NF750-G55 - Does not detect usb mouse (have to plugin after boot into Windows)

Topic says it all...
Mouse is Microsoft Habu, has been working in my old system just fine (ASUS M2N32-SLI DELUXE). The only usb items plugged in are the mouse and my Logitech G11 Keyboard.
I just upgraded my old rig to what you see in my signature, my mouse will not get detected unless I replug it in after windows has started.
During boot after initializing usb controller it says Found: 1 Keyboard and 1 Hub
I have tried the following but with no successful results:
PS2 Keyboard with mouse (mouse behaves the save)
Mouse w/usb->ps2 adapter (mouse lights up but doesn't do anything in windows)
Mouse plugged into every different port on the MOBO, D-Bracket, front panel usb or even into keyboard
Different mouse (boot says Found: 1 Keyboard, 1 Mouse, 1 Hub) and this mouse works all the time
USB Legacy On/Off inside bios
I also have a USB powered hard drive (http://www.simpletech.com/products/storage/simpledrive-mini/red-wine-250gb.php) that when plugged into the motherboard was making a beeping sound but I can't find any information on what that means (if anything)
Any ideas?

Quote
I just upgraded my old rig to what you see in my signature, my mouse will not get detected unless I replug it in after windows has started.
I had a similar problem with a couple of different boards, but with a Razer Copperhead mouse. I ended up just buying a new mouse (PS/2 type).

Similar Messages

Have to restore OS X.9.1 after booting into Windows 7 on Bootcamp

I am having an odd problem--whenever I boot into Windows 7 on bootcamp, when I then boot into Mac OS X.9.1, I have to restore the disk from Time Machine. This has never happened before, but now has happened twice in a row. It takes hours for the Restore function to restore everything. Anyone have any idea as to why this is happening. My MacPro dates to 2010. Thanks.

Windows is a guest on your Mac. If you use Windows tools to change the partition Map, or the size of any partition, all Mac OS X partition information is trashed, and you will need to restore it before proceeding.
Otherwise, you should be able to hold down Alt/Option key at Startup, and select your Mac OS X Volume to boot from (after several minutes of discovering what Volumes are present).

OSX ni-daqmx base does not detect USB-6216

USB-6216 is not detected on macbook pro retina late 2012 with NIDAQMX base installed even though the board is listed as supported.
Other boards (i.e. USB-6008) work. The 6216 works prefectly using win7 in a virtual machine on the same macbook; when the wirtual machine is on max asks whe the borad has to be connected and answering win TWO devices are connected to win (i.e. Firmware loader and 6216)
If the virtual machine is off nothing is asked, however, when 6008 is connected its led starts blinking, while nothing happens on the 6216.
A listing of the USB devices in the case of 6216 shows:
USB Hi-Speed Bus:
      Host Controller Location: Built-in USB
      Host Controller Driver: AppleUSBEHCI
      PCI Device ID: 0x1e2d
      PCI Revision ID: 0x0004
      PCI Vendor ID: 0x8086
      Bus Number: 0x1a
        Hub:
          Product ID: 0x0024
          Vendor ID: 0x8087 (Intel Corporation)
          Version: 0.00
          Speed: Up to 480 Mb/sec
          Location ID: 0x1a100000 / 2
          Current Available (mA): 500
          Current Required (mA): 0
          Sleep current (mA): 0
            Vendor-Specific Device:
              Product ID: 0x7269
              Vendor ID: 0x3923 (National Instruments)
              Version: 0.00
              Speed: Up to 480 Mb/sec
              Location ID: 0x1a120000 / 4
              Current Available (mA): 500
              Current Required (mA): 100
while in the case of 6008 shows
USB 3.0 Hi-Speed Bus:
      Host Controller Location: Built-in USB
      Host Controller Driver: AppleUSBXHCI
      PCI Device ID: 0x1e31
      PCI Revision ID: 0x0004
      PCI Vendor ID: 0x8086
      Bus Number: 0x14
        NI USB-6008:
          Product ID: 0x717a
          Vendor ID: 0x3923 (National Instruments)
          Version: 1.03
          Serial Number: 0130C6E2
          Speed: Up to 12 Mb/sec
          Manufacturer: National Instruments
          Location ID: 0x14200000 / 17
          Current Available (mA): 500
          Current Required (mA): 500
Anyone may help?
Thanks

Dear Cindy,
many thanks for your replay. I think it will be quite useful.
I should have the last driver revision (downloade one week ago...) and the board is a screw type. I have not checked it on another mac, but I will try to find one.
The part on the lsdaq is the most interesting for me: my lsdaq shows no boards at all (it shows something similar if I connect a 6008 board so it is working), but the mac detects an USB device (listed as vendor specific) as:
Vendor-Specific Device:
              Product ID: 0x7269
              Vendor ID: 0x3923 (National Instruments)
              Version: 0.00
              Speed: Up to 480 Mb/sec
              Location ID: 0x1d110000 / 6
              Current Available (mA): 500
              Current Required (mA): 100
As you see the product id is different. I suspect the problem is in the board firmware: when I connect the board and the win virtual machine is on, parellels asks me if I want to route the board to win. If I say yes after few seconds it asks if I want to route a second device which is labeled as 6216. It seem the board starts presenting one device and then it 'boots' a second device only after some driver operation.
May I ask you to check the board firmware using FWUpdate.app located in /Application/NI-DAQMx Base/bin/ ?
I contacted NI and maybe this can help them. When did you buy the board? Can you read the product id on the back of your board?
Many thanks again
Marco

Torch 9810 does not detect USB connection

The USB menu - you know, with the 3 blue boxes ? - has topped coming up when I plug the cable into my BB Torch. I can't load or download anything because the stupid frickin thing doesn't know it's plugged in. Phone makes the little "doo-doop" noise when I plug the USB cable in, but menu does not come up. Battery charge indicator comes on when I plug into a wall outlet, and th ebattery recharges so I know the port works (it's a 2 month old RIM battery). I've tried all 6 USB ports on my computer, and 3 different USB cables - it's not that. I tried a shutdown/restart, didn't help. I did a hard crash/restart by pulling the battery, didn't work. I'm getting pretty gawdamm fed up. Anybody got any ideas?

