NF750-G55

Hello,
My Specs:
Summary
      Operating System
         MS Windows 7 Ultimate 64-bit
      CPU
         AMD Phenom II X4 955   34 °C
         Deneb 45nm Technology
      RAM
         4.0GB Single-Channel DDR3 @ 733MHz (9-9-9-20)
      Motherboard
         MSI NF750-G55 (MS-7578) (CPU1)
      Graphics
         VA220E @ 1360x768
         NVIDIA GeForce 9600 GT (Microsoft Corporation - WDDM v1.1) (XFX Pine Group)
      Hard Drives
         147GB Western Digital WDC WD1500HLFS-01G6U1 ATA Device (IDE)   31 °C
         156GB Western Digital WDC WD1600AAJS-00V4A0 ATA Device (IDE)   32 °C
      Optical Drives
         RYJ NW1YJOXE SCSI CdRom Device
      Audio
         Realtek High Definition Audio
Operating System
   MS Windows 7 Ultimate 64-bit
   Installation Date: 17 July 2010, 23:47
   Serial Number: FJGCP-4DFJD-GJY49-VJBQ7-HYRR2
CPU
      AMD Phenom II X4 955
         Cores   4
         Threads   4
         Name   AMD Phenom II X4 955
         Code Name   Deneb
         Package   Socket AM3 (938)
         Technology   45nm
         Specification   AMD Phenom(tm) II X4 955 Processor
         Family   F
         Extended Family   10
         Model   4
         Extended Model   4
         Stepping   3
         Revision   RB-C3
         Instructions   MMX (+), 3DNow! (+), SSE, SSE2, SSE3, SSE4A, x86-64
         Bus Speed   220.0 MHz
         Rated Bus Speed   2200.0 MHz
         Stock Bus Speed   200 MHz
         Average Temperature   34 °C
            Caches
               L1 Data Cache Size   4 x 64 KBytes
               L1 Instructions Cache Size   4 x 64 KBytes
               L2 Unified Cache Size   4 x 512 KBytes
               L3 Unified Cache Size   6144 KBytes
            Core 0
               Core Speed   3519.8 MHz
               Multiplier   x 16.0
               Bus Speed   220.0 MHz
               Rated Bus Speed   2200.0 MHz
               Temperature   34 °C
                  Thread 1
                     APIC ID   0
            Core 1
               Core Speed   3519.8 MHz
               Multiplier   x 16.0
               Bus Speed   220.0 MHz
               Rated Bus Speed   2200.0 MHz
               Temperature   34 °C
                  Thread 1
                     APIC ID   1
            Core 2
               Core Speed   3519.8 MHz
               Multiplier   x 16.0
               Bus Speed   220.0 MHz
               Rated Bus Speed   2200.0 MHz
               Temperature   33 °C
                  Thread 1
                     APIC ID   2
            Core 3
               Core Speed   3519.8 MHz
               Multiplier   x 16.0
               Bus Speed   220.0 MHz
               Rated Bus Speed   2200.0 MHz
               Temperature   34 °C
                  Thread 1
                     APIC ID   3
RAM
      Memory slots
         Total memory slots   4
         Used memory slots   1
         Free memory slots   3
      Memory
         Type   DDR3
         Size   4096 MBytes
         Channels #   Single
         DRAM Frequency   733.3 MHz
         CAS# Latency (CL)   9 clocks
         RAS# to CAS# Delay (tRCD)   9 clocks
         RAS# Precharge (tRP)   9 clocks
         Cycle Time (tRAS)   20 clocks
         Bank Cycle Time (tR?)   33 clocks
         Command Rate (CR)   1T
      SPD
         Number Of SPD Modules   1
            Slot #1
               Type   DDR3
               Size   4096 MBytes
               Manufacturer   OCZ
               Max Bandwidth   PC3-10700H (667 MHz)
               Part Number   OCZ3G1333LV4G     
               SPD Ext.   EPP
                  JEDEC #5
                     Frequency   666.7 MHz
                     CAS# Latency   9.0
                     RAS# To CAS#   10
                     RAS# Precharge   10
                     tRAS   21
                     tRC   34
                     Voltage   1.500 V
                  JEDEC #4
                     Frequency   592.6 MHz
                     CAS# Latency   8.0
                     RAS# To CAS#   8
                     RAS# Precharge   8
                     tRAS   18
                     tRC   30
                     Voltage   1.500 V
                  JEDEC #3
