NFC Software between phone and PC

Hi,
I have a Xperia Z and an Xperia S.
I also own several computers with NFC technology.
Everything works, except between phone and computer. No matter which computer or which phone.
Everything else works, up to the TV, speakers, but just not what I would like the most.
When I try to pair them, there's an "unsuccessful pairing" sound, but no information about why it cant connect.
NFC is turned on, have tried updating, resetting, and third party software, however nothing fixes this problem for me.
Do anyone know what this could be, and what a fix for this could be?
Urdal

When you send a file using NFC it's actually sent over bluetooth. NFC is just used to setup the bluetooth connection between the two devices so the NFC software in your PC will probably have to handle bluetooth as well or be able to control your computers bluetooth software.
I don't know how you should configure this though as this depends on your NFC and bluetooth software. I recommend that you contact your computer support for this information.
 - Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

  • 3 iphones in household.All use same apple ID.But all contacts get mixed between phones and facetime calls come in from other contacts.Ho can we change this so our phone information isn't visible to each other?

    3 iphones in household.All use same apple ID.But all contacts get mixed between phones and facetime calls come in from other contacts.How can we change this so our phone information isn't visible to each other?

    Use separate Apple IDs for each family member and use Family Sharing features of those things (if any) that you do want to share. https://www.apple.com/ios/whats-new/family-sharing/

  • My phone is in recovery mode before its was off and however ifs get on showing connect to itunes  but now in recovery mode its showing itunes is restoring software on phone and and above its showing waiting for phone but not moving further what shold i do

    my phone is in recovery mode before its was off and however ifs get on showing connect to itunes  but now in recovery mode its showing itunes is restoring software on phone and and above its showing waiting for phone but not moving further what shold i do

    Recovery mode...
    http://support.apple.com/kb/HT1808
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.

  • HT204150 I have recently switched to the latest i-phone. my contacts are updated by i-cloud between phone and mac laptop.there are only about 720 contats showing on phone from app. 1250 on the computer. please advise how to correct phone

    I have recently switched to the latest i-phone. my contacts are updated by i-cloud between phone and mac laptop.there are only about 720 contats showing on phone from app. 1250 on the computer. please advise how to correct phone

    On the mac, only contacts in the "iCloud" section will sync to other devices.  Those in the "On my mac" section do not.  Could that be your problem?
    To test the icloud situation, log into icloud.com with your mac's safari and to to the contacts page.  What you see there is what icloud has received from mac and iphone. 

  • HT6162 I am trying to update software on phone and I am being asked for a passcode which I've never had set up before I am confused

    I am trying to update software on phone and I am being asked for a passcode which I've never had set up before I am confused

    You didn't have a passcode to unlock your iPhone when you turned it on?

  • Help needed with contact/groups synching between phone and laptop via cloud

    I installed OS X 10.7.5 and my software is up to date on both my I-phone and my MacBook. I have the cloud enabled. But now, when I try to access my contact groups on my I-phone, I just get the list of groups with checks beside them; I can't select a group and have those contacts displayed as they were
    prior to installing the updates. I have cloud enabled and can see the groups displated when I go to the cloud.com site. But how do I get my iphone to display contacts by groups again? If I click on "Done" with all contacts and all groups checked, the display goes out of the groups category and back to the
    list of all contacts. Do I need to change something in settings? At present, when USB-connected to the Mac and in I-tunes and looking at "information"
    for my Iphone, I don't have synch contacts selected. I thought synching was happening via the cloud. I didn't make any change in that I-tunes synch setting
    compared with before installing the new operating system and updating the rest of my software. If I need to check "synch contacts," do I check synch all
    contacts or the box for synching groups. I want to have all my contacts and all group organization that's on my computer duplicated on my phone and would like to have synching happen without having to physically connect the phone to my computer.  Help would be appreciated!

    http://www.apple.com/business/theater/#managegroupsofcontacts
    Download the "Groups" app from the app store.  It is free. 

  • CUCM 10 Barge/CBarge with shared line between phone and a remote device

    Is it possible to configure CBARGE/BARGE feature if shared line is between a cisco phone and a remote device.
    When remote device picks up the phone, red light comes up on the phone, if we press the line button to Cbarge, dial tone comes up and the call does not go into a conference.
    Has anyone used that feature? Can it be configured?