Hi and Welcome to the Community!
It can be a Drivers Issue:
https://swdownloads.blackberry.com/Downloads/contactFormPreload.do?code=A8BAA56554F96369AB93E4F3BB06...
Or ti can be a Administrator issue, it can be a Fire Wall or Antivirus issue.
BlackBerry smartphone or BlackBerry Playbook tablet will not connect to a Windows based computer due to USB Power Management settings
http://www.blackberry.com/btsc/KB13331
Please Advise.
If it helped you, click like.
If my response has helped you, please click "Options" beside my post and mark it as solved.
Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.
Good luck and let us know!

Laptop Bios cannot detect new HDD but still able to boot into windows

I have a Pavilion Dv5 1010tu which the original HDD have died. So i bought a new Samsung 320GB Sata and install Windows 7 on it. After Windows installation finished successful, I manually restart the laptop without Windows setup disk and it stop at dos screen with the error message :
Boot device not found.
Please install an operating system on your hard disk.
Hard disk (3F0) ...
I check bios and it didn't show any hard drive but when i re-insert Windows setup disk and restart, it can boot in windows without any problem. How can i fix this issue? I already update Bios and run hard disk self test though Bios setup without failed but it still not recognize HDD
Edit: My original HDD was Hitachi 250GB Sata
Bios version F.21A

~if advanced mode is off turn it on~ It sound easy huh. I would like to ask How can I access to advanced mode in Bios of Hp laptop? It's impossible.
defective drive ??? It a newly purchased HDD and it run perfectly fine, i'm posting this message using the laptop i mention above with this HDD as the only hard drive and installed with Windows 7
Any other idea/ help will be very appreciated , please

I have tried several times to install Firefox. It simply does not function. I have used it many times before Windows 7. Any suggestions?

I have tried many times to install Firefox. It installs but will not connect to the internet. I have I.E. Opera and Chrome in use so it's not my connection. I have used Firefox many times in the past, why is it not working currently. I have Windows 7 as an operating system and running Norton 360.

https://discussions.apple.com/docs/DOC-6131

After sleep, retina MacBook Pro (Mid 2014) does not recognize usb connected mouse movement

After sleep, retina MacBook Pro (Mid 2014, on 10.9.4) does not recognize usb connected mouse movement. I have tried a generic usb mouse and my Razer Deathadder usb mouse. Both mice work before sleep; but after sleep, the computer no longer recognizes mouse movement while still recognizing the mouse buttons when pressed. Any idea why this is occurring?

Hello, chocotac0.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would recommend when experiencing this issue.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
OS X Mavericks: If a USB device isn’t working
http://support.apple.com/kb/PH13876
Cheers,
Jason H.

Just update iTunes to 10.6.0.40. Now does not detect my iPhone. Tried restart, different USB port. Now what?

Just updated iTunes to 10.6.0.40. Now it does not detect my iPhone (prompt says reconnect, could not detect). Tried restarting and different USB port. What next asside from system restore with my Windows 7.Cannot Sync or get photos. Have 3Gs with os4.

I removed iTunes completely, then reinstalled. Still not identifying phone. When iPhone connected, prompt says "iPhone detected, could not be identified properly. Unplug and try again." Still not working.
Tried by installing previous version of iTunes (10.5.0.142) which did worked. Would not open iTunes because it had been previously installed with a newer version.
Sucessfully reinstalled ver 10.6.0.40 again. Then tried again by removing iTunes, iCloud and QuickTime. Reinstalled iTunes 10.6.0.40 and same problem, detected iPhone but could not identify properly. What next?

My problem is that one of the USB ports and the device does not detect this and inactive but can not find how to reactivate.Help me please! greetings thanks!

Hello good evening, I have a MacBook Pro and my problem is that one of the USB ports and the device does not detect this and inactive but can not find how to reactivate.
Help me please! greetings thanks!

Do you have the Firefox new tab page but the actual sites are missing, or do you have some other page?
If you have some different page, try the quick fix in Fred McD's reply.
If the sites are missing, did you use the Reset feature? That will clear the storage associated with the new tab page. I'm not sure it's possible to recover from that; you probably need to rebuild your page from scratch as you browse.
For possible future reference, here is how to access the hidden setting for the page to display on new tabs:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''newtab''' and pause while the list is filtered
(3) Double-click the '''browser.newtab.url''' preference and enter your preferred page:
* ''Page thumbnails (default)'' => about:newtab
* ''Blank tab'' => about:blank
* ''Built-in Firefox home page'' => about:home
* ''Any other page'' => full URL to the page
Press Ctrl+t to open a new tab and verify that it worked. Fixed?
Some gotchas:
''If Firefox won't let you edit this setting:'' you may have something called SearchProtect on your system.
''If Firefox lets you save your change but ignores it:'' one of your extensions may be overriding it. You can review, disable, and/or remove extensions on the add-ons page:
"3-bar" menu button (or Tools menu) > Add-ons > ''in the left column click'' Extensions
''If the change works during your session, but at the next startup is back to an unwanted page:'' you might have a user.js file in your personal Firefox settings folder (your Firefox profile folder). This article describes how to track down and remove the file: [[How to fix preferences that won't save]].
Any luck?

I have mid 2011 mac mini and it does not detect my apple tv

It does not detect it or I dont know how to use airplay

What Mac OS X do you have? ICloud requires 10.7.2 or higher. Then the iCloud icon is in System Preferences.

Photo importer (12.0) does not detect my Android phone (OS X Mavericks) over USB

I am running Photoshop Elements 12.0 on OS X Mavericks. When I do, "File > Get Photos and Videos > From Camera or Card Reader", but it does not detect my Android device (Nexus 4, 4.2.2). On the Android side, I switch between Media Device (MTP) and Camera (PTP), refreshing the list, to no avail. OS X's Image Capture sees the files; Android's File Transfer utility does, too. I've tried multiple USB ports, but that doesn't help.
What's wrong?
Thanks in advance.

That is what I had to do, but I should be able to skip that extra step, especially because I like Photoshop Element's ability to verify the pictures and delete them directly from the source. If this really isn't possible directly from Photoshop Elements, then this issue is a fairly major oversight.