                     Frequency   518.5 MHz
                     CAS# Latency   7.0
                     RAS# To CAS#   7
                     RAS# Precharge   7
                     tRAS   16
                     tRC   26
                     Voltage   1.500 V
                  JEDEC #2
                     Frequency   444.4 MHz
                     CAS# Latency   6.0
                     RAS# To CAS#   7
                     RAS# Precharge   7
                     tRAS   14
                     tRC   23
                     Voltage   1.500 V
                  JEDEC #1
                     Frequency   370.4 MHz
                     CAS# Latency   5.0
                     RAS# To CAS#   5
                     RAS# Precharge   5
                     tRAS   12
                     tRC   19
                     Voltage   1.500 V
Motherboard
   Manufacturer   MSI
   Model   NF750-G55 (MS-7578)
   Version   1.0
   Chipset Vendor   NVIDIA
   Chipset Model   nForce 740a SLI
   Chipset Revision   A2
   Southbridge Vendor   NVIDIA
   Southbridge Model   nForce 740a SLI MCP
   Southbridge Revision   A2
      BIOS
         Brand   American Megatrends Inc.
         Version   V1.2
         Date   09/24/2009
Graphics
      Monitor
         Name   VA220E on NVIDIA GeForce 9600 GT (Microsoft Corporation - WDDM v1.1)
         Current Resolution   1360x768 pixels
         Work Resolution   1360x728 pixels
         State   enabled, primary
         Monitor Width   1360
         Monitor Height   768
         Monitor BPP   32 bits per pixel
         Monitor Frequency   60 Hz
         Device   \\.\DISPLAY1\Monitor0
      NVIDIA GeForce 9600 GT (Microsoft Corporation - WDDM v1.1)
         GPU   G94
         Device ID   10DE-0622
         Revision   A2
         Subvendor   XFX Pine Group (1682)
         Technology   65 nm
         Die Size   240 nm?
         Transistors   505 M
         Release Date   Feb 21, 2008
         DirectX Support   10.0
         DirectX Shader Model   4.0
         OpenGL Support   3.0
         BIOS Version   Version 62.94.11.0.0
         ROPs   16
         Shaders   64 unified
         Memory Type   GDDR3
         Bus Width   256 Bit
Hard Drives
      WDC WD1500HLFS-01G6U1 ATA Device
         Manufacturer   Western Digital
         Form Factor   GB/2.5- to 3.5-inch backplane adapter
         Business Unit/Brand   Enterprise/WD VelociRaptor®
         Interface/Connector   SATA 3 Gb/s with 22-pin SATA connector/SATA 1.5 Gb/s with 22-pin SATA connector (Mobile)
         Interface   IDE
         Capacity   147GB
         Real size   150,039,945,216 bytes
            S.M.A.R.T
               01 Read Error Rate   200 (200 worst) Data 0000000000
               03 Spin-Up Time   203 (198) Data 0000000B09
               04 Start/Stop Count   100 (100) Data 0000000052
               05 Reallocated Sectors Count   200 (200) Data 0000000000
               07 Seek Error Rate   200 (200) Data 0000000000
               09 Power-On Hours (POH)   100 (100) Data 00000001D1
               0A Spin Retry Count   100 (253) Data 0000000000
               0B Recalibration Retries   100 (253) Data 0000000000
               0C Device Power Cycle Count   100 (100) Data 0000000052
               C0 Power-off Retract Count   200 (200) Data 0000000013
               C1 Load/Unload Cycle Count   200 (200) Data 0000000052
               C2 Temperature   116 (110) Data 000000001F
               C4 Reallocation Event Count   200 (200) Data 0000000000
               C5 Current Pending Sector Count   200 (200) Data 0000000000
               C6 Uncorrectable Sector Count   200 (200) Data 0000000000
               C8 Write Error Rate / Multi-Zone Error Rate   200 (200) Data 0000000000
               Temperature   31 °C
               Temperature Range   ok (less than 50 °C)
               Status   Good
            Partition 0
               Partition ID   Disk #0, Partition #0
               Size   992 KB
            Partition 1
               Partition ID   Disk #0, Partition #1
               Size   100 MB
            Partition 2
               Partition ID   Disk #0, Partition #2
               Disk Letter   C:
