Nforce 4 ultra k8n neo4 platinum need info

hi people. i need some help
im about to purchase a new mobo with nforce 4 ultra and i like msi k8n neo4 platinum (nforce 4 ultra + dual lan gigabit, 8 sata ports (4 nvidia) etc. i didn't whant sli by now so...
1° do you recommend this mobo?
2° i see lots of bios upgrade in the support page of this mobo, if there something i didn't like is to flash a bios several times, so i must upgrade bios at once with the latest or i must do it one by one?
3° am2 or 939?
4° there some bios or something upgrade to support raid 5?
5° y want to build this:
amd athlon 64 3000+
nforce 4 ultra msi k8n neo 4
1 gb ddr memory (kingston
msi nx7900gt256e or msi nx7600gt256e (depending of my pocket)
did you like it
ok
im actually have
duron 1600 applebred
768mb ddr 400 pc3200 memory
mobo nforce 2 ultra 400 msik7n2delta ilsr
msi geforce fx5700vtd128
thanks guys you are allways helpfull
bye

ivangelion, I have this board and it's a good choice.
So to answer your questions:
1. yes
2. No you can upgrade to newest right away [ver1.D]
3. 939. Most people/ forums are saying to wait awhile on the AM2
4. The Silicone Image RAID supports RAID 5 as it is now on this board.
5. That's a good starting point and you can amp it up from there as $$$ permits.
Good Luck and let us know if you need help along the way.

Similar Messages

Memory Controller not available - K8N NEO4 Platinum Ultra

Hi Experts!
I have typical problem in my PC. I need reply only from experts. Newbies please excuse.
My system displays the following info in POST.
VENDOR / DEVICE CLASS DESCRIPTION IRQ
===================================
10DE 005E 0580 Memory Controller NA
If anyone can correctly PIN POINTEDLY identify why this is displayed, it will be much helpful
As such I face no difficulty with my system. But this message very much annoys me.
Thanks.
My PSU Details:
400W. +12V 20Ampere. (This is the maximum I could afford in our indian PC environment.)
AMD 3000+ Winchester 90nm. CPU.
K8N NEO4 Platinum Ultra Mother Board.
512 MB Hynix PC3200 Memory. (2*256)
80GB Western Digital.
Ordinary PCI VGA 2mb card.
Samsung CDROM.

