NFe 3.10 Inbound - Dump na etapa Simular Invoice

Pessoal, boa tarde!
Estamos testando o processo de inbound (com automação) e depois de aplicar todas as notas para a versão 3.10 estamos com o seguinte erro no GRC ao executar o processo "Simular Invoice e NFe":
No ECC, ocorre o seguinte Short Dump:
Pesquisando no fórum, encontrei o mesmo erro do GRC, porém para outra função: GRC10 - Incoming NFe erro 00 341
No programa SAPLJ_1B_NFE_IN, include LJ_1B_NFE_INF3K a função e o parâmetro "IT_EXTENSION" existem e estão OK.
As SAP Notes 1752688, 1826868, 1857765 já estão aplicadas.
Alguém está com o mesmo problema?
Estou tentando fazer o debug desde o GRC mas ainda não consegui acertar o break-point. Onde exatamente devo colocar os breaks para conseguir debugar até chegar nessa função no ECC?
Obrigado!

Boa tarde Ricardo,
Se o seu processo for o simulação de compra normal, você pode colocar o break na função /XNFE/CALL_NFE_SIMULATION_NP caso contrário existe uma função para cada processo.
/XNFE/CALL_NFE_SIMULATION
/XNFE/CALL_NFE_SIMULATION_CSGR
/XNFE/CALL_NFE_SIMULATION_CSIV
/XNFE/CALL_NFE_SIMULATION_FDGR
/XNFE/CALL_NFE_SIMULATION_FDIV
/XNFE/CALL_NFE_SIMULATION_GR
/XNFE/CALL_NFE_SIMULATION_NP
/XNFE/CALL_NFE_SIMULATION_SA
/XNFE/CALL_NFE_SIMULATION_SC
Att, Cesar Coelho

Similar Messages

Dump error while creating Invoicing document

Moderator note - this is the same problem as identified in thread Error is generated in Print workbench function ISU_INV_BILL_PREPARE. Thread locked and poster notified of rules violation.
Hi Experts,
I am new to ISU application.Please provide solution for below mentioned dump error.
The error is generated in Print workbench function ISU_INV_BILL_PREPARE which is called from application form IS_U_BILL (/1PWB/SAPL20020100218092657) when I'm trying to generate invoice for the bill in EASIBI.
Error analysis
Short text of error message:
Unexpected ELSE case: field sy-subrc with value 0 (/1PWB/200201002180926
57 )
Long text of error message:
Something has occurred in a CASE or IF construct which the
developer did not expect, or which is not permissible here.
System Response
Procedure
Note the field name and field value from the message as well as the
data pattern which lead to the error. Create a problem message.
Technical information about the message:
Message class....... "E9"
Number.............. 898
Variable 1.......... "sy-subrc"
Variable 2.......... 0
Variable 3.......... "/1PWB/20020100218092657"
| Variable 4.......... " "
Thanks in Advance.
Vaseem
Edited by: William Eastman on Mar 9, 2010 2:34 PM
Edited by: William Eastman on Mar 9, 2010 2:36 PM

Hi Experts,
Please reply..... It's very important.
Thanks
Vaseem
Moderator note: DO NOT beg for answers, or suggest that you need an immediate reply. Read the rules of engagement here Research Resources and Rules of Engagement
Edited by: William Eastman on Mar 9, 2010 2:24 PM

TCode MIR7: Dump while deleting Parked Invoice with zero value

Hi,
We had parked an Invoice using TCode MIR7 with Zero Value with reference of a PO. Now as the value of invoice is zero, we want to delete it using MIR7.
In MIR7, when we go to Invoice Document-->Delete, it results in dump. Dump is as follows:
Error analysis
    Short text of error message:
    No document found
    Long text of error message:
    Technical information about the message:
    Message class....... "FI"
    Number.............. 124
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "MESSAGE_TYPE_X" " "
    "SAPLFMPR" or "LFMPRU05"
    "FM_CO_DOCUMENT_DELETE"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which actions and input led to the error.
Information on where terminated
    Termination occurred in the ABAP program "SAPLFMPR" - in
     "FM_CO_DOCUMENT_DELETE".
    The main program was "SAPLMR1M ".
    In the source code you have the termination point in line 34
    of the (Include) program "LFMPRU05".
Any help.
Regards,
CMC Team.

Hi,
Check following SAP notes:-
1173846 (MM) Termination when deleting prepaid logistics invoices
Reason and Prerequisites
This problem is caused by a program error.
1224772 (MM) Error message FI24 when deleting parked invoices
Reason and Prerequisites
This is due to a program error. The total amount of the parked invoice is '0'.
Regards,
Anand Raichura

Inbound IDOC error while processing Invoice

Hi All,
I received the following error while processing an Invoice on an inbound IDOC:
Field BSEG-MEINS - does not exist in the screen SAPMF05A 0300
Message no. 00349
Diagnosis
The specified field does not exist on the screen
Procedure
Check your batch input data
Any assistance will be greatly appreciated.
Thanks, Inno

Hi
Please check which G/L Accounts were involved and verify that the Field BSEG-MEINS was set to 'optional' in Transaction OB14. The correct Field Status Variant
for the Company Code can be viewed with Transaction OBY6 and the Field
Status Group for G/L Account can be found with Transaction FS00 under
the Create/bank/inter Tab. This should eliminate the Error 00 349.
Regards
Javier

Inbound Idoc to create SD invoice thru VF01

Hello All,
I was looking for an Idoc that allow me to create an SD invoice (and automatically then an FI posting) based on an SD order (as VF01).
I found some consultants talking about INVOIC, others about ACC_BILLING.
But after somes tests, none of the above works as expected. (-may be I am using a worng process code...)
Is there an Inbound Idoc where I can mention the same data as I will do in VF01 to generate an SD Invoice ?
Thank you All

There is no inbound IDoc, to my knowledge, and it'd be a very unusual scenario that would require invoicing through an IDoc interface. As soon as all the preceding transactions have been completed, not sure what sense it would make to wait for some kind of interface to give OK for the invoice creation...
Anyways, there is an option to run billing through a background job, which could be scheduled at regular intervals or based on an event. It'd be a very short program to get a document # and to trigger an event for the job or just run SDBILLDL directly, whichever is preferable.

