Nexus 7k is going to be restarted if excute the claer mac address command

Hi all,
We are facing some issues in Nexus 7K.when we excute the clear mac address command,it is going to be restarted.
Could you please suggest me what might be the reason ?
Thanks & Best regards,
Krishna Chintada

I have no experience with Nexus but wondered if you could set the device to reload in 10 like in IOS and then clear the MAC address table. If it didn't restart after clearing the MAC table you could do reload cancel. Although the bigger issue still remains its probably a bug.

Similar Messages

HT2848 is it true Mac is going to retire 2005 version of the Power Mac G5 support?

How can one with a Power Mac G5 get updates when Mac expires support to this system?

Obsolete products are those that were discontinued more than seven years ago. Apple has discontinued all hardware service for obsolete products with no exceptions. Service providers cannot order parts for obsolete products. These include ALL G4 models. On November 23, 2011 all G5 models were declared as 'vintage'. Obsolescence cannot be far behind.
http://support.apple.com/kb/HT1752?viewlocale=en_US

This just started happening.. I open Itunes and the little round rainbow loading indicator just goes on and doesnt stop.. My itunes wont function.. It gets stuck. Then i have to force quit.. I tried to shut down and restart. also reloaded the latest itune

This just started happening.. I open Itunes and the little round rainbow loading indicator just goes on and doesnt stop.. My itunes wont function.. It gets stuck. Then i have to force quit.. I tried to shut down and restart. also reloaded the latest itune 11.1.3 and it still gets stuck.
i use an external HD and thats fine.. all files are in there. But I have no idea why my itunes app is getting stuck.
Am I the only person this is happening to? What can I do to correct this problem?

Hi marlonbnyc!
This article will help provide some basic troubleshooting steps that will serve as a guide for you to resolve this issue:
Mac OS X: How to troubleshoot a software issue
http://support.apple.com/kb/ht1199
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

When ever the power goes out or I restart my iMac the external hard drive that is used by Time Machine for backups is dismounted ?

When ever the power goes out or I restart my iMac the external hard drive that is used for backups by Time Machine is dismounted and all backups are gone. I can reselect it and it will start working again, but I am worried if the iMac hard drive should fail will I be left without a backup ?

fzgy wrote:
"Mac OS X can't repair the disk. You can still open or copy files on the disk, but you can't save changes to files on the disk. Back up the disk and reformat it as soon as you can."
It's possible a heavy-duty 3rd-party disk repair app can fix it, but they're expensive (DiskWarrior is about $100), and there's no guarantee it can do it.
Am prompted to reformat but I don't have a good understanding of what this means and how to do it.
That will erase it. See Time Machine - Frequently Asked Question #5.
It sounds very much like the disk is beginning to fail, although it's possible there's a bad port, cable, connection or power supply (if it has its own).
I'd suggest getting a new one, and using it for your Time Machine backups; once you have a good backup there, reformat the old one (and select Security Options to write zeros to the whole drive -- if that fails, you know the drive is toast). Use it for secondary backups, per FAQ #27. If it has failed, get a second new one for secondary backups.

My screen is gone black when I restart I get the chime but no picture mac book pro can any help get me going again

My screen is gone black on my mac book Pro.when I restart I get the chime but no picture mac.can any help get me going again

Is the TV at minimum a 1080p with an HDMI port?
What is your Machine ID? DO NOT give us your serial number. We just need the x and y values of the Machine ID in your system profiler as given in this format:
MacBook Pro x,y
This will tell us what display cables can connect to your TV.

HT5137 How can I get my castleville legends to connect to facebook? I select the option to connect, it goes to facebook and back to the app, but it still won't connect. I have both restarted the app and my phone wiht no luck.

How can I get my castleville legends to connect to facebook? I select the option to connect, it goes to facebook and back to the app, but it still won't connect. I have both restarted the app and my phone wiht no luck.

Hello sdrail81,
The following article provides tips that can help resolve most issues with apps from the App Store.
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Cheers,
Allen

Hi, for the last week everytime i open firefox i get a message to download 36.0.4. I update firefox, restart an then the same message appears. What's going on?

hi, for the last week everytime i open firefox i get a message to download 36.0.4. I update firefox, restart an then the same message appears. What's going on? What can I do?

There is a new update available today for version 37, please do post back if this also happens for this update.
Please update to the most recent version of Firefox:
*[[Update Firefox to the latest version]]

I am having problems shutting down my MacBook Pro. I go to the apple and click shutdown or restart, it appears the shutdown process starts, the screen goes blue and the little circle keeps going round and round, but nothing happens even after 30 minutes.