               File System   NTFS
               Volume Serial Number   30AD5362
               Size   140GB
               Used Space   55GB (40%)
               Free Space   85GB (60%)
            Partition 3
               Partition ID   Disk #0, Partition #3
               Size   248 KB
      WDC WD1600AAJS-00V4A0 ATA Device
         Manufacturer   Western Digital
         Form Factor   GB/3.5-inch
         Business Unit/Brand   Desktop/WD Caviar®
         RPM/Buffer Size or Attribute   7200 RPM with 8 MB cache
         Interface/Connector   SATA 3 Gb/s with 22-pin SATA connector/SATA 1.5 Gb/s with 22-pin SATA connector (Mobile)
         Interface   IDE
         Capacity   156GB
         Real size   160,041,885,696 bytes
            S.M.A.R.T
               01 Read Error Rate   200 (200 worst) Data 0000000000
               03 Spin-Up Time   145 (141) Data 0000000E95
               04 Start/Stop Count   100 (100) Data 0000000136
               05 Reallocated Sectors Count   200 (200) Data 0000000000
               07 Seek Error Rate   200 (200) Data 0000000000
               09 Power-On Hours (POH)   098 (098) Data 0000000738
               0A Spin Retry Count   100 (100) Data 0000000000
               0B Recalibration Retries   100 (100) Data 0000000000
               0C Device Power Cycle Count   100 (100) Data 00000000AF
               C0 Power-off Retract Count   200 (200) Data 0000000059
               C1 Load/Unload Cycle Count   200 (200) Data 00000000DC
               C2 Temperature   111 (104) Data 0000000020
               C4 Reallocation Event Count   200 (200) Data 0000000000
               C5 Current Pending Sector Count   200 (200) Data 0000000000
               C6 Uncorrectable Sector Count   200 (200) Data 0000000000
               C7 UltraDMA CRC Error Count   200 (200) Data 0000000000
               C8 Write Error Rate / Multi-Zone Error Rate   200 (200) Data 0000000000
               Temperature   32 °C
               Temperature Range   ok (less than 50 °C)
               Status   Good
            Partition 0
               Partition ID   Disk #1, Partition #0
               Disk Letter   D:
               File System   NTFS
               Volume Serial Number   D04EC439
               Size   99MB
               Used Space   94MB (95%)
               Free Space   5MB (5%)
            Partition 1
               Partition ID   Disk #1, Partition #1
               Disk Letter   E:
               File System   NTFS
               Volume Serial Number   D8500611
               Size   149GB
               Used Space   22.8GB (16%)
               Free Space   126GB (84%)
Optical Drives
      RYJ NW1YJOXE SCSI CdRom Device
         Media Type   DVD-ROM
         Name   RYJ NW1YJOXE SCSI CdRom Device
         Availability   Running/Full Power
         Capabilities   Random Access, Supports Removable Media
         Config Manager Error Code   Device is working properly
         Config Manager User Config   FALSE
         Drive   F:
         Media Loaded   FALSE
         SCSI Bus   0
         SCSI Logical Unit   0
         SCSI Port   4
         SCSI Target Id   0
         Status   OK
Audio
      Sound Cards
         Realtek High Definition Audio
         High Definition Audio Device
      Playback Device
         Speakers (Realtek High Definition Audio)
      Recording Device
         Microphone (Realtek High Definition Audio)
I pulled one of the OC switches down to overclock by 10% and it work fine and my phenon 955 went from 3.2 to 3.5, but when i try 15% or 20% by switching the other ones pc would not boot at all untill i cleared my cmos, I'm new to overclocking and i don't know much about it.. i got a HAD 922 case with lots of fans and i got a coolermaster v10 cpu cooler which works great. I really want to oc it up to 4.0ghz. Don't know whats going on or why it wouldn't let.. i remember when i tried doing 15% oc my pc turned on and said something about bootmgr and it being corrupt? nothing worked untill i turned it off and cleared cmos.. I don't know what it is that i need to do. I have a Ultra 750wat psu btw. Any help will be greatly appreciated

