NF-e: Maintain Connected Authority Systems - Já existe uma entrada com a mesma chave
Bom dia!
Estou tendo um problema para adicionar novas entradas na SPRO - OUTBOUND -NF-e: Maintain Connected Authority Systems para configuração do layout 3.10:
Sendo assim, como devo configurar todos os estados para a SEFAZ se o sistema lógico e CNPJ são chaves da tabela /xnfe/govpar?
Com isso, não consigo executar todos os status de serviço no layout novo através do report (/XNFE/NFE_CHECK_SRV_STATUS) depois de cadastrálos na atividade NF-e: Define Service Status Request for Authority (SEFAZ,) pois durante a execução do report (/XNFE/NFE_CHECK_SRV_STATUS) além da tabela /xnfe/tcuf a tabela /xnfe/govpar também é verificada.
Grato.,
Bom dia Luís,
Exatamente! De fato o que ocorreu foi uma confusão, pois na versão anterior era possível enviar o status de serviço mesmo se você não possuísse uma filial para o estado em questão. Quando fui fazer a migração do cliente todos os estados estavam configurados para emitir status de serviço, porém não há necessidade de enviar o status de serviço para um estado visto que você não possui uma filial para emissão de Nota no mesmo.
Abs.,
Similar Messages
-
Dúvida - NF-e: Maintain Connected Authority Systems - layout 3.10
Boa noite!
Estou realizando o customize da SPRO, porém notei que só posso inserir a seguinte entrada para um mesmo CNPJ:
Ou seja, quando tento colocar os demais estados o erro de chave duplicada é retornado devido aos campos logical system e Company's Own CNPJ. Dessa maneira, quando executo o novo programa de status de serviço (/XNFE/NFE_CHECK_SRV_STATUS) relalizando o debug noto que existe uma verificação durante a execução da função (/XNFE/SRVSTA_READ_CUST) na qual, por mais que eu tenha cadastro todos os cUF na spro que ficam registrados na tabela (/xnfe/tcuf) o status de serviço acaba sendo executado apenas para o que existe na tabela (/xnfe/govpar) alimentada pela configuração da NF-e: Maintain Connected Authority Systems da imagem que enviei posteriormente. Sendo assim só é executado o status de serviço para SP e não para todas as cUF que estão na atividade NF-e: Define Service Status Request for Authority (SEFAZ). Abaixo segue trecho do código que verifiquei que realiza esse controle no debug:
SELECT * FROM /xnfe/govpar INTO TABLE lt_govpar
WHERE doctype = iv_doctype.
*--- 2. Version determination
IF lt_govpar IS NOT INITIAL.
SELECT * FROM /xnfe/xmlversdet INTO TABLE lt_xmlversdet
FOR ALL ENTRIES IN lt_govpar
WHERE doctype = iv_doctype
AND logsys = lt_govpar-logsys
AND ( cnpj = lt_govpar-cnpj
OR cnpj = ' ' )
AND messtype = iv_messtype.
*--- 3. Service status check parameter
SELECT * FROM /xnfe/tcuf INTO TABLE lt_tcuf.
LOOP AT lt_govpar ASSIGNING <ls_govpar>.
*--- Get corresponding entry from version determination
READ TABLE lt_xmlversdet WITH KEY doctype = <ls_govpar>-doctype
logsys = <ls_govpar>-logsys
cnpj = <ls_govpar>-cnpj
ASSIGNING <ls_xmlversdet>.
IF sy-subrc <> 0.
*--- If nothing is found try with blank CNPJ
READ TABLE lt_xmlversdet WITH KEY doctype = <ls_govpar>-doctype
logsys = <ls_govpar>-logsys
cnpj = ' '
ASSIGNING <ls_xmlversdet>.
ENDIF.
IF sy-subrc IS INITIAL.
*--- Get corresponding entry for service status check parameter
READ TABLE lt_tcuf WITH KEY doctype = <ls_govpar>-doctype
cuf = <ls_govpar>-cuf
ASSIGNING <ls_tcuf>.
IF sy-subrc IS INITIAL.
ls_stacheck-cuf = <ls_govpar>-cuf.
ls_stacheck-tpamb = <ls_govpar>-tpamb.
ls_stacheck-xmlvers = <ls_xmlversdet>-xmlvers.
ls_stacheck-sscperiod = <ls_tcuf>-sscperiod.
ls_stacheck-tzone = <ls_tcuf>-tzone.
ls_stacheck-respcont = <ls_tcuf>-respcont.
ls_stacheck-checkcont = <ls_tcuf>-checkcont.
APPEND ls_stacheck TO et_stacheck.
ENDIF.
ENDIF.
CLEAR: ls_stacheck.
ENDLOOP.
ENDIF.
Sendo assim, como faço para que na atividade NF-e: Maintain Connected Authority Systems eu possa inserir todos os cUF com para os quais executarei o status de serviço e posteriormente enviarei notas?
Obrigado.,Bom dia Luís,
Exatamente! De fato o que ocorreu foi uma confusão, pois na versão anterior era possível enviar o status de serviço mesmo se você não possuísse uma filial para o estado em questão. Quando fui fazer a migração do cliente todos os estados estavam configurados para emitir status de serviço, porém não há necessidade de enviar o status de serviço para um estado visto que você não possui uma filial para emissão de Nota no mesmo.
Abs., -
Sql Server 2012 Login Failed for user "NT Authority\System"
I have installed SQL Server on a new server. I have been getting the following error on each of the database in it.
Login failed for user 'NT AUTHORITY\SYSTEM'. Reason: Failed to open the explicitly specified database 'ABC'. [CLIENT: xxx.xxx.xxx.xxx]
Here is some information on the instance:
1) Default instance
2) SQL Server, Sql Server Agent, Sql Server Reporting services are running / log on using a domain service account.
3) Sql Server Browser is disabled.
4) SQL Server VSS Writer is running / log on as Local Service.
5) NT AUTHORITY\SYSTEM does exists in Login with just public server roles.
I ran a trace on login failed and I get:
ApplicationName: Microsoft Windows Script Host
and it runs every 15 minutes.
Help please?Hi,
The error was thrown when the SCOM components connected to the backend SCOM databases.
You can specify a domain account, grant it the sysadmin role and the error should be gone.
Also, see the replies in your previous thread:
http://social.technet.microsoft.com/Forums/en-US/23f6b6cb-ec41-4117-8613-26d24c948827/login-failed-for-user-username-reason-failed-to-open-the-explicitly-specified-database
Thanks.
Tracy Cai
TechNet Community Support -
Re-connect sorce system in RSA1
Dear BW experts
re-connect sorce system that existent in bw and don't existent in the
sorce system.
I try to re-connect ECC system to BW by the function RSAP_BIW_CONNECT
and when I try to execute the function I get NO_TSPREFIX_DEFIEND
Entry TSPREFIX for table RSBASIDOC could not be created.
I look at the table RSBASIDOC and I see that the TSPREFIX is already in
the table to another system.
If I do restore connection to the system
I get a message that said:
The connection BC is used in the LOGTST400 source system as a connection LOGDEV100 USED.
do you want to delete this connecrion in the source system?
the connection is restored after it has been deleted successfully
and I don't want to delete the LOGDEV100 connection.
there is a way to change the TSPREFIX in RSBASIDOC table?
Thanks
Royi Denissolution found:
config needs to be opened on source system ,if not, a popup tries to tell you that config needs to be opened, but it cannot because the frontend is not active on this connection. -
We set up the Data Management Gateway and created a new data source (odata to SQL via sqL user)
Did a connection test and it was successful!
Tried the URL (maybe it needs more):
https://ourdomain.hybridproxy.powerbi.com/ODataService/v1.0/odatatest
That resolves to some :8051 port address and then spits out this message:
The server encountered an error processing the request. See server logs for more details.
I checked and the data management gateway is running.
Does that 8051 port need to be opened on our firewall for this server? How can I confirm that is the issue.. I see no event on the server indicating this is the issue?
I am seeing this event:
Login failed for user 'NT AUTHORITY\SYSTEM'. Reason: Failed to open the explicitly specified database 'PowerBiTest'. [CLIENT: IP of the Server]O365,
Is this still an issue?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it! -
Error creation of JCO connection: System Already Exist
Hi Experts,
We have created the SLD connection to the ECC6.0 from the Portal 7.0.
Created one JCO connection using that SLD successfully for the Clinet 100.
Now we required to create one more JCO Connection for client200 also. But it is giving the Error that
System Already Exist.
How can we resolve this. When we create the JCO connection for one client, con't we create one more JCO connection for the same system for the differt client or not?
If so How do it?
RegardsI think you can add one more client in the existing connection. well, I am not sure about that even.
nikhil -
Maintaining connections to/ from XI system.
Hi,
plz tell me,how to Maintaining connections to/ from XI system.
with warm regards.
vikashConnection from R/3 to XI
You have to two create RFC destination (TCP/IP) LCRSAPRFC and SAPSLDAPI for the SLD connection.
