NF980 + SLI What Bios settings should be set at for PCIE.

I currently purchased back in april the 955 BE am3 chip from AMD. I paired that with 4 gig's of mushikin 1600 ddr3 ram with a latency of 7-7-6-18. I have installed 2 EVGA Geforce 9800 gtx+ SSC editions. Now here my issue, I currently play a brand new MMO called Aion. This board got released right as Aion came out, but at the time I was currently using a m4a79T deluxe, but obviously only utilizing one video card. Aion flew at between 120-130 fps. Now I purchased this board (NF980-65) hooked up everything I did above, again pairing it with Vista 64. I am now utilizing an SLI setup. However on this board my ram is showing much much lower then what it should be. I've read through the forums and will be correcting the ram issue tonight. But now I am curious what the Bios settings should be for PCIE because my frames per second NOW using two cards, has dropped down to , get ready for this 20-50 fps. All drivers are current, and up to date. Everything except the ram is proper and in order. I am wondering if I need to manipulate the Bios for PCIE or something, or what they should be at exactly so that I can utilize this system to its fullest potential. These cards are Nvidia, this board is Nvidia, yet 1 card ran better on a crossfire only board. Please help.

Quote from: Svet on 02-October-09, 00:34:09
Install latest VGA drivers ==> http://www.nvidia.com/object/win7_winvista_64bit_191.03_beta.html
191.03, 2009.09.25
Also the game "Aion" may not have corespond SLI pro file or to do not support SLI.{contact to game vendor to find out}
Another tip:
Apply from Nvidia CP:
Turn off Vertical sync
And set SLI Performance mode to: "Force alternate frame rendering 2"
Apply and re-test.
The game does not have an SLI profile. However, I should have mentioned, I uninstalled 1 card to kind of recreate my april environment. No change in FPS. Nivida control panel also has a feature to create your own profile if you will, or turn off sli, which I did too, without change. It has the last nvidia drivers of course, as its a brand new build, so it would require brand new drivers. I said that in the initial post. Again, all settings in OS and hardware are proper and in proper order. Thats why I asked about bios to begin with. You cannot setup a new computer with a fresh install and even see the nvidia control panel without installing it first which would be accompanied by the newest nvidia driver install package. Fyi. Also, I tried the additonal tip you mentioned in creation of a profile...Didn't change.
You seem to know alot about this,I'm honestly impressed. But are you certain my bios settings from the factory are completly correct for an SLI setup?

Similar Messages

How to install Windows 7 in UEFI modeand what bios settings for D30

How do you install windows 7 in UEFI mode and what bios settings do I need to install it on a D30 workstation.

Not a ThinkStation guy, but FWIW, that can happen when installing Win 7 in UEFI mode when CSM support is not enabled in BIOS.
Is CSM support - either explicit or by selecting "other OS" and turning UEFI back on as suggested above - an option?
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

What iPod settings should be checked to automatically sync

Hello,
At iTunes what iPod settings should be checked to have iTunes automatically add the latest songs. I played around with them that I can't remember how they were before I messed with them. To be clearer - I mean where you can see that long status bar that tells you how full your iPod is and there are 4 boxes to checked or not checked.
Thank you,
Nick M.

Thank you for your reply,
Yes, that's the section - what I want to know is which of the 4 boxes there should be checked in the Options section for normal operation?
Right now I have checked:
Open iTunes when this iPod is attached
Sync only checked songs
(unchecked Manually manage music)
Enable disk use
With these settings I have to now eject the iPod after syncing.
I know this isn't a major problem - still, it would be nice to solve it.
Thank you,
Nick M.

890FXA-GD70 - what bios settings for RAM

I have a 890FXA-GD70 mb and some GSkill dual channel memory with latency of CL7-7-7-21 at 1.5v.
Specifically, what bios settings do I change to properly use this memory?
thx

Quote from: camphill on 19-April-11, 06:16:34
I have a 890FXA-GD70 mb and some GSkill dual channel memory with latency of CL7-7-7-21 at 1.5v.
Specifically, what bios settings do I change to properly use this memory?
thx
Need more information pertaining to the issue at hand, does the PC have problems booting or stability issues or does it run no problems at all?
From whats in your sig it seems you have some OCZ unless that is incorrect? What is the issue at hand?
For dual channel, put the two sticks of ram into color matched DIMM's closest to the CPU, 1&2 for AMD boards as far as I know.