There is no driver for memory controller with A64 (nforce3/4) as stated earlier .
You see this in the memctrl.inf for UDP 5.10 , driver pack for nforce 3 and backwards down to nforce 1 .
Memctrl is only added to the 5.10 package for backward support to nf2 and lower as this is a unified driver package and
the memory controller is at chipset level on the motherboard that resides in the external northbridge on nf2 chipsets and lower .
What you see is just a vendor/machine id description and is just as it should be .
Code: [Select]
; nvmemctl.INF
; Copyright (c) 2001-2002, NVIDIA
; Version 1.00
[Version]
Signature="$WINDOWS NT$"
Class=System
ClassGuid={4D36E97D-E325-11CE-BFC1-08002BE10318}
Provider=%NVIDIA%
CatalogFile=nvmemctl.cat
DriverVer = 04/27/2004, 4.4.0
[ControlFlags]
ExcludeFromSelect=*
[Manufacturer]
%NVIDIA_MFG%=NVIDIA_SYS
[SourceDisksFiles]
[NVIDIA_SYS]
%PCI\VEN_10DE&DEV_01AA.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01AA
%PCI\VEN_10DE&DEV_01AB.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01AB
%PCI\VEN_10DE&DEV_01AC.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01AC
%PCI\VEN_10DE&DEV_01AD.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01AD
%PCI\VEN_10DE&DEV_01EA.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01EA
%PCI\VEN_10DE&DEV_01EA&REV_C1.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01EA&REV_C1
%PCI\VEN_10DE&DEV_01EB.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01EB
%PCI\VEN_10DE&DEV_01EB&REV_C1.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01EB&REV_C1
%PCI\VEN_10DE&DEV_01EB.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01EC
%PCI\VEN_10DE&DEV_01ED.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01ED
%PCI\VEN_10DE&DEV_01EE.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01EE
%PCI\VEN_10DE&DEV_01EF.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01EF
; Do-nothing section used to avoid "Unknown hardware" installation prompts.
[NO_DRV]
Include=machine.inf
Needs=NO_DRV
[NO_DRV.Services]
Include=machine.inf
Needs=NO_DRV.Services
[NO_DRV.HW]
Include=machine.inf
Needs=NO_DRV.HW
[Strings]
SystemClassName = "System devices"
NVIDIA = "NVIDIA"
NVIDIA_MFG = "NVIDIA"
PCI\VEN_10DE&DEV_01AA.DeviceDesc="NVIDIA nForce 220/230 Memory Controller (DDR)"
PCI\VEN_10DE&DEV_01AB.DeviceDesc="NVIDIA nForce 415/420/430 Memory Controller (DDR)"
PCI\VEN_10DE&DEV_01AC.DeviceDesc="NVIDIA nForce 220/230/415/420/430 Memory Controller"
PCI\VEN_10DE&DEV_01AD.DeviceDesc="NVIDIA nForce 220/230/415/420/430 Memory Controller"
PCI\VEN_10DE&DEV_01EA.DeviceDesc="NVIDIA nForce2 Memory Controller"
PCI\VEN_10DE&DEV_01EA&REV_C1.DeviceDesc="NVIDIA nForce2 400 Memory Controller"
PCI\VEN_10DE&DEV_01EB.DeviceDesc="NVIDIA nForce2 Memory Controller"
PCI\VEN_10DE&DEV_01EB&REV_C1.DeviceDesc="NVIDIA nForce2 Ultra 400 Memory Controller"
PCI\VEN_10DE&DEV_01EC.DeviceDesc="NVIDIA nForce2 Memory Controller"
PCI\VEN_10DE&DEV_01ED.DeviceDesc="NVIDIA nForce2 Memory Controller"
PCI\VEN_10DE&DEV_01EE.DeviceDesc="NVIDIA nForce2 Memory Controller"
PCI\VEN_10DE&DEV_01EF.DeviceDesc="NVIDIA nForce2 Memory Controller"

MSI K8N Neo4 Platinum SLI sound needs -5V; newest Antec 550W has no -5V rail

I came within a whisker of ordering a non-returnable 3700 Venice, MSI K8N Neo4 Platinum SLI mobo and an upgraded Power Supply, Antec's newest 550W PS the TP2-550 EPS12V ($117). This has dual 2x24pin 12V 19A rails and is touted as the new V2.0 EPS12V/ATX12v compatible power supply for high performance SLI systems. By accident I came across a page at MSI for this mobo
http://www.msi.com.tw/program/products/mai...ail.php?UID=641
At the end is this warning: MSI Reminds You...
• For this model, you must use a Power Supply which has a -5V pin supply. Also, the users manual which I downloaded on Pg 2-10 says the same thing
The above Antec PS specs do not show a -5V rail, nor does an Enermax 600W I looked at. The V2.0 specs for ATX12v which added 2x24pin 12V rails dropped -5V rail from the spec and it appears MSI is not conforming to the spec (See Antec response at end) None of the web sites selling these PS & mobos contain any warning. I vaguely recall from a forum a while back it may have something to do with the Soundblaster system in the mobo.
http://www.antec.com/us/productDetails.php?ProdID=22551 (click specifications)
Isn't this a major showstopper which is going to cause a lot of grief for those of us upgrading to SLI systems using this mobo and upgrading our PS to the newest & best power design? We won't know the PS won't work until we build the system.
Regards, Ron
Antec reply to me:
>>>>Thanks for the link. Since MSI's website does state the motherboard needs the -5v, the True550EPS12V will not work with this motherboard. The Standard (http://enhanceusa.com/documents/atx12v_v2.01.pdf) has removed the use for the -5v rail and it is no longer needed. MSI has not manufactured that motherboard to the Standard. Finding an ATX12V v2.0 power supply with the -5v might be hard to find. You should contact MSI for a compatibility list of power supplys that were tested to work with the K8N SLI Platinum.

