NF3 & 6800(series) compatibility ???

here is a nice long thread to read for anyone who has a 6800(series) VGA crad that freezes on Directx games on an nforce3 chipset.
NF3 & 6800 compatibility
btw i have found that fastwrites do up my 3dmark scores so running with them off is not acceptable for me.
I can't wait for my MSI K8T NEO2-FIR motherboard.

Here is the old thread 6800 cards-a no-no with nforce boards?
My Asus 6800GTTD (16/6) run just fine with Dfi Infinity and Asus A8V ~410/870 but with Neo2 I had to run it ~350/850 so I switched it to X800 Pro Vivo (see sig).

Similar Messages

Any one is using K8N Neo MS-7030 with 6600/6800 series with LCD monitor ?

any one is using K8N Neo MS-7030 with 6600/6800 series with LCD monitor and his card is connected through the DVI cable without problems ?

yup, no problems here! connected to a 19" AGNeovo F-419 TFT LCD, using DVI cable. nice picture!

USM-SA1 Series Compatibility

Hi, I wanted to know if the USM-SA1 OTG usb drives are compatible with the Xperia Z3/Z3+ series. Thanks,K

Hello there, Kshehab! Yes, the Sony USM-SA1 is compatible with the Sony Xperia Z3 and the Sony Xperia Z3+! You may check this link for further compatibility information: http://www.sony.net/Products/Media/Microvault/products/usm-sa1/compatibility/index.html Best regards,

N series compatibility in USA & Canada

hi. can somebody to tell me exactly if one of the following N series models as: N80, N73 ME, N95, bought in United Emirates, are full compatible in USA or Canada? I'll do appreciate for any answer. I wanna also to mention: these all models are not locked in any network

To my knowledge, Nokia has not released a single phone compatible with the funky 3G frequencies in the US. And the only SIM card enabled (UMTS not WCDMA) network in the US is AT&T Wireless (formerly Cingular). Verizon and Spring both have 3G capability, but they are WCDMA (meaning only their phones).
I use my N95 (and previously an E70) with T-Mobile and get access to EDGE. It's no 3G, but I am not holding my breath. In America, mobile phone technology is still in the 20th century.
Anyway, in the US, you can use an unlocked phone with AT&T Wireless and T-Mobile. In Canada, I believe Rogers is one provider on a GSM network and there may be others.

[Athlon64] HyperX and Neo2 Series Compatibility?

Hey, I recently got a 1gb set of PC3200(KHX3200AK2/1G) for my K8T Neo2 Series Board and they don't work. The system stops at early chipset initialization. I talked to Kingston and MSI, hey both gave me things to try; changing the CAS latency to 3, Enabling the IT timing; and still no luck. They both said they should work. Any ideas or things I'm doing wrong? Cheers
System- VIA K8T800 Pro Chipset Based- K8T Neo 2 series
- AMD 64 3000+
- 512 PC3200 400mhz Kingston (trying to get the hyperx to work)
- ATI 9550 AGP Graphics Card

https://forum-en.msi.com/index.php?topic=84584.0
https://forum-en.msi.com/index.php?topic=84599.msg603441#msg603441
https://forum-en.msi.com/index.php?topic=88896.0
Sticky posts contain a lot of superb info. One only has to click and read...

Intel Pentium D 9xx series Compatibility with MSI 955x?

Hi All,
I just wanted to get some feedback from others who may be running an Intel Pentium D 9xx series processor on a MSI 955x board. What processor are you running and have you had any compatiblity problems, strange quirks, etc?
I found this link as well but wanted to get some real world opinions!
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=664&kind=1
Thanks!!

They are compatible and won't have any issues.

Can I use my USA-purchased HP 6800 Series printer in Europe?

I'm moving to Europe and have several computers and printers that I want to take with me. I know I can use my PC's, but I want to take my printers, too. They don't appear to have a 110/220 switch on them, but I don't know if I can use converters/adapters to get them to work.

Hi
My goodness you are making me work through my memory for this one. That printer my be 5 or 6 years old now. I believe that you should be able to use your printer from an electric viewpoint. However, you will also have to have your printer reset to accept European region cartridges.
1. Electricity
I managed to find a work colleague who still has one of these printers and you should be OK as long as you check the power block (black box) that is on the power cable. If you look at the specifications that are molded into the block it should say that it allows 100 - 220V. If so, then you just need a standard power cable that goes from the wall plug socket into the power block. If the power block says it only handles 100-120V then you will need to get a complete new power lead with a 100-220V power block.
2. European region cartridges
Once you clear up your power issues you then have to get your printer reset so that it will accept european region cartridges. For this you will need to call HP support.
If I remember correctly you will probably have to be in your destination european country before your printer can be reset because you may need the european supplies in order for the reset to work but maybe check with HP support before you leave the USA.
Here is a link to a document explaining what you need to do.
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&lang=en&docname=c02558798
Hope that this helps
---- If my answer was helpful please click the Kudos star.
If your problem is solved please click the Accept as Solution button so other forum users can use the solution.---->
(I am an HP employee) I am not a expert on all our products, but I'll do my best to help you.

