Nfor table ZPP cannot be generated, error while transport

Hi All
I have made a change to ZTABLE ( essentially added another field which is not key field ).
i have checked that all are active.
technical settings are complete too.
now when i adjust in se14 it shows me no error.
but when i transport to Quality i get the eroor
E-nametab for table ZPP_MATERIAL cannot be generated.
hence it does not refelcet in another server...
what shal i do?

check the transport request is transported properly are not if yes transport again.
and there is a possibulity of copying the dataelement in other request.
check with all the requests by checking these two you will definatly solve your problem.
regards,
venkat.

Similar Messages

Table could not be activated - Error while transport

Hi all,
I've created a table in one server under a transport request. Co-file and data-file are download for the same and imported into another system (development server). Import is successful and working fine. But, while transporting the table to quality server following error is coming even table is activated.
Table TABNAME could not be activated (E- Nametab for table TABNAME cannot be generated )
Kindly let me know what might be the problem.
Thanks in Advance.

Hi Siva,
First check Transport request for extended check and consistency check. You will get errors. If there is no errors then goto se14
database utility and give the table name and click edit and select the adjust database table . Your problem will be solved.
Let me know if you have any further errors while doing this.
thank you
srinivas

Buffer Table not up to date error while accessing Catalogs

Hello,
I am getting Buffer table not up-to-date error while accessing ARIBA Procurement Catalogs.
Initially, my Test system was pointing to Production Catalogs but now, when I changed the settings in "Define External Web Services" and pointed it to DEV Catalogs, it is failing with error: "Buffer Table not up-to-Date"
Refreshed the Buffer already but still error not fixed.
We already have the similar settings in other systems and there the connections are working fine
Please advise
Regards
Manish Agrawal

Hi Manish,
Could you please check the below notes and implement the same since I had the same issue upon punching out from the catalog to SRM system.
2041631 - Simplified Shopping Cart:Dump on Check Out From Catalog
2086844 - Dump "Buffer table not up-to-date" on Check Out from Catalog
In addition to the above, please maintain the portal information in the path as shown in the below screen shot
Kindly check and let me know on how it goes.
Best Regards,
Bharathi

Error while transporting structure

Hi
I have tried to move a structure CI_FAGLFLEX04 from development to quality. But I am getting a transport error as follows..
Table CI_FAGLFLEX04 could not be activated
(E- Nametab for table CI_FAGLFLEX04 cannot be generated )
This structure is used as an include structure in FAGLFLEXB. Can anyone tell me what might be the problem.
Regards
Sathar

Hi,
check whether FAGLFLEXB is there in quality or not?
In our system it is not there.
Rhea.
Edited by: rhea on Sep 29, 2008 12:56 PM

Error while transporting a Workbook

Hi Pioneers
I got an Error while transporting a Workbook from Development to quality.The error is "logical transport object 432L not found in table RSTLOGOPROP".
Could u let me out with a possible solution....Plz...
BR
Sekhar.D.R

Hi,
You have to create a new request and transport it again before transporting ensure that you collect all the dependent objects manually in the "Transport Connection" in the collection options.
Hope this helps
Assign points if useful
Regards,
venkat

Error while transporting custom datasource

Hi All,
Below is the scenario that was carried out in my project.
1. Created OHD to load data from a CUBE to Data base Table /BIC/ABC.
2. Created a custom Datasource ZABC_TEST with the above table.
3. Activated the DataSource and loaded the data. (Data load successfull. It works fine).
4. Tried transporting the above. But trows error while transporting the data source.
Error -- InfoSource ZABC_TEST is not available in source system BITST.
Let me know what can be done to solve the above error. Please suggest if i have missed out something.
Thanks in advance.
Maddy

HI,
The problem seems to be occuring since you are transporting both OHD and DS in the same TR request.
Transport first the DS in a request, then in another request transport the OHD.
This should resolve the issue.
hope this helps.
thanks,
rahul

Error while transporting the TR to production

Dear experts,
I am facing the issue of TR error while transporting it to PRD. I have already checked, the table is active both on DEV & on QUI. What should I do to transport this without any error? Thanks in advance.(Please find attached screenshot.)

