NFL Network no picture on the HD channel

I do not have a picture on the NFL network HD channel anyone know of any problems

JohnCF wrote:
My STB was not showing NFL channel yesterday but it's not just limited to the NFL Network CHannel.  Anytime I turn on my DVR and a channel refuses to play, I have to go to the auto-correct tool for the STB and wait for it to run the correction and reboot.  After the reboot the missing channel usually shows up again.  I also have instances where recordings won't start, it just continues to show the channel I was watching even though it says the recording is playing.  Once again, the auto-correct has to be run with a reboot.
I sometimes have to run this daily, but usually only 3 or 4 times a week.  It's just the nature of the poorly programmed equipment we have to use.  There is no solution other than to wait for Verizon to catch up with the rest of the DVR world or to go get a Tivo and send your FiOS box back in.
Actually, there is another solution that you apparently have not tried.  The symptoms you speak of (a single channel reliability problem) are often caused by a poor coax connector or splitter that can be fixed by removing and reseating all connectors, expecially the one at the back of the STB.  If your STB continues with a problem, report it to Verizon and allow them to send you a new STB.  Since many of us have few if any problems with the FiOS DVR, you assertion about the "nature" of the equipment is not supported by the experience of those of us that don't have your problems.

Similar Messages

  • NFL Network Connection Issues

    Hello - my connection keeps dropping out, lots of pixelation on NFL Network on my main X1 device. Signal says full, and a box reset 5 minutes ago did nothing.
    Really nervous about the Mayweather fight tonight... Is there a problem in my end?

    My thoughts are you have fixable issues... once you call Comcast and get a tech out to your house.
    I HIGHLY doubt you will fix this without outside help.
    Chaos744 wrote:
    Hello - the problem still exists, but I've been so busy with work / school that I never had a technician come by.  We have a signal amplifier on my DSL modem, perhaps this is something that is necessary at all box locations?  The NFL Network seems to be the only channel to have this problem on a consistent basis though... thoughts? 

  • NFL NETWORK V CAST GONE

    Anyone know why the NFL NETWORK is gone on the V CAST I added to my alias2?  It was nice for two days. Customer service was no help and I am about to cancel the v cast on my multimedia phone. I am wondering if Verizon just wants me to buy a smartphone to get the new NFL MOBILE being offered.. This really makes me mad! ARGHHHHH!

    Unfortunately, NFL mobile is not currently available  for 3G Multimedia phones or simple feature phones. For a complete list of current compatible devices, click HERE then click compatible phones. I apologize for the inconvenience.

  • Is posible to replace one of the RGB channels???

    hii everyone , i have a picture where the Blue channel is totaly black and noise, so i to know if is posible delete this and
    create a copy a of the green or red channel and apply this as blue channel ???????
    thanks

    Duplicate the image layer. Convert it to a smart object. Open the smart object. Convert it to LAB. Surface blur the A and B channels to get rid of the noise and nasties. Then save and close the smart object and use the advanced blending dialog to have only the blue channel blend with the layers below.

  • What happened to the NFL Network

    HOw come I don't get the NFL Network ,Everytime I press channel 88 it goes to the NHL Channel, what gives
    Solved!
    Go to Solution.

    KJH278 wrote:
    HOw come I don't get the NFL Network ,Everytime I press channel 88 it goes to the NHL Channel, what gives
    Well, they are showing the Eagles/Jets game right now, I am watching it. Are you in the "local" area for either team? If so my guess would be that it is blacked out due to the game presumably being available on a local broadcast channel. The channel should come back after the game ends, although you might have to pull the plug and reboot the STB to get it back, some people say they have to do that.
    It is my understanding that this is due to NFL policy.
    Justin
    Verizon FiOS TV, Internet, and phone
    QIP6416, IMG 1.6.2, Build 08.58
    Keller, TX 76248

  • Which is the best channel to use - on overcrowded wireless network ?