New Msi Neo2 Platinum....many problems

Here`s my setup:
A64 3200 939 winny watercooled
Msi Neo2 Platinum bios ver 1.4 vcore 1.50 HTT x4
2x512 corsair xmspc3200xlpt timings 2.5-3-3-7 1T vdimm 2.85 235x10 fsb 1:1 in the first 2 slots next to the cpu and tried the last 2 also
BFG 6800 GT OC 256mb 1.65 volts
SB Audigy 2 zs in the third pci slot
80 gig Maxtor
80 gig WD SE
Truepower 550 about 2 yrs old 12v amps are rated at 24a
6 case fans
waterpump is on the 12 volt rail
VC is on its own rail or leg
hdd`s and floppy are on thier own rails or leg
Fans and water pump is on its own rails or leg
Cd rom and burner is on its own rail or leg
i ran memtest on my on my sticks seperate and together and passed at 250 fsb 1:1 for 5 hrs and they are a matched set
im getting random errors,device driver errors and crashes in HL2 and in 3dmark05 and in 03 i get as high as 2500mhz and my rig reboots itself tried changing ram timings to 3-3-3-8 and no change
curious my psu not enough for the job amp wise ? i checked my 12v5v and 3.3v rails with a dvom and im getting 11.96 on the 12v rail under load, 4.98 under load and 3.28 under load but the bios reads about .20 to .27 under what my meter says
this psu ran flawless with a NF7-S ver2 ,barton xp2500 mobile@2477mhz and a 9800 pro
im new to the board but not new to o/cing and this board has me baffled any ideas would be helpful

Sounds like you are suffering from the NF3 + 6800 combination problem.
Theese things that gives troubles are dx9 it seems.
Interesting thread:
NF3 & 6800(series) compatibility ???

K8N NEO PE MS-7030 and Geforce 6800 Vanilla

I am on the way to buy a new graphic card , and I have 2 choices : 1- XFX 6600GT AGP 8x 128MB 500/100 and 2-XFX 6800 AGP 8X 128MB 325/700, the difference between both about 25$ for the 6800
I prefer the 6800 but I read bad stories with nforce 3 mobos, so it is safe to go with the 6600GT, I know there is no much difference between 6600GT and 6800 but in 6800 you can unlock the extra pipelines and the vertex shader
I read a lot of topics about freezing and craches with ms7030 and 6800 series ??
any one is using K8N NEO PE MS-7030 and Geforce 6600 Vanilla without problems ??
is the problem still or it has been solved ??
SO what is your recommendation ?
Thanks

Quote from: Russ_xp on 23-October-05, 22:14:28
Go for the 6800, the problems with the nf3 chipset affect all series 6 cards including the 6600GT. The solution is simple - just disable fast writes in the BIOS.
The 6800 is a native AGP card but the 6600GT is a PCIe card with a HSI chip to convert it to AGP and it gets very hot. Also you may get lucky with the pipes and it should overclock a bit. If you stretch a bit further get the 6800GT with 256Mb and it OC's to Ultra speeds.
Too right... In addition disabling fastwrites and the dreaded ATI/NV speedup option, make sure that the 2D/3D accel speeds are at the same settings, if not the card tends to "freak out".
I have a BFG6800 OC ("vanilla" 6800 GPU/slight "factory OC") and I got lucky & was able to unlock the hidden hardware. I had an early 6800 GPU though & I think that Nvidia "closed the door" on that mod with the later builds. Something to keep in mind.
Regardless, with the unlocked hardware I was able to get near (close, but not quite) stock GT speeds but the benchmark score didn't really translate to the real world. The big limitation of the 6800 is the puny 128 mb of RAM. If I had it to do over again, I'd saved my pennies & got a GT (w/256mb of RAM), I'd be a lot happier with it. It's not that the 6800 is bad, but the GT is a LOT better.
The good thing is that the 6800 GT prices are starting to come down a bunch since the 7800's came out. If you shop around, you should be able to find a great deal on one. I'm about to go looking myself, if I come across a killer deal, I'll post back.
Edit: I've done a quick search & the chances of just finding an AGP 6800GT don't look too good. I've checked 5 vendors so far and they're either out of stock or discontinued I may have waited a bit too long....
But vanilla 6800's can be found for about $200.

[SOLVED] Mobility Radeon HD 5400 Series with xf86-video-ati

I have an hp laptop with the following VGA Devices:
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Manhattan [Mobility Radeon HD 5400 Series]
I installed:
xf86-video-ati 1:7.0.0-1
When I run:
Xorg -configure
I get:
[ 8983.828] (EE)
[ 8983.829] (EE) Backtrace:
[ 8983.830] (EE) 0: Xorg (xorg_backtrace+0x36) [0x58a426]
[ 8983.832] (EE) 1: Xorg (0x400000+0x18e279) [0x58e279]
[ 8983.833] (EE) 2: /usr/lib/libpthread.so.0 (0x7f5ea78c8000+0xf1e0) [0x7f5ea78d71e0]
[ 8983.834] (EE) 3: /usr/lib/xorg/modules/drivers/radeon_drv.so (0x7f5ea53e2000+0x41bd4) [0x7f5ea5423bd4]
[ 8983.836] (EE) 4: Xorg (DoConfigure+0xdec) [0x46b15c]
[ 8983.837] (EE) 5: Xorg (0x400000+0x7a728) [0x47a728]
[ 8983.838] (EE) 6: Xorg (0x400000+0x26786) [0x426786]
[ 8983.839] (EE) 7: /usr/lib/libc.so.6 (__libc_start_main+0xf5) [0x7f5ea654ca15]
[ 8983.841] (EE) 8: Xorg (0x400000+0x26cad) [0x426cad]
[ 8983.842] (EE)
[ 8983.843] (EE) Segmentation fault at address 0x18
[ 8983.847]
Fatal server error:
[ 8983.848] Caught signal 11 (Segmentation fault). Server aborting
What did I tried:
Using vesa instead --> gives me a flickering screen
Using intel instead --> gives me a black screen
Somebody an idea, what I can do?
Last edited by haschibaschi (2013-01-23 21:25:23)

