat);
targetDataLine = (TargetDataLine) AudioSystem.getLine(dataLineInfo);
audioInputStream = new AudioInputStream(targetDataLine);
targetDataLine.open(audioFormat);
@Override
public void run(){
try {
AudioSystem.write(audioInputStream, Type.WAVE, soundFile);
catch (IOException ex) {
Logger.getLogger(AudioThread.class.getName()).log(Level.SEVERE, null, ex);
public void startThread() throws LineUnavailableException {
targetDataLine.start();
super.start();
public void stopThread() throws IOException{
targetDataLine.stop();
targetDataLine.close();
Thanks,
Lucas

It seems to happen after the close() .
I tried moving the targetdataline.close() at the end of run() function (after the AudioSystem.write() ), but no such luck.
public void run(){
try {
AudioSystem.write(audioInputStream, Type.WAVE, soundFile);
catch (IOException ex) {
Logger.getLogger(AudioThread.class.getName()).log(Level.SEVERE, null, ex);
targetDataLine.close();
public void stopThread() throws IOException{
targetDataLine.stop();
...

How does switching capacity of Nexus 7710 and Nexus 7718 calculate?

Hi everybody.
I found the nexus 7700 Fabric datasheet there was 220G per slot.
For example, the nexus 7710.
There was 220G per slot per fabric module and result is 6*220G*8=10560G, duplex is 21120G=21T.
How does the 42T came from?

Hi,
The 42 Tbps number Cisco are quoting is for the Nexus 7718 platform. If you look at the Cisco Nexus 7700 Switches Data Sheet you'll see it quotes:
The Cisco Nexus 7710 has six fabric module slots to provide simultaneously active fabric channels to each of the I/O and supervisor modules. Through the parallel forwarding fabric architecture, the Cisco Nexus 7710 can achieve 21 Tbps of forwarding capacity or more.
And for the Nexus 7718:
The Cisco Nexus 7700 18-Slot Switch has six fabric module slots to provide simultaneously active fabric channels to each of the I/O and supervisor modules. Through the parallel forwarding fabric architecture, the Cisco Nexus 7700 18-Slot Switch can achieve 42 Tbps of forwarding capacity or more.
So for the Nexus 7718 platform we have 220 Gbps * 6 Fabric Modules * 16 I/O slots totaling 21,120 Gbps. If we double that for full duplex we'll have 42,240 Gbps or 42 Tbps.
Regards

Nexus 7710 F348's TCAM Allocation Errors

Similar Messages

Maybe you are looking for