[nForce] Current cpu clock has changed
My cpu was running ok, the bios showing Current CPU Clock 1833MHz, System Performance [Auto] and cPU FSB Clock [100MHz]. Some time ago I had a problem getting the AGP card to work, when I did I took a digitial photo of all the BIOS settings when the PD worked - thats how I know the above setting. A couple of day ago I noticed that the cpu was running cool and performance wasn't as good as it should be so I checked under "System Properties" and that shows an Athlon 1.09GHz. I've tried clearing CMOS and setting BIOS defaults (read on this forum somewhere). I've also tried FSB at 133, 166 and 200 but still only seem to report an Athlon 1.09GHz. Any suggestions.
MSI K7N2G-ILSR
400W PSU
Athlon XP 2500IBarton)
2x512Mb PC3200
Maxtor 80Gb SATA
ATI Radeon 9550 256Mb
Optorite CDRW
17" Nokia447Za
set perfomance to manual. set FSB:CPU in ration 1:1 set correct FSB to your CPU which must be 166. Frequency must be 1833MHz(PR 2500+).
Similar Messages
-
Weird Issue: CPU Clock Multiplier Changes During OSD TS only on Single Model at Single Site
Hey Guys -
I've got a weird issue I need suggestions on, please. I recently started at a company which already had pretty extensive OSD TS used for all models. One issue they were having was that a specific model (Dell E5440) at only one specific site would
not only go through the OSD TS slowly, but run slowly after being imaged. Weird issue!
The Issue
When looking into it today, I ran an extensive report on a machine with the issue and my system which is also an E5440. I exported the reports (16mb each) to a text file then compared in WinMerge. When I reached CPU Type, I found the following
difference:
My Machine: Intel Core i7-4600U, 3000 MHz (30 x 100)
E5440 /w Issue: Intel Core i7-4600U, 800 MHz (8 x 100)
As you can see, the multiplier is somehow at 8 instead of 30. how does this happen during OSD - especially - only at a single site which runs the exact same task sequence?
I looked through the TS (which I'm still becoming famailer with) but haven't seen anything which would edit the BIOS. To be honest, I wouldn't even think that changing the CPU clock would be possible with this type of model.
Any ideas or suggestions as to how to fix and/or (more importantly) why this is happening?
Thanks!
Ben K.Finally found issue. Wanted to post in case anyone had issue in the future. Turns out that the issue was not with SCCM.
The tech at that one site uses the same 65W power adapter for all models at his bench. As it turns out, the issue was that Intel Speedstep saw the 65W, thought it wasn't enough, so moved
the multiplier down to x8.
When having them try a 90W power adapter (which shipped with the system,) the issue was resolved and moved back up to where it should be.
Strange as Dell does sell a 65W as an accessory to the E5440, but doesn't mention any speed difference.
Thanks for your suggestions!
Ben K. -
Greetings - My Fellow MSI users!!
This is my first post and I'd like to welcome myself... Thank you, thank you!!
I must start off with saying that I've built a number of rigs before, but to date I'm having the most fun with this one (see specs in sig). This forum has provided me with a wealth of info and for that I thank you all for your input - VERY HELPFUL!
OK, now that's off my chest - here's my question -
Under the Cell Menu -
Where it lists Current CPU Clock and Current DDR Clock -
My Current DDR Clock lists 200 - Is this correct when I'm running Kingston KHX3200AK2/512 (2x256). I've up the voltages for the ram to 2.60v (as kingston indicated)... I cannot get the timing correct however... everytime I try to adjust, NO boot! This is true whether the the RAM is in slots 1&2 or 1&3. Is this a setting that can be/should be changed somewhere?
It seems pretty stable overall, but I keep thinking this thing should by flying right now!
Thanks
The specs incase the sig does not show up...