Quote from: ccve3 on 21-May-05, 07:27:40
Wow!! syar2003 thanks for that post. I've spend an hour going through it & fasteddies links. Now I are a power expert. The dual rail argument is enough for me to go back to the MSI K8N Neo4 Platinum SLI with one of the single rail PS -5V units listed by fasteddie. The only question left now refers to computerpro3 recommendation on ultra power supplies for SLI
>>I quite simply wouldn't dream of putting anything else in my machine. Keep in mind, this section is for 2x 6800 models, not the 6600's which most any good psu will handle (like Antec Neopower, ocz 520, etc). . Pc Power and Cooling 510 Deluxe SLI edition (refer to list)
2. Zippy/Emacs 550-700w models
3. OCZ 600w (personally I would get the pcp&c for the price, but it's been proven here, so I'll be fair...).
These are really high end, expensive and only 3-4 choices. Since I'm getting one 6800GT and eventually another & possibly eventually a 4800 X2, I was hoping the OCZ 520W would do it but computerpro3 says Powermaster 520 isn't good enough for SLI. I found that there is an OCZ 600W ATX12 dual rail which surprisingly has a -5V rail needed for K8N Neo4 SLI Soundblaster. Will this meet computerpro3's preference for a high end PS for SLI systems even though I'm losing the 1 rail advantage. Maybe the 600 Watts just overwhelms the 1 rail/2 rail question.
Thanks again for the teriffic help
Regards, Ron
Wondering what you settled on. I got the Antec TP550 and it's flawless on the board. I even have the older 20pin model which works perfectly (including sound). If you really wanted what I would consider to be a top dog (pcpower and cooling), and find the -5v rail missing, all you have to do is place a phone order and request they add a -5v rail. It's a minimal cost and a total solution for having everything. Just my $0.02

K8N Neo4 Platinum Socket 939 NVIDIA nForce4 Ultra

ok i just got a new mb and processor and psu .
amd 64 3500+
psu = 520w 12v-36a
mb = K8N Neo4 Platinum Socket 939 NVIDIA nForce4 Ultra
all i did was excgange this mb and psu and cpu with my old ones. and i installed everything fine but when i turn on the comp i get no display like i have no video card....ive dbl checked everythhing and put in 2 otehr video cards and still no display...im not shure if i need 2 uninstall my old bios? if thats possable i have no clue or uninstall anything b4 i made this switch can you please help me out thanks alot.

k did that .. ok this thing is getting 2 me lol it gives me prossesor error 4 red lights then i turn off does sdame thing mess around with it turn power supply off completely for more than 10 sec then back on and it boots up giving me yet anothyer error like 1 and 4 yellow 2 and 3 red or other way around and i turn it off turn it back ona nd leds are still teh same arnt they supposed 2 reset? then i turn off my psu for more than 10 sec back on and its reset...i dunno what this means is it the battery on the mobo? prolly not i have no clue @ this point and ive tried diff keyboards.

Audigy2 + MSI K8N Neo4 Platinum nForce4 Ultra prob

Hi I have an audigy2 from my old pc and installed it on my new system the motherboard is a MSI K8N Neo4 Platinum nForce4 Ultra after I installed it I began getting 'Machine_check_exception' blue screen of death, I used the creative auto update to update to the latest drivers, now the pc makes a hissing sound and reboots it's self.
Any help would be apprecieated.

hi
i am getting th same thing with my gigabyte nforce 4 board
ga8nxp-sli
could this be an nforce 4 related issue?
i found through a process of elimination that the conflict apears to be with windows audio service
i turn it off and all the problems just go away but i still get no sound (not much help there i am afraid)
regards
andy

K8N Neo4 Platinum nForce4 Ultra and 4 GB SDRAM DDR 400 Problem

I have the K8N Neo4 Platinum nForce4 Ultra and 4 1GB sticks of Corsair ValueSelect DDR 400 (PC 3200), model VS1GB400C3, filling all four slots. The BIOS recognizes about 2.88 GB of total memory. The MSI manual states:
Quote
Due to the South Bridge resource deployment, the system density
will only be detected up to 3+GB (not full 4GB) when each
DIMM is installed with an 1GB memory module.
I'm not sure what this means. Does it mean that I'm "wasting" my SDRAM, that not all of it is used, or does it mean that all of it will be used and the BIOS just reports a smaller number?