Your BSOD'ing during load because your cpu is too hot.... now that you've got 4Ghz to boot..back off the voltage (1 step down at a time) until you stay under 45*C.. If you go too low you wont be stable...if you go too high you'll overheat and crash. These chips don't like anything above 50*C.... hell I start to worry about stability at 45*C. AMD states the max (recommended) is 66*C. I say B.S. and just stay under 50*C to be safe.
Also... you will not be able to do 1800mhz ram w/ a 4Ghz CPU clock.... the IMC just isn't strong enough. You'd be much better off at 1333mhz and tightening up your timings a tad. If your looking for graphics performance... OC your NB and HT clocks. You'll gain 12-16 fps in Vantage upping your NB to 2800mhz and your HT to ~2500mhz while keeping the CPU cool and comfortable at ~3.8Ghz. (this is especially helpful if you ever plan on going SLI)

Similar Messages

  • New computer MSI NF750-G55

    Hello All,
    Just received a new shipment and the computer is not passing POST, Details as follows...
    (oops) AMD Phenom II x6 1090T
    MSI NF750-G55 BIOS default no software installed yet...
    GSkill 4x4GB DDR3 1333
    CoolMax 500w +3.3 30A +12v1 18A +12v2 16A -12v 1A 12v 380W
    On Board Video
    Kingston 128gb SSD and Sony Sata DVD R/W
    Getting post to the Checking vRam and it freezes, no input after that recognized.  Computer is new, I have tried with just 1 dimm installed (yes in the correct spot) and also with only the CPU, PSU, and keyboard connected.  All fail at that point.  Post code 008F reads at that point.
    Any additional info will be given at request.

    Check the BIOS chip, as you need at least BIOS 7578v13 for that CPU.
    If the board doesn't have that version, you will need a supported CPU to flash it.
    It may also be the memory you use, try 1 el-cheapo stick and see if it posts.
    And last, if you PSU is this one:
    http://www.newegg.com/Product/Product.aspx?Item=N82E16817159062&Tpk=CoolMax%20500w
    That piece of junk will not power your system, it's old rubbish.

  • NF750-G55 New Build Won't Boot to DVD

    I'm doing a rebuild of a system in which the old motherboard failed. This is only the second time I have done a build, so forgive any apparent ignorance. The following describes the system: Motherboard: MSI NF750-G55, CPU: AMD Athlon II X3 450, PSU: Hiper Type R MkII 880W, Case: Antec Three Hundred, Memory: Rendition by Crucial 1 X 4GB, Hard Drive: Seagate 400 GB, DVD: Samsung 22X SpeedPlus. Only the case, PSU and DVD come from the first build I did 18 months ago and were fine until the old MOBO failed.
    The problem I'm encountering with the new MSI NF750-G55 is booting to the DVD so I can load Windows Vista onto the hard drive. The POST gives me a Bad CHKSUM error and directs me to bios setup. In setup, the Boot Sequence shows my DVD and hard drives as disabled and won't let me enable either.
    I've uninstalled everything, cleared the CMOS and reinstalled everything five times. Nevertheless I am still getting the same error message and can't enable either  my DVD drive or hard drive. Therefore, I'm unable to successfully boot up and load windows onto the new hard drive.
    I'm out of ideas and ready to return the MOBO to Newegg for another, but I would rather fix the problem. Does anyone have any ideas as to what I can try next before I ask for an RMA?
    Thanks in advance for any help you can provide this newbie.

    Quote from: Pixy on 16-April-11, 04:24:53
    I've tried loading defaults (both optimized and fail-safe) in bios setup as well as by using F2 in the chksum error screen. All result in a screen that looks like this:
    The text that is obscured in the upper part of the screen reads:
    BTX loader 1.0 BTX version is 1.01
    Console: internal video/keyboard
    Bios drive C: is disk 0
    Bios 636kB/2030208kB available memory
    Once in that screen, the only way out is to unplug the PSU and reset the CMOS.
    As I said before, I'm stymied and have no idea what to try next.
    Quote
    Once in that screen, the only way out is to unplug the PSU and reset the CMOS.
    do not do this, just hit reset button then press F11 during BIOS post screen and boot from your optical drive.

  • No video with NF750-G55

    NF750-G55
    2X1GB Corsair XMS3 DDR3 1066
    AMD AM3 X4 945 @ 3.0ghz
    ULTRA 750w LSP
    XFX Radeon HD 5770
    New build. Loads Windows 7 fine, everything works fine... except when I try to use the graphics card. Tested the card on another machine and it works perfectly fine. I flashed the bios to 1.3 and still nothing. Tried changing the settings to Primary graphics PCI-E and disabling onboard VGA. All I can do is get it to boot with the card inserted but plugged in to the onboard gpu. If I switch settings back to default I just get full spin up and no post. Anyone know how to fix this?