MSI K8N NEO2 Plat -
Athlon 64 3500+
Rosewill FX5200 256MB
Aspire 500W PSU
Seagate 80GB Sata
Kingston KHX3200AK2/512 (2x256Currently the settings are all on "Auto"
Kingston recommends 2-3-2-6-1
However when I try to enter those timings, by the time I get to the last entry "Row Precharge" there is no entry for #1 (only 2-6) and the one prior is "Min Ras#) is 5-15.
I've realized I need a better understanding of the timing settings because it seems really blurry right now.
I'll would like to give the your suggested timings a try, but clarify that 8 (in your 3-3-3-8) would be the selection for "Row Precharge" or "Min Ras#".... I'm thinking the latter of the 2 mentioned because "Row Precharge" only offers 2-6.
Thanks in advance! -
This is a simple one for you guys today.
I have noticed on these forums that most clock speeds are at least 133. My BIOS is showing
Current CPU clock 1250
CPU FSB clock 100
I am no master of the darker regions of the BIOS but should I be running a bit faster looking at my set up below?Cheers Guys
Both jumpers J10 and J11 were set to 133/166 already. I think it must have defaulted at sometime. I installed SP2 the other day, don't know if that effected it
I changed the set up to manual and changed to 1:1, (the ratio was set to 'By SPD').
Happy days -
My email address has changed and when I try to play purchased songs it asks me to authorize another computer under the old email address. How do I play the music that I have purchased? My account is current with the new email address.
You may have already done this, but try de-authorizing your computer (through the iTunes:Store menu) and then re-authorizing it.
-
Tabular form Update Error,"Current version of data in database has changed
I'm getting an error when updating a Apex Tabular form. It's complaining that the row id's are out-of-sync. The error reads,' Current version of data in database has changed since user initiated update process. current row version identifier = "56DW5A8A7EBA3B42073AE6E71480A784" application row version identifier = "99B52A15F10E34647E9E18B6B7AE8C30" .
Has anyone received this error? Any solutions? Note that the primary is being populated by a trigger. I have another tabular form for a different application that updates without issue, this however, uses a sequence to update the primary key.
Thanks,
JamesMake sure that the form is defined such that it "knows" that the PK is being set by a trigger. Do not try to set it in the form if the trigger is doing it. Pretty much if a trigger attempt to modify any column that also was editable (including hidden columns) in the form, the two will conflict.
The other issue could be that do you have any items on the rows that are disabled? Disabled items are not sent to session state so Apex won't be able to properly compute the checksum and it'll find a discrepancy. -
APEX Error: Current version of data in database has changed since user init
Hi:
APEX 4.1
I have a page with 2 regions. The first region is built with custom SQL using the APEX APIs. I have a process the can successfully update records.
I built the second region with the tabular form wizard. This created the multi row update process.
I created a region button and the two process respond to that button: process for first region, then process for the second region.
When I add data to the second region and click the region button, I get the following error:
Current version of data in database has changed since user initiated update process. current row version identifier = "A884FA378C851786DDFE3A33709CB23C" application row version identifier = "9ED06A0F09F80F054AB781CA24CC4CBF"
I know it has something to do with these two types of regions being on the same page, because when I create a page of just the table form, the data is updated.
Can anyone suggest what I might be doing wrong?
Thanks.Hello
If you try update the same data from 2 places you will got this message because:
Apex forms have locking mechanism.
1. During fetch data to form apex calculate checksum from every items on the forms.
2. Before update process apex again fetch data from database (in background) and calculate checksum again if checksum from point 1 is the same like this checksum APEX realy update data with new item values. If no, You will got your error (apex secure You, You realy don't know what you update).
According this if you change data which you use in the form between 1 and 2 point you will got this "error". You can check it for example if you change data from SQL/Plus or from other form.