I am having problems shutting down my MacBook Pro. I go to the apple and click shutdown or restart, it appears the shutdown process starts, the screen goes blue and the little circle keeps going round and round, but nothing happens even after 30 minutes.

Make sure you quit all your applications before shutting down.
And try resetting the SMC.
Intel-based Macs: Resetting the System Management Controller (SMC)

HT4904 I need to repair my start up disc so I have to start up from installation disc. In doing so, my computer restarts, I hear the mac sound, then a grey screen and then turns off and goes on in this cycle endlessly. Why can't I restart from disc?

I need to repair my start up disc so I have to start up from installation disc. In doing so, my computer restarts, I hear the mac sound, then a grey screen and then turns off and goes on in this cycle endlessly. Why can't I restart from disc?

Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple
logo appears.
5. Wait for installer to finish loading.

Z10 Screen goes blank, when restarted now rotates between blackberry screen and blue loading screen

Last week I was having issues with my blackberry where the screen was going blank and I had to restart the phone. I had recently installed a software update and so when I took it into Telus the guy explained that the sotware may not hae installed correctly so he walked me through the blackberry restore steps via blakcberry link. So I did restore my blackberry.
But a couple days later, it's back to its old tricks - the screen just goes black and I have to restart it. The trouble it is won't currently restart. At the moment it is rotating between the black and white "Blackberry" screen and the blue loading screen.
Was I unlucky enough to have the software install incorrectly both times, or is there something else going on?

ctyers wrote:
Last week I was having issues with my blackberry where the screen was going blank and I had to restart the phone. I had recently installed a software update and so when I took it into Telus the guy explained that the sotware may not hae installed correctly so he walked me through the blackberry restore steps via blakcberry link. So I did restore my blackberry.
But a couple days later, it's back to its old tricks - the screen just goes black and I have to restart it. The trouble it is won't currently restart. At the moment it is rotating between the black and white "Blackberry" screen and the blue loading screen.
Was I unlucky enough to have the software install incorrectly both times, or is there something else going on?
Blue loading screen? That is hardly known to be a "loading screen".... does the device get out of the blue screen by itself or you have to intervene?

Multicast mac-address Nexus 7k

Hi,
i'm going to use Nexus 7000 in Data Center.
During analysis configuration, I need define mac-address-static configuration for multicast mac address for Firewall Checkpoint cluster.
In "Layer 2 Switching Configuration Guide, Release 4.1.pdf" documentation speak about
"Configuring a Static MAC Address
[..]You cannot configure broadcast or multicast addresses as static MAC addresses[..]"
Have you a suggestion to manage this problem and why is it not possible configure mac address static multicast?
Regards
Dino