Program ID will be
LCRSAPRFC_<PID>or<XID> depends on your XI Box for RFC destination LCRSAPRFC
and same for the next connection (SAPSLDAPI_<PID> or <XID>
Note: make sure you give the gateway host and gateway service of the XI sytem but not the R/3 sytem. The details you can find with TX-SMGW on the xi system.
Before testing these connections login to the VA tool on the XI system and create these destination under JCO RFC Provider and under repository make sure that you give the host name of the R/3 system as you have created the RFC connection on the R/3 server.
once these connections are successful, go with the TX-SLDAPICUST on the R/3 system and there the R/3 system should point to the XI SLD.
Go to RZ70 and run the data suppliers and register the R/3 system in the SLD
USE TCode SLDAPICUST and maintain the necessary information like Host, Port.
for RFC LCRSAPRFC and SAPSLDAPI...you hve to create this as TCPIP with PID...to find the appropriate PID for these...try to find out from the basis what they have maintained in the visual admin
login to Visual admin...click on servers....JCO connections there what is the name of the LCRSAPRFC and SAPSLDAPI use the same name...if you are not sure of this ask the basis to give exact name
once you do this run the TCODE SLDCHECK it shouls login to SLD...check SPROXY then
If you are doing the IDOC communication from R/3 to XI means
Ale Settings
Steps
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
In Transaction SALE
Define and Assign the logical system name.
IDOCXIFile Scenario
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
Note: reward points if solution found helpfull
Regards
Chandrakanth.k -
Error: Source system already exists. Message no. RSAR201. Points rewarded.
Error: Source system already exists. Message no. RSAR201
We have installed a BI 7.0 system recently and I am setting up the server to connect to SAP ERP.
In TA SM59 a connection to the SAP ERP has been established. The Remote Logon is OK, (meaning clicking it nothing happens). The Connection Test is OK.
According to the Best Practices paper: B84: BI Connectivity (B84)
http://help.sap.com/bp_biv170/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
I have done the following:
In TA RSA1
1. Choose Modeling.
2. Choose Source Systems.
3. Select SAP in the window on the right.
4. Choose the Context menu (right mouse click).
5. Choose Create.
6. Make the following entries:
Available destination: (The above tested connection)
Background user in source system: RFCUSER (I created the user in ERP according to step 1.4 in B84)
Password for source system: *****
Background user in BI: RFCUSER (I created the user in BI according to step 1.4 in B84)
Password for BI user: *****
8. In the dialog box Please log on as an administrator in the following screen choose Continue.
9. Log on to the Source System with your administrator user. Choose the correct client.
10. On the dialog box New Source System Connection choose Continue.
THEN I GET THE ERROR:
Source system already exists.
Message no. RSAR201
What is wrong? I cannot locate any SAP notes to help on this problem.
Best regards,
Carsten PoldHello Carsten,
just some guessing at this point...
a)
Is the connection really new? For example, was there another system connected to that ERP, maybe with the same logical name? Or was any of the two systems copied from another system?
b)
Authorisations issues in this process may result in strange error messages. Make sure that the admin user in step 9 really has SAP_ALL. There are a lot of complex activities that this user must be able to do (ALE management, RFC access etc.). To exclude issues with the RFCUSER users: If possible, give them SAP_ALL, too. Of course only temporarily for testing.
c)
I normally don't use existing RFC destinations. Usually, I let the system create those, too. So maybe it makes a difference if you remove the RFC destinations on both sides and try again. In that case, you will of course have to provide the RFC details when creating the source system connection...
I hope this brings you forward a little...
Regards,
Christian! -
Error: : connection pool does not exist
I am getting a Connection pool does not exitst Error on starting Web
Logic. When i Checked on http://localhost:8002/console ->
jdbc-connectionpools
Productionpool(name of the connection pool), I checked the testing tab
it shows it is unavailable while it shows Deployed=true on the
Configuraton tab.
It is failing on my system while its working on other systems. I am
using weblogicSP4_814
Can u pls provide me some solution for this error.
<Jun 16, 2006 4:33:11 PM IST> <Warning> <JDBC> <BEA-001129> <Received
exception while creating connection for pool "noti
fJMSJDBCConnPool": access denied (java.util.PropertyPermission
oracle.net.wallet_location read)>
<Jun 16, 2006 4:33:12 PM IST> <Warning> <JDBC> <BEA-001129> <Received
exception while creating connection for pool "noti
fJMSJDBCConnPool": access denied (java.util.PropertyPermission
oracle.net.wallet_location read)>
<Jun 16, 2006 4:33:13 PM IST> <Error> <JDBC> <BEA-001150> <Connection
Pool "notifJMSJDBCConnPool" deployment failed with
the following error: 0:Could not create pool connection. The DBMS
driver exception was: access denied (java.util.Proper
tyPermission oracle.net.wallet_location read).>
<Jun 16, 2006 4:33:13 PM IST> <Warning> <JDBC> <BEA-001129> <Received
exception while creating connection for pool "prod
uctionPool": access denied (java.util.PropertyPermission
oracle.net.wallet_location read)>
<Jun 16, 2006 4:33:14 PM IST> <Warning> <JDBC> <BEA-001129> <Received
exception while creating connection for pool "prod
uctionPool": access denied (java.util.PropertyPermission
oracle.net.wallet_location read)>
<Jun 16, 2006 4:33:15 PM IST> <Error> <JDBC> <BEA-001150> <Connection
Pool "productionPool" deployment failed with the f
ollowing error: 0:Could not create pool connection. The DBMS driver
exception was: access denied (java.util.PropertyPerm
ission oracle.net.wallet_location read).>
<Jun 16, 2006 4:33:15 PM IST> <Error> <JDBC> <BEA-001151> <Data Source
"notifJMSJDBCConnPool" deployment failed with the
following error: DataSource(weblogic.jdbc.jts.notifJMSJDBCConnPool)
can't be created with non-existent Pool (connection
or multi) (notifJMSJDBCConnPool).>
<Jun 16, 2006 4:33:15 PM IST> <Error> <JDBC> <BEA-001151> <Data Source
"productionPool" deployment failed with the follo
wing error: DataSource(weblogic.jdbc.jts.productionPool) can't be
created with non-existent Pool (connection or multi) (
productionPool).>
<Jun 16, 2006 4:33:15 PM IST> <Alert> <JMS> <BEA-040052> <JMSServer
"NotificationJMSServer" store failed to open java.io
.IOException: JMS JDBC store, connection pool = <notifJMSJDBCConnPool>,
prefix = <notif>: connection pool does not exist
java.io.IOException: JMS JDBC store, connection pool =
<notifJMSJDBCConnPool>, prefix = <notif>: connection pool does no
t exist
at
weblogic.jms.store.JDBCIOStream.throwIOException(JDBCIOStream.java:488)
at
weblogic.jms.store.JDBCIOStream.checkPool(JDBCIOStream.java:1599)
at weblogic.jms.store.JDBCIOStream.open(JDBCIOStream.java:548)
at weblogic.jms.store.JMSStore.open(JMSStore.java:224)
at weblogic.jms.backend.BEStore.open(BEStore.java:262)
at weblogic.jms.backend.BEStore.start(BEStore.java:151)
at weblogic.jms.backend.BackEnd.openStores(BackEnd.java:1171)
at weblogic.jms.backend.BackEnd.resume(BackEnd.java:1290)
at weblogic.jms.JMSService.addJMSServer(JMSService.java:2260)
at weblogic.jms.JMSService.addDeployment(JMSService.java:2031)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentÂTarget.java:337)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymenÂtTarget.java:597)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(ÂDeploymentTarget.java:575)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeployÂmentTarget.java:241)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:3Â9)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpÂl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpÂl.java:755)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:Â734)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeÂanImpl.java:516)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
at
weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBeÂanServerImpl.java:990)
at
weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerÂImpl.java:948)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:948)
at
weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.javÂa:475)
at
weblogic.management.configuration.ServerMBean_Stub.updateDeployments(ServerÂMBean_Stub.java:7731)
at
weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployments(SlavÂeDeployer.java:1321)
at
weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:33Â9)
at
weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeplÂoymentManagerServerLifeCycleImpl.j
ava:229)
at
weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:136)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:965)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:360)
at weblogic.Server.main(Server.java:32)
<Jun 16, 2006 4:33:15 PM IST> <Error> <JMS> <BEA-040123> <Failed to
start JMS Server "NotificationJMSServer" due to webl
ogic.jms.common.JMSException: JMS can not open store notifJMSJDBCStore.