Probably you forget about this locking mechanism during designe your process from APEX API <- successfully update records (maybe successful but you don't know what you updated) : )
If I helped You please check correct or helpful :) -
MRU Error : Current version of data in database has changed since user init
When i use HTMLDB Wizard to create Master Detail Form
(You can see step by step what i doing by see this url :
http://jroller.com/resources/w/wildan83/MRU%20Error.pdf
The is error in MRU :
Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-20001: ORA-20001: Current version of data in database has changed since user initiated update process. current checksum = "A884FA378C851786DDFE3A33709CB23C", item checksum = "0EEFFABE8252B0B279DB14A77F567F5D"., update "CNAP2"."ENROLLMENT" set "STUDENT_ID" = :b1, "SECTION_ID" = :b2, "ENROLL_DATE" = :b3, "FINAL_GRADE" = :b4.
If there something missing.., just say ..
Thanks for the help.Oh i see ..,i never think if that is the source of the MRU
error.
Ok ..,
Now ..., i have new question .., how can i change so the the primay key in detail table (enrollment table), i have one primary key with two columns .., if you don't understand what i mean ..,
check this alter table statement :
ALTER TABLE ENROLLMENT
ADD CONSTRAINT ENR_PK PRIMARY KEY
(STUDENT_ID
,SECTION_ID) ;
Now the question is .., when i using wizard to create master detail form .., html db automatically make student_id and section_id as the primary at "application level (html db)" .., how can i change this behaviour ..,
i want the html db not treat this two column as primary key ?
Do i have to create master detail form manually to accomplish this ?
Thanks before .., sorry if my english is not too good. -
ORA-20001: Current version of data in database has changed since user.....
Hi,
I am having a tabular form which I created using the wizard
I am facing the below error when I try to update or 'Add Row'
Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-20001: ORA-20001: Current version of data in database has changed since user initiated update process."
I havenot changed the query but I made certain columns based on select list,gave some default values,etc..
How can I solve this problem?
Also,I am getting the above error once I change the query for another tabular form.The client wanted some more fields to be displayed on the page.
How can I solve this problem too?
Thanks and Regards,
K.tannaCan somebody help me out?
-
ORA-20503: Current version of data in database has changed since user initi
Hi,
I am getting the below error when I try to update an existing record.
"ORA-20505: Error in DML: p_rowid=11887, p_alt_rowid=CASE_ID, p_rowid2=, p_alt_rowid2=. ORA-20503: Current version of data in database has changed since user initiated update process. current checksum = "7EB7B6F69DB421184B4CEE0884E435C6" application checksum = "53106AB0EB97FD1442D85F2AAE3AFA69"
Error Unable to process row of table "
And this does not happen always. IT happens once in a while and I am unable to check what is causing the issue. It is a critical issue and need to be fixed asap.
Any help is greatly appreciated!
Thanks!
KavyaWe are using Apex version: 3.1.2.00.02
What else could be the reason and how should I fix it?
At this point the application is migrated and I am unable to write a custom package for the DML operations. And this issue happens randomly and that too only while updating the data.
Please help! -
Ok, so what I'm interested in is automatically changing the cpu clock after <n> minutes and putting the clock back to "performance" governor when the mouse or keyboard is touched. Yes, I have tried the cpufrequtils and its ondemand governor with p4-clockmod (Celeron M inside) and it works ok, but not the way I want it. It is dynamic, but it's too fast. It changes clock immediately. What I want is to be able to automatically change it after 30mins, and put it back on to 1700MHz when the mouse or keyboard activity is present. So that's something like a screensaver from xset.
I would want it to execute this after <n> minutes:
echo <some_cpu_clock> > /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed
(p4-clockmod will already be loaded at boot)
Any ideas?
Last edited by archman-cro (2010-05-10 16:09:18)Ondemand is a problem for me cause when I stop working something, it automatically in a second drops the clock to the minimum, and when I want to do something after 10 seconds or so, I experience a slowdown when the clock is "rasing up", so that governor isn't really good for me. If you understand what i'm saying...
So, basically, I want something "less responsive" in terms of clock changes. Ondemand ones are too prompt for me.
Any further ideas about what you mentioned (X)?