Hi.
You seems not familiar with X86....
As you should know, Windows XP and most OS are 32 bits. That mean that every memory pointer is 32 bits, thus allowing to address 4Gb of memory.
BUT
In most OS, there is a difference between the kernel and the user. So, in most OS, the memory is divided in two 2Gb block (no matter how many Gb of Ram you really have!). The first one is for the OS, the 2nd for the user program.
So, If you have for example 3Gb of ram, in the best case, you have 1gb for system and 2Gb for user program.
To allow more Ram to fonction, PAE (Physical Address Extension) was made. Instead of 32, you got 36 bits for you pointers.
But as X86-32 CPUs can't handle more than 32 bits, a reserved area was made within 4Gb to allow Memory to be copied from the area the program want to read.
Exemple:
You got a server with 8Gb of ram. In windows, you only see 3.5+512Mb PAE.
If a program need to address memory in the 7-7.5 Range for example, the chipset copy the data from the 7-7.5 range to the 3.5-4 range in order to allow the CPU to get access: that's VERY slow.
So, in short: You can't have and don't need 4Gb of ram on 32bits OS.
(And there's even more place occupied by every card (AGP, PCI, PCI-e)....)
That's why XP64 is so interresting for programmers who needs lots of ram (Database....). When used with a chipset who know how to deal with lots of ram (I don't know if NForce4 can do it but I doubt it), you can load in memory a 4Gb Database.
But In all case, the bios should say 3.5Gb, not 2 and so on. You must have a problem with one of your stick. My guess is that they are all double sided and that you should slow down the memory to 333MHz.
(Or better: Send back 2x1Gb stick and get 2x512 SINGLE SIDED stick, unless you REALLY NEED 1.5Gb for your system !)

MicroStar K8N Neo4 Platinum 54G - nForce4 Ultra Avilability in CZ

Hi all,
does anybody know when M/B MicroStar K8N Neo4 Platinum 54G - nForce4 Ultra will be avilable in Czech Republic (Europe)??? I'm waiting two months for it...

Not really (maybe AC97 Controller = Auto was the closest). But, I tried now to switch the LAN cable to the upper RJ-45 slot instead of the lower one, and it seem to have stopped the power on peculiarity. Now only if I could pinpoint what's the broken component that causes the boot screen freeze and what causes the 35-45s idle time at the Win-logo loading screen.
The freaky boot screen freeze happens something like this:
1. the mother board model number is shown
2. the CPU information is shown (or sometimes this is skipped and not shown)
3. here it may or may not freeze and usually it produces this terrible out of sync mess (and monitor has to be switched off to get it back to normal)
I don't see any connection to overheating, I never touched any overclocking settings (or any other settings for that matter, it's a 2-day old installation).

K8N Neo4 Platinum Ultra nForce4 no post.

Took the cpu off and cleaned it, upgraded the video card started the computer and no post. Led's 1,3,4, green 2 red. Took cpu out and checked it no bent pins, checked all connections. Sometimes when it boots it will have 4 green led's but no video. Tried another vid card same thing. Tried booting and holding the insert, cont+home, F1, delete keys. Get power to the fans and hear the HDD sometimes.
Specs.
MSI K8N Neo4 Platinum Ultra nForce4 bios v1.6
Athlon 64 3700+ San Diego Core
Geil value ram
1-36GB Raptor
, M45 Powercolor Radeon X800 GT PCI-EX 256MB DDR3 R480 Core
XP.Pro.W/SP.2
X-Connect 500W ATX PSU
+5V +3.3V +12V -12V -5 +5VSB
30A 28A 34A .8 .3 2
Edit: Have cleared the cmos many times. If I boot holding the insert key down for a while I get 1,3,4, leds red 2 green, if I then push F1 they all turn green but still no vid.

No posts to your post either LOL
Anyway - could be fans causing it - I had my Neo not booting until I disconnected a case fan from the mobo fan header output.
Try with just leaving the cpu fan (could also be this one of course) .

K8N NEO4 Platinum Ultra - Over clocking guidance required.

Hi Every one!
Can any body help by explaining or providing a link to a guide which helps to over clock TO ITS BEST SPEED for the MSI K8n Neo4 Platinum Ultra board with the following configuration?
AMD 3000+ Winchester Socket 939.
DDR RAM PC3200 400 Mhz Hynix 2 x 256 = 512 MB
Ordinary PCI Vga Display Card.
SATA 80GB WD HDD.
MB : K8N NEO4 PLATINUM ULTRA.
PSU : +12v RAIL = 20AMPS.