weblogic.jms.common.JMSException: JMS can not open store
notifJMSJDBCStore
at weblogic.jms.backend.BEStore.start(BEStore.java:163)
at weblogic.jms.backend.BackEnd.openStores(BackEnd.java:1171)
at weblogic.jms.backend.BackEnd.resume(BackEnd.java:1290)
at weblogic.jms.JMSService.addJMSServer(JMSService.java:2260)
at weblogic.jms.JMSService.addDeployment(JMSService.java:2031)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentÂTarget.java:337)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymenÂtTarget.java:597)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(ÂDeploymentTarget.java:575)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeployÂmentTarget.java:241)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:3Â9)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpÂl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpÂl.java:755)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:Â734)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeÂanImpl.java:516)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
at
weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBeÂanServerImpl.java:990)
at
weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerÂImpl.java:948)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:948)
at
weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.javÂa:475)
at
weblogic.management.configuration.ServerMBean_Stub.updateDeployments(ServerÂMBean_Stub.java:7731)
at
weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployments(SlavÂeDeployer.java:1321)
at
weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:33Â9)
at
weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeplÂoymentManagerServerLifeCycleImpl.j
ava:229)
at
weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:136)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:965)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:360)
at weblogic.Server.main(Server.java:32)
Caused by: java.io.IOException: JMS JDBC store, connection pool =
<notifJMSJDBCConnPool>, prefix = <notif>: connection p
ool does not exist
at
weblogic.jms.store.JDBCIOStream.throwIOException(JDBCIOStream.java:488)
at
weblogic.jms.store.JDBCIOStream.checkPool(JDBCIOStream.java:1599)
at weblogic.jms.store.JDBCIOStream.open(JDBCIOStream.java:548)
at weblogic.jms.store.JMSStore.open(JMSStore.java:224)
at weblogic.jms.backend.BEStore.open(BEStore.java:262)
at weblogic.jms.backend.BEStore.start(BEStore.java:151)
... 29 more
<Jun 16, 2006 4:33:32 PM IST> <Warning> <HTTP> <BEA-101248>
<[D:\Build\autodeploys\i2\weblogic_home\config\vendavo\.\app
lications\.wlnotdelete\wlap12518\vendavo.war]: Deployment descriptor
"web.xml" is malformed. Check against the DTD: org.
xml.sax.SAXParseException: The content of element type "web-app" must
match "(icon?,display-name?,description?,distribut
able?,context-param*,filter*,filter-mapping*,listener*,servlet*,servlet-mapÂping*,session-config?,mime-mapping*,welcome-f
ile-list?,error-page*,taglib*,resource-env-ref*,resource-ref*,security-consÂtraint*,login-config?,security-role*,env-entr
y*,ejb-ref*,ejb-local-ref*)". (line 252, column 11).>
java.lang.ExceptionInInitializerError
at com.vendavo.cl.ClassHelper.<clinit>(ClassHelper.java:28)
at
com.vendavo.cl.io.ResourceHelper.addLoader(ResourceHelper.java:121)
at
com.vendavo.cl.io.ResourceHelper.<init>(ResourceHelper.java:39)
at
com.vendavo.cl.io.ResourceHelper.<clinit>(ResourceHelper.java:29)
at
com.vendavo.platform.action.StartupAction.init(StartupAction.java:75)
at
com.vendavo.platform.action.StartupAction.contextInitialized(StartupAction.Âjava:311)
at
weblogic.servlet.internal.WebAppServletContext$FireContextListenerAction.ruÂn(WebAppServletContext.java:7044)
at
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubjeÂct.java:321)
at
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at
weblogic.servlet.internal.WebAppServletContext.notifyCreated(WebAppServletCÂontext.java:1753)
at
weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServlÂetContext.java:3352)
at
weblogic.servlet.internal.HttpServer.preloadResources(HttpServer.java:727)
at
weblogic.servlet.internal.WebService.preloadResources(WebService.java:486)
at
weblogic.servlet.internal.ServletInitService.resume(ServletInitService.javaÂ:30)
at
weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:136)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:965)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:360)
at weblogic.Server.main(Server.java:32)
Caused by: java.security.AccessControlException: access denied
(java.util.PropertyPermission * read,write)
at
java.security.AccessControlContext.checkPermission(AccessControlContext.javÂa:269)
at
java.security.AccessController.checkPermission(AccessController.java:401)
at
java.lang.SecurityManager.checkPermission(SecurityManager.java:524)
at
java.lang.SecurityManager.checkPropertiesAccess(SecurityManager.java:1243)
at java.lang.System.getProperties(System.java:501)
at
com.vendavo.cl.property.AppProperties.loadSystemProperties(AppProperties.jaÂva:411)
at
com.vendavo.cl.property.AppProperties.loadBasics(AppProperties.java:326)
at
com.vendavo.cl.property.AppProperties.getInstance(AppProperties.java:160)
at com.vendavo.cl.log.VLog.loadAppProperties(VLog.java:134)
at com.vendavo.cl.log.VLog.createDefaultSetup(VLog.java:94)
at com.vendavo.cl.log.VLog.<clinit>(VLog.java:66)
... 18 more
<Jun 16, 2006 4:33:34 PM IST> <Warning> <HTTP> <BEA-101162> <User
defined listener com.vendavo.platform.action.StartupAc
tion failed: java.lang.NoClassDefFoundError.>
<Jun 16, 2006 4:33:34 PM IST> <Warning> <HTTP> <BEA-101162> <User
defined listener com.vendavo.platform.action.StartupAc
tion failed: java.lang.NoClassDefFoundError.>
<Jun 16, 2006 4:33:34 PM IST> <Error> <HTTP> <BEA-101216> <Servlet:
"AdminServlet" failed to preload on startup in Web a
pplication: "soap".
Thanks in Advance,
Ketan.B.Parekhketan parekh wrote:
I am getting a Connection pool does not exitst Error on starting Web
Logic. When i Checked on http://localhost:8002/console ->
jdbc-connectionpools
Productionpool(name of the connection pool), I checked the testing tab
it shows it is unavailable while it shows Deployed=true on the
Configuraton tab.
It is failing on my system while its working on other systems. I am
using weblogicSP4_814
Can u pls provide me some solution for this error. Hi. Would you run the utils.dbping utility, and then
give it the arguments to connect to the same DBMS with
the same user as your pool? Show me the exception you
get if it fails:
C:\bea81sp5\weblogic81>java utils.dbping
Usage: java utils.dbping DB2B [-d dynamicSections] USER PASS HOST:PORT/DBNAME
or java utils.dbping JCONN2 USER PASS HOST:PORT/DBNAME
or java utils.dbping JCONNECT USER PASS HOST:PORT/DBNAME
or java utils.dbping INFORMIXB USER PASS HOST:PORT/DBNAME/INFORMIXSERVER
or java utils.dbping MSSQLSERVER4 USER PASS HOST:PORT/DBNAME
or java utils.dbping MSSQLSERVER4 USER PASS [DBNAME@]HOST[:PORT]
or java utils.dbping MSSQLSERVERB USER PASS HOST:PORT/DBNAME
or java utils.dbping ORACLE USER PASS DBNAME
or java utils.dbping ORACLEB USER PASS HOST:PORT/DBNAME
or java utils.dbping ORACLE_THIN USER PASS HOST:PORT:DBNAME
or java utils.dbping POINTBASE USER PASS HOST[:PORT]/DBNAME
or java utils.dbping SYBASEB USER PASS HOST:PORT/DBNAME
>
>
<Jun 16, 2006 4:33:11 PM IST> <Warning> <JDBC> <BEA-001129> <Received
exception while creating connection for pool "noti
fJMSJDBCConnPool": access denied (java.util.PropertyPermission
oracle.net.wallet_location read)>
<Jun 16, 2006 4:33:12 PM IST> <Warning> <JDBC> <BEA-001129> <Received
exception while creating connection for pool "noti
fJMSJDBCConnPool": access denied (java.util.PropertyPermission
oracle.net.wallet_location read)>
<Jun 16, 2006 4:33:13 PM IST> <Error> <JDBC> <BEA-001150> <Connection
Pool "notifJMSJDBCConnPool" deployment failed with
the following error: 0:Could not create pool connection. The DBMS
driver exception was: access denied (java.util.Proper
tyPermission oracle.net.wallet_location read).>
<Jun 16, 2006 4:33:13 PM IST> <Warning> <JDBC> <BEA-001129> <Received
exception while creating connection for pool "prod
uctionPool": access denied (java.util.PropertyPermission
oracle.net.wallet_location read)>
<Jun 16, 2006 4:33:14 PM IST> <Warning> <JDBC> <BEA-001129> <Received
exception while creating connection for pool "prod
uctionPool": access denied (java.util.PropertyPermission
oracle.net.wallet_location read)>
<Jun 16, 2006 4:33:15 PM IST> <Error> <JDBC> <BEA-001150> <Connection
Pool "productionPool" deployment failed with the f
ollowing error: 0:Could not create pool connection. The DBMS driver
exception was: access denied (java.util.PropertyPerm
ission oracle.net.wallet_location read).>
<Jun 16, 2006 4:33:15 PM IST> <Error> <JDBC> <BEA-001151> <Data Source
"notifJMSJDBCConnPool" deployment failed with the
following error: DataSource(weblogic.jdbc.jts.notifJMSJDBCConnPool)
can't be created with non-existent Pool (connection
or multi) (notifJMSJDBCConnPool).>
<Jun 16, 2006 4:33:15 PM IST> <Error> <JDBC> <BEA-001151> <Data Source
"productionPool" deployment failed with the follo
wing error: DataSource(weblogic.jdbc.jts.productionPool) can't be