    We are using Lync for tesing purposes.
    we tried scenario with Remote device as a mobile phone.  Where calls are being sent through SIP trunk to CUBE and then to our provider. Maybe I should add some commands on CUBE router?
    Is that feature (CBARGE) designed to work in that scenario when shared line is answered via remote device on CUCM 10.5.1.10000-7.  I am suspecting that its not designed to work that way (If its designed to work that way, we will continue on with collecting traces, etc). 

  • No deauthorise button available in iTunes account to sync apps between phone and iTunes

    Message reads: "One computer is authorised to play content purchased with this Apple ID"  However there is no button to deauthorise one or all computers.  As a result i cannot sync apps back to iTunes from iPhone. If i do sync it will wipe all existing apps from the phone as the new version of itunes will not allow me to sync more than 5 computers.  I have only ever had iTunes on one laptop previously so i don't know why i am receiving this.  Is there a possible solution anyone can please recommend?

    Yes!
    Luckily, if you be very careful and pay attention to what you have selected in itunes, you can separate these things
    Basically, in iTunes, there are tabs at the top for Summary, info, apps, etc..
    These tabs control PER DEVICE what syncs between itunes and the device.
    Therefore, you can plug iPhone 4S #1 in, and select to sync contacts with address book, then do so.  Then plug iPhone 4S #2 in, and not choose to sync with address book.  iTunes will keep these settings separate. However, in that situation for music and apps, you would check to sync both on both, in order to get all music and apps on each.
    The only thing to watch out for, each computer 'user' has only one set of address book and ical, meaning that if you want to sync both phones to the computer, but dont want to mix contacts, only one phone will be able to sync contacts and/or calendars.  Basically, each category in the Info tab will only hold one device's information, so you CAN do contacts with iPhone 4S #1, and calendars with #2.

  • Glitching between phone and ipod

    My iPhone began randomly switching back and forth between the phone and ipod. Each time I tried to make a call or answer a call after a second it would hang up and switch to the ipod and play music. When I unplugged the wired headset provided with the iPhone thus stopped. Any ideas on causes and fixes? Am I doomed to never use my headset again?

    Abnormal... call AppleCare!
    B

  • WindowsPhone Lync 2013 - No message sync between phone and desktop apps

    If Lync is running on my phone and desktop, incoming messages appear in both clients. However, messages I send are not reflected in the other client. This means that if I have a conversation from my phone, when I return to my desk all I see in the conversation
    window are the incoming messages.
    Skype handles message sync across all clients, Why doesn't Lync?
    Cheers!
    Matt

    Hi,
    Lync Server determines which endpoint is currently most active for that user. For example, a user might be Away at two of the three endpoints, so the server sends the message only to the endpoint where the user is Available. If the server is unable to determine
    which state is most active, it sends the message to the endpoint it determines most likely active and waits to see if the user acknowledges the toast at any location. If the user opens the toast at an endpoint, the server removes the message from the other
    endpoints. If an endpoint doesn’t acknowledge the message, the server leaves the message at only one location which is the most likely endpoint.
    Best Regards,
    Eason Huang
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Eason Huang
    TechNet Community Support

  • How can I get my e-mail to update between phone and iCloud

    Thanks to help of randers4 I was able to get iCloud installed on my computer with Vista operating system.  Now my dilema is that everything there is updating, except for my e-mail.  I created an iCloud e-mail account, but don't plan on using it.  I want to use my established e-mail address, not the iCloud e-mail.   Also I noticed when I was setting up iCloud on the computer , when the iCloud screen showimg Mail, Contacts, etc. it showed Internet Explorer.   We have Firefox, does that make a difference. 
    Also, I had downloaded ringtones from ITunes on my iPhone 4 which my husband now has.  Is there a way for me to get those same ringtones on my iPhone 5c without repurchasing them?
    Appreciate all help; has been great so far.   Sorry to be so dense!

    You can use a different email account, but it will not appear on icloud.com as iCoud only hosts iCloud email.  Just add your account to the email client on your PC as you would any other email account.  To add the account on your iOS devices (iPhone), go to Settings>Mail,Contacts,Calendars>Add Account, choose your provider and provide your account details.
    You can't redownload purchased ringtones from iCloud for free but you can sync them to your 5c using iTunes.  To do so, connect your iPhone 4 to your computer, open iTunes and go to File>Devices>Transfer Purchases.  Then go to the Tones folder of your iTunes library and confirm that the ringtones appear there.  (If you don't see the Tones folder, go to Edit>Preferences>General and make sure Tones is checked in the Show options.)
    Then connect your 5c to your computer, open iTunes, click on the name of your phone in iTunes, go to the Tones folder of your iTunes sync settings, then check Sync Tones and click Apply at the bottom to sync your phone.