Ok, I removed the packages
xf86-video-intel xf86-video-vesa xf86-video-fbdev
So its the xf86-video-ati, which is used.
Here is my Xorg.0.log
[ 9.006]
X.Org X Server 1.13.2
Release Date: 2013-01-24
[ 9.006] X Protocol Version 11, Revision 0
[ 9.006] Build Operating System: Linux 3.7.4-1-ARCH x86_64
[ 9.006] Current Operating System: Linux flaptop 3.7.4-1-ARCH #1 SMP PREEMPT Mon Jan 21 23:05:29 CET 2013 x86_64
[ 9.006] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=c40fce05-33ae-4a4d-aa51-21295185a22f ro quiet
[ 9.006] Build Date: 25 January 2013 09:33:50AM
[ 9.006]
[ 9.006] Current version of pixman: 0.28.2
[ 9.006] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 9.006] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 9.006] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 26 00:26:38 2013
[ 9.109] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 9.220] (==) No Layout section. Using the first Screen section.
[ 9.220] (==) No screen section available. Using defaults.
[ 9.220] (**) |-->Screen "Default Screen Section" (0)
[ 9.220] (**) | |-->Monitor "<default monitor>"
[ 9.221] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 9.221] (==) Automatically adding devices
[ 9.221] (==) Automatically enabling devices
[ 9.221] (==) Automatically adding GPU devices
[ 9.326] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 9.326] Entry deleted from font path.
[ 9.368] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 9.368] Entry deleted from font path.
[ 9.368] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 9.368] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 9.368] Entry deleted from font path.
[ 9.368] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 9.368] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 9.368] (**) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
[ 9.368] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 9.368] (II) Loader magic: 0x7fcc40
[ 9.368] (II) Module ABI versions:
[ 9.368] X.Org ANSI C Emulation: 0.4
[ 9.368] X.Org Video Driver: 13.1
[ 9.368] X.Org XInput driver : 18.0
[ 9.368] X.Org Server Extension : 7.0
[ 9.368] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 9.369] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 9.371] (--) PCI:*(0:0:2:0) 8086:0046:103c:144a rev 2, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00005050/8
[ 9.371] (--) PCI: (0:1:0:0) 1002:68e0:103c:144a rev 0, Mem @ 0xa0000000/268435456, 0xc4400000/131072, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[ 9.371] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 9.384] Initializing built-in extension Generic Event Extension
[ 9.384] Initializing built-in extension SHAPE
[ 9.384] Initializing built-in extension MIT-SHM
[ 9.384] Initializing built-in extension XInputExtension
[ 9.384] Initializing built-in extension XTEST
[ 9.384] Initializing built-in extension BIG-REQUESTS
[ 9.384] Initializing built-in extension SYNC
[ 9.384] Initializing built-in extension XKEYBOARD
[ 9.384] Initializing built-in extension XC-MISC
[ 9.385] Initializing built-in extension SECURITY
[ 9.385] Initializing built-in extension XINERAMA
[ 9.385] Initializing built-in extension XFIXES
[ 9.385] Initializing built-in extension RENDER
[ 9.385] Initializing built-in extension RANDR
[ 9.385] Initializing built-in extension COMPOSITE
[ 9.385] Initializing built-in extension DAMAGE
[ 9.385] Initializing built-in extension MIT-SCREEN-SAVER
[ 9.385] Initializing built-in extension DOUBLE-BUFFER
[ 9.385] Initializing built-in extension RECORD
[ 9.385] Initializing built-in extension DPMS
[ 9.385] Initializing built-in extension X-Resource
[ 9.385] Initializing built-in extension XVideo
[ 9.385] Initializing built-in extension XVideo-MotionCompensation
[ 9.385] Initializing built-in extension XFree86-VidModeExtension
[ 9.385] Initializing built-in extension XFree86-DGA
[ 9.385] Initializing built-in extension XFree86-DRI
[ 9.385] Initializing built-in extension DRI2
[ 9.385] (II) LoadModule: "glx"
[ 9.439] (II) Loading /usr/lib/xorg/modules/updates/extensions/libglx.so
[ 9.497] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 9.497] compiled for 6.9.0, module version = 1.0.0
[ 9.498] Loading extension GLX
[ 9.498] (==) Matched intel as autoconfigured driver 0
[ 9.498] (==) Matched ati as autoconfigured driver 1
[ 9.498] (==) Matched intel as autoconfigured driver 2
[ 9.498] (==) Matched vesa as autoconfigured driver 3
[ 9.498] (==) Matched modesetting as autoconfigured driver 4
[ 9.498] (==) Matched fbdev as autoconfigured driver 5
[ 9.498] (==) Assigned the driver to the xf86ConfigLayout
[ 9.498] (II) LoadModule: "intel"
[ 9.544] (WW) Warning, couldn't open module intel
[ 9.544] (II) UnloadModule: "intel"
[ 9.544] (II) Unloading intel
[ 9.544] (EE) Failed to load module "intel" (module does not exist, 0)
[ 9.544] (II) LoadModule: "ati"
[ 9.545] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 9.558] (II) Module ati: vendor="X.Org Foundation"
[ 9.558] compiled for 1.13.0, module version = 7.0.0
[ 9.558] Module class: X.Org Video Driver
[ 9.558] ABI class: X.Org Video Driver, version 13.0
[ 9.558] (II) LoadModule: "radeon"
[ 9.559] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 9.640] (II) Module radeon: vendor="X.Org Foundation"
[ 9.641] compiled for 1.13.0, module version = 7.0.0
[ 9.641] Module class: X.Org Video Driver
[ 9.641] ABI class: X.Org Video Driver, version 13.0
[ 9.641] (II) LoadModule: "vesa"
[ 9.641] (WW) Warning, couldn't open module vesa
[ 9.641] (II) UnloadModule: "vesa"
[ 9.641] (II) Unloading vesa
[ 9.641] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 9.641] (II) LoadModule: "modesetting"
[ 9.641] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 9.650] (II) Module modesetting: vendor="X.Org Foundation"
[ 9.650] compiled for 1.13.1, module version = 0.6.0
[ 9.650] Module class: X.Org Video Driver
[ 9.650] ABI class: X.Org Video Driver, version 13.1
[ 9.650] (II) LoadModule: "fbdev"
[ 9.651] (WW) Warning, couldn't open module fbdev
[ 9.651] (II) UnloadModule: "fbdev"
[ 9.651] (II) Unloading fbdev
[ 9.651] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 9.651] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE
[ 9.655] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 9.655] (++) using VT number 7
[ 9.670] (II) [KMS] Kernel modesetting enabled.
[ 9.670] (II) modesetting(0): using drv /dev/dri/card0
[ 9.670] (II) modesetting(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 9.670] (==) modesetting(0): Depth 24, (==) framebuffer bpp 32
[ 9.670] (==) modesetting(0): RGB weight 888