created with non-existent Pool (connection or multi) (
productionPool).>
<Jun 16, 2006 4:33:15 PM IST> <Alert> <JMS> <BEA-040052> <JMSServer
"NotificationJMSServer" store failed to open java.io
.IOException: JMS JDBC store, connection pool = <notifJMSJDBCConnPool>,
prefix = <notif>: connection pool does not exist
java.io.IOException: JMS JDBC store, connection pool =
<notifJMSJDBCConnPool>, prefix = <notif>: connection pool does no
t exist
at
weblogic.jms.store.JDBCIOStream.throwIOException(JDBCIOStream.java:488)
at
weblogic.jms.store.JDBCIOStream.checkPool(JDBCIOStream.java:1599)
at weblogic.jms.store.JDBCIOStream.open(JDBCIOStream.java:548)
at weblogic.jms.store.JMSStore.open(JMSStore.java:224)
at weblogic.jms.backend.BEStore.open(BEStore.java:262)
at weblogic.jms.backend.BEStore.start(BEStore.java:151)
at weblogic.jms.backend.BackEnd.openStores(BackEnd.java:1171)
at weblogic.jms.backend.BackEnd.resume(BackEnd.java:1290)
at weblogic.jms.JMSService.addJMSServer(JMSService.java:2260)
at weblogic.jms.JMSService.addDeployment(JMSService.java:2031)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Deployment??Target.java:337)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Deploymen??tTarget.java:597)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(??DeploymentTarget.java:575)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(Deploy??mentTarget.java:241)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:3??9)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImp??l.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImp??l.java:755)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:??734)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBe??anImpl.java:516)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
at
weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBe??anServerImpl.java:990)
at
weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServer??Impl.java:948)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:948)
at
weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.jav??a:475)
at
weblogic.management.configuration.ServerMBean_Stub.updateDeployments(Server??MBean_Stub.java:7731)
at
weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployments(Slav??eDeployer.java:1321)
at
weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:33??9)
at
weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(Depl??oymentManagerServerLifeCycleImpl.j
ava:229)
at
weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:136)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:965)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:360)
at weblogic.Server.main(Server.java:32)
<Jun 16, 2006 4:33:15 PM IST> <Error> <JMS> <BEA-040123> <Failed to
start JMS Server "NotificationJMSServer" due to webl
ogic.jms.common.JMSException: JMS can not open store notifJMSJDBCStore.
weblogic.jms.common.JMSException: JMS can not open store
notifJMSJDBCStore
at weblogic.jms.backend.BEStore.start(BEStore.java:163)
at weblogic.jms.backend.BackEnd.openStores(BackEnd.java:1171)
at weblogic.jms.backend.BackEnd.resume(BackEnd.java:1290)
at weblogic.jms.JMSService.addJMSServer(JMSService.java:2260)
at weblogic.jms.JMSService.addDeployment(JMSService.java:2031)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Deployment??Target.java:337)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Deploymen??tTarget.java:597)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(??DeploymentTarget.java:575)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(Deploy??mentTarget.java:241)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:3??9)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImp??l.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImp??l.java:755)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:??734)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBe??anImpl.java:516)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
at
weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBe??anServerImpl.java:990)
at
weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServer??Impl.java:948)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:948)
at
weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.jav??a:475)
at
weblogic.management.configuration.ServerMBean_Stub.updateDeployments(Server??MBean_Stub.java:7731)
at
weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployments(Slav??eDeployer.java:1321)
at
weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:33??9)
at
weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(Depl??oymentManagerServerLifeCycleImpl.j
ava:229)
at
weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:136)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:965)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:360)
at weblogic.Server.main(Server.java:32)
Caused by: java.io.IOException: JMS JDBC store, connection pool =
<notifJMSJDBCConnPool>, prefix = <notif>: connection p
ool does not exist
at
weblogic.jms.store.JDBCIOStream.throwIOException(JDBCIOStream.java:488)
at
weblogic.jms.store.JDBCIOStream.checkPool(JDBCIOStream.java:1599)
at weblogic.jms.store.JDBCIOStream.open(JDBCIOStream.java:548)
at weblogic.jms.store.JMSStore.open(JMSStore.java:224)
at weblogic.jms.backend.BEStore.open(BEStore.java:262)
at weblogic.jms.backend.BEStore.start(BEStore.java:151)
... 29 more
<Jun 16, 2006 4:33:32 PM IST> <Warning> <HTTP> <BEA-101248>
<[D:\Build\autodeploys\i2\weblogic_home\config\vendavo\.\app
lications\.wlnotdelete\wlap12518\vendavo.war]: Deployment descriptor
"web.xml" is malformed. Check against the DTD: org.
xml.sax.SAXParseException: The content of element type "web-app" must
match "(icon?,display-name?,description?,distribut
able?,context-param*,filter*,filter-mapping*,listener*,servlet*,servlet-map??ping*,session-config?,mime-mapping*,welcome-f
ile-list?,error-page*,taglib*,resource-env-ref*,resource-ref*,security-cons??traint*,login-config?,security-role*,env-entr
y*,ejb-ref*,ejb-local-ref*)". (line 252, column 11).>
java.lang.ExceptionInInitializerError
at com.vendavo.cl.ClassHelper.<clinit>(ClassHelper.java:28)
at
com.vendavo.cl.io.ResourceHelper.addLoader(ResourceHelper.java:121)
at
com.vendavo.cl.io.ResourceHelper.<init>(ResourceHelper.java:39)
at
com.vendavo.cl.io.ResourceHelper.<clinit>(ResourceHelper.java:29)
at
com.vendavo.platform.action.StartupAction.init(StartupAction.java:75)
at
com.vendavo.platform.action.StartupAction.contextInitialized(StartupAction.??java:311)
at
weblogic.servlet.internal.WebAppServletContext$FireContextListenerAction.ru??n(WebAppServletContext.java:7044)
at
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubje??ct.java:321)
at
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at
weblogic.servlet.internal.WebAppServletContext.notifyCreated(WebAppServletC??ontext.java:1753)
at
weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServl??etContext.java:3352)
at
weblogic.servlet.internal.HttpServer.preloadResources(HttpServer.java:727)
at
weblogic.servlet.internal.WebService.preloadResources(WebService.java:486)
at
weblogic.servlet.internal.ServletInitService.resume(ServletInitService.java??:30)
at
weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:136)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:965)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:360)
at weblogic.Server.main(Server.java:32)
Caused by: java.security.AccessControlException: access denied
(java.util.PropertyPermission * read,write)
at
java.security.AccessControlContext.checkPermission(AccessControlContext.jav??a:269)
at
java.security.AccessController.checkPermission(AccessController.java:401)
at
java.lang.SecurityManager.checkPermission(SecurityManager.java:524)
at
java.lang.SecurityManager.checkPropertiesAccess(SecurityManager.java:1243)
at java.lang.System.getProperties(System.java:501)
at
com.vendavo.cl.property.AppProperties.loadSystemProperties(AppProperties.ja??va:411)
at
com.vendavo.cl.property.AppProperties.loadBasics(AppProperties.java:326)
at
com.vendavo.cl.property.AppProperties.getInstance(AppProperties.java:160)
at com.vendavo.cl.log.VLog.loadAppProperties(VLog.java:134)
at com.vendavo.cl.log.VLog.createDefaultSetup(VLog.java:94)
at com.vendavo.cl.log.VLog.<clinit>(VLog.java:66)
... 18 more
<Jun 16, 2006 4:33:34 PM IST> <Warning> <HTTP> <BEA-101162> <User
defined listener com.vendavo.platform.action.StartupAc
tion failed: java.lang.NoClassDefFoundError.>
<Jun 16, 2006 4:33:34 PM IST> <Warning> <HTTP> <BEA-101162> <User
defined listener com.vendavo.platform.action.StartupAc
tion failed: java.lang.NoClassDefFoundError.>
<Jun 16, 2006 4:33:34 PM IST> <Error> <HTTP> <BEA-101216> <Servlet:
"AdminServlet" failed to preload on startup in Web a
pplication: "soap".
Thanks in Advance,
Ketan.B.Parekh -
Insufficient system resources exist to complete the requested service
[I did intend to start this post with a screenshot of the above error when I initiate the transfer from Windows Explorer, but apparently 'Body text cannot contain images or links until we are able to verify your account.' so I will just have to do some typing,
viz the error dialog says:
'An unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to search for help with this problem.