    Hi,
    I've had my Airport Express network going for just over a year with no problems, until the last month when my neighbours have all got Broadband for Christmas and now my network is very unstable and I cannot play more than 2 minutes of music until the network disconnects - I have not changed anything in months because "it just worked."
    I found a nifty utility for my iMac which shows other wireless networks and the strength of the signal.
    Three other networks show up, on channels 1 or 11 they all have stonger signals than me even though they are 10 Meters away through brick walls (my closest neighbours do not have wireless, so I am assuming it must be at least two houses away in either direction.)
    I have changed my network to run on channel 7 and iTunes now streams properly without regular drop-outs.
    Now, I am wondering, my network is set-up as "hidden" and does not show up in the network scanning utility, so logically some of my neighbours may also have "hidden" networks - how can I tell if any of them are using the same channel as me ?
    Anyone got any ideas or advice ?
    Thanks

    I use the 'iStumbler Spectrum widget', which shows me how much congestion there is. After identifying where the most congestion is, its simply a matter of identifying which of the channels without much congestion works best for you. There isn't really a magic formula, though trying different settings until you have a better signal to noise ratio is all I can suggest.
    Also, remember that 2.4GHz phones can also cause increased noise.

  • The audio is played through the tv, but the picture plays the first still shot of the moment it is connected then says a message saying "we're sorry" then something about the network provider.

    The audio is played through the tv, but the picture plays the first still shot of the moment it is connected then says a message saying "we're sorry" then something about the network provider.

    Welcome to the Apple Community.
    Please provide a little more detail, such as what you are trying to do when this occurs and exactly what the message says.

  • I just watched my first movie using Apple TV and Netflix. Apple TV works great except for then I try to switch back over to tv mode I get the cable channel info on the bottom of the screen but no sound or picture. What did I I do wrong?

    I just watched my first movie using Apple TV and Netflix. Apple TV works great except for then I try to switch back over to tv mode I get the cable channel info on the bottom of the screen but no sound or picture. What did I I do wrong?

    It was easy to set up, easy to use, got done watching the movie.  Transferred from HDMI to TV and as my question above notes.  I am on TV, my cable information (show/channel/etc) show OM the banner on the bottom of the screen, I can view the channell guide, but, my screen is white, no picture no sound?  Other than that I got nothin

  • When extending my wifi network using an Extreme as my main and an Express to extend.. does it help to make sure that both devices are on the same channel or does it even make a difference if they are on different channels?

    when extending my wifi network using an Extreme as my main and an Express to extend.. does it help to make sure that both devices are on the same channel or does it even make a difference if they are on different channels?

    Have you even tried the process in which i have described in my previous post?
    Yes, many times.  If you are setup to "extend a wireless network, the screen looks like this:
    If you click the Wireless Options button, the screen looks like this:
    Where is it on this screen that you see a setting to adjust the channel?  It sounds like you are confusing "create a wireless network"....which does allow you to adjust channels.....with "exend a wireless network" which does not.
    Normally, when you extend a wireless network, AirPort Utility used to always assign the same channel to the extending device. That is no longer the case. It might be the same, or it might be different.  You have no control over this, so you have to accept what AirPort Utility thinks is best.

  • Is anyone else having trouble viewing the SEC network via Watch ESPN on a 2nd gen Apple TV?  Software is up to date, but SEC network not showing up as a channel.  Using Xfinity - and it appears on iPhone5 but not on iPad2 - both of which ar

    Is anyone else having trouble viewing the SEC network via Watch ESPN on a 2nd gen Apple TV?  Software is up to date, but SEC network not showing up as a channel.  Using Xfinity - and it appears on iPhone5 but not on iPad2 - both of which are current on IOS. Help!

    the wifi router could also be blocking
    and to really test if the windows firewall is the problem then try turning it off!
    if that scare you too much then disable the internet modem / cable modem or the likes while you test
    always remove more and more factors when troubleshooting sooner or later it will work and you can narrow down which factor did the job and work on that

  • NFL Mobile, Having issue with the video feeds.