What key fields should i set in DSO extracting data from 2LIS_02_ITM

hi experts
i extract data from 2LIS_02_ITM into a DSO, i know the DSO isn't a must, becoz the 2LIS_02_ITM delta type is ABR, but i want to keep the info in change log.
so, what the key fields should i set in the dso? just ebeln and ebelp is enough?
hunger for ur advice and thanks a lot!

If you extract ITM toa DSO you cannot maintain a log of every change....the data will come ....but when the data must be activated the reference of the ebelp ebeln will remain only a single record....if you want to maintain all the data you must create another field in extractor with you can difference all the changes for one single ebelp ebeln...
Regards

What eq settings should i use for my ipod touch if i am using a car cassette cd adapter

i have found a cheaper way to listen to my ipod touch in my new 1999 cadillac catera is to use a casette adapter that you would use if you wanted to use a portable cd player in a car (although mine already has a cd player in it)
however my problem is that the audio for coming out of the speakers sounds a but tinny, and rough, i tried to use the eq settings (treble booster) and sound check to alevate the problem, and while it is marginally bettter now, the audio still sounds very rough and tinny
my question to all you apple experts is that if someone wanted to use a car cd casette adapter with their ipod touch, what audio settings does he/she need to use in order to make it sound right (meaning just like if you were using speakers at home or your headphones)

The appropriate MPEG2-DVD preset should suffice.

What project settings should I choose in PE8 for frame rate of 29.97 if camera source unknown?

Hi, I would like to know what project settings to choose in premiere elements 8 for a frame rate of 29.97, pixel aspect ratio of 1.3333 and 1440x1080? Should I choose HDV, AVCHD or hard disk? I didn't record the footage, so I'm not sure what it was recorded on.

I am definately selecting NTSC - HDV, HDV, 1080I30. I then import the video. It shows in the project media - properties as 29.97 frame rate and in the interpret footage it also shows as 29.97. But when it finishes indexing and starts to conform the video is changes to 25 frame rate.
Please see images below. When importing the video it is at a frame rate of 29.97 until the indexing has finished, then it changes to 25 before conforming video
IMAGE 1. Project settings
IMAGE 2. Indexing image. frame rate at 29.97fps
IMAGE 3. Properties while indexing video - 29.97 fps
IMAGE 4. Interpret footage - still while indexing at 29.97fps
IMAGE 5. Finished indexing changes to 25 fps and starts to conform video?

What Keynote slide size should I set up for a 60" screen?

Dear everyone,
I'm trying to find out what slide size I should setup in Keynote, for a presentation which will be played on four 60" flat screen TV's for a conference.
Thanks in advance for your precious help!
Malik

you should set the slide size to the pixel dimentions of the display you will present on:
Keynote > inspector > document tab > slide size:

What CMYK profile should I set it at for printing in Australia?

I'm working on a CD album cover and converting the photo from RGB to CMYK, but want to make sure that I have the correct CMYK profile.
There are various web, Japan, US, and coated options in the colour setting box.
But I need some guidance as to which one I should be setting this at in Photoshop?
Thanks
Kim

This should get you started: http://www.drevolution.com.au/blog/index.php?id=2683940155866559937
As mentioned in the article, always best to talk to your printer.

HP 4320t Thin Client bios settings - way to set remotely?

We have a supply of HP 4320t thin clients all running Windows Embedded 2009 SP3 32-bit. Is there a way to push out BIOS settings to all of them? I've found here on hp's website that there is a "repset utility" that can accomplish this, but have failed in my endeavors to find a utility like this for the HP 4320t Thin Client.

Try to disable the Automatically synchronize with an Internet time server in Date and Time Properties.
Although I am an HP employee, I am speaking for myself and not for HP.
Say thanks by clicking the "Kudos! Star" which is on the left.
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

What manual settings should I have for indoor sports?

I have a Powershot SX500 IS. I would like to take good pictures of indoor sporting event, for example Volleyball. What would be the best setting as far as F-stop, Shutter Speed for decent action shots?
Solved!
Go to Solution.