    Do >>Clear CMOS Guide<< with power cord removed

  • NF750 g55 not powering up

    Hi,
    So my dad is addicted to newegg and buys parts just because they're a good deal (even though he probably won't get to ever using them).  So while I was home recently I made a build literally out of parts that were lying around.  Here's the specs.
    MB: MSI nf750-g55   
    CPU: AMD athlon || X2 X260 3.2g
    RAM: 2 gskill ddr31600 pc3 12800 4gbX2
    PSU: Thermaltake Purepower(tm) atx 12v 400w
    The onboard gpu makes a weird noise so I added an ATI Radeon HD 5450 VC
    The problem:  So everything worked fine for about a month and a half.  Used it as a media center for my tv.  One day I left it on while I was doing laundry.  I couldn't have been afk for more than 10min, but when I came back , all the aps lights were off, the keyboard and ethernet light was on, and the led on the front of the case was flashing(whatever that meant).  So I hrmmed and tried to reboot, no go.  When I try to power on, the aps flashs for a sec then nada, no fans, nothing.
    Thought it was the PSU so I used a tester on the 400w and everything was fine.  But I tried the 650w in my other computer anyway.  Replaced the CMOS battery.  Reseatted all the hardware.  (Except the CPU cause I don't have any thermal compound here. But I know I didn't overpaste).  tried without the VC and different RAM.  Zero success.
    I've seen other threads with the same problem with this board.  Is there a flaw or something in this board?  This is the first time I've ever had a problem with MSI, my other computer is on a 890FXA.  Hopefully someone reads this can help me out.
    Because everyone loves emoticons    (is this last one flipping the bird?)
       

    So I took the MB out of case , took out the CPU, polished the cooler (again, still looked grainy though), reapplied silver thermal compound, reseat.  I plugged in the 24 pin and the 4 pin, prayed, turned on the power button on the MB, and...nothing.  APS flashes for a second, CPU  fan doesn't come on.  Get this, though.  When I plug in only the 24pin and not the CPU power connector, I get power.  Light 1 on APS stays lit, CPU fan and PSU fan stay on.  I turned off the power shortly after because I wasn't sure if this could cause any damage. 
    So, does this mean the problem is with the CPU?  Is the MB refusing power to the CPU to prevent damage? I don't have a spare CPU to test with.
    the 650w psu is a Corsair.       

  • NF750-G55 - BSOD from any enabled network adapter

    Hello MSI community,
    I am posting this from my phone as my system is BSOD if I enable my network adapter...
    I've done multiple troubleshooting restarts disabling and enabling differant components and from I can discern it's the network adapter(s) causing it...
    I'm using the built in NVIDIA nForce 10/100/1000 Mbps Ethernet device.  I've updated all system drivers (as far as I can tell) from the Nvidia site. But if this device is enabled I'd get BSOD every 5 mins or so..
    I disabled the NForce adapter and tried using a Belkin N Wireless device... But I'm also getting BSOD when that is enabled (which is using a completely different driver).
    Has anybody heard of this problem?  I'd be happy to upload more system info if needed, as long as my system stays stable long enough to transfer the info. >.<
    Info I can provide:
    BlueScreenView shows the crash as a UNEXPECTED KERNEL MODE TRAP in address ntosknl.exe+70740
    this happens every 5 mins almost exactly.
    Mobo: nf750-g55
    CPU: AMD Phenom II x4
    Memory: 4096mb Corsair DDR3 1333Mhz
     

    The new installation that you did with the new motherboard seems to have a problem.
    When you then install the motherboard drivers, try SafeMode.
    Have a look in Windows' logs, under Admin..., for errors.
    Please mention PSU and Windows version in the list of specs.

  • MOVED: NF750-G55 CPU voltage adjustment problem

    This topic has been moved to Overclockers & Modding Corner.
    https://forum-en.msi.com/index.php?topic=143087.0

     Please provide more information for the rest of your system.  >> Posting Guide <<
     You are using +/- keys on numpad & not +/- next to 'Backspace' key ?
     You should be able to get way over 1.2V, look at his thread: http://www.testseek.com/labs/reviews/review-of-msi-nf750-g55-motherboard/?p=2740

  • Nf750-g55 no installation cd

     hi guys i have been given a msi nf750-g55 but the guy hasnt got the installation cd! can any one advise me how to get round this or know anywhere where i can buy one?
    Thanks guys
    rob

    you don't really need it,
    you can find drivers http://www.msi.com/product/mb/NF750-G55.html#/?div=Driver&os=All
    and utilities http://www.msi.com/product/mb/NF750-G55.html#/?div=Utility&os=All

  • MOVED: MSI Nf750-G55 Epp/E.M.P/SLI support?