    I have a Motorola Android 2 phone. I've had the NFL Mobile app installed on my phone now for close to a year. I pay the $5.00 a month to get all the streaming video's, NFL Red Zone and NFL Network live feeds. I really like the app and use it almost everyday (as it is great for following your favorite team and team related news when your on the go). Anyways I've been having the same issue now for the last 4 to 5 months. When ever I go to watch a video or live NFL Network feed, the video will play and play all the way through, but the image itself is all scrambled....to the point where you can barely make out what is even going on, on the screen. The audio on the other hand is completely fine. It's really clear, no crackling, etc. It's just the video itself that is not coming through clear. Like I said before it doesn't matter what video it is, it could be archive footage or live streaming feeds. The audio works just fine, you can hear everything going on no problem, but the video looks all.... "scrambled"...I guess that would be the best way to describe it.
    If anyone else out there has experienced what I've just explained or knows of a way to fix it I'd love to hear your comments. I would have brought this up sooner but I didn't start experiencing it until after the season was over so it wasn't super important at the time, but with the new season fast approaching, I'd like to get this problem solved asap.
    Just a quick note, I have tried uninstalling the app and reinstalling it, clearing data, etc. I'm all out of ideas. Any help would be greatly appreciated.
    Thanks Mike

         Hey, I'm right there with you. I love the NFL and the app works great with this recent exception. It doesn't get much better than the NFL Red Zone, unless you have the NFL Sunday Ticket. Anyways to answer your 1st question, No I'm not having any problem with any other videos. You Tube works great along with any other video playing apps I have. It's only the videos on my  NFL Mobile app. Like I said they were working fine up until a few months back, then they decided to stop working. The thing I find weird is, the video still plays, and the audio is great, the picture is just fuzzy and scrambled. It reminds me of when I was younger and "if" your parents had cable but didn't have Cinemax, late at night you could flip the channels back and forth really quick hoping in vein to see a breast for a split second....that's what the screen looks like.....(didn't mean to take it there but that is exactly what the screen reminds me of if you actually sit and watch one of these videos, streaming live or archive).
         To answer you second question, I've had the phone for over 3 years so I highly doubt a warranty still exists. Sense I've had my phone for so long I'm way over do for a upgrade which I have several being that I've had my phone for so long. That's not the point though, my phone still works great, I've taken excellent care of it and to top it off the screen still has no scratches. If for some reason I can't resolve this issue getting a new upgraded phone was going to be my next option, but would like to see if I can fix this before going that route.
    One thing I was thinking, may have happened, is maybe there was an update and for some reason it caused what is happening with my phone. Sense this has happened I've looked all over the internet to see if other people are experiencing what I've been dealing with and can't seem to find anyone. It seems like my case is isolated to say the least. I've experienced updates changing or effecting my apps in the past that's the only reason I was thinking maybe it had something to do with that, but that is pure speculation.
    Thanks for your reply and I'll be looking forward to hearing back from you.
    Mike

  • Terrible Pixelation on FX-HD and NFL NETWORK HD

    Anyone else experience extremely poor picture quality with FX-HD and NFL Network HD?  There is massive pixelation and compression artifacting.  Can someone please look into these 2 channels? im also experiencing general pixelation across all channels with my HD service but FX-HD and NFL NETWORK HD are basically unwatchable.  This is prevalent on all HDTVs in my home.

    I apologize for the inconvenience.
    I currently do not see any widespread issues with the channels you have mentioned. Since it's happening on all TVs, there may be an issue with the splitter or anything back to your fiber hub.
    A good thing to check is the signal to noise ratio- this will let you know if the pixelation is being cause by interference in your home. To check in-band SNR, you need to pull up the diagnostics menu. To do this, tune to the channel that is pixelating, turn off the STB and press OK, OK (or select, select on the front) and go into the in-band status menu. Under the frequency of the QAM channel you're currently tuned to will be the SNR value. It should be at least 30db. You may want to watch it a bit to see if it fluxuates. DVR STBs will have two SNR values: one for each tuner.
    If all STBs are showing bad SNR value, possible bad splitter, main feed or ONT coax jack.
    If some bad, some good, then either those local coax legs or the splitter ports.
    If all show good, then it's probably not something in your house.
    Let us know what you find!
    Kevin
    Verizon Telecom
    Fiber Solution Center
    Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

  • Problem with NFL Network Surround Audio

    Hi,
    Except for the first game of the season, NFL Network is not being sent to my Motorola HD QUIP 71001 in Dolly Surround sound. It is connected to my Kenwood receiver via optical cable. All the other channels on FiOS behave correctly, but it seems like for some reason V* is not broadcasting the games in surround. Meanwhile Verizon is broadcasting NFL Red Zone games in surround.
    Is there any compelling reason why Verizon is doing this?
    Solved!
    Go to Solution.