The short answer: open up your aperture all the way, bump up your ISO as far as you're willing to take it (Is 1600 ok on that camera?), and then as fast a shutter speed as exposure allows. Don't zoom in too far.
Long answer:
It depends.
Are you trying to completely freeze the motion? Or would you like perhaps a bit, like the hand of someone spiking a ball to show the movement? Maybe you want a lot, use a slow shutter speed and pan as a car goes by. You need to decide this ahead of time.
Everything else will be some give and take. Usually shooting indoors means pushing the limits of your camera, and yours is no exception. There are many different ways to do it, but here’s how I’d go about it:
I’d select the lens I want (not applicable to you) given the situation. Keep in mind that longer lenses require faster shutter speeds for sharp photos.
I’d set my aperture for my needs. Is it a lot of fast action and I want to make sure I get the shot? I’d go more middle of the road (f/5.6 – 8) to make sure I get my subject sharp. If it’s slower or I’m not worried about getting every shot I usually open it up as far as I’m comfortable with for that lens. I prefer how it looks, and since I’m indoors it gives me all the light I can.
I usually want a bit of movement (tires on a bike, tip of a baseball bat, hand of volleyball player, …) to give some life to my photos, so I’ll start around 1/200 or so and adjust from there depending on what I’m shooting.
Then I’ll just set my ISO for my exposure. If that requires too high an ISO for my liking, I make compromises, open up the shutter a bit, or lower the speed a bit.
This is a cyclic process, I’m constantly going over this as I shoot. If I decide I want a bit more motion then I’ll bring my shutter speed down, knowing that I can bump my ISO down a bit too for cleaner photos. Not enough depth of field? I adjust, and know that it’s going to cost me in ISO.

New to RDS - What do I need to set up for 3 users on 2008R2?

I need to set up an existing 2008R2 server with the RDS role so that 3 users can remote into the server and use Office applications. I've been on the phone with MSFT for 45 minutes and I think I get it, but I wanted to get a second opinion, and possible
rant....
As I understand it, I need 3 licenses for Office 2013 ProPlus in this situation.
I install Office 2013 on the server with the RDS role using the Office installer.
I register/license each User account
that will be logging in to the server (3 of them) as legitimate to use the Office 2013 installed on the server.
I do not *need* to install Office 2013 on the workstations of the three User's, but I may and not run afoul of the licensing terms.
Assuming all of that is true (and I doubt it is), I have the following questions:
Do I have to use 'volume licensing' for this, or can I just buy 3 retail copies of ProPlus?
Do I *have* to use ProPlus? I do need Outlook.
Can I use Office 365 ProPlus, and is it cheaper (up front) than the one-time perpetual license? Small Business Premium (see previous Question)?
Does the server need it's own license, meaning I need 4? If not, is there a special way I need to install Office on the server so it doesn't ask for a license?
Could a non-registered user (like a server Admin) use the Office installed on the server?
How many licenses are built into RDS? I recall hearing 2, to be used for admin purposes. So I would need to buy 3 CAL for the three Users intended in this setup?
What other questions should I have asked?!
I can't believe it's so complicated. And expensive! A quick perusal suggest a single ProPlus license is about $500! I'm sure once I have had time to digest it things will be fine, but up front, this system is really a pain in the rear.
Anyway, thanks to those brave enough to attempt to untangle this for me!

For the O365-on-RDS aspect, bad news, it's not a valid installation scenario.
You would need a Volume License edition of Office2013 to install upon RDS, because O365 only offers the Click-to-Run installable, and that can't be installed upon RDS:
http://technet.microsoft.com/en-us/library/ee624360.aspx#Table
http://community.office365.com/en-us/forums/156/t/138757.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