I have a hp mobile printer with Bluetooth and my 4s iPhone does not detect it what can I do to set this up

My iPhone 4s does not detect Bluetooth

bluetooth is just a interface like usb drivers are still required
and in the case of ios devices an app made by the printer maker
not sure if hp support their bluetooth printers on ios devices but if they do it's with an app you get in the app store
bluetooth is not airprint enabled

Arch does not detect /dev/sdb

HI everybody,
Like the title says, Arch does not detect a second SATA hard drive I have installed on my computer.
I've searched around Google and the forums and I've doesn't found any helpfull tip.
The Arch installation is fresh, I just made it tonight, and cfdisk (during the installation) had recogniced the drive.
I've posted this here because I'm new on Arch, coming from Ubuntu and Fedora distros and I feel like a real Newbie
Here's some outputs that may be useful:
sudo fdisk -l
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes, 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Identificador del disco: 0x8370a3d6
Disposit. Inicio Comienzo Fin Bloques Id Sistema
/dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT
/dev/sda2 206848 1435379711 717586432 7 HPFS/NTFS/exFAT
/dev/sda3 1435379712 1953525167 259072728 5 Extendida
/dev/sda5 1435379775 1437339641 979933+ 82 Linux swap / Solaris
/dev/sda6 * 1437339705 1827960116 195310206 83 Linux
/dev/sda7 1827960180 1953525167 62782494 83 Linux
ls -lat /dev/sd*
brw-rw---- 1 root disk 8, 2 feb 3 03:32 /dev/sda2
brw-rw---- 1 root disk 8, 7 feb 3 03:32 /dev/sda7
brw-rw---- 1 root disk 8, 5 feb 3 03:32 /dev/sda5
brw-rw---- 1 root disk 8, 6 feb 3 03:32 /dev/sda6
brw-rw---- 1 root disk 8, 1 feb 3 03:32 /dev/sda1
brw-rw---- 1 root disk 8, 3 feb 3 03:32 /dev/sda3
brw-rw---- 1 root disk 8, 0 feb 3 03:32 /dev/sda
lspci -k
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
Subsystem: Intel Corporation Device 0036
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02)
Kernel driver in use: pcieport
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: mei
00:16.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset PT IDER Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: ata_generic
00:16.3 Serial controller: Intel Corporation 5 Series/3400 Series Chipset KT Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: serial
00:19.0 Ethernet controller: Intel Corporation 82578DC Gigabit Network Connection (rev 06)
Subsystem: Intel Corporation Device 0037
Kernel driver in use: e1000e
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: snd_hda_intel
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: lpc_ich
00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: pata_acpi
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: i801_smbus
00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: pata_acpi
01:00.0 VGA compatible controller: NVIDIA Corporation GF114 [GeForce GTX 560 Ti] (rev a1)
Subsystem: Device 196e:0898
Kernel driver in use: nvidia
01:00.1 Audio device: NVIDIA Corporation GF114 HDMI Audio Controller (rev a1)
Subsystem: Device 196e:0898
Kernel driver in use: snd_hda_intel
3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
Subsystem: Intel Corporation Device 8086
3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
Subsystem: Intel Corporation Device 8086
3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
Subsystem: Intel Corporation Device 8086
3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
Subsystem: Intel Corporation Device 8086
3f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
Subsystem: Intel Corporation Device 8086
3f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
Subsystem: Intel Corporation Device 8086
Thanks for the help!