Hi,
this looks like you forgot a transport request or have transported in the wrong order.
Check that the table ZPLANTS is active (or has been activated with this transport request in step IMPORT).before the generation starts. Please check also the complete IMPORT protocol.
Regards,
Klaus

Error while transporting objects:Internal error during pvc call: Parameter

Dear all,
We are facing the following error while transporting the individual configuration objects from our PI development system.
Export failed: Internal error during pvc call: Parameter versionSpecifier or version has the invalid value null .
However, it works fine when the complete configuration scenario is transported.
We tried to transport the objects with different user id's, even then the issue still exists.
Any inputs to resolve this will be highly helpful.
Thank you,
Younus

Hi Mohammed,
Answer is inside this oss [Note 1554387 - Error during export from Integration Directory|https://service.sap.com/sap/support/notes/1554387]. In this oss note, solution is to apply a patch (just a patch, not a SP). as it's a litle sap bug...
Note: your issue is also explained with picture in this one "1550549 - PI transport: Internal error during pvc call" (sorry for this one I cannot insert a link)
regards
Mickael
Edited by: Mickael Huchet on Jan 26, 2012 2:50 PM

Error while transporting Openhub (BI7)

Hi Gurus,
I am getting an error while transporting the open hub. In the dev system it worked perfectly but when i transport it to quality, it is showing the following error.
"Unable to activate table /BIC/OHZxxxxxx ."
When i checked the table in quality it says that /BIC?OHZxxxxx-0UNIT ( Reference field ) does not exists. But 0UNIT is there in the DSO on which i developed the openhub and the infoobject 0unit is also active in quality system.
Why this error is happening?
Regards,
Raghavendra.

Hi Raghavendra,
There are chances of missing some objects in transport request wile assigning objects to request...please check the objects list and open hub structure.
and also plsease check the 0Unit field status in Quality system.if it is in modified status means make it it active ststus.
Please create one more transport request and validate the tr objects...
Best Regards,
maruthi

Error while transporting Infocube

Hello all,
i am getting following error while transporting infocube to testing system.
Please see the bellow error message details.
Error/warning in dict. activator, detailed log > Detail
Structure change at field level (convert table /BIC/DZMD_Y_MR2)
Structure change at field level (convert table /BIC/FZMD_Y_MR)
Table /BIC/DZMD_Y_MR2 could not be activated
Table /BIC/FZMD_Y_MR could not be activated
Return code..............: 8
Following tables must be converted
ZMD_Y_MR InfoCube could not be activated
Thanks in advance.
BR,
YVReddy

Dear Venkat,
Looks like you have changed the fields on the infocube.Just wanted to make sure that did u delete the 'data' from the cube 'ZMD_Y_MR' in the testing system before u make the traansport?
for any changes in the cube fields (except addition of new char) u may need to delete the cube data..
regards,
Srini

Error while transporting 0MAT_PLANT

Hi Experts
I am getting error while transporting 0MAT-PLANT to Prod System.It going fine to QA system.
it is giving the follwoing error with return code 8
Characteristic 0MAT_PLANT: Master data has to be activated before conversion
Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for DTPA L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
BW-WHM (Warehouse Management)
I have deleted one Info-object (Key figure) and added one info-object(Key figure) to 0MAT_PLANT ,transported still it is giving errors it is going fine to QA.
1.Is it because we have large no of records in Prod system ..??
2.Do we need to delete the data in Prod for 0MAT_PLANT and transport....????
3.Is it related to any database error in adjusting P table in Prod...?
Please let me know anybody faced this kind of problem.
Regards
Prasad

Hi Prasad,
Just to summarise the discussion. If you need to send the transport successfully you need to the following steps:
1. MD (complete) needs to be deleted from IOBJ. Please note, unless you delete the TD data involving the IOBJ, you will not be able to delete MD completely.
The reason being, the SID's for the MD are being used in the various IC/DSOs. So you need to go by deleting related TD and then MD.
2. Secondly, if you forcibly delete for 'P' and 'S' table using the SE14-> Table Name -> Delete Data & adjust Db. This will cause lot of inconsistencies on Drill Down in reports and even on execution as SID values are missing!
Moreover, as you said there are around 10/12 InfoProviders involved here, then this forcefull deletion can cause a real imapct to your Prod system and make many reports unsusable! So pls be careful!
Please decide accordingly as there is a trade off here!
-VA
Edited by: Vishwa Anand on Sep 27, 2010 12:15 PM

Error while Transporting Update Rules.

hi xperts,
   I am getting Error while Transporting the Update rules,i already transported the INFOCUBE,INFOPACKAGE EVERYTHING.
    Start of the after-import method for object type R3TR ROUT (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
The errors affect the following components:
    BW-WHM (Warehouse Management)
Is the error,I didn't change any thing in the Cube or changes to Update rules.
Can anybody Help me?.
   thanking you,
                               with regards,
                               Narendra.