User Exit for Inbound Idoc Processing of Customer Invoice

Hi all,
I have to extend a standard idoc 'WPUBON01' to include a segment with Header Text Ids to pass header text displayed in VF03.
Can you please share the exit name so as a call to function module save_text be made and the header text gets saved in the respective Header Text Ids.
Thanks in advance.
Radhika
Edited by: Radhika7 on Apr 21, 2011 9:55 AM

Hi Radhika,
Not sure of the actual business scenario of your requirement, anyways you can try the below customer exits, and if they dont work please provide more info on the scenario.
EXIT_SAPLWPUE_102              IDoc WPUBON01 Before Document is Posted
EXIT_SAPLWPUE_104              IDoc WPUBON01 Before Inbound Processing
EXIT_SAPLWPUE_109              IDoc WPUBON01 After Inbound Processing
EXIT_SAPLWPUE_110              IDoc WPUUMS01 Before Posting
My bet would be on EXIT*109 to be of any help.
Regards,
Chen

Payment Terms wrongly getting updated using Inbound Idoc

Hi All,
I have a inbound IDOC which creates new invoice evrery time it gets triggered. In the function module attached with that IDOC there is a logic written to fetch the payment terms from the vendor master LFB1. System should display that Payment terms in tcode MIR4 (Display Invoice) as per the logic written in the IDOC FM. But, It is displaying wrong payment terms.
Select single ZTERM
into v_zterm
from lfb1
where lifnr = p_lifnr.
I have checked while debugging my logic fetches the correct payment terms (20NM) but the same is not getting updated in MIR4 . wrong value (42 Net days ) geting updated. Please suggest what needs to be done to correct this.
Thanks,
VB

Vikas,
Your quesion can be bit more clear. What is that 42 days..?? To my guess based on your payment terms due date might be calculated and kept as 42 days. If you can tell us about 42 days then someone can help you.
Regards
Venkat

Short dump in J1iex while display

Hi
I have come across a short dump while displaying an invoice number (Using tcode J1iex) which was already posted. Dump says there is a conversion error .
Screen name.............. "SAPLJ1IEX"
Screen number............ 0200
Screen field............. "J_1IEXITEM-AVAILABLE_AT1"
Error text............... "FX015: Sign lost."
Can anyone please clarify what can be done in this case.
Regards
Prabhakar.

Hi
Thanks for the reply.
J_1IEXITEM-AVAILABLE_AT1 ( Available CENVAT credit field) is getting a value 0.01- . There is a field conversion problem from ABAP program to Screen display (Dump message) .
This variable has
Technical type description : P(7) DECIMALS 2
Absolute type description: J_1IEXAVLAT1
As such we have applied some notes which is not related to this application.
Please clarify.
Regards
Prabhakar.

Posting of Inbound Invoice doc - INVOIC02

Hello Experts,
      The scenario is this: We are using an Inbound IDoc-INVOIC02, Mesg type-INVOIC to post the document for a specific comp code. We need to change the Exchange rate (document currency and group currency) while posting the IDoc to create the document.
      Can you help us identify the User Exits/BADIs in this Posting process which we can use to access the above field and change accordingly for both Document currency and Group currency, together?
      Any help on this would be greatly appreciated.
Thanks in advance,
Amrita Mitra.

Hi.
   Thank you all for your valuable content. Though it gave me a start, yet I couldn't find the User exit or spot wherein I can change the Exchange rate value before it posts the IDoc. Could you please give any leads on this? A different exchange rate is getting used which is causing the error.
Please advise.
Thanks,
Amrita.

Inbound IDoc to generate Billing Document - t.code VF01

Hi,
which is the inbound idoc to trigger Billing Document.
pls suggest
thanks in advance...
Regards,
Balaji

Hi,
>IDOC name- INVOIC.INVOIC02
INVOIC02 can only be used as outbound from VF01 not as inbound (at least in standard)
unless you know a process code that can be used for inbound?
in general sales invoice can only be created via interface with the use of ERS (selfbilling) scenario
but I'm not sure if this is what you need
Regards,
Michal Krawczyk

EDI 810 Inbound

Hi,
i am trying to post an Inbound Idoc through message type:INVOIC.I have configured every thing and now able to post the Idoc by using WE19,Now i have file in application server with naming format OH_810_xxxxxxx.EDI. I am using the existing FILE port and have given the application server path in INDOUND FILE tab and the FM:EDI_PATH_CREATE_CLIENT_DOCNUM.
the issue is now the file is not picking....how to automate it like when ever the file comes in application server the idoc should be trigered.

Hi
I am working on the Invoice receipt thru EDI-IDoc from Vendors (EDI-810 INBOUND). I am getting certain errors.
Error 1:
Customer , Vendor XXXXXXX not known
Message no. FD110
Error 2:
G/L Account XXXXXXX can only be posted internally.
Message no. F5562
I have tried to trigger IDocs using basic types INVOIC01 and INVOIC02. But all in vain.
Please rush your answer,
Cheers
Maruthi

ABAP dump in MIRO - Invoice reduction

Hi,
I am getting a dump in MIRO for invoice reduction scenario. I am not sure here is the right place to ask for help or I should put in MM forum.
I put a break point and found system trying to modify an structure with index 0 and this is not possible.
Variable name is LV_TABIX and when I set it by 1 during debug I managed to pass the error.
Thanks,
Omid

Hi Juan,
Thanks for your reply in advance.
I think you are right and I have to apply SP SAPKH60406 because the SP level of SAP_APPL is 0002.
At the moment I don't have this SP but it's applied in another system I checked it out by SPAM. Is there any way to export it?
Thanks,
Omid

SAP Smartform Timeout Dump in Production for the invoice form

Hi Friends,
I am working on Invoice Smartform. It is working fine when it is having avg line items. where as in my case one invoice iss having more than 500 line items in production. For this in production it is giving timeout short dump.
In that invoice i am displaying standard fuctionality of invoice form and at the same tim i am displaying Serial Numbers based on delivery and Open Quantity based on Order. So it will take time for back processing.
Insted of Back ground processing is there any other possibility to solve this. If not Please give me some steps how to implement this form in background based on conditions (if it is having more than 200 line items then only i need to run in background else foreground)
Pls give me your valuble inputs.
Thanks,
Srinivas.

Hi Vipin,
Pls provide more details like SP level , Kernel level etc.
I can see two probable reasons:
Incorrect installtion of GUI , pls try reinstalling the GUI and then try
Kernel upgrade but this solely depends on the current level and defer for further investigation.
Best Regards
Umesh

User Exits for Inbound Process

hi all
can any one please give some example user exits in inbound process and explain the omportance of user exits
Thank you,
Swapna