Error 0x800705AA: Insufficient system resources exist to complete the requested service.'
I get this error pretty much 100% of the time from one particular PC when trying to copy a folder of 10 2GB files to a server with both mirror and parity storage spaces.
I recently purchased a Thecus W5000 running Windows Storage Server 2012 R2 Essentials. Absent any guidance either way I decided to set up a storage pool across the three 3TB WD Red drives that I have installed in it and to allocate 1.5TB of that space to a
mirror storage space and the remainder to a parity storage space. Having read some faily dire things about storage spaces, but wanting the resilience provided by those two types of storage space, I decided to run some benchmarking tests before finalising anything.
To that end I only went as far through the Essentials setup as creating a handful of user accounts before setting up the storage spaces and sharing both of them, with all authenticated users permitted full control. My benchmarking consists of a Take Command
batch file timing three large directory copies - one with 10 2GB files, one with 10240 10K files and another with a multi-level directory with a variety of files of differing sizes. The first two are completely artificial and the latter is a real world example
but all are roughly 20GB total size.
To test various aspects of this I copied the three structures to and then from a partition created on the internal disk (the W5000 has a 500GB SSHD) and to the two storage space partitions. I also created a version of the batch file for use internally which
did something similar between the internal disk and the two storage space partitions, and another as a control that tested the same process between the two Windows PCs. The internal test ran to successful completion, as did the PC to PC copy and the external
one from my Windows 8.1 64-bit system (i5 3570K, 16GB RAM, 1TB HD) but when I ran it from my Windows 7 Pro 64-bit gaming rig (i7 2600K, 8GB RAM, 1TB HD) I got a number of failures with this error from Take Command:
TCC: (Sys) C:\Program Files\bat\thecus_test_pass.btm [31] Insufficient system resources exist to complete the requested service.
(where line 31 of that batch file is a copy command from local D: to the parity space on the Thecus).
The error occurs only when copying large files (the 2GB ones already mentioned but some of those in the real world structure that are about 750MB in size) from the Win7 system to the Thecus and only when doing so to the storage space volumes - ie. copying to
the internal disk works fine, copying from all volumes works fine, copying internally within the Thecus works fine, copying between the Win8 and Win7 machines works fine and initiating the copy as a pull from the server between the same two disks also works
fine. One aspect of this that surprised me somewhat was just how quickly the copy fails when initiated from Windows Explorer - checking out the details section of the copy dialog I see roughly ten seconds of setting up and then within five seconds after the
first file transfer is shown as starting the error dialog pops up (as per the image no longer at the top of this post).
There are no entries in the event log on either machine related to this error and I've had the System Information window of the Sysinternals Process Explorer up and running on both machines whilst testing this, and it shows nothing surprising on either side.
I've also run with an xperf base active and I can't see anything pertinent in the output from either system.
Frankly, I am at a loss and have no idea what other troubleshooting steps I should try. The vast majority of the existing advice for this error message seems to relate to Windows 2003 and memory pools - which both the fact that this works from one PC but not
the other and the SysInfo/xperf output seems to suggest is not the issue. The other thing I've seen mentioned is IRPStackSize, but again if that was the problem I would expect the failure to occur where ever I initiated the large file transfer from.Ff it works from the win 8 box, it must be in the win 7 box?
I'm going to answer this one first because much of the rest of this is not going to be pertinent to the problem at hand. I've been over and over this aspect whilst trying to think this issue through and you are right, except that it only happens when copying
files to the Thecus and only then when the target is a ReFS partition on a mirror or parity storage space. So the best I can come up with is that it is most likely an issue on the Win7 box that is triggered by something that is happening on the server side,
but even that is a bit of a stretch. This is why the lack of information from the error message bugs me so much - in order to debug a problem like this you need to know what resource has been exhausted and in which part of the software stack.
Now that may not be easy to do in a generic way, and since programmers are inherently lazy it is tempting just to return a simple error value and be done with it. However, I've been in the position of doing just that in a commercial product and ended up
having to go back and improve the error information when that particular message/code was tripped and I was expected to debug the problem! Obviously there is a significant difference between a Microsoft consumer product and a mainframe product that costs many
times as much and comes with a built in maintenance fee, but the underlying requirement is the same - somebody needs to be able to solve the problem using the information returned. In this case that simply isn't possible.
You spend your time testing file copies, where I devote most of my time to backup and restore
I don't really want to be testing file copies - the initial intention was to benchmark the different storage space and file system combinations that I was intending to use but the error whilst doing so has spiralled into a cycle of testing and tweaking that
really isn't achieving anything. My primary reason for having a NAS at all has always been backup. My current strategy for the two boxes participating in this testing involves having a local drive/partition to hold backups, running a daily incremental file
copy to that partition which is then immediately copied to a NAS and backing that up with a regular (needs to be at least once per month to be totally secure) full image copy of the local disks that is also copied to the NAS afterwards (hence my fascination
with copying large files).
There is a weakness in that strategy because I've never been very good at performing that full image backup regularly enough, so one of the reasons for buying the W5000 was the possibility of making those backups automatic and driven from the server end.
However, that takes the local backup drives out of the equation and leaves me with the need to backup the NAS, which I don't do with my existing unit because there are (nearly) always copies held elsewhere.
The other reasons for going with the Thecus were a desire to backup the other machines in the household - I've always dreaded a hard drive failure on my wife's laptop but getting her to perform any kind of housekeeping is nigh on impossible and also to provide
a file server capability protected by a single set of userids (the existing NAS data is open to all household members). So my goal is backup and restore too ;)
I meant a different nic on the beast (win 7)
I should have realised that but obviously wasn't thinking straight. I don't have a spare gigabit NIC to hand (although perhaps even a megabit one might provide an interesting data point) although there is such a card in one of my other (less used) PCs that
I could cannibalise for testing purposes. Another project for the coming weekend methinks.
put some limits on it to keep the lawyers happy. 2gb ram, OS loaded on a drive, limit the # of Hard Drives
That statement got me thinking, because I've never been able to find a definition anywhere of what the restrictions are with WSS 2012 R2 Essential - if I bring up the software license terms on the box itself they are for 2012 Standard!?- and wonder whether
they'd stop me doing things like adding RAM or changing the processor.
Even my buddies at wegotserved do not seem to have done any hands on reviews and they get "everything."
The cynic in me wonders whether that is because Thecus know that they've just shovelled this onto a handful of existing boxes that barely meet the spec. and which simply aren't up to snuff as anything other than a box full of disks. The Thecus boxes
look like good value because they include the server OS (the unit cost me roughly 50% more than I could buy Windows Server 2012 R2 Essentials for) but if you can't realise that value then they are just an expensive NAS.
if perhaps the algorithms in the Seagate SSHD do not know ReFS?
I haven't put a ReFS partition on the SSHD, only on the three 3TB WD Reds.
I will ask my contacts at MS to take a look at this thread, but they stay so busy with v.next I don't know if they will spend many cycles on it
Perhaps you could ask them if the next version of the OS could do a better job of identifying which resources have been exhausted, by what part of the stack and where in the maze of connectivity that makes up a modern computing environment?? {gd&r}
Cheers, Steve -
The connection pool does not exist?
Can somebody tell what is happening? For some reason the Sun Java Application Server 8 seems to think that there is no connection pool. For a moment everything worked. I did not change the configuration but now I get this message (if I open the admin console and ping the Connection Pool its there). Here is a part of the server.log file:
[#|2006-05-06T19:12:54.453+0300|WARNING|sun-appserver-pe8.1_02|javax.enterprise|_ThreadID=10;|UTIL5047: Connection Pool does not exist: [DB2 yhteysConnectionPool]|#]
[#|2006-05-06T19:12:54.453+0300|WARNING|sun-appserver-pe8.1_02|javax.enterprise|_ThreadID=10;|UTIL5048: Error Loading Jdbc Resource: [jdbc/aarre]|#]
[#|2006-05-06T19:12:54.453+0300|INFO|sun-appserver-pe8.1_02|javax.enterprise|_ThreadID=10;|Error loading Jdbc Resource:jdbc/aarre. skipping...|#]
[#|2006-05-06T19:12:55.031+0300|WARNING|sun-appserver-pe8.1_02|javax.enterprise.system.core|_ThreadID=10;|Exception occurred while satisfying optional package dependencies : {0}
java.lang.NullPointerException
at com.sun.enterprise.deployment.backend.OptionalPkgDependency.satisfyOptionalPackageDependencies(OptionalPkgDependency.java:183)
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:270)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:591)
at com.sun.enterprise.server.ApplicationServer.onInitialization(ApplicationServer.java:237)
at com.sun.enterprise.server.PEMain.run(PEMain.java:284)
at com.sun.enterprise.server.PEMain.main(PEMain.java:220)
|#]Hi,
I'm experiencing the same problem.