[ 9.670] (==) modesetting(0): Default visual is TrueColor
[ 9.670] (II) modesetting(0): ShadowFB: preferred YES, enabled YES
[ 9.670] (II) modesetting(0): Output LVDS-0 has no monitor section
[ 9.683] (II) modesetting(0): Output VGA-0 has no monitor section
[ 9.683] (II) modesetting(0): EDID for output LVDS-0
[ 9.683] (II) modesetting(0): Manufacturer: AUO Model: 22ec Serial#: 0
[ 9.683] (II) modesetting(0): Year: 2009 Week: 1
[ 9.683] (II) modesetting(0): EDID Version: 1.3
[ 9.683] (II) modesetting(0): Digital Display Input
[ 9.683] (II) modesetting(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 9.683] (II) modesetting(0): Gamma: 2.20
[ 9.683] (II) modesetting(0): No DPMS capabilities specified
[ 9.683] (II) modesetting(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 9.683] (II) modesetting(0): First detailed timing is preferred mode
[ 9.683] (II) modesetting(0): redX: 0.620 redY: 0.340 greenX: 0.330 greenY: 0.570
[ 9.683] (II) modesetting(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 9.683] (II) modesetting(0): Manufacturer's mask: 0
[ 9.683] (II) modesetting(0): Supported detailed timing:
[ 9.683] (II) modesetting(0): clock: 69.3 MHz Image Size: 344 x 193 mm
[ 9.683] (II) modesetting(0): h_active: 1366 h_sync: 1398 h_sync_end 1422 h_blank_end 1432 h_border: 0
[ 9.683] (II) modesetting(0): v_active: 768 v_sync: 771 v_sync_end 775 v_blanking: 806 v_border: 0
[ 9.684] (II) modesetting(0): Unknown vendor-specific block f
[ 9.684] (II) modesetting(0): AUO
[ 9.684] (II) modesetting(0): B156XW02 V2
[ 9.684] (II) modesetting(0): EDID (in hex):
[ 9.684] (II) modesetting(0): 00ffffffffffff0006afec2200000000
[ 9.684] (II) modesetting(0): 01130103802213780ac8959e57549226
[ 9.684] (II) modesetting(0): 0f505400000001010101010101010101
[ 9.684] (II) modesetting(0): 010101010101121b5642500026302018
[ 9.684] (II) modesetting(0): 340058c1100000180000000f00000000
[ 9.684] (II) modesetting(0): 00000000000000000020000000fe0041
[ 9.684] (II) modesetting(0): 554f0a202020202020202020000000fe
[ 9.684] (II) modesetting(0): 004231353658573032205632200a00c0
[ 9.684] (II) modesetting(0): Printing probed modes for output LVDS-0
[ 9.684] (II) modesetting(0): Modeline "1366x768"x60.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz eP)
[ 9.697] (II) modesetting(0): EDID for output VGA-0
[ 9.697] (II) modesetting(0): Output LVDS-0 connected
[ 9.697] (II) modesetting(0): Output VGA-0 disconnected
[ 9.697] (II) modesetting(0): Using exact sizes for initial modes
[ 9.697] (II) modesetting(0): Output LVDS-0 using initial mode 1366x768
[ 9.697] (II) modesetting(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 9.697] (==) modesetting(0): DPI set to (96, 96)
[ 9.697] (II) Loading sub module "fb"
[ 9.697] (II) LoadModule: "fb"
[ 9.697] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 9.730] (II) Module fb: vendor="X.Org Foundation"
[ 9.730] compiled for 1.13.2, module version = 1.0.0
[ 9.730] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9.730] (II) Loading sub module "shadow"
[ 9.730] (II) LoadModule: "shadow"
[ 9.730] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 9.744] (II) Module shadow: vendor="X.Org Foundation"
[ 9.744] compiled for 1.13.2, module version = 1.1.0
[ 9.744] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9.744] (==) RADEON(G0): Depth 24, (--) framebuffer bpp 32
[ 9.744] (II) RADEON(G0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 9.744] (==) RADEON(G0): Default visual is TrueColor
[ 9.744] (==) RADEON(G0): RGB weight 888
[ 9.744] (II) RADEON(G0): Using 8 bits per RGB (8 bit DAC)
[ 9.744] (--) RADEON(G0): Chipset: "ATI Mobility Radeon HD 5000 Series" (ChipID = 0x68e0)
[ 9.745] (II) Loading sub module "dri2"
[ 9.745] (II) LoadModule: "dri2"
[ 9.745] (II) Module "dri2" already built-in
[ 9.745] (II) Loading sub module "exa"
[ 9.745] (II) LoadModule: "exa"
[ 9.745] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 9.762] (II) Module exa: vendor="X.Org Foundation"
[ 9.762] compiled for 1.13.2, module version = 2.6.0
[ 9.762] ABI class: X.Org Video Driver, version 13.1
[ 9.762] (II) RADEON(G0): KMS Color Tiling: enabled
[ 9.762] (II) RADEON(G0): KMS Color Tiling 2D: enabled
[ 9.762] (II) RADEON(G0): KMS Pageflipping: enabled
[ 9.762] (II) RADEON(G0): SwapBuffers wait for vsync: enabled
[ 9.765] (II) RADEON(G0): Output LVDS-1 has no monitor section
[ 9.767] (II) RADEON(G0): Output HDMI-0 has no monitor section
[ 9.893] (II) RADEON(G0): Output VGA-1 has no monitor section
[ 9.896] (II) RADEON(G0): EDID for output LVDS-1
[ 9.896] (II) RADEON(G0): Printing probed modes for output LVDS-1
[ 9.896] (II) RADEON(G0): Modeline "1366x768"x60.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz eP)
[ 9.896] (II) RADEON(G0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
[ 9.896] (II) RADEON(G0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 9.896] (II) RADEON(G0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 9.896] (II) RADEON(G0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 9.896] (II) RADEON(G0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
[ 9.896] (II) RADEON(G0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
[ 9.896] (II) RADEON(G0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 9.899] (II) RADEON(G0): EDID for output HDMI-0
[ 10.023] (II) RADEON(G0): EDID for output VGA-1
[ 10.023] (II) RADEON(G0): Output LVDS-1 connected
[ 10.023] (II) RADEON(G0): Output HDMI-0 disconnected
[ 10.023] (II) RADEON(G0): Output VGA-1 disconnected
[ 10.023] (II) RADEON(G0): Using exact sizes for initial modes
[ 10.023] (II) RADEON(G0): Output LVDS-1 using initial mode 1366x768
[ 10.023] (II) RADEON(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 10.023] (II) RADEON(G0): mem size init: gart size :1fdff000 vram size: s:20000000 visible:fba0000
[ 10.023] (II) RADEON(G0): EXA: Driver will allow EXA pixmaps in VRAM
[ 10.024] (==) RADEON(G0): DPI set to (96, 96)
[ 10.024] (II) Loading sub module "fb"
[ 10.024] (II) LoadModule: "fb"
[ 10.024] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 10.024] (II) Module fb: vendor="X.Org Foundation"
[ 10.024] compiled for 1.13.2, module version = 1.0.0
[ 10.024] ABI class: X.Org ANSI C Emulation, version 0.4
[ 10.024] (II) Loading sub module "ramdac"
[ 10.024] (II) LoadModule: "ramdac"
[ 10.024] (II) Module "ramdac" already built-in
[ 10.024] (==) Depth 24 pixmap format is 32 bpp
[ 10.037] (II) RADEON(G0): [DRI2] Setup complete
[ 10.037] (II) RADEON(G0): [DRI2] DRI driver: r600
[ 10.037] (II) RADEON(G0): [DRI2] VDPAU driver: r600