I had the drive connected to a eSATA port, but I pluged it to a ordinary SATA port, and the result is the same.
The configuration on the BIOS:
ATA/IDE Mode -> Native
Configure Storage as -> IDE
It doesn't show more valuable information except for the location of any drive on any SATA port.
dmesg output, it can be useful for someone:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.7.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Jan 28 10:03:32 CET 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d40a9225-bd6b-46b0-9e14-54b177499391 ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000df451fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df452000-0x00000000df494fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df495000-0x00000000df508fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000df509000-0x00000000df50afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df50b000-0x00000000df610fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000df611000-0x00000000df611fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df612000-0x00000000df612fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df613000-0x00000000df61afff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000df61b000-0x00000000df61bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df61c000-0x00000000df61dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000df61e000-0x00000000df625fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df626000-0x00000000df646fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000df647000-0x00000000df689fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df68a000-0x00000000df7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000021bffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: /DH55HC, BIOS TCIBX10H.86A.0048.2011.1206.1342 12/06/2011
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x21c000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 base 1FC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 21C000000 mask FFC000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: update [mem 0x1fc000000-0x1ffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fccd0-0x000fccdf] mapped at [ffff8800000fccd0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xdf7fffff]
[ 0.000000] [mem 0x00000000-0xdf7fffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xdf7fffff @ [mem 0x1fffb000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1fbffffff]
[ 0.000000] [mem 0x100000000-0x1fbffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x1fbffffff @ [mem 0xdf7fb000-0xdf7fffff]
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
[ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x21bffffff @ [mem 0x1fbffe000-0x1fbffffff]
[ 0.000000] RAMDISK: [mem 0x37a76000-0x37d32fff]
[ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 INTEL)
[ 0.000000] ACPI: XSDT 00000000df61ce18 00054 (v01 INTEL DH55HC 01072009 MSFT 00010013)
[ 0.000000] ACPI: FACP 00000000df61ad98 000F4 (v04 INTEL DH55HC 01072009 MSFT 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20120913/tbfadt-394)
[ 0.000000] ACPI BIOS Bug: Warning: 32/64X FACS address mismatch in FADT - 0xDF61BF40/0x00000000DF61BE40, using 32 (20120913/tbfadt-521)
[ 0.000000] ACPI: DSDT 00000000df613018 06B90 (v01 INTEL DH55HC 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000df61bf40 00040
[ 0.000000] ACPI: APIC 00000000df61af18 000CC (v02 INTEL DH55HC 01072009 MSFT 00010013)
[ 0.000000] ACPI: SSDT 00000000df61ac18 00102 (v01 INTEL DH55HC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 00000000df61df18 0003C (v01 INTEL DH55HC 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000df61de98 00038 (v01 INTEL DH55HC 01072009 AMI. 00000003)
[ 0.000000] ACPI: ASF! 00000000df61cc18 000A0 (v32 INTEL DH55HC 00000001 TFSM 000F4240)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021bffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21bffffff]
[ 0.000000] NODE_DATA [mem 0x21bffc000-0x21bffffff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880213600000-ffff88021b5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21bffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009bfff]
[ 0.000000] node 0: [mem 0x00100000-0xdf451fff]
[ 0.000000] node 0: [mem 0xdf509000-0xdf50afff]
[ 0.000000] node 0: [mem 0xdf611000-0xdf611fff]
[ 0.000000] node 0: [mem 0xdf68a000-0xdf7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x1fbffffff]
[ 0.000000] node 0: [mem 0x200000000-0x21bffffff]
[ 0.000000] On node 0 totalpages: 2061655
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3910 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 894475 pages, LIFO batch:31
[ 0.000000] Normal zone: 18176 pages used for memmap
[ 0.000000] Normal zone: 1128704 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 16 CPUs, 12 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000df452000 - 00000000df495000
[ 0.000000] PM: Registered nosave memory: 00000000df495000 - 00000000df509000
[ 0.000000] PM: Registered nosave memory: 00000000df50b000 - 00000000df611000
[ 0.000000] PM: Registered nosave memory: 00000000df612000 - 00000000df613000
[ 0.000000] PM: Registered nosave memory: 00000000df613000 - 00000000df61b000
[ 0.000000] PM: Registered nosave memory: 00000000df61b000 - 00000000df61c000
[ 0.000000] PM: Registered nosave memory: 00000000df61c000 - 00000000df61e000
[ 0.000000] PM: Registered nosave memory: 00000000df61e000 - 00000000df626000
[ 0.000000] PM: Registered nosave memory: 00000000df626000 - 00000000df647000
[ 0.000000] PM: Registered nosave memory: 00000000df647000 - 00000000df68a000
[ 0.000000] PM: Registered nosave memory: 00000000df800000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e4000000
[ 0.000000] PM: Registered nosave memory: 00000000e4000000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] PM: Registered nosave memory: 00000001fc000000 - 0000000200000000
[ 0.000000] e820: [mem 0xe4000000-0xfed1bfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021bc00000 s84608 r8192 d21888 u131072
[ 0.000000] pcpu-alloc: s84608 r8192 d21888 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2027089
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d40a9225-bd6b-46b0-9e14-54b177499391 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8033416k/8847360k available (4883k kernel code, 600740k absent, 213204k reserved, 4030k data, 812k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=16.
[ 0.000000] NR_IRQS:4352 nr_irqs:808 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 3324.877 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6652.82 BogoMIPS (lpj=11082923)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000034] Security Framework initialized
[ 0.000044] AppArmor: AppArmor disabled by boot time parameter
[ 0.000483] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002616] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003590] Mount-cache hash table entries: 256
[ 0.003783] Initializing cgroup subsys cpuacct
[ 0.003786] Initializing cgroup subsys memory
[ 0.003793] Initializing cgroup subsys devices
[ 0.003794] Initializing cgroup subsys freezer
[ 0.003796] Initializing cgroup subsys net_cls
[ 0.003797] Initializing cgroup subsys blkio
[ 0.003818] CPU: Physical Processor ID: 0
[ 0.003819] CPU: Processor Core ID: 0
[ 0.003824] mce: CPU supports 9 MCE banks
[ 0.003833] CPU0: Thermal monitoring enabled (TM1)
[ 0.003840] process: using mwait in idle threads
[ 0.003844] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
[ 0.003958] Freeing SMP alternatives: 16k freed
[ 0.004816] ACPI: Core revision 20120913
[ 0.007720] ftrace: allocating 18793 entries in 74 pages
[ 0.015109] Switched APIC routing to physical flat.
[ 0.015602] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.048500] smpboot: CPU0: Intel(R) Core(TM) i5 CPU 660 @ 3.33GHz (fam: 06, model: 25, stepping: 05)
[ 0.154172] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.154177] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.154178] ... version: 3
[ 0.154179] ... bit width: 48
[ 0.154180] ... generic registers: 4
[ 0.154181] ... value mask: 0000ffffffffffff
[ 0.154182] ... max period: 000000007fffffff
[ 0.154182] ... fixed-purpose events: 3
[ 0.154183] ... event mask: 000000070000000f
[ 0.190806] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.177468] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.227213] Brought up 4 CPUs
[ 0.227218] smpboot: Total of 4 processors activated (26609.30 BogoMIPS)
[ 0.229378] devtmpfs: initialized
[ 0.230458] PM: Registering ACPI NVS region [mem 0xdf452000-0xdf494fff] (274432 bytes)
[ 0.230462] PM: Registering ACPI NVS region [mem 0xdf612000-0xdf612fff] (4096 bytes)
[ 0.230463] PM: Registering ACPI NVS region [mem 0xdf61b000-0xdf61bfff] (4096 bytes)
[ 0.230464] PM: Registering ACPI NVS region [mem 0xdf61e000-0xdf625fff] (32768 bytes)
[ 0.230466] PM: Registering ACPI NVS region [mem 0xdf647000-0xdf689fff] (274432 bytes)
[ 0.231092] RTC time: 21:05:23, date: 02/03/13
[ 0.231127] NET: Registered protocol family 16
[ 0.231227] ACPI: bus type pci registered
[ 0.231289] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.231291] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.236542] PCI: Using configuration type 1 for base access
[ 0.236958] bio: create slab <bio-0> at 0
[ 0.237003] ACPI: Added _OSI(Module Device)
[ 0.237005] ACPI: Added _OSI(Processor Device)
[ 0.237006] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.237007] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.237812] ACPI: EC: Look up EC in DSDT