You may aswell start Here

BSOD's on my x64 K8N Neo4 Platinum based PC, Any ideas what's wrong? Help!

Over the past few month I've been getting BSOD's. There is no real pattern to their occurence and it's not something which is constantly happening (It happened around 5 times in the past 2 months), but I've really grown to hate them. You see, after getting one what has happened in the past is that when I go to restart my pc after getting a BSOD, I find I need to re-install my whole OS! What happens is that after booting (which oddly enough doesn't work well after a BSOD, It freezes on the boot screen and I need to restart several times), a black screen appears telling me that certain files in the C:Windows\ direcotory are corrupt or missing.
So the real problem is that the BSOD's cause me to re-install my whole OS. One will happen, then it will be ok, I turn the system on, log into windows, then it might happen again, after which I'll need to re-install. The files that go missing are always different too, and when I run scan-disk (after plugging in my main drive into another computer) it finds corrupt files and deletes them.
At first I thought it was Azureus (p2p client) which was causing the problems because it seemed to happen when I was runing that. I stopped using it, and the BSOD's still occured...sometimes randomly when browsing...etc. I figured that since files got deleted and corrpupted, it must be a problem withthe Hard Drive....So I bought a new one, and I've still had the BSOD error (although files haven't been deleted yet).
So yeah, I really need to solve this problem as it is taking away from my productivity and causing me to re-install far too often. I will post the BSOD info as well as my system info below (and a screen shot):
Quote
MACHINE_CHECK_EXCEPTION
*** STOP: 0x0000009c (0x0000000000000004,0xFFFFF80000113BC0, 0x00000000B2000000, 0x0000000000070F0F)
I looked that up on the net, and it seems the first part seems to indicate, or at least COULD indicate overheating. I checked CPU and System temps and they seem acceptable.
I am running Windows XP x64 Edition with the following hardware (please note that all of the hardware drivers I'm using are written for x64, MSI is so good:)). I have had this PC before it started having these problems, it could be related to using x64 I guess, but the error doesn't show that does it?
Quote
AMD Athlon 64 3200+ 2.0 GHz Socket 939 (Venice Core) w/ stock heatsink/fan
MSI K8N Neo4 Platinum S-939 nForce4 Ultra
OCZ PC-3200 DDR400 Premier Series 1GB (2x512MB) Dual Channel Kit CAS 2.5
Ati Radeon x800xl 256MB gddr3, PCI-E
LG 17" L1720B LCD monitor 16ms, 1280x1024
Western Digital Caviar 120GB SATA
Western Digital Caviar SATA II (WD1600JS) 160GB 7200RPM 8MB Buffer
Western Digital Caviar SATA II (WD2500KS) 250GB 7200RPM 16MB Buffer
Pioneer DVR-109 DVD-RW
Pioneer DVR-110D DVD-RW
Antec Sonata II Mid tower ATX black power supply 450 Watt ( ATX12V 2.01 )
Creative I-Trigue 2.1 L3450 speakers
Sony 1.44MB Floppy Disk Drive
Microsoft multimedia keyboard and Microsoft optical mouse (PS/2)
My OS and drivers are fully updated. As for my BIOS I've been running the version I'm using now forquite some time and I believe it is version 1.5. Also in another bad turn of events, my northbridge fan seems to be on its way out of this world (this just happned so I don't think its related to the BSOD). I haven't been able to find a replacement, and since its not spinning very fast, and sometimes stops...It's causing the heatsink to get quite hot. I need to get a new one, and I can't find them anywhere...I wonder if thats covered under warranty... I looked into getting a different heatsink, but my Graphics card is so colse to this heatsink, that theres no room for a bigger one at all.
Do you think this problem is motherboard related, I cannot understand what the technical info the BSOD gives me means, can anybody understand it? I don't think its my HD's, or Ram, or CPU...could it be a motherboard problem? And if so, its under 1 year old, can I get an RMA?
Thanks for the help in advance.