Did you solve the problem and if yes how ?
Thanks,
EDH -
XI 2.0: HowTo connect Bus.-Systems with different Releases to XI (RFC-Ad.)
Hi,
can anybody help me solving this problem:
I have Business-Systems connected to XI by RFC-Adapter. Everything works fine. Now I want to upgrade some of these Business-Systems to a newer Release --> RFCs are changing! (For both Releases I have separate Developing-Systems)
Does the following work?
- Creating a new Product-Version
- Creating new Software-Component-Versions for the new Product-Version
- Creating Namespaces with the same names (as in the older Software-Component-Versions)
- Tools/Release-Takeover for every Software-Component
- Connecting Develop-System of the new Release to the new Software-Components (Interface-Import of RFCs)--> in the new Software-Components only new RFCs can be uploaded.
- Business-Systems with old Release keep connected with old Product-Version. Business-Systems with new Release are connected with new Product-Version.
Does it work? Is this the best approach or are there other possibilities?
Thanks in advance,
Max.Hey
are u suppose to do an IDOC(R/3 system A)-Xi-IDOC(R/3 system B) scenario,of u have to collect IDOC's from both the R/3 systems and send it to a single file?
in any case u have to maintain separate Business system and logical system name for both R/3 systems
thanx
ahmad
Message was edited by:
Ahmad -
When i open .exe error poops Insufficient system resources exist to complete the requested service
when i try to open some exe it tells me: Insufficient system resources exist to complete the requested
service
but before it was workingHi,
According to the error message, it could be a Service running that is consuming all the memory, you may check the memory.
Diagnosing memory problems on your computer
http://windows.microsoft.com/en-us/windows7/Diagnosing-memory-problems-on-your-computer
Please aslo check the CPU and memory performance to determine which application use too much resource.
http://windows.microsoft.com/en-in/windows7/view-cpu-utilization-and-other-performance-information
It could be what a lot of posts online talk about a software hive corruption. If you have any unnecessary external device connected to the machine, you may unplug them. Also uninstall 3rd party antivirus software.
Then, please try clean boot mode and check the result:
How to perform a clean boot to troubleshoot a problem in Windows 8, Windows 7, or Windows Vista.
http://support.microsoft.com/kb/929135
Meanwhile, you can use this tool to scan your system and check if this is a virus-effected issue:
http://www.microsoft.com/security/scanner/en-us/default.aspx
If the issue did not occur before, please try to use the system restore, return to the point which did not appear the problem.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support -
Critical SMS_Executive SQL Login failed for user 'NT AUTHORITY\SYSTEM'.
I am getting sql login errors on my sms executive log that i believe is stopping me from pxe booting. I have tried finding where to enter the credentials but i cannot find it.
SMS_EXECUTIVE 4/10/2014 3:13:12 PM
2412 (0x096C)
Starting SMS_EXECUTIVE... SMS_EXECUTIVE
4/10/2014 3:13:12 PM 2412 (0x096C)
Microsoft System Center 2012 Configuration Manager v5.00 (Build 7958)
SMS_EXECUTIVE 4/10/2014 3:13:12 PM
2412 (0x096C)
Copyright (C) 2011 Microsoft Corp. SMS_EXECUTIVE
4/10/2014 3:13:12 PM 2412 (0x096C)
Running as a Win32 service. SMS_EXECUTIVE
4/10/2014 3:13:12 PM 2412 (0x096C)
Process ID: 2368 SMS_EXECUTIVE
4/10/2014 3:13:12 PM 2412 (0x096C)
Worker thread ID: 2412 SMS_EXECUTIVE
4/10/2014 3:13:12 PM 2412 (0x096C)
Certificate (0x610450) is Exportable SMS_EXECUTIVE
4/10/2014 3:13:12 PM 2412 (0x096C)
Initialize COM Security. SMS_EXECUTIVE
4/10/2014 3:13:12 PM 2412 (0x096C)
InitializeCOMSecurity: RegOpenKeyEx for appid key Succeeded.
SMS_EXECUTIVE 4/10/2014 3:13:12 PM
2412 (0x096C)
InitializeCOMSecurity: RegQueryInfoKey for appid key Succeeded.
SMS_EXECUTIVE 4/10/2014 3:13:12 PM
2412 (0x096C)
InitializeCOMSecurity: RegQueryValueEx for AccessPermission Succeeded.
SMS_EXECUTIVE 4/10/2014 3:13:12 PM
2412 (0x096C)
InitializeCOMSecurity: IsValidSecurityDescriptor() Succeeded.
SMS_EXECUTIVE 4/10/2014 3:13:12 PM
2412 (0x096C)
InitializeCOMSecurity: MakeAbsoluteSD() Succeeded.
SMS_EXECUTIVE 4/10/2014 3:13:12 PM
2412 (0x096C)
InitializeCOMSecurity: CoInitializeEx() Succeeded.
SMS_EXECUTIVE 4/10/2014 3:13:12 PM
2412 (0x096C)
InitializeCOMSecurity() Succeeded. SMS_EXECUTIVE
4/10/2014 3:13:12 PM 2412 (0x096C)
Installation directory: E:\Program Files\Microsoft Configuration Manager
SMS_EXECUTIVE 4/10/2014 3:13:12 PM
2412 (0x096C)
This server: E076SCCM SMS_EXECUTIVE
4/10/2014 3:13:12 PM 2412 (0x096C)
Site server: sccmserver.org SMS_EXECUTIVE
4/10/2014 3:13:12 PM 2412 (0x096C)
Site code: 076 SMS_EXECUTIVE
4/10/2014 3:13:12 PM 2412 (0x096C)
Site type: 1 SMS_EXECUTIVE
4/10/2014 3:13:12 PM 2412 (0x096C)
CSMSExecService::RegisterDBConnection: Register a DB connection...
SMS_EXECUTIVE 4/10/2014 3:13:12 PM
2412 (0x096C)
Initializing the status message reporting system...
SMS_EXECUTIVE 4/10/2014 3:13:12 PM
2412 (0x096C)
The path to the "Status Manager" inbox is "E:\Program Files\Microsoft Configuration Manager\inboxes\statmgr.box\statmsgs".
SMS_EXECUTIVE 4/10/2014 3:13:13 PM
2412 (0x096C)
*** [28000][18456][Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'NT AUTHORITY\SYSTEM'.
SMS_EXECUTIVE 4/10/2014 3:13:14 PM
2412 (0x096C)
*** [42000][4060][Microsoft][SQL Server Native Client 11.0][SQL Server]Cannot open database "CM_076" requested by the login. The login failed.
SMS_EXECUTIVE 4/10/2014 3:13:14 PM
2412 (0x096C)
*** [28000][18456][Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'NT AUTHORITY\SYSTEM'.
SMS_EXECUTIVE 4/10/2014 3:13:14 PM
2412 (0x096C)
*** [42000][4060][Microsoft][SQL Server Native Client 11.0][SQL Server]Cannot open database "CM_076" requested by the login. The login failed.
SMS_EXECUTIVE 4/10/2014 3:13:14 PM
2412 (0x096C)
*** Failed to connect to the SQL Server, connection type: SMS ACCESS.
SMS_EXECUTIVE 4/10/2014 3:13:14 PM
2412 (0x096C)
CSiteControlEx::GetCurrentSiteInfo: Failed to get SQL connection
SMS_EXECUTIVE 4/10/2014 3:13:14 PM
2412 (0x096C)
CSiteControlEx::GetMasterSCF:Failed to read site information from database, retry in 5 seconds ...
SMS_EXECUTIVE 4/10/2014 3:13:14 PM
2412 (0x096C)
*** [28000][18456][Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'NT AUTHORITY\SYSTEM'.
SMS_EXECUTIVE 4/10/2014 3:13:19 PM
2412 (0x096C)
*** [42000][4060][Microsoft][SQL Server Native Client 11.0][SQL Server]Cannot open database "CM_076" requested by the login. The login failed.
SMS_EXECUTIVE 4/10/2014 3:13:19 PM
2412 (0x096C)
*** [28000][18456][Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'NT AUTHORITY\SYSTEM'.
SMS_EXECUTIVE 4/10/2014 3:13:19 PM
2412 (0x096C)
*** [42000][4060][Microsoft][SQL Server Native Client 11.0][SQL Server]Cannot open database "CM_076" requested by the login. The login failed.
SMS_EXECUTIVE 4/10/2014 3:13:19 PM
2412 (0x096C)
*** Failed to connect to the SQL Server, connection type: SMS ACCESS.
SMS_EXECUTIVE 4/10/2014 3:13:19 PM
2412 (0x096C)
CSiteControlEx::GetCurrentSiteInfo: Failed to get SQL connection
SMS_EXECUTIVE 4/10/2014 3:13:19 PM
2412 (0x096C)
CSiteControlEx::GetMasterSCF:Failed to read site information from database, retry in 5 seconds ...