Joseph - The ClusterXL A/A configuration is a variation of the StoneSoft or Rainfinity clustering technologies that have been used to cluster Solaris and other *NIX flavored servers and firewalls for years. (In fact, StoneSoft filed suit against Check Point in Europe 8 or 9 years ago for patent violations, and lost.) These configurations were very common on Check Point clusters running on Solaris from the late 90's forward - and, as you describe, have unicast IP's with a multicast MAC for the VIP. Even from the days of installing these on the brand new (at the time) 2900 series switches you had to do exactly as you state above - static MAC entries (or in some cases port mirrors) so traffic was directed to both active switch ports. In Active/Passive mode Check Point ClusterXL clusters are almost always "plug and play" today - rarely do the switches need anything beyond speed/duplex settings. The VIP assumes the MAC of the physical NIC it is currently bound to, and therefore there are no issues as far as switch config or proxy ARP entries on the gateways. All of these issues have to do with traffic flowing to the VIP and through the firewall, and the ability of the switch to correctly identify which physical switch port(s) the VIP is currently patched in to. This is one of three types of traffic associated with ClusterXL itself. The second is state synchronization, which is accomplished through a crossover cable and therefore not relevant. Even when using a switch state sync is a typical TCP 18181 connection from a unicast IP/unicast MAC on one gateway to the other through a dedicated interface pair.
The challenge described by CJ is not with the traffic flowing to the VIP, however. It is an entirely separate process - Check Point Clustering Protocol (aka CPHA if filtering in WireShark) is essentially the heart beat traffic. Every interface pair within a Check Point cluster continually communicates with its "partner" interface on the other cluster members. If any packet takes over 100ms or shows more than a 5% loss the gateway is forced in to "probing" mode where it falls back to ICMP to determine the state of the other cluster member. Depending on the CPHA timing settings an active gateway will failover to the passive in as quickly as 500ms or so. ClusterXL will fail over the entire gateway to the standby to avoid complications with asynchronous routing.
Out of the box, CCP is configured to use multicast, but it supports broadcast as well. To change this in real time (no restart required) simply issue the command:
cphaconf set_ccp {broadcast/multicast}
At the Ethernet level, CCP traffic will always have a source MAC of the Magic MAC of 00:00:00:00:xx:yy where XX is the “Cluster ID” – something identical on each cluster member but unique from one cluster to another, and YY is the cluster priority (00, 01, etc.) based on the priority levels set on cluster members within Dashboard on the cluster object. The destination MAC will always be the Ethernet broadcast of ff:ff:ff:ff:ff:ff.
At the IP level the source of CCP will always appear as 0.0.0.0. The destination will always be the network address (ie, x.x.x.0).
Similarly in multicast mode you will see the same traffic at the IP level but at the Ethernet level the destination will now be a IPv4 multicast MAC (ie, 01:00:5e:4e:c2:1e).
In a tcpdump with the –w flag opened in WireShark and a filter applied of just “cpha” (without the quotes) you should see a continual stream of traffic with the same source and destination IPs on all packets (0.0.0.0 and network IP), the destination of either a bcast or mcast MAC and the source MAC alternating between 00:00:00:00:xx:00 and 00:00:00:00:xx:01.
Long story short, the problem CJ is describing is a behavior on the 7K where a packet capture taken on the Check Point interface itself (ie, tcpdump –i eth0 –w capture.cap) ONLY shows CPHA traffic from it’s own source MAC and no packets from it’s partner. A tcpdump on the 7K itself will show traffic from both.
As CJ mentioned, a simple NxOS upgrade will fix the issue per:
This one:CSCtl67036 basically pryer to NX-OS 5.1(3) the nexus will discard packets that have a source of 0.0.0.0. Which in broadcast mode is exactly what the CCP heartbeat is. We bypassed this one.CSCsx47620 is the bug for the for static multicast MAC address feature but it requires 5.2 code on the 7k
(NOTE:Additional RAM may be required for the 5.2 update)
Also note that Check Point gateways do support IGMP multicast groups, given that you have the correct license. It is a feature of SecurePlatform Professional on the higher end gateways or as a relatively inexpensive upgrade on the lower end boxes or open platforms. For lab purposes you can simply type “pro enable” at the CLI (without the quotes). As of the latest build there is no technical limitation (no license check) so you can enable advanced routing features as needed for testing in a lab. For step by step details on configuring IGMP on SPLAT Pro go to the Check Point support site and search for sk32702.
This can be a frustrating issue to troubleshoot, so hopefully this helps someone avoid the headaches I ran in to.

When Broker Restarts None of the Temporary Queues Are Created

Somehow when the broker restarts none of the temporary queues are getting recreated. The queues were created successfully the 1st time and the applications were happily exchanging messages. Things just fall apart when the broker restarts.
I'm able to reproduce this problem consistently by doing the following:
1. Start imqbrokerd (mq start)
2. Start client application
3. Shutdown imbrokerd (mq stop)
4. Start imqbrokerd (mq start)
After the producers in the client application have reconnected the following messages are displayed in the console. I'm only able to get the client app to work again is if I restart the client apps.
[02/Mar/2009:23:01:01 CST] attempting to set Message Bytes Limit to 10485760K for destination temporary_destination://queue/192.168.20.14/49823/1 [Queue]
[02/Mar/2009:23:01:01 CST] attempting to set Message Size Limit to 10240K for destination temporary_destination://queue/192.168.20.14/49823/1 [Queue]
[02/Mar/2009:23:01:01 CST] [B1065]: Accepting: [email protected]:57123->jms:37646. Count: service=9 broker=9
[02/Mar/2009:23:01:01 CST] [B2083]: Unable to create destination temporary_destination://queue/192.168.20.14/49823/1 [Queue], autocreation is forbidden
Do you guys have any idea on what's going on? Does anybody know of an existing workaround?
Environment:
- OpenMQ 4.3
- CentOS 5.2
- Sun JDK 1.6_05
- Spring 2.5.5
- Camel 1.3.0
I also looked at the code and found only one location where the error message is used. I still need to figure our how I can get the conditional expression to evaluate to false.
share/java/com/sun/messaging/jmq/jmsserver/core/Destination.java
1395 if (!DestType.isAdmin(type) && !canAutoCreate(DestType.isQueue(type),type) && !BrokerMonitor.isInternal(destination)) {
1396 throw new BrokerException(
1397 Globals.getBrokerResources().getKString(
1398 BrokerResources.W_DST_NO_AUTOCREATE,
1399 getName()),
1400 BrokerResources.W_DST_NO_AUTOCREATE,
1401 (Throwable) null,
1402 Status.FORBIDDEN);
-bash-3.2$ /tmp/openmq-4.3/mq/bin/imqcmd query bkr -t q -n MYQUEUE -u admin
Password: admin
Querying the broker specified by:
Host Primary Port
localhost 7676
Version 4.3
Instance Name imqbroker
Broker ID
Primary Port 7676
Broker is Embedded false
Instance Configuration/Data Root Directory /tmp/openmq-4.3-data/var/mq
Current Number of Messages in System 202
Current Total Message Bytes in System 317483
Current Number of Messages in Dead Message Queue 201
Current Total Message Bytes in Dead Message Queue 316444
Log Dead Messages true
Truncate Message Body in Dead Message Queue false
Max Number of Messages in System unlimited (-1)
Max Total Message Bytes in System unlimited (-1)
Max Message Size 70m
Auto Create Queues true
Auto Create Topics true
Auto Created Queue Max Number of Active Consumers unlimited (-1)
Auto Created Queue Max Number of Backup Consumers 0
Cluster ID
Cluster is Highly Available false
Cluster Broker List (active) mq://192.168.1.123:7676/
Cluster Broker List (configured)
Cluster Master Broker
Cluster URL
Log Level DEBUG
Log Rollover Interval (seconds) 604800
Log Rollover Size (bytes) 268435456
Successfully queried the broker.
I also tried versions 4.4 and 4.2 and received the same behavior :(