hi
Userxits allow us to add our own functionality to SAP standard program
without modifying it . These are implemented in the form of subroutines and hence are also known as FORM EXITs. The userexits are generally collected in includes and attached to the standard program by the SAP.
Types of User exits
1. Menu Exits
2.Function exits
3.Table exits
4.Screen exits
5.Keyword exits
6.Field exits.
also refer to the links below.. can get more info on user exits
list of user exits
http://www.planetsap.com/userexit_main_page.htm
can also get the list of user exits thru..
Tcode: CMOD -> Utilities -> SAP Enhancements -> F8 Execute
User Exits Notes:
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://help.sap.com/saphelp_nw04/helpdata/en/81/8c5738ee806b0ee10000009b38f889/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec07a25db911d295ae0000e82de14a/content.htm
below are some of the useful invound and outbound userexits
IDoc Inbound User Exits
1. ACC_BILLING
Accounting: Post invoice (OAG: LOAD RECEIVABLE)
 ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
2. ACC_EMPLOYEE_EXP
FI/CO: HR posting GL (AcctngEmplyeeExenses)
 ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
3. ACC_EMPLOYEE_PAY
FI/CO: HR posting AP (AcctngEmplyeePaybles)
 ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
4. ACC_EMPLOYEE_REC
FI/CO: HR posting AR (AcctngEmplyeeRcvbles)
 ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
5. ACC_GL_POSTING
Accounting: General G/L account posting
 ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
6. ACC_GOODS_MOVEMENT
Accounting: Post goods movement (OAG: POST JOURNAL)
 ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
7. ACC_INVOICE_RECEIPT
Accounting: Post invoice receipt (OAG: LOAD PAYABLE)
 ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
8. ACLPAY Accounting: Inbound invoice
 ACCID001 EXIT_SAPLACC1_031 IDoc ACLPAY: Userexit for creditor in accounting document
 ACCID001 EXIT_SAPLACC1_032 IDoc ACLPAY: Userexit for GL posting in accounting document
 ACCID001 EXIT_SAPLACC1_033 IDoc ACLPAY: Userexit for taxes in accounting document
9. ACLREC
Accounting: Billing document
 ACCID001 EXIT_SAPLACC1_011 IDoc ACLREC: Userexit for debitor in accounting document
 ACCID001 EXIT_SAPLACC1_012 IDoc ACLREC: Userexit for GL posting in accounting document
 ACCID001 EXIT_SAPLACC1_013 IDoc ACLREC: Userexit for taxes
10. ACPJMM
Posting in accounting from materials management
 ACCID001 EXIT_SAPLACC1_021 IDoc ACPJOU: Userexit for GL posting in accounting document
11. ARTMAS
Create and change of material master (Retail)
 MGV00003 EXIT_SAPL1001_003 Enhancement for article master: IDoc inbound
12. BLAOCH
Purchasing contract change
 MM06E002 EXIT_SAPLEINN_001 Customer enhancements for Idocs: contracts
 MM06E002 EXIT_SAPLEINN_002 Customer enhancements for Idocs: contracts
 MM06E002 EXIT_SAPLEINN_003 Customer enhancements for Idocs: contracts
13. BLAORD
Purchasing contracts
 MM06E002 EXIT_SAPLEINN_001 Customer enhancements for Idocs: contracts
 MM06E002 EXIT_SAPLEINN_002 Customer enhancements for Idocs: contracts
 MM06E002 EXIT_SAPLEINN_003 Customer enhancements for Idocs: contracts
14. BLAREL
Release order documentation for distributed contracts
 MM06E001 EXIT_SAPLEINM_004 Customer enhancements for release documentation inbound
15. COND_A
Conditions: master data for price determination
 VKOI0001 EXIT_SAPLVKOI_001 Interchange of Conditions: Inbound Processing Modifications E1KOMG Segment
 VKOI0001 EXIT_SAPLVKOI_002 Interchange of Conditions: Inbound Processing Customer Segments
16. CREMAS
Distribute vendor master
 VSV00001 EXIT_SAPLKD02_001 Inbound: Read and process vendor segments
17. DEBMAS
Customer master
 VSV00001 EXIT_SAPLVV02_001 Inbound: Read and update additional customer master segments
18. DELINS
Delivery schedule/JIT schedule
 VED40001 EXIT_SAPLVED4_001 Modify Warnings in Table XVBFS
 VED40001 EXIT_SAPLVED4_002 Copying Data to Screens for Incoming EDI Docs
 VED40001 EXIT_SAPLVED4_003 Customer-Specific Changes in the Workflow Parameters
 VED40001 EXIT_SAPLVED4_004 Determination of mail receiver during inbound processing
19. DESADV
Delivery: Shipping notification
 LMELA010 EXIT_SAPLEINM_010 Customer enhancement shipping notification inbound: line item
 MM06E001 EXIT_SAPLEINM_006 Customer enhancements for shipping notification inbound
 V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
 V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
 V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
 V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
 V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
 V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
20. DOCMAS
Master document
 CVDS0001 EXIT_SAPLCVALE_001 Userexit for ALEDVS (DOCMAS inbound)
21. DOLMAS
Document-object links
 CVDS0001 EXIT_SAPLCVALE_003 Userexit for ALEDVS (DOLMAS inbound)
22. EDLNOT
EDL delivery notes
 VED40001 EXIT_SAPLVED4_001 Modify Warnings in Table XVBFS
 VED40001 EXIT_SAPLVED4_002 Copying Data to screens for Incoming EDI Docs
 VED40001 EXIT_SAPLVED4_003 Customer-Specific Changes in the Workflow Parameters
 VED40001 EXIT_SAPLVED4_004 Determination of mail receiver during inbound processing
23. FIDCC1
Send entire FI documents (user exit 003/4)
 F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
 F050S002 EXIT_SAPLF050_004 FIDCC1 IDoc inbound: Change IDoc / do not process
 F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
 F050S005 EXIT_SAPLF050_009 IDoc inbound: change fields in parked documents
24. FIDCC2
Send entire FI documents (user exit 005/6)
 F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
 F050S003 EXIT_SAPLF050_006 FIDCC2 IDoc inbound: Change IDoc / do not process
 F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
 F050S005 EXIT_SAPLF050_009 IDoc inbound: change fields in parked documents
25. FIDCMT
Sending single items for FI-GL
 F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
 F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
26. FINSTA
Bank Statement
 FEDI0005 EXIT_SAPLIEDP_201 FI-EDI: inbound - bank statement/ Lockbox - Final processing
 FEDI0005 EXIT_SAPLIEDP_202 FI-EDI: inbound - bank statement/ Lockbox - Processing of segments
27. FIROLL
General ledger rollup for FI-GL (delta f. line items FIDCMT)
 F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
28. GSVERF
Cred. memo procedure
 VED50001 EXIT_SAPLVED5_001 User Exit for Condition Value Tolerances in the Self- Billing Procedure
 VED50001 EXIT_SAPLVED5_005 Customer-Specific Changes in Workflow Parameters
 VED50001 EXIT_SAPLVED5_006 Copying Data to Screens for Incoming EDI Docs
29. HRMD_A
HR: Master data and organizational data (appl. system)
 RHALE001 EXIT_SAPLRHA0_002 HR-CA: ALE inbound processing: Export parameter