[ 0.238684] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.240605] ACPI: SSDT 00000000df612c18 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.240820] ACPI: Dynamic OEM Table Load:
[ 0.240821] ACPI: SSDT (null) 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.240837] ACPI BIOS Bug: Warning: Incorrect checksum in table [SSDT] - 0x3F, should be 0x1F (20120913/tbutils-324)
[ 0.240840] ACPI: SSDT 00000000df61bd18 00084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.241020] ACPI: Dynamic OEM Table Load:
[ 0.241021] ACPI: SSDT (null) 00084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.241360] ACPI: Interpreter enabled
[ 0.241363] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.241374] ACPI: Using IOAPIC for interrupt routing
[ 0.241528] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.244856] ACPI: No dock devices found.
[ 0.244859] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.244939] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.244985] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.245005] PCI host bridge to bus 0000:00
[ 0.245007] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.245009] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.245010] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.245011] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.245012] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
[ 0.245019] pci 0000:00:00.0: [8086:0040] type 00 class 0x060000
[ 0.245033] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.245049] pci 0000:00:01.0: [8086:0041] type 01 class 0x060400
[ 0.245073] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.245118] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.245149] pci 0000:00:16.0: reg 10: [mem 0xfa129000-0xfa12900f 64bit]
[ 0.245261] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.245285] pci 0000:00:16.2: [8086:3b66] type 00 class 0x010185
[ 0.245304] pci 0000:00:16.2: reg 10: [io 0xf150-0xf157]
[ 0.245314] pci 0000:00:16.2: reg 14: [io 0xf140-0xf143]
[ 0.245323] pci 0000:00:16.2: reg 18: [io 0xf130-0xf137]
[ 0.245334] pci 0000:00:16.2: reg 1c: [io 0xf120-0xf123]
[ 0.245346] pci 0000:00:16.2: reg 20: [io 0xf110-0xf11f]
[ 0.245430] pci 0000:00:16.3: [8086:3b67] type 00 class 0x070002
[ 0.245452] pci 0000:00:16.3: reg 10: [io 0xf100-0xf107]
[ 0.245463] pci 0000:00:16.3: reg 14: [mem 0xfa128000-0xfa128fff]
[ 0.245580] pci 0000:00:19.0: [8086:10f0] type 00 class 0x020000
[ 0.245601] pci 0000:00:19.0: reg 10: [mem 0xfa100000-0xfa11ffff]
[ 0.245610] pci 0000:00:19.0: reg 14: [mem 0xfa127000-0xfa127fff]
[ 0.245620] pci 0000:00:19.0: reg 18: [io 0xf020-0xf03f]
[ 0.245697] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.245723] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.245745] pci 0000:00:1a.0: reg 10: [mem 0xfa126000-0xfa1263ff]
[ 0.245840] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.245870] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.245887] pci 0000:00:1b.0: reg 10: [mem 0xfa120000-0xfa123fff 64bit]
[ 0.245970] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.246001] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.246022] pci 0000:00:1d.0: reg 10: [mem 0xfa125000-0xfa1253ff]
[ 0.246117] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.246141] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.246216] pci 0000:00:1f.0: [8086:3b06] type 00 class 0x060100
[ 0.246328] pci 0000:00:1f.2: [8086:3b20] type 00 class 0x01018f
[ 0.246347] pci 0000:00:1f.2: reg 10: [io 0xf0f0-0xf0f7]
[ 0.246357] pci 0000:00:1f.2: reg 14: [io 0xf0e0-0xf0e3]
[ 0.246366] pci 0000:00:1f.2: reg 18: [io 0xf0d0-0xf0d7]
[ 0.246376] pci 0000:00:1f.2: reg 1c: [io 0xf0c0-0xf0c3]
[ 0.246386] pci 0000:00:1f.2: reg 20: [io 0xf0b0-0xf0bf]
[ 0.246395] pci 0000:00:1f.2: reg 24: [io 0xf0a0-0xf0af]
[ 0.246454] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.246472] pci 0000:00:1f.3: reg 10: [mem 0xfa124000-0xfa1240ff 64bit]
[ 0.246498] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
[ 0.246538] pci 0000:00:1f.5: [8086:3b26] type 00 class 0x010185
[ 0.246557] pci 0000:00:1f.5: reg 10: [io 0xf090-0xf097]
[ 0.246567] pci 0000:00:1f.5: reg 14: [io 0xf080-0xf083]
[ 0.246576] pci 0000:00:1f.5: reg 18: [io 0xf070-0xf077]
[ 0.246586] pci 0000:00:1f.5: reg 1c: [io 0xf060-0xf063]
[ 0.246595] pci 0000:00:1f.5: reg 20: [io 0xf050-0xf05f]
[ 0.246605] pci 0000:00:1f.5: reg 24: [io 0xf040-0xf04f]
[ 0.246682] pci 0000:01:00.0: [10de:1200] type 00 class 0x030000
[ 0.246690] pci 0000:01:00.0: reg 10: [mem 0xf8000000-0xf9ffffff]
[ 0.246698] pci 0000:01:00.0: reg 14: [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.246706] pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf3ffffff 64bit pref]
[ 0.246711] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
[ 0.246717] pci 0000:01:00.0: reg 30: [mem 0xfa000000-0xfa07ffff pref]
[ 0.246758] pci 0000:01:00.1: [10de:0e0c] type 00 class 0x040300
[ 0.246765] pci 0000:01:00.1: reg 10: [mem 0xfa080000-0xfa083fff]
[ 0.246835] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.246838] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.246839] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfa0fffff]
[ 0.246842] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf3ffffff 64bit pref]
[ 0.246904] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[ 0.246915] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.246916] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.246917] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.246919] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
[ 0.246929] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.247023] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[ 0.247107] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.247197] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
[ 0.247198] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.250341] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.250370] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.250397] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.250425] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.250454] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.250484] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.250511] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.250542] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.250605] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.250606] vgaarb: loaded
[ 0.250607] vgaarb: bridge control possible 0000:01:00.0
[ 0.250627] PCI: Using ACPI for IRQ routing
[ 0.252814] PCI: Discovered peer bus 3f
[ 0.252815] PCI: root bus 3f: using default resources
[ 0.252815] PCI: Probing PCI hardware (bus 3f)
[ 0.252831] PCI host bridge to bus 0000:3f
[ 0.252833] pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
[ 0.252834] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.252836] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
[ 0.252840] pci 0000:3f:00.0: [8086:2c61] type 00 class 0x060000
[ 0.252855] pci 0000:3f:00.1: [8086:2d01] type 00 class 0x060000
[ 0.252869] pci 0000:3f:02.0: [8086:2d10] type 00 class 0x060000
[ 0.252882] pci 0000:3f:02.1: [8086:2d11] type 00 class 0x060000
[ 0.252894] pci 0000:3f:02.2: [8086:2d12] type 00 class 0x060000
[ 0.252906] pci 0000:3f:02.3: [8086:2d13] type 00 class 0x060000
[ 0.252926] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
[ 0.253005] PCI: pci_cache_line_size set to 64 bytes
[ 0.253052] e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff]
[ 0.253053] e820: reserve RAM buffer [mem 0xdf452000-0xdfffffff]
[ 0.253055] e820: reserve RAM buffer [mem 0xdf50b000-0xdfffffff]
[ 0.253056] e820: reserve RAM buffer [mem 0xdf612000-0xdfffffff]
[ 0.253058] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[ 0.253125] NetLabel: Initializing
[ 0.253126] NetLabel: domain hash size = 128
[ 0.253127] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.253137] NetLabel: unlabeled traffic allowed by default
[ 0.253153] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.253157] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.255164] Switching to clocksource hpet
[ 0.258533] pnp: PnP ACPI init
[ 0.258548] ACPI: bus type pnp registered
[ 0.258610] pnp 00:00: [bus 00-ff]
[ 0.258612] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.258614] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.258615] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.258616] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.258618] pnp 00:00: [mem 0x00000000 window]
[ 0.258619] pnp 00:00: [mem 0xe0000000-0xffffffff window]
[ 0.258649] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.258677] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.258678] pnp 00:01: [mem 0xe0000000-0xe3ffffff]
[ 0.258680] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[ 0.258681] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.258682] pnp 00:01: [mem 0xfee00000-0xfee0ffff]
[ 0.258714] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.258716] system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 0.258717] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.258719] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.258720] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.258723] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.258812] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.258814] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.258834] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.258995] pnp 00:03: [io 0x03f8-0x03ff]
[ 0.259007] pnp 00:03: [irq 4]
[ 0.259008] pnp 00:03: [dma 0 disabled]