The application is inside an app server but we're not using a resource adapter as we're using Spring and Camel to hide the JMS details. Spring (JMSComponent) manages the connection directly. (We current don't have any JMS connection pooling as well.)
<bean id="jmsTransactionManager" class="org.springframework.jms.connection.JmsTransactionManager">
<property name="connectionFactory" ref="jmsConnectionFactory" />
</bean>
<bean id="jmsConnectionFactory" class="com.norvax.framework.jms.OpenMQConnectionFactory">
<property name="openmqBrokerConfiguration">
<props>
<prop key="imqBrokerHostName">$remoting{openmq.hostName}</prop>
<prop key="imqBrokerHostPort">$remoting{openmq.hostPort}</prop>
<prop key="imqReconnect">true</prop>
</props>
</property>
</bean>
<bean id="jms" class="org.apache.camel.component.jms.JmsComponent">
<property name="connectionFactory" ref="jmsConnectionFactory" />
</bean>
I'm going to write a very basic producer using Spring without using Camel and see if I'll get the same behavior. I'd like to see if the way Camel uses JMS is what's making OpenMQ broker to deny creation of temporary queues.
Thanks,
Jeff

I start my mac book pro and the screen goes white with an apple in the middle

I start my mac book pro and the screen goes white with an apple in the middle. Starts like charging but then it turns
off again

Reinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

HT1199 My mac won't boot up it goes to a apple sign then the spin thing then gives me a error msg on a 10.5.8 imac what do I do?

Plz help
My mac won't boot up it goes to a apple sign then the spin thing then gives me a error msg on a 10.5.8 imac what do I do?

Hi LIsa,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Or..
Tough without the Install Disk problems, but try fsck...
To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
1. Start up your computer in single-user mode to reach the command line. Hold CMD+s keys down at bootup.
Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
2. At the command-line prompt, type /sbin/fsck -fy
(SPACE between fsck AND -fy important)
3. Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found:
The volume (name_of_volume) appears to be OK
If fsck found issues and has altered, repaired, or fixed anything, it will display this message:
***** FILE SYSTEM WAS MODIFIED *****
Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
4. When fsck reports that your volume is OK, type reboot at the prompt and then press Return.

My macbook pro's screen constantly goes dim. I have set the energy saver settings for battery to 7 mins but it goes dim if the period of inactivity is less than 7 mins. Please help. MBP 13" OSX 10.6.8 (2011)

My macbook pro's screen constantly goes dim. I have set the energy saver settings for battery to 7 mins but it goes dim even if the period of inactivity is less than 7 mins. Please help. MBP 13" OSX 10.6.8 (2011)

Doesn't sound like it. It sounds like you're being logged-off.
Does your Mac go through the complete Restart cycle -- black screen, gray and/or blue screen momentarily, startup chime, etc?
If you're not sure, do a Restart just to watch the process; the next time the problem occurs, see if it's the same.
You need to know which it is, as these will have very different causes, and different places to look for a solution.

Nexus 7k is going to be restarted if excute the claer mac address command

Similar Messages

Maybe you are looking for