Btw, found this code to determine the idle time from xscreensaver, but it only reports 6 ms max, dunno why...
http://coderrr.wordpress.com/2008/04/20 … e-in-unix/
Last edited by archman-cro (2010-05-10 11:32:58) -
Monitor setup has changed - KDE Daemon after sleep
After the monitor goes into powersave mode and is restored I keep gettung the Monitor setup has changed - KDE Daemon box, anyone know how to get rid of this? everything seams to work but the box is getting annoying. Logs dont show anything wrong and I have tried lots of things to fix it with no solution.
Ok still cant work this out. manually set monitor settings etc the box still pops up when waking monotor from sleep. logs still show nothing. Can anyone help?
Log below
[ 11.918]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 11.918]
X.Org X Server 1.13.2.901 (1.13.3 RC 1)
Release Date: 2013-02-15
[ 11.918] X Protocol Version 11, Revision 0
[ 11.918] Build Operating System: Linux 3.7.5-1-ARCH x86_64
[ 11.918] Current Operating System: Linux ThunderBolt.LoadBalancer.Org 3.7.9-2-ARCH #1 SMP PREEMPT Mon Feb 25 12:04:25 CET 2013 x86_64
[ 11.918] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bc60faad-b008-4f1f-8682-88d4c6f235cc ro quiet
[ 11.918] Build Date: 18 February 2013 03:52:56PM
[ 11.918]
[ 11.918] Current version of pixman: 0.28.2
[ 11.918] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 11.918] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11.918] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 6 17:45:33 2013
[ 12.161] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 12.326] (==) ServerLayout "ServerLayout0"
[ 12.326] (==) No screen section available. Using defaults.
[ 12.326] (**) |-->Screen "Default Screen Section" (0)
[ 12.326] (**) | |-->Monitor "<default monitor>"
[ 12.326] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 12.326] (**) | |-->Device "Intel Graphics"
[ 12.326] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 12.326] (**) Option "BlankTime" "0"
[ 12.326] (**) Option "StandbyTime" "0"
[ 12.326] (**) Option "SuspendTime" "0"
[ 12.326] (**) Option "OffTime" "0"
[ 12.326] (==) Automatically adding devices
[ 12.326] (==) Automatically enabling devices
[ 12.326] (==) Automatically adding GPU devices
[ 12.513] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 12.513] Entry deleted from font path.
[ 12.561] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 12.561] Entry deleted from font path.
[ 12.561] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 12.561] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 12.561] Entry deleted from font path.
[ 12.561] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 12.561] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 12.561] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 12.561] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 12.562] (II) Loader magic: 0x7fcc20
[ 12.562] (II) Module ABI versions:
[ 12.562] X.Org ANSI C Emulation: 0.4
[ 12.562] X.Org Video Driver: 13.1
[ 12.562] X.Org XInput driver : 18.0
[ 12.562] X.Org Server Extension : 7.0
[ 12.562] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 12.563] (--) PCI:*(0:0:2:0) 8086:2e22:1025:0251 rev 3, Mem @ 0xfe400000/4194304, 0xd0000000/268435456, I/O @ 0x0000dc00/8
[ 12.563] (--) PCI: (0:0:2:1) 8086:2e23:1025:0251 rev 3, Mem @ 0xfe900000/1048576
[ 12.762] Initializing built-in extension Generic Event Extension
[ 12.763] Initializing built-in extension SHAPE
[ 12.763] Initializing built-in extension MIT-SHM
[ 12.763] Initializing built-in extension XInputExtension
[ 12.763] Initializing built-in extension XTEST
[ 12.763] Initializing built-in extension BIG-REQUESTS
[ 12.763] Initializing built-in extension SYNC
[ 12.763] Initializing built-in extension XKEYBOARD
[ 12.763] Initializing built-in extension XC-MISC
[ 12.763] Initializing built-in extension SECURITY
[ 12.763] Initializing built-in extension XINERAMA
[ 12.763] Initializing built-in extension XFIXES
[ 12.763] Initializing built-in extension RENDER
[ 12.763] Initializing built-in extension RANDR
[ 12.763] Initializing built-in extension COMPOSITE
[ 12.763] Initializing built-in extension DAMAGE
[ 12.763] Initializing built-in extension MIT-SCREEN-SAVER