    This topic has been moved to Overclockers & Modding Corner.
    https://forum-en.msi.com/index.php?topic=141682.0

    Quote
    Does the Nf750-G55 support EPP/X.M.P?
    It definately does not support XMP Overclocking Profiles (they are for Intel Platforms only).  You modules do not have EPP Memory Overclocking Profiles (NVIDIA Chipset Platforms).
    Quote
    And if it does how do i enable it?
    As you do not have modules with EPP support and since your mainboard does not support Intel XMP Profiles, there is nothing to enable.
    Quote
    I also want to know if it allows you to adjust voltages
    You can adjust voltage values manually in the Cell Menu.
    Quote
    When i try to change the CAS latency to 7 i cant post.
    Well, either don't set the CAS Latency to 7 then or raise the memory voltage accordingly and make sure that the Command Rate is manually set to 2T/2N.

  • MSI Nf750-G55 Epp/E.M.P/SLI support?

    Does the Nf750-G55 support EPP/X.M.P?
    And if it does how do i enable it?
    I also want to know if it allows you to adjust voltages

    Quote
    Does the Nf750-G55 support EPP/X.M.P?
    It definately does not support XMP Overclocking Profiles (they are for Intel Platforms only).  You modules do not have EPP Memory Overclocking Profiles (NVIDIA Chipset Platforms).
    Quote
    And if it does how do i enable it?
    As you do not have modules with EPP support and since your mainboard does not support Intel XMP Profiles, there is nothing to enable.
    Quote
    I also want to know if it allows you to adjust voltages
    You can adjust voltage values manually in the Cell Menu.
    Quote
    When i try to change the CAS latency to 7 i cant post.
    Well, either don't set the CAS Latency to 7 then or raise the memory voltage accordingly and make sure that the Command Rate is manually set to 2T/2N.

  • Re: NF750-G55 core unlocking?

    Hello from me again... I just got my new nf750-g55 after bricking my old one(msi) by using msi inbuild flasher and not these forum's procedure...
    Anyways that's not the point...
    I want to unlock the 4th proccesor as i have AMD Phenom II x3 Black Edition....
    I have tryed this with my old mb(the one bricked) and had the same results.
    I am going to explain the procedure i followed with the nf70-g55
    BIOS->CELL MENU-->NVIDIA CORE CALIBRATION-> SET TO [AUTO ]-> SAVE SETTING AND EXIT
    After I press the save the computer shutsdown (not restarting like normal procedure)
    I press the power the pc is powered but i have no POST
    I reset the bios and here i am again hearing suggestions from you guys and mistakes (that i might have made)...
    CPU:->PHENOM II x3 BLACK EDITION
    RAM:->DDR3 2x2GB OCZ
    MB: MSI NF750-G55
    GPU1:  mGPU Nvidia 8200 (onboard)
    GPU2: NVIDIA 9600GT 512MB
    Power: TAGAN 480Watt in COmbined Mode
    Thanks in advance

     Don't hijack!! Topic split.

  • NF750-G55 temp question

    hello all. im having a bit of an issue here. ive had this board for a few months now and ive just noticed this icon labeled motherboard temp.  what is this exactly?  ive included a screen shot.  it says 82c.  thats a little high isnt it?  could it be a malfunctioning sensor.   im using the latest stable version of HWINFO32.  i also have a question about another sensor.  the mcp temp.  would this be the northbridge temp?
    any help would be greatful.
    pc specs:
    amd [email protected]
    8gb gskill @1333mhz
    asus 560ti 950/1900/2200
    msi nf750-g55 mbo
    corsair ax850 psu

    I'm seeing oddball temps too on one sensor...   
    driving me nuts, it is.
    HWINFO64 shows:
    CPU: 39 (I'm running prime95 on it to test for stability...)
    Auxillary:29
    Motherboard:109
    They are fluctating, so I know it's measuring SOMETHING... but 109C?  Damn baby cook eggs on that!
    Where on the motherboard is this sensor?
    The heatsink to the REAR of the cpu slot is not hot, the one by the PCI/PCIE slots is pretty warm to the touch...