[ 0.259046] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.259277] pnp 00:04: [io 0x0378-0x037f]
[ 0.259279] pnp 00:04: [io 0x0778-0x077f]
[ 0.259283] pnp 00:04: [irq 5]
[ 0.259284] pnp 00:04: [dma 3]
[ 0.259381] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.259389] pnp 00:05: [dma 4]
[ 0.259390] pnp 00:05: [io 0x0000-0x000f]
[ 0.259391] pnp 00:05: [io 0x0081-0x0083]
[ 0.259392] pnp 00:05: [io 0x0087]
[ 0.259394] pnp 00:05: [io 0x0089-0x008b]
[ 0.259395] pnp 00:05: [io 0x008f]
[ 0.259396] pnp 00:05: [io 0x00c0-0x00df]
[ 0.259407] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.259413] pnp 00:06: [io 0x0070-0x0071]
[ 0.259418] pnp 00:06: [irq 8]
[ 0.259431] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.259437] pnp 00:07: [io 0x0061]
[ 0.259449] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.259459] pnp 00:08: [io 0x0010-0x001f]
[ 0.259460] pnp 00:08: [io 0x0022-0x003f]
[ 0.259462] pnp 00:08: [io 0x0044-0x005f]
[ 0.259463] pnp 00:08: [io 0x0062-0x0063]
[ 0.259464] pnp 00:08: [io 0x0065-0x006f]
[ 0.259465] pnp 00:08: [io 0x0072-0x007f]
[ 0.259466] pnp 00:08: [io 0x0080]
[ 0.259467] pnp 00:08: [io 0x0084-0x0086]
[ 0.259468] pnp 00:08: [io 0x0088]
[ 0.259469] pnp 00:08: [io 0x008c-0x008e]
[ 0.259471] pnp 00:08: [io 0x0090-0x009f]
[ 0.259472] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.259473] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.259474] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.259500] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.259503] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.259508] pnp 00:09: [io 0x00f0-0x00ff]
[ 0.259513] pnp 00:09: [irq 13]
[ 0.259526] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.259621] pnp 00:0a: [io 0x0400-0x047f]
[ 0.259622] pnp 00:0a: [io 0x1180-0x119f]
[ 0.259623] pnp 00:0a: [io 0x0500-0x057f]
[ 0.259625] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.259626] pnp 00:0a: [mem 0xfec00000-0xfecfffff]
[ 0.259627] pnp 00:0a: [mem 0xfed08000-0xfed08fff]
[ 0.259628] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 0.259648] system 00:0a: [io 0x0400-0x047f] has been reserved
[ 0.259650] system 00:0a: [io 0x1180-0x119f] has been reserved
[ 0.259651] system 00:0a: [io 0x0500-0x057f] has been reserved
[ 0.259653] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.259654] system 00:0a: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.259656] system 00:0a: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.259658] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[ 0.259660] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.259783] pnp 00:0b: [mem 0xfed00000-0xfed003ff]
[ 0.259800] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.259892] pnp: PnP ACPI: found 12 devices
[ 0.259893] ACPI: ACPI bus type pnp unregistered
[ 0.266408] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.266411] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.266413] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfa0fffff]
[ 0.266415] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf3ffffff 64bit pref]
[ 0.266418] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 0.266444] pci 0000:00:1e.0: setting latency timer to 64
[ 0.266448] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.266449] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.266450] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.266452] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff]
[ 0.266453] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.266454] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfa0fffff]
[ 0.266456] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf3ffffff 64bit pref]
[ 0.266457] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.266459] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
[ 0.266460] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.266461] pci_bus 0000:02: resource 7 [mem 0xe0000000-0xffffffff]
[ 0.266463] pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
[ 0.266464] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.266492] NET: Registered protocol family 2
[ 0.266910] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.268783] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.269029] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.269063] TCP: reno registered
[ 0.269073] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.269110] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.269211] NET: Registered protocol family 1
[ 0.315053] pci 0000:01:00.0: Boot video device
[ 0.315082] PCI: CLS 64 bytes, default 64
[ 0.315125] Unpacking initramfs...
[ 0.353156] Freeing initrd memory: 2804k freed
[ 0.353546] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.353549] software IO TLB [mem 0xdb452000-0xdf451fff] (64MB) mapped at [ffff8800db452000-ffff8800df451fff]
[ 0.353859] audit: initializing netlink socket (disabled)
[ 0.353875] type=2000 audit(1359925523.249:1): initialized
[ 0.363018] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.364275] VFS: Disk quotas dquot_6.5.2
[ 0.364309] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.364442] msgmni has been set to 15695
[ 0.364641] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.364676] io scheduler noop registered
[ 0.364678] io scheduler deadline registered
[ 0.364713] io scheduler cfq registered (default)
[ 0.364792] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.364908] vesafb: mode is 1280x800x32, linelength=5120, pages=0
[ 0.364910] vesafb: scrolling: redraw
[ 0.364911] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.365255] vesafb: framebuffer at 0xf1000000, mapped to 0xffffc90005600000, using 4032k, total 4032k
[ 0.452482] Console: switching to colour frame buffer device 160x50
[ 0.539642] fb0: VESA VGA frame buffer device
[ 0.539651] intel_idle: MWAIT substates: 0x1120
[ 0.539652] intel_idle: v0.4 model 0x25
[ 0.539653] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.539700] GHES: HEST is not enabled!
[ 0.539744] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.560441] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.581146] 0000:00:16.3: ttyS1 at I/O 0xf100 (irq = 17) is a 16550A
[ 0.581313] Linux agpgart interface v0.103
[ 0.581361] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.594604] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.594626] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.594726] mousedev: PS/2 mouse device common for all mice
[ 0.594777] rtc_cmos 00:06: RTC can wake from S4
[ 0.594939] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.594973] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.595018] cpuidle: using governor ladder
[ 0.595079] cpuidle: using governor menu
[ 0.595112] drop_monitor: Initializing network drop monitor service
[ 0.595172] TCP: cubic registered
[ 0.595242] NET: Registered protocol family 10
[ 0.595362] NET: Registered protocol family 17
[ 0.595369] Key type dns_resolver registered
[ 0.595570] PM: Hibernation image not present or could not be loaded.
[ 0.595576] registered taskstats version 1
[ 0.596120] Magic number: 1:939:94
[ 0.596267] rtc_cmos 00:06: setting system clock to 2013-02-03 21:05:24 UTC (1359925524)
[ 0.597300] Freeing unused kernel memory: 812k freed
[ 0.597412] Write protecting the kernel read-only data: 8192k
[ 0.599884] Freeing unused kernel memory: 1248k freed
[ 0.601056] Freeing unused kernel memory: 476k freed
[ 0.606451] systemd-udevd[57]: starting version 197
[ 0.624469] SCSI subsystem initialized
[ 0.625159] ACPI: bus type usb registered
[ 0.625179] usbcore: registered new interface driver usbfs
[ 0.625187] usbcore: registered new interface driver hub
[ 0.625823] ACPI: bus type scsi registered
[ 0.625865] usbcore: registered new device driver usb
[ 0.625875] libata version 3.00 loaded.
[ 0.626068] pata_acpi 0000:00:16.2: setting latency timer to 64
[ 0.626104] pata_acpi 0000:00:1f.2: setting latency timer to 64
[ 0.626423] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.627806] scsi0 : pata_acpi
[ 0.628229] scsi1 : pata_acpi
[ 0.628555] ata1: PATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0b0 irq 19
[ 0.628557] ata2: PATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf0b8 irq 19
[ 0.628587] pata_acpi 0000:00:1f.5: setting latency timer to 64
[ 0.633159] scsi2 : pata_acpi
[ 0.633673] scsi3 : pata_acpi
[ 0.634669] ata3: PATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf050 irq 19
[ 0.634672] ata4: PATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf058 irq 19
[ 0.634727] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.634732] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 0.634739] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.634756] ehci_hcd 0000:00:1a.0: debug port 2
[ 0.638765] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 0.638798] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfa126000
[ 0.647329] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.647467] hub 1-0:1.0: USB hub found
[ 0.647471] hub 1-0:1.0: 2 ports detected
[ 0.647542] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.647545] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 0.647549] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.647560] ehci_hcd 0000:00:1d.0: debug port 2
[ 0.651548] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 0.651561] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfa125000
[ 0.660694] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.660928] hub 2-0:1.0: USB hub found
[ 0.660932] hub 2-0:1.0: 2 ports detected