[ 12.763] Initializing built-in extension DOUBLE-BUFFER
[ 12.763] Initializing built-in extension RECORD
[ 12.763] Initializing built-in extension DPMS
[ 12.763] Initializing built-in extension X-Resource
[ 12.763] Initializing built-in extension XVideo
[ 12.763] Initializing built-in extension XVideo-MotionCompensation
[ 12.763] Initializing built-in extension XFree86-VidModeExtension
[ 12.763] Initializing built-in extension XFree86-DGA
[ 12.763] Initializing built-in extension XFree86-DRI
[ 12.763] Initializing built-in extension DRI2
[ 12.763] (II) LoadModule: "glx"
[ 12.816] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 12.828] (II) Module glx: vendor="X.Org Foundation"
[ 12.829] compiled for 1.13.2.901, module version = 1.0.0
[ 12.829] ABI class: X.Org Server Extension, version 7.0
[ 12.829] (==) AIGLX enabled
[ 12.829] Loading extension GLX
[ 12.829] (II) LoadModule: "intel"
[ 12.853] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 13.078] (II) Module intel: vendor="X.Org Foundation"
[ 13.078] compiled for 1.13.2.901, module version = 2.21.3
[ 13.079] Module class: X.Org Video Driver
[ 13.079] ABI class: X.Org Video Driver, version 13.1
[ 13.079] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 13.079] (++) using VT number 7
[ 13.213] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 13.213] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 13.213] (==) intel(0): RGB weight 888
[ 13.213] (==) intel(0): Default visual is TrueColor
[ 13.213] (**) intel(0): Option "AccelMethod" "sna"
[ 13.213] (--) intel(0): Integrated Graphics Chipset: Intel(R) G45/G43
[ 13.213] (**) intel(0): Framebuffer tiled
[ 13.213] (**) intel(0): Pixmaps tiled
[ 13.213] (**) intel(0): "Tear free" disabled
[ 13.213] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 13.253] (II) intel(0): Output VGA1 has no monitor section
[ 13.362] (II) intel(0): Output HDMI1 using monitor section HDMI1
[ 13.403] (II) intel(0): Output DP1 has no monitor section
[ 13.443] (II) intel(0): EDID for output VGA1
[ 13.552] (II) intel(0): EDID for output HDMI1
[ 13.552] (II) intel(0): Manufacturer: GSM Model: 56cc Serial#: 258443
[ 13.552] (II) intel(0): Year: 2011 Week: 4
[ 13.552] (II) intel(0): EDID Version: 1.3
[ 13.552] (II) intel(0): Digital Display Input
[ 13.552] (II) intel(0): Max Image Size [cm]: horiz.: 53 vert.: 30
[ 13.552] (II) intel(0): Gamma: 2.20
[ 13.552] (II) intel(0): No DPMS capabilities specified
[ 13.552] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 13.552] (II) intel(0): First detailed timing is preferred mode
[ 13.552] (II) intel(0): redX: 0.635 redY: 0.342 greenX: 0.292 greenY: 0.611
[ 13.552] (II) intel(0): blueX: 0.147 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 13.552] (II) intel(0): Supported established timings:
[ 13.552] (II) intel(0): 640x480@60Hz
[ 13.552] (II) intel(0): 800x600@60Hz
[ 13.552] (II) intel(0): 1024x768@60Hz
[ 13.552] (II) intel(0): Manufacturer's mask: 0
[ 13.552] (II) intel(0): Supported standard timings:
[ 13.552] (II) intel(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 13.552] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 13.552] (II) intel(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 13.552] (II) intel(0): Supported detailed timing:
[ 13.552] (II) intel(0): clock: 138.5 MHz Image Size: 531 x 299 mm
[ 13.552] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 13.552] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
[ 13.552] (II) intel(0): Supported detailed timing:
[ 13.552] (II) intel(0): clock: 148.5 MHz Image Size: 531 x 299 mm
[ 13.552] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 13.552] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 13.552] (II) intel(0): Ranges: V min: 56 V max: 61 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz
[ 13.552] (II) intel(0): Monitor name: W2442
[ 13.552] (II) intel(0): Supported detailed timing:
[ 13.552] (II) intel(0): clock: 148.5 MHz Image Size: 531 x 299 mm
[ 13.552] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 13.552] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 13.552] (II) intel(0): Supported detailed timing:
[ 13.552] (II) intel(0): clock: 74.2 MHz Image Size: 531 x 299 mm