 RHALE001 EXIT_SAPLRHAL_002 HR-CA: ALE inbound processing: Change info type data
 RHALE001 EXIT_SAPLRHAL_004 HR-CA: ALE inbound processing: conversion segment/ info type
30. INFREC
Purchasing info record
 MMAL0004 EXIT_SAPLMEAI_004 ALE source list distribution: inbound processing userdefined data
 MMAL0004 EXIT_SAPLMEAI_003 ALE purchasing info record distribution: inbound processing segments
31. INVOIC
Invoice / Billing document
 FEDI0001 EXIT_SAPLIEDI_001 FI-EDI: Invoice receipt - Determine G/L account per invoice line
 FEDI0001 EXIT_SAPLIEDI_002 FI-EDI: Invoice receipt - Determine add. acct assignm. per line item
 FEDI0001 EXIT_SAPLIEDI_003 FI-EDI: Invoice receipt - Fill the screen field 'Allocation'
 FEDI0001 EXIT_SAPLIEDI_004 FI-EDI: Invoice receipt - Determine the segment text
 FEDI0001 EXIT_SAPLIEDI_005 FI-EDI: Invoice receipt - Determine the name of the BDC session
 FEDI0001 EXIT_SAPLIEDI_011 MM-EDI: Invoice receipt - Determine purchase order item
 FEDI0001 EXIT_SAPLIEDI_101 FI-EDI: Invoice receipt INVOIC01 - additional assignment
 FEDI0001 EXIT_SAPLIEDI_102 FI-EDI: Invoice receipt INVOIC01 - add data
 FEDI0001 EXIT_SAPLIEDI_111 MM-EDI: Invoice receipt INVOIC01 - additional assignment
 FEDI0001 EXIT_SAPLIEDI_112 MM-EDI: Invoice receipt INVOIC01 - add data
 MRMH0002 EXIT_SAPLMRMH_011 Logistics Invoice Verification:inboud EDI message, company code
 MRMH0002 EXIT_SAPLMRMH_012 Logistics Invoice Verification:inboud EDI message, control flags
 MRMH0002 EXIT_SAPLMRMH_013 Logistics Invoice Verification:inboud EDI message, assignment
 MRMH0002 EXIT_SAPLMRMH_014 Logistics Invoice Verification:inboud EDI message, segments
 MRMH0002 EXIT_SAPLMRMH_015 Logistics Invoice Verification:inbound EDI message, before posting
32. LIKOND
Listing conditions
 WSOR0001 EXIT_SAPLWSOI_001 Enhancement for assortments: inbound IDoc
33. MATMAS
Material Master
 MGV00001 EXIT_SAPLMV02_002 Enhancement for material master IDoc: Update
34. MRESCR
Create reservation
 SAPLMEWB EXIT_SAPLMEWB_001 Customer exit for processing of reservations via BAPIs
35. ORDCHG
Purchase order/order change
 MM06E001 EXIT_SAPLEINM_012 MM EDI ORDERS/ ORDCHG: enhancement configuration
 MM06E001 EXIT_SAPLEINM_013 MM EDI ORDERS/ ORDCHG: enhancement configuration
 VEDB0001 EXIT_SAPLVEDB_001 SD EDI incoming change orders: read additional data from IDoc
 VEDB0001 EXIT_SAPLVEDB_002 SD EDI incoming change orders: additional data for dynpros
 VEDB0001 EXIT_SAPLVEDB_003 SD EDI incoming change orders: further activities after calling
 VEDB0001 EXIT_SAPLVEDB_004 SD EDI incoming change orders: closing activities per
 VEDB0001 EXIT_SAPLVEDB_005 SD EDI incoming change orders: closing activities by order block
 VEDB0001 EXIT_SAPLVEDB_006 SD EDI incoming change orders: setting order type
 VEDB0001 EXIT_SAPLVEDB_007 SD EDI incoming change orders: additional checks of IDoc
 VEDB0001 EXIT_SAPLVEDB_008 SD EDI incoming change orders: error handling
 VEDB0001 EXIT_SAPLVEDB_009 SD EDI incoming change orders: additional checks of IDoc segments
 VEDB0001 EXIT_SAPLVEDB_010 SD EDI incoming change orders: manipulation of status ecords
 VEDB0001 EXIT_SAPLVEDB_012 SD EDI incoming change orders: change internal table
36. ORDERS
Purchase order / order
 MCP20008 EXIT_SAPLMCP2_008 User exit: Processing of purchase order header
 MCP20008 EXIT_SAPLMCP2_009 User exit: Processing of purchase order item
37. ORDERS
Purchase order / order
 MM06E001 EXIT_SAPLEINM_012 MM EDI ORDERS/ ORDCHG: enhancement configuration
 MM06E001 EXIT_SAPLEINM_013 MM EDI ORDERS/ ORDCHG: enhancement configuration
 VEDA0001 EXIT_SAPLVEDA_001 SD EDI incoming orders: read additional data from IDoc
 VEDA0001 EXIT_SAPLVEDA_002 SD EDI incoming orders: additional data for dynpros
 VEDA0001 EXIT_SAPLVEDA_003 SD EDI incoming orders: further activities after calling
 VEDA0001 EXIT_SAPLVEDA_004 SD EDI incoming orders: closing activities per order
 VEDA0001 EXIT_SAPLVEDA_005 SD EDI incoming orders: closing activities by order block
 VEDA0001 EXIT_SAPLVEDA_006 SD EDI incoming orders: setting order type
 VEDA0001 EXIT_SAPLVEDA_007 SD EDI incoming orders: number of ordering party
 VEDA0001 EXIT_SAPLVEDA_008 SD EDI incoming orders: error handling
 VEDA0001 EXIT_SAPLVEDA_009 SD EDI incoming orders: additional checks of IDoc segments
 VEDA0001 EXIT_SAPLVEDA_010 SD EDI incoming orders: manipulation of status records
 VEDA0001 EXIT_SAPLVEDA_011 SD EDI incoming orders: change internal table
 WVFB0001 EXIT_SAPLWVFB_002 Customer exists for store order PO confirmationdata seg.
38. ORDRSP
Purchase order / order confirmation
 MM06E001 EXIT_SAPLEINM_005 Customer enhancements for order confirmation inbound
 MM06E001 EXIT_SAPLEINM_007 Customer enhancements inbound confirmation: reading
 MM06E001 EXIT_SAPLEINM_008 Customer enhancements inbound confirmation: final
 WVMI0001 EXIT_SAPLWVMI_003 ORDRSP VMI inbound, modification before creating purchase order
39. PORDCR
Create purchase order
 SAPLMEWP EXIT_SAPLMEWP_002 Customer exit for processing of purchase orders via BAPIs
40. PREQCR
Create purchase requisition
 SAPLMEWQ EXIT_SAPLMEWQ_001 Customer exit for processing of requisitions via BAPIs
41. PROACT
Stock and sales data
 WVMI0001 EXIT_SAPLWVMI_002 IDoc PROACT inbound: prior to processing
42. REMADV
Payment advice
 FEDI0002 EXIT_SAPLIEDP_101 FI-EDI: Incoming pmnt advice - Extended allocatn of IDOC -> applicatn data
 FEDI0002 EXIT_SAPLIEDP_102 FI-EDI: Incoming pmnt adivce - Closing allocatn of IDOC -> applicatn data
43. REQOTE
Inquiry
 VEDQ0001 EXIT_SAPLVEDQ_001 SD EDI inbound inquiry: read additional data from IDoc
 VEDQ0001 EXIT_SAPLVEDQ_002 SD EDI inbound inquiry: additional data for dynpros
 VEDQ0001 EXIT_SAPLVEDQ_003 SD EDI inbound inquiry: further activities after calling
 VEDQ0001 EXIT_SAPLVEDQ_004 SD EDI inbound inquiry: closing activities per inquiry
 VEDQ0001 EXIT_SAPLVEDQ_005 SD EDI inbound inquiry: closing activities by inquiry block
 VEDQ0001 EXIT_SAPLVEDQ_006 SD EDI inbound inquiry: setting inquiry type
 VEDQ0001 EXIT_SAPLVEDQ_007 SD EDI inbound inquiry: number of sold-to party
 VEDQ0001 EXIT_SAPLVEDQ_008 SD EDI inbound inquiry: error handling
 VEDQ0001 EXIT_SAPLVEDQ_009 SD EDI inbound inquiry: additional checks of IDoc segments
 VEDQ0001 EXIT_SAPLVEDQ_010 SD EDI inbound inquiry: manipulation of status records
 VEDQ0001 EXIT_SAPLVEDQ_011 SD EDI inbound inquiry: change internal table
44. SBINV
Credit memo procedure with invoice creation
 VED50001 EXIT_SAPLVED5_002 User Exit for messages in the Self-Billing Procedure SBINV
 VED50001 EXIT_SAPLVED5_003 User Exit for Tolerances in the Self- Billing Procedure SBINV
 VED50001 EXIT_SAPLVED5_004 Customer-Function for changing invoice data SBINV