[ 10.037] (II) RADEON(G0): Front buffer size: 4128K
[ 10.037] (II) RADEON(G0): VRAM usage limit set to 228182K
[ 10.048] (==) RADEON(G0): Backing store disabled
[ 10.048] (II) RADEON(G0): Direct rendering enabled
[ 10.048] (II) RADEON(G0): Setting EXA maxPitchBytes
[ 10.048] (II) EXA(256): Driver allocated offscreen pixmaps
[ 10.048] (II) EXA(256): Driver registered support for the following operations:
[ 10.048] (II) Solid
[ 10.048] (II) Copy
[ 10.048] (II) Composite (RENDER acceleration)
[ 10.048] (II) UploadToScreen
[ 10.048] (II) DownloadFromScreen
[ 10.048] (II) RADEON(G0): Acceleration enabled
[ 10.048] (==) RADEON(G0): DPMS enabled
[ 10.048] (==) RADEON(G0): Silken mouse enabled
[ 10.049] (II) RADEON(G0): Set up textured video
[ 10.049] (II) RADEON(G0): [XvMC] Associated with Radeon Textured Video.
[ 10.049] (II) RADEON(G0): [XvMC] Extension initialized.
[ 10.049] (II) RADEON(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 10.056] (==) modesetting(0): Backing store disabled
[ 10.056] (==) modesetting(0): Silken mouse enabled
[ 10.056] (II) modesetting(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 10.056] (==) modesetting(0): DPMS enabled
[ 10.080] (--) RandR disabled
[ 10.100] (EE) GLX error: Can not get required symbols.
[ 10.100] (II) modesetting(0): Damage tracking initialized
[ 10.100] (II) modesetting(0): Setting screen physical size to 361 x 203
[ 10.428] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 10.428] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10.428] (II) LoadModule: "evdev"
[ 10.429] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 10.498] (II) Module evdev: vendor="X.Org Foundation"
[ 10.498] compiled for 1.13.0, module version = 2.7.3
[ 10.498] Module class: X.Org XInput Driver
[ 10.498] ABI class: X.Org XInput driver, version 18.0
[ 10.498] (II) Using input driver 'evdev' for 'Power Button'
[ 10.498] (**) Power Button: always reports core events
[ 10.498] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 10.498] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 10.498] (--) evdev: Power Button: Found keys
[ 10.498] (II) evdev: Power Button: Configuring as keyboard
[ 10.498] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 10.498] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 10.498] (**) Option "xkb_rules" "evdev"
[ 10.498] (**) Option "xkb_model" "evdev"
[ 10.498] (**) Option "xkb_layout" "ch"
[ 10.498] (**) Option "xkb_variant" "de"
[ 10.547] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[ 10.547] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 10.547] (II) Using input driver 'evdev' for 'Video Bus'
[ 10.548] (**) Video Bus: always reports core events
[ 10.548] (**) evdev: Video Bus: Device: "/dev/input/event14"
[ 10.548] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 10.548] (--) evdev: Video Bus: Found keys
[ 10.548] (II) evdev: Video Bus: Configuring as keyboard
[ 10.548] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14/event14"
[ 10.548] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 10.548] (**) Option "xkb_rules" "evdev"
[ 10.548] (**) Option "xkb_model" "evdev"
[ 10.548] (**) Option "xkb_layout" "ch"
[ 10.548] (**) Option "xkb_variant" "de"
[ 10.548] (II) config/udev: Adding input device Video Bus (/dev/input/event15)
[ 10.548] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 10.548] (II) Using input driver 'evdev' for 'Video Bus'
[ 10.548] (**) Video Bus: always reports core events
[ 10.548] (**) evdev: Video Bus: Device: "/dev/input/event15"
[ 10.548] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 10.548] (--) evdev: Video Bus: Found keys
[ 10.548] (II) evdev: Video Bus: Configuring as keyboard
[ 10.548] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:10/LNXVIDEO:02/input/input15/event15"
[ 10.548] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 10.548] (**) Option "xkb_rules" "evdev"
[ 10.548] (**) Option "xkb_model" "evdev"
[ 10.548] (**) Option "xkb_layout" "ch"
[ 10.548] (**) Option "xkb_variant" "de"
[ 10.549] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 10.549] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10.549] (II) Using input driver 'evdev' for 'Power Button'
[ 10.549] (**) Power Button: always reports core events
[ 10.549] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 10.549] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 10.549] (--) evdev: Power Button: Found keys
[ 10.549] (II) evdev: Power Button: Configuring as keyboard
[ 10.549] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 10.549] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 10.549] (**) Option "xkb_rules" "evdev"
[ 10.549] (**) Option "xkb_model" "evdev"
[ 10.549] (**) Option "xkb_layout" "ch"
[ 10.549] (**) Option "xkb_variant" "de"
[ 10.549] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 10.549] (II) No input driver specified, ignoring this device.
[ 10.549] (II) This device may have been added with another device file.
[ 10.549] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 10.550] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event13)
[ 10.550] (II) No input driver specified, ignoring this device.
[ 10.550] (II) This device may have been added with another device file.
[ 10.550] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 10.550] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[ 10.550] (II) No input driver specified, ignoring this device.
[ 10.550] (II) This device may have been added with another device file.
[ 10.551] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event11)
[ 10.551] (II) No input driver specified, ignoring this device.
[ 10.551] (II) This device may have been added with another device file.
[ 10.551] (II) config/udev: Adding input device HDA Intel MID Front Headphone (/dev/input/event12)
[ 10.551] (II) No input driver specified, ignoring this device.
[ 10.551] (II) This device may have been added with another device file.
[ 10.552] (II) config/udev: Adding input device Acrox USB & PS/2 Mouse (/dev/input/event9)
[ 10.552] (**) Acrox USB & PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[ 10.552] (II) Using input driver 'evdev' for 'Acrox USB & PS/2 Mouse'
[ 10.552] (**) Acrox USB & PS/2 Mouse: always reports core events
[ 10.552] (**) evdev: Acrox USB & PS/2 Mouse: Device: "/dev/input/event9"
[ 10.552] (--) evdev: Acrox USB & PS/2 Mouse: Vendor 0xf62 Product 0x1001
[ 10.552] (--) evdev: Acrox USB & PS/2 Mouse: Found 9 mouse buttons
[ 10.552] (--) evdev: Acrox USB & PS/2 Mouse: Found scroll wheel(s)
[ 10.552] (--) evdev: Acrox USB & PS/2 Mouse: Found relative axes