[ 13.552] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 13.552] (II) intel(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 13.552] (II) intel(0): Supported detailed timing:
[ 13.552] (II) intel(0): clock: 74.2 MHz Image Size: 531 x 299 mm
[ 13.552] (II) intel(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 13.552] (II) intel(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 13.552] (II) intel(0): Supported detailed timing:
[ 13.552] (II) intel(0): clock: 27.0 MHz Image Size: 531 x 299 mm
[ 13.552] (II) intel(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 13.552] (II) intel(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 13.552] (II) intel(0): Number of EDID sections to follow: 1
[ 13.552] (II) intel(0): EDID (in hex):
[ 13.552] (II) intel(0): 00ffffffffffff001e6dcc568bf10300
[ 13.552] (II) intel(0): 0415010380351e780aaec5a2574a9c25
[ 13.552] (II) intel(0): 125054210800b3008180814001010101
[ 13.552] (II) intel(0): 0101010101011a3680a070381f403020
[ 13.552] (II) intel(0): 3500132b2100001a023a801871382d40
[ 13.552] (II) intel(0): 582c4500132b2100001e000000fd0038
[ 13.552] (II) intel(0): 3d1e530f000a202020202020000000fc
[ 13.552] (II) intel(0): 0057323434320a202020202020200128
[ 13.552] (II) intel(0): 020321f14e900403011412051f101300
[ 13.552] (II) intel(0): 000000230907078301000065030c0010
[ 13.552] (II) intel(0): 00023a801871382d40582c4500132b21
[ 13.552] (II) intel(0): 00001e011d8018711c1620582c250013
[ 13.552] (II) intel(0): 2b2100009e011d007251d01e206e2855
[ 13.552] (II) intel(0): 00132b2100001e8c0ad08a20e02d1010
[ 13.552] (II) intel(0): 3e9600132b2100001800000000000000
[ 13.552] (II) intel(0): 00000000000000000000000000000026
[ 13.552] (II) intel(0): Printing probed modes for output HDMI1
[ 13.552] (II) intel(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 13.552] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 13.552] (II) intel(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 13.552] (II) intel(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 13.552] (II) intel(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 13.552] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 13.552] (II) intel(0): Modeline "1680x945"x60.0 131.48 1680 1784 1960 2240 945 946 949 978 -hsync +vsync (58.7 kHz)
[ 13.552] (II) intel(0): Modeline "1400x1050"x59.9 101.00 1400 1448 1480 1560 1050 1053 1057 1080 +hsync -vsync (64.7 kHz e)
[ 13.552] (II) intel(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 13.552] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 13.552] (II) intel(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 13.552] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 13.552] (II) intel(0): Modeline "1366x768"x60.0 85.89 1366 1439 1583 1800 768 769 772 795 -hsync +vsync (47.7 kHz)
[ 13.552] (II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 13.552] (II) intel(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 13.552] (II) intel(0): Modeline "1280x768"x60.0 68.25 1280 1328 1360 1440 768 771 778 790 +hsync -vsync (47.4 kHz e)
[ 13.552] (II) intel(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 13.552] (II) intel(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 13.552] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 13.552] (II) intel(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
[ 13.552] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 13.552] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 13.552] (II) intel(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 13.552] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 13.552] (II) intel(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 13.552] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 13.552] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 13.593] (II) intel(0): EDID for output DP1
[ 13.593] (II) intel(0): Output VGA1 disconnected
[ 13.593] (II) intel(0): Output HDMI1 connected
[ 13.593] (II) intel(0): Output DP1 disconnected
[ 13.593] (II) intel(0): Using exact sizes for initial modes
[ 13.593] (II) intel(0): Output HDMI1 using initial mode 1920x1080
[ 13.593] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 13.593] (==) intel(0): DPI set to (96, 96)
[ 13.593] (II) Loading sub module "dri2"
[ 13.593] (II) LoadModule: "dri2"