At one time I had a weak 450w psu that had only 18a on the 12v rail. When I overclocked my cpu and gpu, I was getting bsod's every once in a while and couldnt figure it out until I read a similar post like yours on this forum. I decided to upgrade my psu and havent had that problem since.
Power supplies can be deceiving. I now have a 480w psu but its has 30a on the 12v rail. So what we need to know is the ratings of your psu (see my sig) just to see if your psu is the culprit. Just my 2 cents.

New build: MSI K8N Neo4 Platinum + maxtor 300gb = problem?

Got these 2 products included in a order:
MSI K8N Neo4 Platinum nForce4 Ultra (Socket 939)
Maxtor DiamondMax Plus 10 NCQ 300GB
While checking up on the MB on the MSI site, I noticed a version of the bios (1.2) that says 'support for 300gb maxtor drives'
That's the same HD one I have coming with my order >.<
If the MB I get hasn't got that version of the bios already installed will I have trouble installing the drive?!
I downloaded the bios and it says in the readme not to install it from a floppy disk, so I guess you need a system up and running to make that update in the 1st place. No Idea how to go about this, if the need arises.

Quote from: Supershanks on 19-May-05, 21:45:00
Hi drjugears,
Welcome to the forum.
Many people are runnimg ok anyway as dope says.
But it's not an issue you can update the bios via floppy b4 connecting the maxtor.
See Flashing the BIOS for Users using NON FAT file system This is a guide written by msi. Strictly speaking if you folow the instructions you aren't flashing from a floppy the actual update is done on a virtual drive in memory.
if you need a floppy boot disc see Why no floppy for bios flash?
luck with build
Thanks very much for the welcome and info.
Unfortunately I'll have to wait a while to see...I installed everything....but need some adapter for the 6pin connecter on the ATI card. The power supply came with some 8 pin one. So I need a 4 to 6 pin adapter. Doubt If I'll find one local, so will probably have to wait until monday now to try it out.

IDE cables bundled with K8N Neo4 Platinum--80 wire or 40 wire?

Is the rounded IDE cable that comes with the K8N Neo4 Platinum (non-SLI) mobo an 80 wire or 40 wire cable? How can one tell?
I think I may be having some UDMA issues with my second hard drive (120GB Barracuda 7200.7 IDE). I installed XP on my SATA drive with no other drives connected and then added this IDE drive.
The rest of my setup is in my sig.
Thanks!
Bruce

OK. I checked my device manager for the info on my IDE drive. I looked at the properties of NVIDIA nForce4 Parallel ATA Controller.
Primary Channel:
HD Model # is ST3120026A. The drive set up as Ultra DMA 5 - Ultra 100. Checked boxes are "Let BIOS select transfer mode, Enable read caching, and Enable write caching. I did a speed test from Windows and it shows Theoretical limit of 100, Burst speed of 86.3 and Sustained speed of 58.1.
Secondary Channel:
DVD: _NEC DVD_RW ND-3540A. Transfer mode is Ultra DMA2 - Ultra 33. This is using a flat ribbon cable from an older computer. The only box checked is "Let BIOS select transfer mode".
Do these both look OK or do I need to change something?
Then I looked at the properties of NVIDIA nForce4 ADMA Controller and found:
My SATA drive (my boot drive) is HD model # ST3160812AS. Transfer mode is PIO Mode. Boxes checked are "Enable read caching, Enable write caching, and Enable command queuing. There is a yellow triangle that says "Transfer mode downgraded". I can't do a speed test.
What do I need to do to operate in Serial ATA Generation 2 - 3G? This is how this drive is supposed to operate.
Thanks!
Bruce

K8N Neo4 Platinum random lock-ups and BSOD

I built a new PC about 3 months ago and from day 1 it has always locked up / frozen at random intervals. Sometimes it also BSOD's with a Machine Check Exception. Seems to lock up / freeze more often when have multifple windows open eg. Multiple IE running but really is random. I have replaced the Mobo and Ram but keep having the same issues. Have tried a clean install but no luck either. Did a clean install on an old IDE HDD and seemed fine but it did not have all of the software that I run on the SATA drive. Thinking the SATA drive may be the issue? Please Help!!!
System is as follows:
MSI K8N Neo4 Platinum [Bios 1.D]
AMD Athlon 64 X2 3800+ DC [AMD Drivers]
2 x Kingston 1024Mb ram [Dual Channel]
Nvidia 6800 Ultra [Latest Drivers 91.31]
Thermaltake Purepower 460W PSU +3.3V 30A, +5V 30A +12V 15A
Western Digital 200G SATA II HDD [SATA Port 5 i think]
1 x LG DVD +-R/RW [IDE Master] IDE port closest to edge of Mobo
1 x LG CDR/RW [IDE Slave]
MS XP Home SP2