What is the best home set up for a family to share/use apple products

Hi, I am relatively new to apple (have an iPad) and having been a PC user for years I was pleasantly surprised with the apple experience and am now trying to work out the best set up for me, my husband and young son as I am buying them both of them apple products this Christmas. New Mac laptop/ ipad for hubby and then an ipod touch for my son oh and a new mac laptop for me. We are also thinking of moving from Blackberries to iPhones. Yes we seem to be hooked! but i am unsure about the home family set up and how to replace my PC network that I run off an 8TB server.
In reading the forums I keep seeing people talk about problems they have with two apple IDs and trying to merge them. I have also heard about a family ID allowing us to share apps legally. I am really nervous of setting us up wrong and then having problems later and hence i am now looking for some advice on how to share as much as we can legally but also make usage practical and not invading each others privacy. thoughts so far:
Music - I think we are happy to share the same music and access using one ID (we currently don't buy much music from apple but have lots of CDs we share).
Photos - It would be nice to share photos - as long as my son or husband cannot accidentally delete photos of mine (which is my biggest concern). I currently load all camera photos onto my 8TB storage box as the network owner and my husband has full access to copy any photo to his laptop but can never delete the original copies by accident.
Apps - If possible i would like us to share these but they are cheap enough these days to separate if really needed. Would be good to share licence for pages etc though
cloud, contacts, facetime, email - this is what is making me consider separate IDs or learning how to have multiple users in one apple ID - I do not want to have to share synced contacts with my husband. I have near 300 contacts now through work etc and he will not want them plus i will not want his or him being able to delete mine by mistake. and then for email and facetime, well I want to give him his privacy so I do not receive his messages etc. especially now that we are considering switching to iPhones
Then last but not least, i don't know the best solution for my son. he is only 7 years old so even though I don't want to pay for things again I don't want him being able to download "just any" app from the purchased icon in Appstore. Also, is there a child friendly setting to prevent him from viewing inappropriate content on the internet?
Appreciate I have asked a lot of questions here but I am looking for any genuine advice out there. Thank you in advance to any potential advisers.

Welcome to the Apple Community.
You don't need to use the same ID on a device for iCloud and iTunes.
iCloud covers mail, contacts, calendars, reminders, notes, bookmarks, photostream, document syncing etc and for these I recommend you each have your own ID's, this will stop others from having access to and likely more importantly being able to edit or even delete your personal information.
Someone of Age needs to be responsible for an account, so for younger children you will need to create and be responsible for an account yourself but let the child use it.
For iTunes you could use a single account so everyone can share music and apps or you could use separate accounts (there are ways to share content between users, Apple provides homesharing to do this).
When choosing how to proceed with iTunes, it might be worth remembering that someday your children will reach 21 (or whatever age they feel they have become independent) and will likely want their own account, changing accounts later may make it difficult to access previous content.
Photostream now has shared albums, so you can share just what you want with others. Shared photos using shared albums cannot be deleted by others with different accounts, but if you all shared the same account they could be.
Facetime and messages can also use an ID independently of each other, iCloud and iTunes. Separate ID's are recommended for these, joint accounts can be problematic.
iTunes has parental controls for youngsters, however at 7, I suggest you don't reveal the password to him and enter it yourself when he needs to purchase something, otherwise you may receive unexpected bills.

WHAT BIOS SETTINGS FOR RAID 0 MSI NEO4 SLI-F-AMD 3800+MANCHESTER

What are the M-Board settings for raid-0 I have 2 Seagate 7200.3 500gb drives MSI NEO4 SLI - f board and a AMD 3800+ Manchester. Thanks

Setting up raid
http://www.nvidia.com/object/feature_raid.html
There are two guides here :
Media Shield User's Guide PDF
RAID Floppy Disk Install PDF
Most things are covered in thees guides if running a nForce4 system.

What video settings should I select for 60m of video in iMovie

My gear: HDTV, DVD player that upconverts to 1080i, Canon HG10 HD camcorder
I record in HD. I have both an HDTV and a 4:3 standard TV. I don't have a Bluray player, nor do I want to invest in one at the moment.
I only need to record 60 minutes of video at a time to a single DVD.
Question: what settings in iMovie should I use to ensure the BEST video quality when I play back on my HDTV and DVD player that upconverts?

If you shoot 30p, ingesting 960x540 should be enough for your DVD output. If you use 60i, then importing and outputting at 1080i would be important to maintain 60Hz motion smoothness. (You shouldn't use stabilization or cropping while editing to avoid damaging 60i.) Then use MPEG streamclip or JES deinterlacer to resize 1080i 60 to 480i 60 to feed DVD authoring tool.
Or, you may want to use iMovie09 only as an importing tool for AVCHD video. Use imported movie (1080i AIC) in iMovieHD to edit movie and send it to iDVD, which will preserve 60i motion.

NF980 + SLI What Bios settings should be set at for PCIE.

Similar Messages

Maybe you are looking for