    According to other posts, the NFL Network (HD) is not sending full surround (Dobly 5.1) but only encoding at Dolby 2.0.  AFAIK Verizon only passes on what it is fed from the source network (with the exception of some of the premium HD channels which are supplied in MPEG-4 and have to be transcoded to MPEG-2).
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • I see NFL Network on Fios Mobile on iOS for my ipad but not on Andriod Tablet.

    I thought the apps where the same but I can not find NFL network channel 588 on my Fios Mobile app on Andriod. It is on my iOS for my iPad.

    Hi,
    could you please give us some info on what kind of network you have?
    Can other application communicate with the web?
    Thanks,
    Ignacio

  • Bad Picture Quality On SD Channels With HDMI And Panasonic VIERA 720p LCD HDTV

    I just bought a new Panasonic VIERA 32" 16:9 8ms 720p LCD HDTV TC-L32X1 for my in-laws when they finally had Verizon FIOS brought into their neighborhood last month.
    Install was by the Verizon tech using the HDMI cable I also had shipped to them.
    The HD channels quality is excellent, but the SD quality is smeared -- almost looks like an impressionist painting.
    It is not the TV -- the TV menus are crystal clear, as are the HD channels.
    And, it is not just the broadcast HD -- the DVR box menus are also smeared when viewing as SD channel, as is the guide and the pop up channel info.
    We've tried all the settings on the TV -- Zoom, 4:3, etc.
    The other TV (an older CRT) actually has better SD quality than the Panasonic.
    My research indicates we're not the only ones on FIOS with this problem. Someone suggested using the component hookup rather than HDMI?
    Other say that IMG 1.7 is supposed to solve the problem, that the SD quality was fine before IMG 1.6.
    Any suggestions, solutions, or updates?
    The picture is virtually unwatchable.
    Thank you!

    Here's a particularly relevant post if you don't want to wade through all the above links:
    (http://forums.verizon.com/t5/FiOS-TV-Technical-Assistance/bad-pq-on-std-def-channels/m-p/10917#M5540) -- second to last.
    "Re: bad pq on std.def. channels
    01-06-2009 03:55 PM
    Joe01880 - Being a new customer as of last October, I have never seen anything other than IMG 1.6.  My understanding from other posts is that before IMG 1.6, the SD PQ on an HD box was just fine.  I'm not sure what the complaints/gripes/begs were for IMG 1.6 but it seems to me that, if Verizon knows what changes were made, it should be straightforward to determine which changes caused a deterioration of the PQ.  I think it's been at least 6 months since the first complaints of poor PQ, so I don't really see how anyone can claim that Verizon is in danger of "rushing" an update to address this problem.  I also don't think that a forum topic, no matter how much it complains or gripes, will cause Verizon to rush.  I am much more worried that during a large portion of my 2 year contract that the issue won't be addressed at all, so I'm happy to add my voice to those complaining."

Maybe you are looking for

  • External monitor flicker with ibook G3

    I plugged in an external monitor into my iBook G3. At the highest resolution it flickers/ shakes. Is there anything I can do to resolve this? Thanks, Jacob

  • Problem using weblogic.jspc with wls6.1

              I've got this error using weblogic.jspc on jsp that works fine with the compiler           of 5.1, is this a bug?           java.lang.NullPointerException           at weblogic.management.Admin.getServer(Admin.java:1252)           at weblog

  • Load an external html page

    Hello, I tried to load an external html page inside the ide but not found the method. If I right click on my project name present in the Project Navigator I can choose the 'New' voice that leave me the possibilities to only load template pages. Is th

  • I have moved to another country nd lost my old apps??

    Hi, I have moved to another country. How can I register my new adresse and keep my iphone apps? For now I have changed my adresse and payment information but It seems than I cannot download the app updates I bought at my previous place... Tx, NuDD

  • I am sampling a signal at 1kHz for every 1 second. How do i average the signal for N seconds?

    I am sampling a signal at 1kHz for 1 second. After one second of pause, i sample again for 1 second at 1kHz. If i do this for Nth time, how do i average the signal over the 1 second period?