[ 10.552] (--) evdev: Acrox USB & PS/2 Mouse: Found x and y relative axes
[ 10.552] (II) evdev: Acrox USB & PS/2 Mouse: Configuring as mouse
[ 10.552] (II) evdev: Acrox USB & PS/2 Mouse: Adding scrollwheel support
[ 10.552] (**) evdev: Acrox USB & PS/2 Mouse: YAxisMapping: buttons 4 and 5
[ 10.552] (**) evdev: Acrox USB & PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 10.552] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input9/event9"
[ 10.553] (II) XINPUT: Adding extended input device "Acrox USB & PS/2 Mouse" (type: MOUSE, id 10)
[ 10.553] (II) evdev: Acrox USB & PS/2 Mouse: initialized for relative axes.
[ 10.553] (**) Acrox USB & PS/2 Mouse: (accel) keeping acceleration scheme 1
[ 10.553] (**) Acrox USB & PS/2 Mouse: (accel) acceleration profile 0
[ 10.553] (**) Acrox USB & PS/2 Mouse: (accel) acceleration factor: 2.000
[ 10.553] (**) Acrox USB & PS/2 Mouse: (accel) acceleration threshold: 4
[ 10.554] (II) config/udev: Adding input device Acrox USB & PS/2 Mouse (/dev/input/mouse1)
[ 10.554] (II) No input driver specified, ignoring this device.
[ 10.554] (II) This device may have been added with another device file.
[ 10.554] (II) config/udev: Adding input device 2SF022 (/dev/input/event8)
[ 10.554] (**) 2SF022: Applying InputClass "evdev keyboard catchall"
[ 10.554] (II) Using input driver 'evdev' for '2SF022'
[ 10.554] (**) 2SF022: always reports core events
[ 10.554] (**) evdev: 2SF022: Device: "/dev/input/event8"
[ 10.554] (--) evdev: 2SF022: Vendor 0xbda Product 0x5801
[ 10.554] (--) evdev: 2SF022: Found keys
[ 10.555] (II) evdev: 2SF022: Configuring as keyboard
[ 10.555] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input8/event8"
[ 10.555] (II) XINPUT: Adding extended input device "2SF022" (type: KEYBOARD, id 11)
[ 10.555] (**) Option "xkb_rules" "evdev"
[ 10.555] (**) Option "xkb_model" "evdev"
[ 10.555] (**) Option "xkb_layout" "ch"
[ 10.555] (**) Option "xkb_variant" "de"
[ 10.556] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 10.556] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 10.556] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 10.556] (**) AT Translated Set 2 keyboard: always reports core events
[ 10.556] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 10.556] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 10.556] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 10.556] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 10.556] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 10.556] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 10.556] (**) Option "xkb_rules" "evdev"
[ 10.556] (**) Option "xkb_model" "evdev"
[ 10.556] (**) Option "xkb_layout" "ch"
[ 10.556] (**) Option "xkb_variant" "de"
[ 10.557] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[ 10.557] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 10.557] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 10.557] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 10.557] (II) LoadModule: "synaptics"
[ 10.557] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 10.705] (II) Module synaptics: vendor="X.Org Foundation"
[ 10.705] compiled for 1.13.1, module version = 1.6.2
[ 10.705] Module class: X.Org XInput Driver
[ 10.705] ABI class: X.Org XInput driver, version 18.0
[ 10.705] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 10.705] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 10.705] (**) Option "Device" "/dev/input/event7"
[ 10.720] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 10.720] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 10.720] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5672
[ 10.720] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4550
[ 10.720] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 10.720] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 10.720] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 10.720] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 10.720] (**) Option "TapButton1" "1"
[ 10.720] (**) Option "TapButton2" "2"
[ 10.720] (**) Option "TapButton3" "3"
[ 10.720] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 10.720] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 10.720] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 10.726] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
[ 10.727] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 10.727] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 10.727] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 10.727] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038
[ 10.727] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 10.727] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 10.727] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 10.727] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 10.727] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 10.728] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 10.728] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 10.728] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event6)
[ 10.728] (II) No input driver specified, ignoring this device.
[ 10.728] (II) This device may have been added with another device file.
[ 10.729] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[ 10.729] (II) No input driver specified, ignoring this device.
[ 10.729] (II) This device may have been added with another device file.
[ 10.729] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 10.729] (II) No input driver specified, ignoring this device.
[ 10.729] (II) This device may have been added with another device file.
[ 10.730] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event5)
[ 10.730] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 10.731] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 10.731] (**) HP WMI hotkeys: always reports core events
[ 10.731] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event5"
[ 10.731] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[ 10.731] (--) evdev: HP WMI hotkeys: Found keys
[ 10.731] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[ 10.731] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[ 10.731] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 14)
[ 10.731] (**) Option "xkb_rules" "evdev"
[ 10.731] (**) Option "xkb_model" "evdev"
[ 10.731] (**) Option "xkb_layout" "ch"
[ 10.731] (**) Option "xkb_variant" "de"
Between why I installed the mentioned packages was, cause I'v seen these log entries in the Xorg.0.log:
(EE) Failed to load module "xxxx" (module does not exist, 0)
Can somebody explain what happens here.