 VED50001 EXIT_SAPLVED5_005 Customer-Specific Changes in Workflow Parameters
 VED50001 EXIT_SAPLVED5_006 Copying Data to Screens for Incoming EDI Docs
45. SDPACK
Packing confirmation
 VMDE0001 EXIT_SAPLVMDE_001 Shipping Interface: Error Handling - Inbound IDoc
 VMDE0004 EXIT_SAPLVMDE_004 Shipping Interface: Message SDPACK (Packing, Inbound)
46. SDPICK
Picking confirmation
 VMDE0001 EXIT_SAPLVMDE_001 Shipping Interface: Error Handling - Inbound IDoc
 VMDE0003 EXIT_SAPLVMDE_003 Shipping Interface: Message SDPICK (Picking, Receipt)
47. SHP_IBDLV_CONFIRM_DECENTRAL
Confirmation (Inbound Delivery)
 V50B0001 EXIT_SAPLV50I_002 User exit for BAPI Verification of Inbound Deliveries
48. SHP_IBDLV_SAVE_REPLICA
BAPI Function Module for Duplication of Outbound Deliveries
 V50B0001 EXIT_SAPLV50I_001 User exit for BAPI Duplication of Inbound Deliveries
49. SHP_OBDLV_CONFIRM_DECENTRAL
Confirmation (Customer Delivery)
 V50B0001 EXIT_SAPLV50I_004 User exit for BAPI Verification of Outbound Deliveries
50. SHP_OBDLV_SAVE_REPLICA
BAPI Function Module for Duplication of Outbound Deliveries
 V50B0001 EXIT_SAPLV50I_003 User exit for BAPI Duplication of Outbound Deliveries
51. SHPCON
Delivery: Shipping confirmation
 V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
 V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
 V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
 V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
 V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
 V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
52. SHPMNT
Shipping outbound
 V55K0020 EXIT_SAPLV55K_020 IDoc SHPMNT: Modification Control/ Data before processing
 V55K0021 EXIT_SAPLV55K_021 Processing of segments IDoc SHPMNT
 V55K0022 EXIT_SAPLV55K_022 Update of user defined tables for inbound IDoc SHPMNT
53. SRCLST
Source List
 MMAL0002 EXIT_SAPLMEAI_001 ALE source list distribution: inbound processing segments
 MMAL0002 EXIT_SAPLMEAI_002 ALE source list distribution: inbound processing user defined data
54. SRVMAS
Master data service master
 BASI0001 EXIT_SAPLBASI_001 Userexit IDoc inbound service master: segment
 BASI0001 EXIT_SAPLBASI_002 Userexit IDoc inbound service master: database
55. TPSSHT
Shipping planning system: Transfer planned shipments
 V56I0010 EXIT_SAPLV56I_010 IDoc TPSSHT01: Input of planned shipments: Modification of IDoc segments
 V56I0010 EXIT_SAPLV56I_011 IDoc TPSSHT01: Input of planned shipments: modification of transport tab, processing
 V56I0010 EXIT_SAPLV56I_012 IDoc TPSSHT01: Input of planned shipments: update of own tables
56. WHSCON
Delivery: Stock confirmation
 V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
 V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
 V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
 V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
 V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
 V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
57. WMBBIN
Block Storage Bins
 MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
 MWMIDI04 EXIT_SAPLLIDI_004 Customer enhancement for IDoc WMBBID01
58. WMCATO
Reversal/Reversal request for transfer order
 MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
 MWMIDI03 EXIT_SAPLLIDI_003 Customer enhancement for IDoc WMCAI01
59. WMINVE
Inventory count input
 MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
 MWMIDO09 EXIT_SAPLLMDE_003 Customer enhancement for message WMINVE
 MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
60. WMMBXY
IDoc Report goods movements in IM
 MWMIDO08 EXIT_SAPLLMDE_002 Customer enhancement for message WMMBXY (goods movement) inbound
61. WMSUMO
Move storage unit
 MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
 MWMIDI06 EXIT_SAPLLIDI_006 Customer enhancement for IDoc WMSUID01
62. WMTOCO
Transfer order
 MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
 MWMIDI02 EXIT_SAPLLIDI_002 Customer enhancement for IDoc WMTCID01
63. WMTORD
Transfer order
 MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
 MWMIDO10 EXIT_SAPLLMDE_004 Customer enhancement for message WMTORD (Create TO) inbound
 MWMIDO11 EXIT_SAPLLMDE_005 Customer enhancement for message WMTORD (Create TO) inbound
64. WMTREQ
Create/Cancel transfer order
 MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
 MWMIDI05 EXIT_SAPLLIDI_005 Customer enhancement for IDoc WMTRID01
65. WPUBON
POS interface: Upload sales documents (compressed)
 WPUE0002 EXIT_SAPLWPUE_104 IDoc WPUBON01: prior to inbound processing
 WPUE0002 EXIT_SAPLWPUE_105 Check, whether transaction of IDoc WPUBON01 is compressable
 WPUE0002 EXIT_SAPLWPUE_106 IDoc WPUBON01: processing user segment
 WPUE0002 EXIT_SAPLWPUE_109 IDoc WPUBON01: after to inbound processing
66. WPUFIB
POS interface: Upload Fin.Acc. interface SRS/POS
 WPUE0002 EXIT_SAPLWPUE_130 IDoc WPUFIB01: prior to update
 WPUE0002 EXIT_SAPLWPUE_131 IDoc WPUFIB01: processing user
67. WPUFIB
POS interface: Upload Fin.Acc. interface SRS/POS
 WPUE0002 EXIT_SAPLWPUE_132 IDoc WPUFIB01: prior to inbound processing
 WPUE0002 EXIT_SAPLWPUE_139 IDoc WPUFIB01: after to inbound processing
68. WPUKSR
POS upload cashier data
 WPUE0002 EXIT_SAPLWPUE_120 IDoc WPUKSR01: prior to update
 WPUE0002 EXIT_SAPLWPUE_122 IDoc WPUKSR01: processing user segment
 WPUE0002 EXIT_SAPLWPUE_123 IDoc WPUKSR01: prior to inbound processing
 WPUE0002 EXIT_SAPLWPUE_129 IDoc WPUKSR01: after to inbound processing
 WPUE0002 EXIT_SAPLWPUE_152 IDoc WPUTAB01: prior to inbound processing
 WPUE0002 EXIT_SAPLWPUE_159 IDoc WPUTAB01: after to inbound processing
69. WPUUMS
POS interface: Upload sales data (compressed)
 WPUE0002 EXIT_SAPLWPUE_110 IDoc WPUUMS01: prior to update
 WPUE0002 EXIT_SAPLWPUE_112 IDoc WPUUMS01: prior to inbound processing
 WPUE0002 EXIT_SAPLWPUE_113 IDoc WPUUMS01: processing user segment
 WPUE0002 EXIT_SAPLWPUE_119 IDoc WPUUMS01: after to inbound processing
70. WPUWBW
POS interface: Upload goods movements
 WPUE0002 EXIT_SAPLWPUE_140 IDoc WPUWBW01: prior to update
 WPUE0002 EXIT_SAPLWPUE_141 IDoc WPUWBW01: processing user segment
 WPUE0002 EXIT_SAPLWPUE_142 IDoc WPUWBW01: prior to inbound processing
 WPUE0002 EXIT_SAPLWPUE_149 IDoc WPUWBW01: after to inbound processing
71. WVINVE
Store physical inventory / sales price revaluation
 WVFI0001 EXIT_SAPLWVFI_001 Inbound IDoc store phys. inv.: override Customizing
 WVFI0002 EXIT_SAPLWVFI_002 Inbound IDoc store phys. inv.: process customer segment
IDoc Outbound User Exits
72. ACCONF
Confirmation of IDoc processing from the application
 ACCID002 EXIT_SAPLACC2_040 IDOC ACCONF: Confirmation of processing in application
73. ACLPAY
Accounting: Inbound invoice
 ACCID002 EXIT_SAPLACC2_030 IDoc ACLPAY: Userexit for header in accounting document (outbound)