  • Msi nf750-g55 System Randomly Shutting down.

    Hello everyone, Back in April of this year I built a system through newegg with the following Specs:
    Motherboard: MSI NF750-G55
    Processor: AMD Phenom II x6 1090t (with stock heatsink)
    RAM: Corsair x4 2GB DDR3 1333
    Power supply: Cougar 700W Sli ready
    Graphic Configuration: two MSI Geforce 460 Cyclone GTXs running in SLI
    Hard drives: 1 WD 300GB VolociRapter and a WD 500GB mybook removed out of its external
    Operating System: Windows 7 Ultimate 64bit
    Not long after I built the system (before I even thought of overclocking it) I began having a serious yet vague issue: It would shut down randomly. And I mean very randomly. Sometimes it occurs once every couple of hours, and other times it doesn't happen for more then a week. It doesn't seem to matter what I am doing on the system either. I could be playing games, or just listening to music and it will still happen, so I can't imagine its related to load. Its been a long, painstaking process to try and fix. I ruled out some of the parts it could be though. I have replaced the Power Supply with a higher quality model and an extra 50 watts, checked the temps on the system for a number of weeks while idle and under load (all looking cool except MCP), ran memtest86 successfully for a full 24 hour with no issues, as well as re installed windows 7 once. Issue still occurs.
    To be perfectly honest I am not really sure where to go from here. I purchased all my parts through newegg, so I am confident I could RMA the component that is experiencing failures if that is the case, but there in lies the problem: I am not sure which one to RMA! I don't have a means to swap out parts, as no one i know has a system with a similar configuration as me.
    I am suspicious of the Motherboard along with the processor, which is why I am posting in these forums...
    Any ideas or suggestions as to how I could either fix the problem through configuration or pinpoint which hardware component is causing these random shutdowns would be much appreciated! I really don't want to run the risk of damaging any of the other components...

    Swapped out my first 460 with my other one after 2 consecutive shut downs in 1 hour... haven't been around to continue working on it until recently, but atleast its looking like it isn't my cards.
    Quote
    it doesn't matter, software voltage measure isn't accurate you can't trust them.
    If you want to check voltages [use multimeter],
    or best test with another well known working and powerfull enough quality and single rail PSU
    I got a question, why would single rail or multi rail make a difference? I hear the only reason they split the rails is for protection... and if both my PSUs are SLI ready, why are my components drawing too many amps?
    So I guess its time to shell out another 100 - 150 bucks on a PSU... Can't say I'm thrilled. Looking for one with a single 12v rail. My question is this, would this single rail power supply meet my needs?
    http://www.newegg.com/Product/Product.aspx?Item=N82E16817153127&cm_re=single_12v_rail-_-17-153-127-_-Product
    And if not can you or anyone make a recommendation(s)? Thanks!
    Quote
    As for the AMD standard paste, sorry but I remove that instantly and add my own itty-bitty-tiny drop of grease and smear it so thin you hardly see it.
    Too much paste can cause this too, and yes I consider the AMD amount too much.
    Heck without paste it will do a better job then the AMD amount, the CPU has a heat-spreader and doesn't need that much.
    But, it could also be your heat-spreader is broken, as such CPU-temp-readings will reveal that.
    Well, so far I've seen no problems with temps. The shutdowns don't seem to indicate that heat is a problem too. I can start the system immediately after a shutdown, it doesn't matter what I am doing on the system to make the shutdown occur, and my peripheral devices are sometimes still powered after a shutdown (such as caps lock on the keyboard).
    Also, hardware monitor shows it idling at almost room temperature in the post above lol. Under load I think about 38 - 40c from what I remember seeing. I'll post a load temps pic after a few hours of torture testing tomorrow.
    Also, I may have only personally built one other computer from scratch, but I have done quite a bit of troubleshooting, as well as assisted with other people's builds. Now I am not calling myself an expert by any means, but all that being said I have yet to come across or even hear of a CPU heat related problem where there was too much thermal paste on a stock heat sink... lol learn something everyday.