[ 13.593] (II) Module "dri2" already built-in
[ 13.593] (==) Depth 24 pixmap format is 32 bpp
[ 13.793] (II) intel(0): SNA initialized with Broadwater/Crestline backend
[ 13.793] (==) intel(0): Backing store disabled
[ 13.793] (==) intel(0): Silken mouse enabled
[ 13.793] (II) intel(0): HW Cursor enabled
[ 13.793] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 13.794] (==) intel(0): DPMS enabled
[ 13.794] (II) intel(0): Overlay video not supported on this hardware
[ 13.794] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 13.794] (II) intel(0): [DRI2] Setup complete
[ 13.794] (II) intel(0): [DRI2] DRI driver: i965
[ 13.794] (II) intel(0): direct rendering: DRI2 Enabled
[ 13.794] (==) intel(0): hotplug detection: "enabled"
[ 13.794] (--) RandR disabled
[ 14.124] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 14.124] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 14.124] (II) AIGLX: enabled GLX_ARB_create_context
[ 14.124] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 14.124] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 14.124] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 14.124] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 14.124] (II) AIGLX: Loaded and initialized i965
[ 14.124] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 14.125] (II) intel(0): switch to mode 1920x1080 on crtc 3 (pipe 0)
[ 14.210] (II) intel(0): Setting screen physical size to 508 x 285
[ 14.922] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 14.922] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.922] (II) LoadModule: "evdev"
[ 14.922] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.957] (II) Module evdev: vendor="X.Org Foundation"
[ 14.957] compiled for 1.13.0, module version = 2.7.3
[ 14.957] Module class: X.Org XInput Driver
[ 14.957] ABI class: X.Org XInput driver, version 18.0
[ 14.957] (II) Using input driver 'evdev' for 'Power Button'
[ 14.957] (**) Power Button: always reports core events
[ 14.957] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 14.957] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 14.957] (--) evdev: Power Button: Found keys
[ 14.957] (II) evdev: Power Button: Configuring as keyboard
[ 14.957] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 14.957] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 14.957] (**) Option "xkb_rules" "evdev"
[ 14.957] (**) Option "xkb_model" "evdev"
[ 14.957] (**) Option "xkb_layout" "us"
[ 14.988] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 14.988] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.988] (II) Using input driver 'evdev' for 'Power Button'
[ 14.988] (**) Power Button: always reports core events
[ 14.988] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 14.988] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 14.988] (--) evdev: Power Button: Found keys
[ 14.989] (II) evdev: Power Button: Configuring as keyboard
[ 14.989] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 14.989] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 14.989] (**) Option "xkb_rules" "evdev"
[ 14.989] (**) Option "xkb_model" "evdev"
[ 14.989] (**) Option "xkb_layout" "us"
[ 14.989] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 14.989] (II) config/udev: Adding input device UVC Camera (046d:0825) (/dev/input/event14)
[ 14.989] (**) UVC Camera (046d:0825): Applying InputClass "evdev keyboard catchall"
[ 14.989] (II) Using input driver 'evdev' for 'UVC Camera (046d:0825)'
[ 14.989] (**) UVC Camera (046d:0825): always reports core events
[ 14.989] (**) evdev: UVC Camera (046d:0825): Device: "/dev/input/event14"
[ 14.989] (--) evdev: UVC Camera (046d:0825): Vendor 0x46d Product 0x825
[ 14.989] (--) evdev: UVC Camera (046d:0825): Found keys
[ 14.989] (II) evdev: UVC Camera (046d:0825): Configuring as keyboard
[ 14.989] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input14/event14"
[ 14.989] (II) XINPUT: Adding extended input device "UVC Camera (046d:0825)" (type: KEYBOARD, id 8)
[ 14.989] (**) Option "xkb_rules" "evdev"
[ 14.989] (**) Option "xkb_model" "evdev"
[ 14.989] (**) Option "xkb_layout" "us"
[ 14.990] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event4)
[ 14.990] (II) No input driver specified, ignoring this device.