SMS_EXECUTIVE 4/10/2014 3:13:19 PM
2412 (0x096C)
*** [28000][18456][Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'NT AUTHORITY\SYSTEM'.
SMS_EXECUTIVE 4/10/2014 3:13:24 PM
2412 (0x096C)
*** [42000][4060][Microsoft][SQL Server Native Client 11.0][SQL Server]Cannot open database "CM_076" requested by the login. The login failed.
SMS_EXECUTIVE 4/10/2014 3:13:24 PM
2412 (0x096C)
*** [28000][18456][Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'NT AUTHORITY\SYSTEM'.
SMS_EXECUTIVE 4/10/2014 3:13:24 PM
2412 (0x096C)
*** [42000][4060][Microsoft][SQL Server Native Client 11.0][SQL Server]Cannot open database "CM_076" requested by the login. The login failed.
SMS_EXECUTIVE 4/10/2014 3:13:24 PM
2412 (0x096C)
*** Failed to connect to the SQL Server, connection type: SMS ACCESS.
SMS_EXECUTIVE 4/10/2014 3:13:24 PM
2412 (0x096C)
CSiteControlEx::GetCurrentSiteInfo: Failed to get SQL connection
SMS_EXECUTIVE 4/10/2014 3:13:24 PM
2412 (0x096C)
CSiteControlEx::GetMasterSCF:Failed to read site information from database, retry in 5 seconds ...
SMS_EXECUTIVE 4/10/2014 3:13:24 PM
2412 (0x096C)
*** [28000][18456][Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'NT AUTHORITY\SYSTEM'.
SMS_EXECUTIVE 4/10/2014 3:13:31 PM
2412 (0x096C)
*** [42000][4060][Microsoft][SQL Server Native Client 11.0][SQL Server]Cannot open database "CM_076" requested by the login. The login failed.
SMS_EXECUTIVE 4/10/2014 3:13:31 PM
2412 (0x096C)
*** [28000][18456][Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'NT AUTHORITY\SYSTEM'.
SMS_EXECUTIVE 4/10/2014 3:13:31 PM
2412 (0x096C)
*** [42000][4060][Microsoft][SQL Server Native Client 11.0][SQL Server]Cannot open database "CM_076" requested by the login. The login failed.
SMS_EXECUTIVE 4/10/2014 3:13:31 PM
2412 (0x096C)
*** Failed to connect to the SQL Server, connection type: SMS ACCESS.
SMS_EXECUTIVE 4/10/2014 3:13:31 PM
2412 (0x096C)
CSiteControlEx::GetCurrentSiteInfo: Failed to get SQL connection
SMS_EXECUTIVE 4/10/2014 3:13:31 PM
2412 (0x096C)
CSiteControlEx::GetMasterSCF:Failed to read site information from database, retry in 5 seconds ...
SMS_EXECUTIVE 4/10/2014 3:13:31 PM
2412 (0x096C)
SMS_STATUS_MANAGER is not running as part of this process, the SMS_EXECUTIVE to SMS_STATUS_MANAGER in-memory status message queue will not be used.
SMS_EXECUTIVE 4/10/2014 3:13:47 PM
2412 (0x096C)
Registered this process as a source of "SMS Server" events.
SMS_EXECUTIVE 4/10/2014 3:13:47 PM
2412 (0x096C)
Registered this process as a source of "SMS Client" events.
SMS_EXECUTIVE 4/10/2014 3:13:47 PM
2412 (0x096C)
Registered this process as a source of "SMS Provider" events.
SMS_EXECUTIVE 4/10/2014 3:13:47 PM
2412 (0x096C)
Status message reporting system initialized successfully.
SMS_EXECUTIVE 4/10/2014 3:13:47 PM
2412 (0x096C)
STATMSG: ID=500 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_EXECUTIVE" SYS=sccmserver.org SITE=076 PID=2368 TID=2412 GMTDATE=Thu Apr 10 19:13:47.950 2014 ISTR0="" ISTR1="" ISTR2="" ISTR3="" ISTR4=""
ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_EXECUTIVE 4/10/2014 3:13:47 PM
2412 (0x096C)
Certificate maintenance interval is every 1800 seconds
SMS_EXECUTIVE 4/10/2014 3:13:48 PM
2412 (0x096C)
SMS_AD_FOREST_DISCOVERY_MANAGER initialized, DLL = "\bin\x64\ADForestDisc.dll", startup type = "Scheduled", current state = "Stopped", requested operation = "None", next start time = "Sun Apr 13 00:00:00 2014 Eastern
Daylight Time". SMS_EXECUTIVE
4/10/2014 3:13:48 PM 2412 (0x096C)
STATMSG: ID=1105 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_AD_FOREST_DISCOVERY_MANAGER" SYS=sccmserver.org SITE=076 PID=2368 TID=2412 GMTDATE=Thu Apr 10 19:13:48.119 2014 ISTR0="2014 04 0 13 04 00 00 000" ISTR1="" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_EXECUTIVE 4/10/2014 3:13:48 PM
2412 (0x096C)
SMS_AD_SECURITY_GROUP_DISCOVERY_AGENT initialized, DLL = "\bin\x64\adsgdis.dll", startup type = "Scheduled", current state = "Stopped", requested operation = "None", next start time = "Thu Apr 10 15:15:00 2014 Eastern
Daylight Time". SMS_EXECUTIVE
4/10/2014 3:13:48 PM 2412 (0x096C)
STATMSG: ID=1105 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_AD_SECURITY_GROUP_DISCOVERY_AGENT" SYS=sccmserver.org SITE=076 PID=2368 TID=2412 GMTDATE=Thu Apr 10 19:13:48.120 2014 ISTR0="2014 04 4 10 19 15 00 000" ISTR1=""
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_EXECUTIVE 4/10/2014 3:13:48 PM
2412 (0x096C)
SMS_AD_SYSTEM_DISCOVERY_AGENT initialized, DLL = "\bin\x64\adsysdis.dll", startup type = "Scheduled", current state = "Stopped", requested operation = "None", next start time = "Thu Apr 10 15:15:00 2014 Eastern Daylight
Time". SMS_EXECUTIVE
4/10/2014 3:13:48 PM 2412 (0x096C)
STATMSG: ID=1105 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_AD_SYSTEM_DISCOVERY_AGENT" SYS=sccmserver.org SITE=076 PID=2368 TID=2412 GMTDATE=Thu Apr 10 19:13:48.157 2014 ISTR0="2014 04 4 10 19 15 00 000" ISTR1="" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_EXECUTIVE 4/10/2014 3:13:48 PM
2412 (0x096C)
SMS_AD_USER_DISCOVERY_AGENT initialized, DLL = "\bin\x64\adusrdis.dll", startup type = "Scheduled", current state = "Stopped", requested operation = "None", next start time = "Thu Apr 10 15:15:00 2014 Eastern Daylight
Time". SMS_EXECUTIVE
4/10/2014 3:13:48 PM 2412 (0x096C)
STATMSG: ID=1105 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_AD_USER_DISCOVERY_AGENT" SYS=sccmserver.org SITE=076 PID=2368 TID=2412 GMTDATE=Thu Apr 10 19:13:48.158 2014 ISTR0="2014 04 4 10 19 15 00 000" ISTR1="" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_EXECUTIVE 4/10/2014 3:13:48 PM
2412 (0x096C)
SMS_AI_KB_MANAGER initialized, DLL = "\bin\x64\aikbmgr.dll", startup type = "Automatic", current state = "Starting", requested operation = "Start".
SMS_EXECUTIVE 4/10/2014 3:13:48 PM
2412 (0x096C)
SMS_ALERT_NOTIFICATION initialized, DLL = "\bin\x64\NotiCtrl.dll", startup type = "Automatic", current state = "Starting", requested operation = "Start".
SMS_EXECUTIVE 4/10/2014 3:13:48 PM
2412 (0x096C)
SMS_AMT_PROXY_COMPONENT initialized, DLL = "\bin\x64\amtproxymgr.dll", startup type = "Automatic", current state = "Starting", requested operation = "Start".
SMS_EXECUTIVE 4/10/2014 3:13:48 PM
2412 (0x096C)
SMS_CERTIFICATE_MANAGER initialized, DLL = "\bin\x64\CertMgr.dll", startup type = "Automatic", current state = "Starting", requested operation = "Start".
SMS_EXECUTIVE 4/10/2014 3:13:48 PM
2412 (0x096C)
SMS_CLIENT_CONFIG_MANAGER initialized, DLL = "\bin\x64\ccm.dll", startup type = "Automatic", current state = "Starting", requested operation = "Start".
SMS_EXECUTIVE 4/10/2014 3:13:48 PM
2412 (0x096C)
SMS_CLIENT_HEALTH initialized, DLL = "\bin\x64\chmgr.dll", startup type = "Automatic", current state = "Starting", requested operation = "Start".