 ACCID002 EXIT_SAPLACC2_031 IDoc ACLPAY: Userexit for creditor line (outbound) in accounting document
 ACCID002 EXIT_SAPLACC2_032 IDoc ACLPAY: Userexit for general line (outbound) in accounting document
 ACCID002 EXIT_SAPLACC2_033 IDoc ACLPAY: Userexit for tax line (outbound) in accounting document
74. ACPJMM
Posting in accounting from materials management
 ACCID002 EXIT_SAPLACC2_020 IDoc ACPJOU: Userexit Userexit for GL posting header in accounting document
 ACCID002 EXIT_SAPLACC2_021 IDoc ACPJOU: Userexit Userexit for GL posting line in accounting document
75. ARTMAS
Create and change of material master (Retail)
 MGV00003 EXIT_SAPLMV01_003 Enhancement for article master IDoc: Create
76. BLAORD
Purchasing contracts
 MM06E001 EXIT_SAPLEINM_016 ALE distribution of contracts outbound enhancement for IDocs
 MM06E001 EXIT_SAPLEINM_017 ALE distribution of contracts outbound enhancement for IDocs
77. BLAREL
Purchasing contracts
 MM06E001 EXIT_SAPLEINM_003 Customer enhancements of data segment for outbound release documentation
78. COND_A
Conditions: master data for price determination
 VKOE0001 EXIT_SAPLVKOE_001 Condition Transmission: Derivation of Filter Object E1KOMG
 VKOE0001 EXIT_SAPLVKOE_002 Condition Transmission: Customer segments
79. CREMAS
Distribute vendor master
 VSV00001 EXIT_SAPLKD01_001 Outbound: Create vendor segments
80. DEBMAS
Customer master
 VSV00001 EXIT_SAPLVV01_001 Outbound: Create additional customer master segments
81. DELPKB
KANBAN call
 MPKD0001 EXIT_SAPLMPKD_001 User exit for control record KANBAN, outbound
 MPKD0001 EXIT_SAPLMPKD_002 User exit for EDI
82. DIRDEB
Preauthorized withdrawal
 FEDI0003 EXIT_SAPLIEDP_003 FI-EDI outgoing payments: Save PEXR segments (customer directory)
83. DOCMAS
Master document
 CVDS0001 EXIT_SAPLCVALE_002 Userexit for ALEDVS (DOCMAS outbound)
 CVDS0001 EXIT_SAPLCVALE_005 Userexit for filter (ALE outbound)
84. DOLMAS
Document-object links
 CVDS0001 EXIT_SAPLCVALE_004 Userexit for ALEDVS (DOLMAS outbound)
 CVDS0001 EXIT_SAPLCVALE_005 Userexit for filter (ALE outbound)
85. FIDCC1
Send entire FI documents (user exit 003/4)
 F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
 F050S002 EXIT_SAPLF050_003 FIDCC1 IDoc outbound: Change data / do not send
 F050S004 EXIT_SAPLF050_007 IDoc outbound: change complete IDoc / do not send
86. FIDCC2
Send entire FI documents (user exit 005/6)
 F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
 F050S003 EXIT_SAPLF050_005 FIDCC2 IDoc outbound: Change data / do not send
 F050S004 EXIT_SAPLF050_007 IDoc outbound: change complete IDoc / do not send
 F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
87. FIDCMT
Sending single items for FI-GL
 F050S004 EXIT_SAPLF050_007 IDoc outbound: change complete IDoc / do not send
88. FIPAYM
Payment data
 FIPAYM01 EXIT_SAPLF11A_001 USER-EXIT: message type FIPAYM, header data, outbound
 FIPAYM01 EXIT_SAPLF11A_002 USER-EXIT: message type FIPAYM, reference data, outbound
 FIPAYM01 EXIT_SAPLF11A_003 USER-EXIT: message type FIPAYM, bank data, outbound
 FIPAYM01 EXIT_SAPLF11A_004 USER-EXIT: message type FIPAYM, GL data, outbound
 FIPAYM01 EXIT_SAPLF11A_005 USER-EXIT: message type FIPAYM, partner data, outbound
89. FIROLL
General ledger rollup for FI-GL (delta f. line items FIDCMT)
 F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
90. GSVERF
Cred. memo procedure
 MRMN0001 EXIT_SAPLMRMN_001 Outbound IDoc for ERS/consignment settlement
91. HRMD_A
HR: Master data and organizational data (appl. system)
 RHALE001 EXIT_SAPLRHA0_001 HR-CA: ALE outbound processing: Enhancement for receiver
 RHALE001 EXIT_SAPLRHAL_001 HR-CA: ALE outbound processing: Change IDoc
 RHALE001 EXIT_SAPLRHAL_003 HR-CA: ALE outbound processing: conversion info type / segment
92. INFREC
Purchasing info record
 MMAL0003 EXIT_SAPLMEAO_002 ALE purchasing info record distribution: outbound processing
93. INVOIC
Invoice / Billing document
 LVEDF001 EXIT_SAPLVEDF_001 User_Exit controll data IDoc_Output_Invoic
 LVEDF001 EXIT_SAPLVEDF_002 User_Exit customer enhancement of segments outbound invoice
 LVEDF001 EXIT_SAPLVEDF_003 User_Exit to avoid reading package data
 LVEDF001 EXIT_SAPLVEDF_004 EDI Invoice: customer enhancement for reading additional data
94. KANBAN
KANBAN call
 MPKD0001 EXIT_SAPLMPKD_001 User exit for control record KANBAN, outbound
 MPKD0001 EXIT_SAPLMPKD_002 User exit for EDI
95. LIKOND
Listing conditions
 WSOR0001 EXIT_SAPLWSOE_001 Enhancement for assortments: outbound IDoc
96. MATMAS
Material Master
 MGV00001 EXIT_SAPLMV01_002 Enhancement for material master IDoc: Create
97. ORDCHG
Purchase order/order change
 MM06E001 EXIT_SAPLEINM_001 Customer enhancements for control record: purchasing document, outbound
 MM06E001 EXIT_SAPLEINM_002 Customer enhancements to data segments, purchasing document, outbound
 MM06E001 EXIT_SAPLEINM_011 Final customer enhancement EDI purchase order outbound
98. ORDERS
Purchase order / order
 MM06E001 EXIT_SAPLEINM_001 Customer enhancements for control record: purchasing document, outbound
 MM06E001 EXIT_SAPLEINM_002 Customer enhancements to data segments, purchasing document, outbound
 MM06E001 EXIT_SAPLEINM_011 Final customer enhancement EDI purchase order outbound
99. ORDRSP
Purchase order / order confirmation
 MM06E001 EXIT_SAPLEINM_009 MM EDI ORDRSP: customer enhancements tolerances (quantities/ date/price)
 MM06E001 EXIT_SAPLEINM_014 MM EDI ORDRSP:enhancement price tolerances
 MM06E001 EXIT_SAPLEINM_015 MM EDI ORDRSP: enhancement change of vendor material
 SDEDI001 EXIT_SAPLVEDC_001 Customer enhancement for control record of order confirmation
 SDEDI001 EXIT_SAPLVEDC_002 Customer enhancement for data records of order confirmation
 SDEDI001 EXIT_SAPLVEDC_003 SD EDI ORDRSP: customer enhancement
 SDEDI001 EXIT_SAPLVEDC_004 SD EDI ORDRSP:customer enhancement for reading additional data
 SDEDI001 EXIT_SAPLVEDC_005 SD EDI ORDRSP: customer enhancement for configuration
 SDEDI001 EXIT_SAPLVEDC_006 SD EDI ORDRSP: customer enhancement for configuration structures
 SDEDI001 EXIT_SAPLVEDC_007 SD EDI ORDRSP: customer enhancement for header conditions
 SDEDI001 EXIT_SAPLVEDC_008 SD EDI ORDRSP: customer enhancement for item conditions
 WVFB0001 EXIT_SAPLWVFB_001 Customer exists for store order PO confirmation control seg.
 WVFB0001 EXIT_SAPLWVFB_003 Customer exists for store order PO confirmation data seg.
100. PAYEXT
Extended payment order
 FEDI0003 EXIT_SAPLIEDP_002 FI-EDI outgoing payments: Save PEXR segments (external payments)
 FEDI0004 EXIT_SAPLIEDP_901 FI-EDI outgoing payments: New partner house bank
 FEDI0004 EXIT_SAPLIEDP_902 FI-EDI outgoing payments: End of IDoc payment (VBLNR)
 FEDI0004 EXIT_SAPLIEDP_903 FI-EDI outgoing payments: End of partner house bank
101. PICKSD