Quote from: davePC on 09-August-06, 09:06:44
Did a clean install on an old IDE HDD and seemed fine but it did not have all of the software that I run on the SATA drive. Thinking the SATA drive may be the issue? Please Help!!!
Seemed fine?
There isn't really be any difference between an IDE drive and a sata.
Except that the sata drive needs some drivers as your installing the os.
Check your ram timings in bios but likely it's your psu.
Which components are on which rail?
The ones that use the +12v are your cpu,cdrom,dvdrom and graphics card.
Try disconnecting both roms and see if it improves things?

XP64bit installation halts, K8N Neo4 Platinum - No SATA drives found?

My setup:
Athlon 64 3500+
K8N Neo4 Platinum
2GB OCZ 3200 Premier
2) WD Sata 80GB HD's (for RAID 0)
Nvidia 6800GT Extreme VGA
I was recently lucky enough to get my hands on a real Windows XP Pro64bit Extended Edition. I gathered quite a few 64bit drivers which claim to do the job (so they say.)
However I ran into a very strange issue during installation.
My main concern was getting RAID drivers to utilize after pressing F6 during the Windows install. Unfortunately I could not find Nvidia drivers so I went with the Silicon Image Sil3114 64bit drivers I got from their website. Copied them to a disk and thought I was ready to rock N roll. I have updated all BIOS to latest versions as of the date of this post.
Now I went into the RAID BIOS and setup my RAID 0 Array and both SATA drives are shown. All went well in this dept.
I began my installtion of XP64 and pressed F6 to install the RAID drivers. Popped the floppy in and the driver files were copied successfully.
I continued on to the point where you are prompted to setup Windows XP and it searches for any previous installs.
I continue to where I should get the dislmaimer and to press F8, however the install halts and say no hard drives were found. Setup cannot continue.
Any ideas as to why my drives are not being detected during installation? They show up fine under the RAID setup BIOS.
Any info or thoughts is truly appreciated.

You need to make your own floppy for the nvidia 64 ide drivers.
How to install Windows on SATA using F6 to load Drivers
Follow item 1 Obviously usinfg the Neo4 64bit unified driver pack Windows XP Professional x64 Edition
luck

Building system for friend with K8N Neo4 Platinum

MSI K8N Neo4 Platinum
AMD Athlon 64 3200+ Venice (ADA3200CGBOX)
CT2KIT12864Z40B (2x1GB)
eVGA 256-P2-N516 (7800GT)
WD2500KS (250GB SATAII HDD)
ATXA9N-SS/500 (Case)
Aspire 120MM
Aspire 80MM
ND-3550A (DVD-RW)
TG-480-U22 (PSU)
Can anyone recommend BIOS and drivers I should preload to a CD? I would rather not install from retail CDs only to download new ones.
Are there any other concerns or things I should know of?
Thanks!

Quote from: Kwea on 10-January-06, 23:21:38
MSI K8N Neo4 Platinum
AMD Athlon 64 3200+ Venice (ADA3200CGBOX)
CT2KIT12864Z40B (2x1GB)
eVGA 256-P2-N516 (7800GT)
WD2500KS (250GB SATAII HDD)
ATXA9N-SS/500 (Case)
Aspire 120MM
Aspire 80MM
ND-3550A (DVD-RW)
TG-480-U22 (PSU)
Can anyone recommend BIOS and drivers I should preload to a CD? I would rather not install from retail CDs only to download new ones.
Are there any other concerns or things I should know of?
Thanks!
You can use CD drivers (if needed to get connected to net) and update. because of the item on CD will be out dated
I'am using V1.09 BIOS, Nforce 666, GFX 7772 works good for me

Nforce 4 ultra k8n neo4 platinum need info

Similar Messages

Maybe you are looking for