[ 0.801747] ata1.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 0.801750] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.802139] ata1.01: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
[ 0.802144] ata1.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.803079] ata1.01: no PIO support
[ 0.953074] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.076944] hub 1-1:1.0: USB hub found
[ 1.077141] hub 1-1:1.0: 6 ports detected
[ 1.182336] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.306076] hub 2-1:1.0: USB hub found
[ 1.306284] hub 2-1:1.0: 8 ports detected
[ 1.351793] tsc: Refined TSC clocksource calibration: 3325.000 MHz
[ 1.351799] Switching to clocksource tsc
[ 1.385166] usb 1-1.2: new low-speed USB device number 3 using ehci_hcd
[ 1.541306] usb 1-1.4: new low-speed USB device number 4 using ehci_hcd
[ 5.935629] ata1.01: no PIO support
[ 5.935631] ata1.01: disabled
[ 5.951315] ata1.00: configured for UDMA/100
[ 5.951734] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 6.120495] ata2.01: ATAPI: TSSTcorp CDDVDW SH-222AB, SB00, max UDMA/100
[ 6.120503] ata2.01: no PIO support
[ 11.257635] ata2.01: no PIO support
[ 11.257639] ata2.01: disabled
[ 11.421879] ata_generic 0000:00:16.2: setting latency timer to 64
[ 11.422293] scsi4 : ata_generic
[ 11.422400] scsi5 : ata_generic
[ 11.422428] ata5: PATA max UDMA/100 cmd 0xf150 ctl 0xf140 bmdma 0xf110 irq 18
[ 11.422430] ata6: PATA max UDMA/100 cmd 0xf130 ctl 0xf120 bmdma 0xf118 irq 18
[ 11.751474] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 11.751521] sd 0:0:0:0: [sda] Write Protect is off
[ 11.751523] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 11.751538] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 11.775078] usbcore: registered new interface driver usbhid
[ 11.775081] usbhid: USB HID core driver
[ 11.812772] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 11.813929] sd 0:0:0:0: [sda] Attached SCSI disk
[ 11.814854] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input0
[ 11.814908] hid-generic 0003:046D:C31B.0002: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1a.0-1.4/input0
[ 11.815047] input: Microsoft Microsoft® Comfort Mouse 4500 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1
[ 11.815422] microsoft 0003:045E:076C.0001: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® Comfort Mouse 4500] on usb-0000:00:1a.0-1.2/input0
[ 11.817407] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/input/input2
[ 11.817457] hid-generic 0003:046D:C31B.0003: input,hidraw2: USB HID v1.11 Device [Logitech Logitech USB Keyboard] on usb-0000:00:1a.0-1.4/input1
[ 12.388733] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 12.938667] systemd[1]: systemd 197 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 12.961471] systemd[1]: Set hostname to <archlinuxPC>.
[ 13.159056] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[ 13.159185] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 13.159221] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 13.159230] systemd[1]: Starting Remote File Systems.
[ 13.159238] systemd[1]: Reached target Remote File Systems.
[ 13.159244] systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
[ 13.159250] systemd[1]: Starting Delayed Shutdown Socket.
[ 13.159271] systemd[1]: Listening on Delayed Shutdown Socket.
[ 13.159277] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 13.159292] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 13.159298] systemd[1]: Starting Encrypted Volumes.
[ 13.159306] systemd[1]: Reached target Encrypted Volumes.
[ 13.159313] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 13.159334] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 13.159356] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 13.159431] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 13.159472] systemd[1]: Starting udev Kernel Socket.
[ 13.159488] systemd[1]: Listening on udev Kernel Socket.
[ 13.159519] systemd[1]: Starting udev Control Socket.
[ 13.159537] systemd[1]: Listening on udev Control Socket.
[ 13.159543] systemd[1]: Starting Swap.
[ 13.159550] systemd[1]: Reached target Swap.
[ 13.159556] systemd[1]: Starting Journal Socket.
[ 13.159589] systemd[1]: Listening on Journal Socket.
[ 13.159600] systemd[1]: Started File System Check on Root Device.
[ 13.159605] systemd[1]: Mounting Temporary Directory...
[ 13.191259] systemd[1]: Mounting Huge Pages File System...
[ 13.194730] systemd[1]: Starting udev Coldplug all Devices...
[ 13.214643] systemd[1]: Mounting POSIX Message Queue File System...
[ 13.231452] systemd[1]: Starting Apply Kernel Variables...
[ 13.240935] systemd[1]: Starting Setup Virtual Console...
[ 13.252572] systemd[1]: Started Load Kernel Modules.
[ 13.252592] systemd[1]: Mounted FUSE Control File System.
[ 13.252605] systemd[1]: Mounting Debug File System...
[ 13.254667] systemd[1]: Mounting Configuration File System...
[ 13.274425] systemd[1]: Starting udev Kernel Device Manager...
[ 13.305170] systemd[1]: Started Set Up Additional Binary Formats.
[ 13.305183] systemd[1]: Starting Journal Service...
[ 13.307733] systemd[1]: Started Journal Service.
[ 13.307763] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 13.726755] EXT4-fs (sda7): re-mounted. Opts: data=ordered
[ 13.750053] systemd-udevd[127]: starting version 197
[ 13.921301] systemd-journald[128]: Received SIGUSR1
[ 14.418021] systemd-journald[128]: File /var/log/journal/9dcd8569a2b14c4f9f53ce4406e57e79/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 14.792337] snd_hda_intel 0000:00:1b.0: irq 41 for MSI/MSI-X
[ 14.877515] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 14.893383] e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
[ 14.893385] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
[ 14.953180] parport_pc 00:04: reported by Plug and Play ACPI
[ 5.951986] ACPI: Invalid Power Resource to register!
[ 14.953337] parport0: PC-style at 0x378
[ 14.953338] (0x778), irq 5, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 15.027758] ppdev: user-space parallel port driver
[ 15.059527] microcode: CPU0 sig=0x20655, pf=0x2, revision=0x3
[ 15.068458] microcode: CPU1 sig=0x20655, pf=0x2, revision=0x3
[ 15.068852] microcode: CPU2 sig=0x20655, pf=0x2, revision=0x3
[ 15.069229] microcode: CPU3 sig=0x20655, pf=0x2, revision=0x3
[ 15.069558] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 15.124825] ACPI: Requesting acpi_cpufreq
[ 15.127274] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 15.127327] ACPI: Power Button [PWRB]
[ 15.127369] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 15.127425] ACPI: Power Button [PWRF]
[ 15.131162] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 15.139560] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 15.139628] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 15.139728] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 15.139785] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 15.139838] input: HDA Intel MID Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 15.140068] hda_intel: Disabling MSI
[ 15.140077] hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
[ 15.140087] e1000e 0000:00:19.0: setting latency timer to 64
[ 15.140156] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 15.140194] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 15.310985] nvidia: module license 'NVIDIA' taints kernel.
[ 15.310990] Disabling lock debugging due to kernel taint
[ 15.335816] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) e0:69:95:a2:d5:75
[ 15.335819] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 15.335893] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 9, PBA No: FFFFFF-0FF
[ 15.335992] mei 0000:00:16.0: setting latency timer to 64
[ 15.336076] mei 0000:00:16.0: irq 43 for MSI/MSI-X
[ 15.336761] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.SBRG.AY34 1 (20120913/utaddress-251)
[ 15.336765] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.342893] gpio_ich: GPIO from 180 to 255 on gpio_ich
[ 15.384478] iTCO_vendor_support: vendor-support=0
[ 15.392227] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 15.392289] iTCO_wdt: Found a H55 TCO device (Version=2, TCOBASE=0x0460)
[ 15.392384] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 15.468027] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 15.570266] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 15.570395] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.762514] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 16.022159] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[ 16.022316] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 16.022456] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 16.022589] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 16.023047] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 16.023288] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 313.18 Wed Jan 9 17:02:09 PST 2013
[ 18.372541] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
[ 18.372591] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 34.993202] NVRM: Your system is not currently configured to drive a VGA console
[ 34.993205] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 34.993206] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 34.993207] NVRM: drivers including, but not limited to, vesafb, may result in
[ 34.993208] NVRM: corruption and stability problems, and is not supported.
[ 44.447627] EXT4-fs (sda7): re-mounted. Opts: data=ordered,commit=0
[ 98.242223] fuse init (API version 7.20)
Thanks everyone for every reply, I'm learning more GNU/Linux in two days than in two years as other Linux distro's user.