Picking data confirmation to customer delivery
 VMDE0002 EXIT_SAPLVMDE_002 Shipping Interface: Message PICKSD (Picking, Outbound)
102. PRDCAT
Product Catalog
 WPCI0001 EXIT_SAPLWPCI_001 User exit for Product cat. IDoc outbound
103. PRDPOS
Product catalog item
 WPCI0001 EXIT_SAPLWPCI_001 User exit for Product cat. IDoc outbound
104. PRICAT
Price list / catalog
 VPRE0001 EXIT_SAPLVPRE_001 PRICAT outbound processing (MAMT AUSP MAW1)
 VPRE0001 EXIT_SAPLVPRE_002 PRICAT outbound processing (control record)
 VPRE0001 EXIT_SAPLVPRE_003 PRICAT outbound processing (IDoc segments)
105. PROACT
Stock and sales data
 WVMI0001 EXIT_SAPLWVMI_001 IDoc PROACT outbound: final action prior to sending
106. REMADV
Payment advice
 FEDI0003 EXIT_SAPLIEDP_001 FI-EDI: Outgoing pmnt advice - Create extension of segments/ new segments
107. REQOTE
Inquiry
 VEDE0001 EXIT_SAPLVEDE_001 Customer enhancement for control record of outbound quotation
 VEDE0001 EXIT_SAPLVEDE_003 SD EDI REQOTE: customer enhancement
 VEDE0001 EXIT_SAPLVEDE_002 Customer enhancement for data records of outbound quotation
 VEDE0001 EXIT_SAPLVEDE_004 SD EDI REQOTE: customer enhancement for reading additional data
 VEDE0001 EXIT_SAPLVEDE_005 SD EDI REQOTE: customer enhancement for configuration
 VEDE0001 EXIT_SAPLVEDE_006 SD EDI REQOTE: customer enhancement for configuration structures
 VEDE0001 EXIT_SAPLVEDE_007 SD EDI REQOTE: customer enhancement for header conditions
 VEDE0001 EXIT_SAPLVEDE_008 SD EDI REQOTE: customer enhancement for item conditions
108. SRCLST
Source List
 MMAL0001 EXIT_SAPLMEAO_001 ALE source list distribution: outbound processing
109. SRVMAS
Master data service master
 BASO0001 EXIT_SAPLBASO_001 Enhancement: service master, check standard service catalog
 BASO0001 EXIT_SAPLBASO_002 Userexit IDoc service master: receiver determination
110. SYPART
Partner profiles
 SIDOC002 EXIT_SAPLEDI6_001 CA-EDI, Partner-IDoc: Exit after segment E1EDPP1
 SIDOC002 EXIT_SAPLEDI6_002 CA-EDI, Partner-IDoc: Exit after segment E1ADRM0
 SIDOC002 EXIT_SAPLEDI6_003 CA-EDI, Partner-IDoc: Final exit before sending
 SIDOC002 EXIT_SAPLEDI6_004 CA-EDI, Partner-IDoc: Exit after segment E1ADRP0
 SIDOC002 EXIT_SAPLEDI6_005 CA-EDI, Partner-IDoc: Exit after segment E1ADRE0
 SIDOC002 EXIT_SAPLEDI6_007 CA-EDI, Partner-IDoc: Exit after segment E1EDP13
 SIDOC002 EXIT_SAPLEDI6_008 CA-EDI, Partner-IDoc: Exit after segment E1EDP21
111. TPSDLS
Shipping planning system: Transfer delivery
 V56I0001 EXIT_SAPLV56I_001 IDoc TPSDLS: Modification of delivery header group
 V56I0002 EXIT_SAPLV56I_002 IDoc TPSDLS: Modification of delivery item group
 V56I0003 EXIT_SAPLV56I_003 IDoc TPSDLS: Modification of package data group
 V56I0004 EXIT_SAPLV56I_004 IDoc TPSDLS: Modification of entire IDoc
 V56I0005 EXIT_SAPLV56I_005 IDoc TPSDLS: Modif. of delivery items relevant to shipment
 V56I0006 EXIT_SAPLV56I_006 IDOC TPSDLS: User-defined determ. for location substitution
 V56I0020 EXIT_SAPLV56I_020 IDoc control record modification in interface SD-TPS
112. WBBDLD
Assortment list: Material data
 WBBE0001 EXIT_SAPLWBBI_001 Modification of replenishment list IDoc
113. WMCATO
Reversal/Reversal request for transfer order
 MWMIDO02 EXIT_SAPLLIDO_002 Customer enhancement for IDoc WMCAID01
114. WMINVE
Inventory count input
 MWMIDO04 EXIT_SAPLLIDO_004 Customer enhancement for IDoc WMIVID01
115. WMRREF
Release reference number
 MWMIDO03 EXIT_SAPLLIDO_003 Customer enhancement for IDoc WMRRID01
116. WMTORD
Transfer order
 MWMIDO01 EXIT_SAPLLIDO_001 Customer enhancement for IDoc WMTOID01
117. WP_EAN
POS interface: Upload / Download EAN assignments
 WPDA0001 EXIT_SAPLWPDA_003 POS interface: Modification of IDoc data for EAN references
118. WP_PER
POS interface: Upload / Download person data
 WPDA0001 EXIT_SAPLWPDA_008 POS interface: Modification of IDoc data for person related data
 WPDA0001 EXIT_SAPLWPDA_013 POS interface: Add. Change pt. Analysis for WP_PER
119. WP_PLU
POS interface: Upload / Download material master
 WPDA0001 EXIT_SAPLWPDA_002 POS interface: Modification of IDoc data for material master
 WPDA0001 EXIT_SAPLWPDA_009 POS interface: Add. Change pt. Analysis for WP_PLU
120. WPDCUR
POS interface: Download exchange rates
 WPDA0001 EXIT_SAPLWPDA_006 POS interface: Modification of IDoc data for exchange rates
121. WPDNAC
POS interface: Download products
 WPDA0001 EXIT_SAPLWPDA_005 POS interface: Modification of IDoc data for follow-on items
 WPDA0001 EXIT_SAPLWPDA_011 POS interface: Add. Change pt. Analysis for WPDNAC
122. WPDSET
POS interface: Download set assignments
 WPDA0001 EXIT_SAPLWPDA_004 POS interface: modification of IDoc data for set assignments
123. WPDSET
POS interface: Download set assignments
 WPDA0001 EXIT_SAPLWPDA_010 POS interface: Add. Change pt. Analysis for WPDSET
124. WPDTAX
POS interface: Download tax rates
 WPDA0001 EXIT_SAPLWPDA_007 POS interface: modification of IDoc data for taxes
125. WPDWGR
POS interface: Download material group master
 WPDA0001 EXIT_SAPLWPDA_001 POS interface: Modification of IDoc data for material groups
 WPDA0001 EXIT_SAPLWPDA_012 POS interface: Add. Change pt. Analysis for WPDWGR
126. WPUBON
POS interface: Upload sales documents (compressed)
 WPUE0002 EXIT_SAPLWPUE_102 IDoc WPUBON01: prior to update
127. WTADDI
Additionals
 WTAD0001 EXIT_SAPLWTIP_001 Enhancements to Additionals IDoc
128. WTADDI_CVB1
Additionals w/o 06
 WTAD0001 EXIT_SAPLWTIP_001 Enhancements to Additionals IDoc
General IDoc User Exits
 ALE00001 EXIT_RBDPROSE_001 Old: exit for converting preproduction system to production
 ALE00001 EXIT_SAPLBD11_001 User exit for the IDOC version changer
 BDMO0001 EXIT_SAPLBDMO_001 Old: Enhancement to the ALE distribution reference model
 KKCD0001 EXIT_SAPFKCIM_001 SAP-EIS: User exit for data compression of sender records (used for IDoc conversion)
 KKCD0001 EXIT_SAPFKCIM_002 SAP-EIS: User exit for data summ. Of summarized records befo (used for IDoc conversion)
===
User exits for Pricing.
1.USEREXIT_PRICING_PREPARE_TKOMK (module pool SAPLV60A, program RV60AFZZ
2.USEREXIT_PRICING_PREPARE_TKOMP (module pool SAPLV60A, program RV60AFZZ)
3.USEREXIT_FIELD_MODIFICATION
4.USEREXIT_FIELD_MODIFIC_KZWI
5.USEREXIT_FIELD_MODIFIC_KOPF
User exits for Sales order
1USEREXIT_DELETE_DOCUMENT
2USEREXIT_FIELD_MODIFICATION
3.USEREXIT_MOVE_FIELD_TO_VBAK
4.USEREXIT_NUMBER_RANGE
5.USEREXIT_SAVE_DOCUMENT
User exits for billing
1.USEREXIT_ACCOUNT_PREP_KOMKCV (Module pool SAPLV60A, program RV60AFZZ)
2.USEREXIT_ACCOUNT_PREP_KOMPCV
3USEREXIT_NUMBER_RANGE_INV_DATE (Module pool SAPLV60A, program RV60AFZC)
4USEREXIT_PRINT_ITEM (Module pool SAPLV61A, program RV61AFZB
5.USEREXIT_PRINT_HEAD (Modulpool SAPLV61A, Programm RV61AFZB)
====
Reward if USeful
Thanx & regards
Naren..