Connect 6800 printer to new router

I have searched all the HP pages and this forum and haven't found an answer that works. I have a Deskjet 6840 printer and just had to buy a new router (linksys N750) and cannot connect the printer via wireless.
With this model I cannot use the setup disk because it is 2 or 3 Windows OS systems old. I am able to connect the printer to the router via ethernet cable, and can get to the printer app screen on my PC via the IP address the printer gives me. When I try to set up the wireless that way, it allows me through all the steps. But it still won't connect.
Also, yes to the following: Drivers are up to date, router is working with every other device, the SSID and key I'm using are correct.
Can someone please tell me the steps to do this correctly? If my printer has now become obsolete, please break it to me gently.
This question was solved.
View Solution.

Thoughts:
You might try assigning a static IP address for the printer at the router.
If you are using MAC filtering on the router to protect your network, make sure the printer's MAC address is added to the "allow" list in the Wireless setup.
Try moving the router - as little as a few inches may help; remember that Wireless "g" is susceptible to interference.
Make sure the router is set to respond to 801.11g -- as far as I know, all routers do this by default; it does not hurt to check the setup.
There is such a thing as "too close": make sure the router and the printer are at least 1.5 meters apart (about three feet).
Make sure you install the Update for the network reliability (from Category "Update"):
Windows 7 Critical Update to enhance reliability of network connection
Take a look at this Guide: Printer Does Not Maintain Wireless Connection
Take a look at your printer manual, Chapter 11.2 "Wireless communications": HP Deskjet 6800 series printer
Click the Kudos Star!
It is a great “Thank You” for the Experts who offer to help!
Kind Regards,
Dragon-Fur

Hp pavalion g6 compatable with windows 8

is my pavalion g6 series compatable with windows 8 its a 64bit system

Hi,
Microsoft has a tool which is similar to Windows 7 Advisor for Windows 8 called Windows 8 Upgrade Assisstant . Please download the Assisstant and run on your machine:
http://windows.microsoft.com/en-US/windows-8/upgrade-to-windows-8
Please also read this:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03451712
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