  • ICal no longer syncing between phone and MBP

    my macbook pro and motorola razr are no longer syncing with my ical...during the sync it says it is syncing it but nothing i add to ical is getting to the phone. address book is syncing normally (or as normal as the razr is capable of). any help appreciated. thanks

    Hi Meg
    I am using iBooks on all devices since it became available on the MAC OS. Prior to this (when it still worked) I used adobe reader on the MacBook and iBooks on the iPad and iPhone, as these files synced with the iOS devices.
    I noticed some time after an upgrade that some of my files disappeared.
    I'd appreciate any assistance.

  • Can I move a Sim card between phones - and a phone between carriers?

    I have a Verizon iPhone 5C and am on the Verizon network. I recently was left (in a will sadly) an AT&T iPhone 6 Plus. I tried just replacing the AT&T sim card with the Verizon one, but a message shows up that it needs to be activated (so I'm moving it back to my iPhone 5C). I'm wondering if I take it to my Verizon store (I can take all the paperwork to prove it is mine) if they can/ will activate the sim card in this iPhone 6 plus or if it really won't work. I figured someone on here would have already tried or have done it already and know the steps to get it working if possible. Thanks!

    Verizon will not activate a phone on their network that was not sold specifically for use on their network. If they have not rolled out VoLTE in your area, there would be no way it could physically work anyway.
    Your best bet would be to sell the AT&T iPhone 6 and use the proceeds to buy a phone for Verizon if you intend to stick with Verizon.

  • I restored my software on phone and now I can't get anything. The screen just has an emergency call feature and when I call it , it doesn't ring.  Any idea how I can get back into the line?

    How do I get the phone to work again?  It has no apps on it and the only thing I can do is make an emergency call and when I call it from another line I just get voicemail.  Before restoring I backed up the info but don't know how to get it restored on the phone.

    Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card:
    http://support.apple.com/kb/HT2534
    Step 3 is important, no matter whether you do this on a Mac or an iPad / iPhone:
    Important: Before proceeding to the next step, you must download and install a free application.
    My bill will be considerably less than $300.

  • Copying software between Leopard and Lion

    Hi,
    Recent Mac convert here, I downloaded a student copy of Form-Z modelling software and while I know for a fact the programme itself is compatible with Lion, the installer uses Rosetta, so won't install on my macbook pro. I still have the Leopard disks for the home Imac, so it's my understanding that I can reinstall Leopard on the Imac, install the software on Leopard, then copy it across to Lion on the macbook, bypassing the installer.
    But how do I copy the installed software from leopard to lion on the macbook? Do I just copy the icon onto my portable hard drive?
    Apologies if this has an obvious answer, but after a decade of using windows, I'm basically starting over again.
    Fraser

    Don't use it, but you should inquire at the developer's site: http://www.formz.com/products/formz/formzDocumentation.html

Maybe you are looking for

  • Outlook Sync with iPod Slow

    I sync my iPod with my Outlook (calendar and contacts) successfully but each time it takes at least 20+ minutes to complete a sync. I can understand it taking a while the first time you sync with Outlook but everytime thereafter? Why would just a few

  • Slow motion lost after sync from mac to iphone

    Hi, I can capture videos in slow motion but those videos play at normal speed once Sync them via iTunes. 1. Capture videos in slow motion. 2. The videos first play in slow motion in the iPhone. There is a time line slider to move the slo-mo effect ba

  • IPhoto 6 & Photoshop Elements color management

    Hi All - I have recently purchased and installed both iPhoto6 and P.S. Elements 3.0 so both are new to me. I'm trying to co-ordinate the color between iPhoto, PS Elements, the camera and printing. Forget printing for now. At this point I just want th

  • Transferring photos in I photo to yahoo mail

    I have some 500 photos in Iphoto, but when using yahoo and I wish to send a photo and browse is chosen only 180 photos shown. is there something obvious I am missing - fairly new to Apple? Bob Andrews

  • Javascript profiling in Safari 7

    Javascript profiling already is not available in Safari 7 in Develop Menu. Maybe there are some Safari extension for the same purpose?