  • MSI NF750-G55 connecting the power button? noob question i know

    just bought my computer, AMD Phenom II x4 965 BE and MSI NF750-G55 motherboard.
    bought a nice cooler master case and i just need a little help setting up the power button and LEDs.
    i understand everything in the manual that came with the motherboard completely i just need to know how to identify which cables from my case should be positive or negative?   im assuming that if a little arrow is pointing to the connector wire that it's positive?
    any help is greatly appreciated, hate to fry my board first day out of the box...   

     For power & reset switches it doesn't matter which way you plug them in as long as you plug them in at the right place. They are simple momentary contact switches and polarity doesn't matter for them. As far as the LED's go if they are plugged into the right place they either light or they will not. If they don't light then simply swap (reverse) the connection and they should work. Just go by what the manual shows for the where part of plugging them in. You are not likely to fry anything.

  • MSI NF750-G55 Hangs

    Ok, shooting in the dark here. I just purchased the MSI NF750-G55 from Newegg along with these components:
    CORSAIR Vengeance 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800), sticks in slots 1,2
    AMD Phenom II X6 1090T Black Edition Thuban 3.2GHz Socket AM3 125W Six-Core Desktop Processor (including fan)
    XFX HD-485X-ZNFC Radeon HD 4850 1GB 256-bit DDR3
    Antec NEO ECO 400C 400W Continuous Power ATX12V 2.3 / EPS12V 80 PLUS Certified Active PFC Power Supply
    The system hangs randomly. Sometimes with a BSOD (that disappears too fast to read), sometimes the screen just freezes requiring a hard reboot. Totally random, I can play Witcher II for hours just fine without and incident, or I can mess around with Solitaire and have it freeze 10 minutes in. I cannot find a pattern to it. Nothing in the Windows Event Logs other than the un-expected shutdown messages.
    I have not messed around with the BIOS settings or played around with any overclocking functions, everything is stock/default.
    I have run Memtest86, did not find nothing or hang the system. (let it run overnight)
    Windows 7 64 Professional, latest drivers from MSI and ATI (for the video card).
    Any suggestions as to where/how to start to troubleshoot this?

    Umm isn't "Vengeance" memory for use with icore/Sandybridge systems?
    I agree psu but then changed to ram issues when read the memory you're attempting to use with that system.
    I'm not seeing any Vengeance on the list for your board, XMS yea but not Vengeance unless I missed it.
    Not saying no way it can work but might require tweaking to do so.
    Have you run memtest at all?
    You really should be using the Corsair Dominator GT memory with your Phenom II see>http://www.corsair.com/vengeance-8gb-dual-channel-ddr3-memory-kit-cmz8gx3m2a1600c9.html click on the FAQs & Support link on the page.
    Might RMA exchange it with newegg or if not there talk to "Ram guy" over at Corsairs support site, he'd surly help you out if you asked I'd think.
    You might in the end get the Vengeance to work yea, if its the root cause of the issues you have now, tweaking it some to get it working right, might not be optimal to do so regardless.
    Any way I'd run memtest if you haven't, see what that tells ya first.

Maybe you are looking for

  • Creating a database on Personal Oracle 9i on Windows 2000

    Hi, Well, I cannot create database on Personal Oracle 9i on Windows 2000 via Database Configuration Assistant. Same problem occurs during installation. Here is the message: CreateProcess: null -new -sid DES -startmode m error=2 Does anyone know anyth

  • Why do I see a directory access message when trying to install iTunes?

    iTunes won't install. I first got this error when trying to update to 9.2: "Error writing to file C:\Program Files\iTunes\iTunes.Resources\it.lproj\TVShowsIntro.nib\objects.xib. Verify that you have access to that directory." I then tried to uninstal

  • Install solaris via hyper terminal

    Hi, I just got my new ultra 5 box and I was wondering what type of cable and hyper terminal settings I need in order to get this thing rolling. The type of cable I used before was a null modem cable db9F --> db9F. Then I read I needed db9 --> db25. S

  • Where is my Acrobat serial number?

    I do not know where my Acrobat serial number is? So I can not download ANY pdf files. Every time I try to down a file it says you must start Acrobat to continue, then it asks for a serial number. WHERE IS IT????

  • What if the respondent doesn't have Adobe Acrobat?

    This may seem like such a stupid question: I have created a form that I want to send to a group of people to fill out. So, if I attach the pdf form to the e-mail that I send, does the respondent need to have Adobe installed on their computer to fill