Hi; I updated my iTunes to the latest version (11.1.4.62), but it does not detect my iPhone 4s any more.

Hi,
I updated my iTunes to version 11.1.4.62, but it does not detect my iPhone 4s any more. I have tried the following ways but still did not work:
Rebooted the computer
Rebooted the iPhone
plugged and unplugged the USB cable multiple times and to various USB ports
Uninstalled and installed the i-Tunes
Signed out the iTunes and signed in again
my USB cable and ports are all ok
my ios version on iPhone is : 7.4.4
my laptop os is windows 8.1 and my processor is: Intel Core i7-3610QM @ 2.30 GHz
I appreciate your help.

I find this on another post and tried it. It WORKED. I had to modify to fit my situation but give it a try. Good luck.
Go to Windows 8.1 Control Panel.
Go to Hardware and Sound; Devices and Printers; Device Manager; Portable Devices (look for Apple IPad)
Right-click, then select properties on the menu list.
Under the "Driver" tab menu, confirm the update driver button is not greyed out. If the update driver button is grey and unselectable, you need to select and click "Change Settings" button located near the lower left corner.
Now you can click the "Driver" tab menu near the top, so you can see the "Update Driver" button.
Select "Update Driver".
Select and click "Browse my computer for driver software".
For Windows 8.1 64 bit, it should be located in the folder: C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.
Click Next, and let the driver re-install.
iTunes 11.1.4.62 should open automatically if your iphone is connected already.

HT1296 i just downloaded the latest version of itunes but now i cant zync my ipod. i tunes does not detect my ipod. ut just to work perfectly with the older version of itunes but not now. what is something i can do?

i just downloaded the latest version of itunes but i cant zync my iphone nor my ipod. it just to work perfectly with the older version of itunes but now itunes does not detect my ipod nor iphone. i have a windows pd and iwindows detects the iphone and ipod. what is something i can do to fix the problem??

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests

NF750-G55 - Does not detect usb mouse (have to plugin after boot into Windows)

Similar Messages

Maybe you are looking for