Hi,
Are you still facuing the issue ?
No need to worry about the routines, once you save the update rules if there is any routines in it it will be saved in the same request. If you want to check the routines you can check in the transport connections. Transfer the update rule to the right hand side of the screen and you can see all the routines that belong to the UR.
If you know the technical names of the routines you can check in the TADIR table.
Have you transported the info-sources for this update rules ? why not you again capture the info-source and the update rule in a single request and transport again.
Hope it helps.
Thanks,
Soumya

Error while transporting Queries

Hi,
I am getting this error while transporting queries!!
Object '!ZTIC_UKA' (ELEM) of type 'Query' is not available in version 'A'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name '!ZTIC_UKA' (in transport request ELEM) of type 'Query' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System Response
The object was not taken into account in the next stage of processing
Thanks

Hi Murali,
YOu are trying to transport the element ZTIC_UKA' of the query,may be an variable which is not colelcted in the request.
Try to transport the query through RSA1> Transport connection->Query-->give you query name -->Drag and Drop to Right hand side and Click on collect all dependent objects and check whetehr they have collected in the same request.Make sure ur variables are collected.
Tranport it now and Check.
Rgds
SVU123
Edited by: svu123 on Mar 4, 2010 7:41 AM

Error while transporting database index into quality system

Hello,
I am getting an error while transporting a new index in quality system.
I have created a new index for table VBFA in TRD and activity the object without errors. I even adjusted the database table using database utility.
While transporting the request there was a strange error "R3TRTABLVBFA was repaired in this system".
I retransported the objects using a new request. However I still got the same error.
Please help.

Navin,
No idea about the error you have mentioned but check the SAP Notes 185530 and see if you can avoid creating an index.In this Notes it is clearly mentioned on how to use VBFA table without any performance issues.
K.Kiran.

Error while transporting Transformation: Syntax error in Start Routine

Hi Everyone,
I'm facing a strange problem during transporting one of the Business Content cubes from Dev. to Quality.
I'd activated the DSO 'Purchase Order Items (0PUR_O01)' and its entire data flow from the 4 datasources 2LIS_02_CGR, 2LIS_02_SCN, 2LIS_02_SGR, and 2LIS_02_ITM from BC. Then I migrated the Transfer/Update rules to transformations and the DataSources to BI7 DataSource. So far so good. The migration was successful and all the objects were activated.
Now when I transport the same to Quality, the import fails with return code 8 and the error message says:
'Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)'
'Start Routine: Syntax error in routine'
I verified that the transformation where the error orrured was the one from InfoSource Z2LIS_02_ITM to DSO 0PUR_O01. I went and checked the start routine and it did indeed have a syntax error:
'In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter SOURCE_PACKAGE" is incompatible with the formal parameter DATA_PACKAGE". '
But when I check in the Dev. system, there is no syntax error for the same routine. Later, I tried to transport only the said transformation by re-activating it in Dev, and again I got the same error.
I have no idea why I'm getting a syntax error in the start routine when there are non in the Dev. system. Also none of the coding is customised, it was only the BC code, migrated to a transformation.
Any suggestions on the steps I could take to transport the transformation to my quality system?
Thanks,
Ram

Hi Ajay, Shanthi, svu and Ray
I do indeed have a start routine in my transformation and it was migrated from a 3.x update rule to a BI 7 transformation routine.
The migration was successful and the Start Routine has NO syntax errors in the start routine in the Dev. system. I only encounter the error while transporting it to the Quality system. I cannot modify the code in the Quality system because it is non-changelable and there is no point in trying to change the code in Dev. because there are no errors over there.
I've also made sure that I've transported all the necessary objects required by the transformations to quality. The routine does not perform a lookup, it simply deletes some records from the data package based on the processkey value (which is itself present in the data package).

Nfor table ZPP cannot be generated, error while transport

Similar Messages

Maybe you are looking for