SMS_EXECUTIVE 4/10/2014 3:13:48 PM
2412 (0x096C)
SMS_CLOUD_SERVICES_MANAGER initialized, DLL = "\bin\x64\CloudMgr.dll", startup type = "Automatic", current state = "Starting", requested operation = "Start".
SMS_EXECUTIVE 4/10/2014 3:13:48 PM
2412 (0x096C)
SMS_COLLECTION_EVALUATOR initialized, DLL = "\bin\x64\colleval.dll", startup type = "Automatic", current state = "Starting", requested operation = "Start".
SMS_EXECUTIVE 4/10/2014 3:13:48 PM
2412 (0x096C)
SMS_COMPONENT_MONITOR initialized, DLL = "\bin\x64\compmon.dll", startup type = "Automatic", current state = "Starting", requested operation = "Start".
SMS_EXECUTIVE 4/10/2014 3:13:48 PM
2412 (0x096C)
SMS_COMPONENT_STATUS_SUMMARIZER initialized, DLL = "\bin\x64\compsumm.dll", startup type = "Automatic", current state = "Starting", requested operation = "Start".
SMS_EXECUTIVE 4/10/2014 3:13:48 PM
2412 (0x096C)
SMS_DATABASE_NOTIFICATION_MONITOR initialized, DLL = "\bin\x64\smsdbmon.dll", startup type = "Automatic", current state = "Starting", requested operation = "Start".
SMS_EXECUTIVE 4/10/2014 3:13:48 PM
2412 (0x096C)
SMS_DESPOOLER initialized, DLL = "\bin\x64\despool.dll", startup type = "Automatic", current state = "Starting", requested operation = "Start".
SMS_EXECUTIVE 4/10/2014 3:13:48 PM
2412 (0x096C)
SMS_DISCOVERY_DATA_MANAGER initialized, DLL = "\bin\x64\ddm.dll", startup type = "Automatic", current state = "Starting", requested operation = "Start".
SMS_EXECUTIVE 4/10/2014 3:13:48 PM
2412 (0x096C)
SMS_DISTRIBUTION_MANAGER initialized, DLL = "\bin\x64\distmgr.dll", startup type = "Automatic", current state = "Starting", requested operation = "Start".
SMS_EXECUTIVE 4/10/2014 3:13:48 PM
2412 (0x096C)
SMS_ENDPOINT_PROTECTION_CONTROL_MANAGER initialized, DLL = "\bin\x64\EPCtrlMgr.dll", startup type = "Automatic", current state = "Starting", requested operation = "Start".
SMS_EXECUTIVE 4/10/2014 3:13:48 PM
2412 (0x096C)
SMS_ENDPOINT_PROTECTION_MANAGER initialized, DLL = "\bin\x64\EPMgr.dll", startup type = "Automatic", current state = "Starting", requested operation = "Start".
SMS_EXECUTIVE 4/10/2014 3:13:48 PM
2412 (0x096C)
SMS_EN_ADSERVICE_MONITOR initialized, DLL = "\bin\x64\adctrl.dll", startup type = "Automatic", current state = "Starting", requested operation = "Start".
SMS_EXECUTIVE 4/10/2014 3:13:48 PM
2412 (0x096C)
SMS_FALLBACK_STATUS_POINT initialized, DLL = "\bin\x64\fspmgr.dll", startup type = "Automatic", current state = "Starting", requested operation = "Start".
SMS_EXECUTIVE 4/10/2014 3:13:48 PM
2412 (0x096C)
SMS_HIERARCHY_MANAGER initialized, DLL = "\bin\x64\hman.dll", startup type = "Automatic", current state = "Starting", requested operation = "Start".
SMS_EXECUTIVE 4/10/2014 3:13:48 PM
2412 (0x096C)
SMS_INBOX_MANAGER initialized, DLL = "\bin\x64\inboxmgr.dll", startup type = "Automatic", current state = "Starting", requested operation = "Start".
SMS_EXECUTIVE 4/10/2014 3:13:48 PM
2412 (0x096C)
SMS_INBOX_MONITOR initialized, DLL = "\bin\x64\inboxmon.dll", startup type = "Automatic", current state = "Starting", requested operation = "Start".
SMS_EXECUTIVE 4/10/2014 3:13:48 PM
2412 (0x096C)
SMS_INVENTORY_DATA_LOADER initialized, DLL = "\bin\x64\dataldr.dll", startup type = "Automatic", current state = "Starting", requested operation = "Start".
SMS_EXECUTIVE 4/10/2014 3:13:48 PM
2412 (0x096C)
SMS_INVENTORY_PROCESSOR initialized, DLL = "\bin\x64\invproc.dll", startup type = "Automatic", current state = "Starting", requested operation = "Start".
SMS_EXECUTIVE 4/10/2014 3:13:48 PM
2412 (0x096C)
SMS_LAN_SENDER initialized, DLL = "\bin\x64\sender.dll", startup type = "Automatic", current state = "Starting", requested operation = "Start".
SMS_EXECUTIVE 4/10/2014 3:13:48 PM
2412 (0x096C)
SMS_LICENSE_MANAGER initialized, DLL = "\bin\x64\licensemgr.dll", startup type = "Automatic", current state = "Starting", requested operation = "Start".
SMS_EXECUTIVE 4/10/2014 3:13:48 PM
2412 (0x096C)
SMS_MIGRATION_MANAGER initialized, DLL = "\bin\x64\migmctrl.dll", startup type = "Automatic", current state = "Starting", requested operation = "Start".
SMS_EXECUTIVE 4/10/2014 3:13:48 PM
2412 (0x096C)
SMS_MP_CONTROL_MANAGER initialized, DLL = "\bin\x64\mpcontrol.dll", startup type = "Automatic", current state = "Starting", requested operation = "Start".
SMS_EXECUTIVE 4/10/2014 3:13:48 PM
2412 (0x096C)
SMS_MP_FILE_DISPATCH_MANAGER initialized, DLL = "\bin\x64\mpfdm.dll", startup type = "Automatic", current state = "Starting", requested operation = "Start".
SMS_EXECUTIVE 4/10/2014 3:13:48 PM
2412 (0x096C)
SMS_NETWORK_DISCOVERY initialized, DLL = "\bin\x64\netdisc.dll", startup type = "Scheduled", current state = "Stopped", requested operation = "None", not scheduled to start again.
SMS_EXECUTIVE 4/10/2014 3:13:48 PM
2412 (0x096C)
STATMSG: ID=1106 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_NETWORK_DISCOVERY" SYS=sccmserver.org SITE=076 PFirst, if your site server is having problems logging into the DB, which it clearly is, you've got bigger issues than just PXE.
Have you verified the permissions in your SQL Server instance for the local System account (I'm assuming at this point that it is local to the site server)?
Jason | http://blog.configmgrftw.com -
Dear ALL
After successfully shifting the CRM from 2011 to 2013 i found a problem in Reporting section none of the report is working after some finding i conclude that MSCRM_FetchDataSource is not able to connect successfully
Through my report manager i tried to test the connection of MSCRM_FetchDataSource but i got the following error
System.Data.SqlClient.SqlException: Cannot open database "MSCRM_CONFIG" requested by the login. The login failed. Login failed for
user 'NT AUTHORITY\SYSTEM'.
I already add the NT Authority \ System as a db_owner under my database user of MSCRM_CONFIG
But still no success any one have any idea why it's happaning
Regards
RBI found a solution I hope my post will help other
I gave the db_owner to 'NT AUTHORITY\SYSTEM' and 'NT AUTHORITY\NETWORK' and assigned with both CRM and Config database
It resolved my issue
RB
Maybe you are looking for
-
Dell Lattitude E6510 Windows 7 Professional Itunes installed on USB Harddrive Now when I start the program: Dialog box: "Please wait while Windows configures Itunes" followed by: Dialog box: 'iTunesMiniPlayer.Resources' is not a valid short file name
-
Item category determination for Free Goods
Hi I have configured inclusive Free Goods and have a second line correctly determined when I create a quotation or a sales order for a particular product. However, I keep getting the error "Item 20: No item category could be determined". I have creat
-
Capital Goods(Asset) Procurement
Hi all, I have a scenario where company is procuring an asset and the vendor from which the company is procuring the Asset is sending that Asset in different parts like for a whole machinery the vendor is dismantling at its end and then assemble insi
-
Hi all I am facing a weird error here. When i enter username,password to relogin to IR or ID when the connection broke, I am not able to log and i get the following message <i>Unable to connect to server abc:50008. Check server availability Connectio
-
Suitcase Fusion 3 and OS X 6.6
I just updated to OS X 6.6 and found that I needed to update Suitcase well. Suitcase is now Suitcase Fusion 3 and is showing me that all of my system fonts are open and locked. I really don't want to work with all of those fonts open. Is there a way