Error in sending Idoc :: Urgent

HI
we are trying to send Idoc DELINS and ORDERS to SUS system. when sending the idoc the following error occurs in SUS
StandaredMessageFault
An error occured within XI interface: An exception with the type CX_GDT_CONVERSION occured but was neithered handled locally nor declared in a RAISING clause Program: SAPLBBP_BD_MAPPING_SAPXML1; Include : ; Line
How ever the same works fine in Dev and QAS servers
Regards,
Anand

Hi
Please provide SRM-SUS and XI Version details.
Please go through the SAP OSS Notes, which will help ->
Note 782755 - Control indicator is not transferred from MM to SUS
Related Notes
Note 1062864 - Control indicator is not transferred from MM to SUS
Note 313925 - Example exit for EDI outbound processing (e.g. purchase order
Other OSS Notes ->
Note 885825 XML inbound: Dump in QuoteItemReferenceVersionID
Note 825169 XML: Bid currency in bid invitation
Note 819953 SRM 4.0 of SAP XML output of partner address data
Note 723680 Corrections in the mapping of SAP XML messages
Note 723594 - SRM 4.0 XML confirmation mapping error
Do let me know.
Regards
- Atul

NFe 3.10 Inbound - Dump na etapa Simular Invoice

Similar Messages

Maybe you are looking for