MY CISCO 6800 IA CAN NOT JOIN TO THE PARENT

Hello
I have a 6807XL with VS-SUP2T-10G, and the 10 Gbps Line Card WS-X6816-10GE, when I tried to provision the join of the 6800IA, I got theses errors.
CORE(config)#interface tengigabitethernet 1/1/1
CORE(config-if)#switchport mode fex-fabric
Command rejected: Mode fex fabric not allowed on non FEX capable slot
CORE(config-if)#channel-group 1 mode on
Command rejected (Port-channel1, Te1/1/1): Cannot be part of bundle, Non FEX Capable Slot
What should be the solution for it??
Regards
Rafael Barba

Hi,
Does your system meet all the requirement for FEX?
Q. What are the different components of the Instant Access solution?
A. The Instant Access solution requires new Cisco Catalyst 6800ia Instant Access clients and Cisco Catalyst 6500 or 6800 Series Switches (Instant Access parents) with Supervisor Engine 2T and WS-X6904-40G-2T line cards. Instant Access requires Cisco Catalyst 6500 or 6800 Series Switches configured for Virtual Switching System (VSS) mode, and we recommended having a pair of switches to provide the maximum level of redundancy and load balancing. Note: In networks where a pair of Cisco Catalyst 6500/6800 is not available, a single Cisco Catalyst 6500/6800 switch may be used when configured for VSS mode.
Link:
http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-6800ia-switch/qa_c67-728684.html
HTH

Gigabyte GA-8I945P-G + MSI Geforce 6800 GTO 256 PCE

My old MSI board went pop, i have sent it back to be replaced but will take a week or so, i purchased a new Gigabyte board GA-81945P-G and a new MSI Geforce 6800 GTO 256 PCE, the framerate i get is pityfull, i have checked everything in the bios, upgraded and downgraded drivers, Intel chipset drivers and everything i can think off, i read that this card is a properatry card and not ment for standard PC use, is this true ? does anyone else have or know of this issue and a fix or a resolve Please Please.
Mark

MarkJames,
It took a lot of digging though all that info but I found it in the end:
Resource Share Device Description
DMA 02 Exclusive Standard floppy disk controller
DMA 04 Exclusive Direct memory access controller
IRQ 00 Exclusive System timer
IRQ 01 Exclusive Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
IRQ 03 Exclusive Communications Port (COM2)
IRQ 04 Exclusive Communications Port (COM1)
IRQ 06 Exclusive Standard floppy disk controller
IRQ 08 Exclusive System CMOS/real time clock
IRQ 09 Shared Microsoft ACPI-Compliant System
IRQ 11 Shared Intel(R) 82801G (ICH7 Family) SMBus Controller - 27DA
IRQ 12 Exclusive Microsoft PS/2 Port Mouse (IntelliPoint)
IRQ 13 Exclusive Numeric data processor
IRQ 14 Exclusive Primary IDE Channel
IRQ 15 Exclusive Secondary IDE Channel
IRQ 16 Shared Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB
IRQ 16 Shared Intel(R) 82801G (ICH7 Family) PCI Express Root Port - 27D0
IRQ 16 Shared Intel(R) 945G/P PCI Express Root Port - 2771
IRQ 16 Shared Microsoft UAA Bus Driver for High Definition Audio
IRQ 16 Shared NVIDIA GeForce 6800 Series GPU
IRQ 18 Shared Broadcom NetLink (TM) Gigabit Ethernet
IRQ 18 Shared Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA
IRQ 18 Shared Intel(R) 82801G (ICH7 Family) PCI Express Root Port - 27D4
IRQ 19 Shared Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9
IRQ 19 Shared Intel(R) 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller - 27C0
IRQ 23 Shared Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8
IRQ 23 Shared Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC
I really hate the way Intel bunches the IRQs together. If that Boardcom a PCI Card?
Take Care,
Richard

NVidia GeForce - NX 6800 TD128

I just got a brand new MSI gforce 6800 and I can't get it working.
It shows garbage during bios init., differently colored numbers and
it doesn't seem to ever get past the init, or maybe I just can't see it.
I flashed the mobo's bios to the latest version ( asus a7v 600 ), but
that didn't make any difference. does anyone have the same combo
of board ( or chipset via 600 ) and 6800 series ? I got NX6800 TD128.
thanx for your replies.

Hi,
I've found the solution to the problem where the NX6800 non ultra was showing artifacts in bootup and in windows, and also locking up and flickering the display.
I read a lot of posts in this and other forums and its not really my own merit, but since I am in the dominican republic and rma'ing the card is not viable for me, I just deceided to go on and try.
**** Will void the warranty in your card ****
- Remove the heatsink of the card. For that you must unscrew from the back of the card. There are 4 screws that are different from the rest, the ones in the center. So don't mix them with the other ones.
- With a business card, credit card, plain screwdriver, remove the heat transfer patches from the heatsink. They should be a pink glue like stuff.
- With the business card (don't use a screwdriver), remove the thermal paste off the cpu.
- Once it's clean, you have to put some (preferrably good brand) thermal paste on top of the memory chips and the CPU chip. Not too much, not too little. Then spred it uniformly so it covers every memory chip and the cpu.
- Don't worry if you spill it on top of other parts of the card since thermal paste doesn't conduct electricity.
- Put the heatsink again and screw it. This time apply a bit more of force to the screews so It's well tightened.
- Then try the card.
It worked flawlessly for me.
I tested in a total of 4 machines before doing this, all had the same problem. After doing the modification, i tried it in one of the test machines, and in my current one, specs:
Athlon 64 3200+
MSI KT8 Neo
1Gb 400mhz Kingston DDR
2x WD Raptors in SATA Raid 1
Sound Blaster Live!
Thermaltake 520Watt PSU
Temps are now about 50-60 celsius at gameplay (doom3)
I can't post the temps before that, since I couldn't get any game to run, either windows. Only safe mode and VGA mode.
Hope this helps.

NF3 & 6800(series) compatibility ???

Similar Messages

Maybe you are looking for