[ 14.990] (II) This device may have been added with another device file.
[ 14.990] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event10)
[ 14.990] (II) No input driver specified, ignoring this device.
[ 14.990] (II) This device may have been added with another device file.
[ 14.991] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event11)
[ 14.991] (II) No input driver specified, ignoring this device.
[ 14.991] (II) This device may have been added with another device file.
[ 14.991] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event12)
[ 14.991] (II) No input driver specified, ignoring this device.
[ 14.991] (II) This device may have been added with another device file.
[ 14.991] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event13)
[ 14.991] (II) No input driver specified, ignoring this device.
[ 14.991] (II) This device may have been added with another device file.
[ 14.991] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event6)
[ 14.991] (II) No input driver specified, ignoring this device.
[ 14.991] (II) This device may have been added with another device file.
[ 14.992] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event7)
[ 14.992] (II) No input driver specified, ignoring this device.
[ 14.992] (II) This device may have been added with another device file.
[ 14.992] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event8)
[ 14.992] (II) No input driver specified, ignoring this device.
[ 14.992] (II) This device may have been added with another device file.
[ 14.992] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event9)
[ 14.992] (II) No input driver specified, ignoring this device.
[ 14.992] (II) This device may have been added with another device file.
[ 14.993] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 14.993] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 14.993] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 14.993] (**) AT Translated Set 2 keyboard: always reports core events
[ 14.993] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 14.993] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 14.993] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 14.993] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 14.993] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 14.993] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 14.993] (**) Option "xkb_rules" "evdev"
[ 14.993] (**) Option "xkb_model" "evdev"
[ 14.993] (**) Option "xkb_layout" "us"
[ 14.993] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event5)
[ 14.993] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 14.993] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
[ 14.993] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 14.993] (**) evdev: ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event5"
[ 14.993] (--) evdev: ImPS/2 Generic Wheel Mouse: Vendor 0x2 Product 0x5
[ 14.993] (--) evdev: ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[ 14.993] (--) evdev: ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[ 14.993] (--) evdev: ImPS/2 Generic Wheel Mouse: Found relative axes
[ 14.993] (--) evdev: ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[ 14.993] (II) evdev: ImPS/2 Generic Wheel Mouse: Configuring as mouse
[ 14.993] (II) evdev: ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
[ 14.994] (**) evdev: ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 14.994] (**) evdev: ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 14.994] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
[ 14.994] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 10)
[ 14.994] (II) evdev: ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[ 14.994] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[ 14.994] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[ 14.994] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 14.994] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 14.994] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse0)
[ 14.994] (II) No input driver specified, ignoring this device.
[ 14.994] (II) This device may have been added with another device file.
[ 14.994] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 14.994] (II) No input driver specified, ignoring this device.
[ 14.994] (II) This device may have been added with another device file.
[ 23.841] (II) intel(0): EDID vendor "GSM", prod id 22220
[ 23.841] (II) intel(0): Using EDID range info for horizontal sync
[ 23.841] (II) intel(0): Using EDID range info for vertical refresh
[ 23.841] (II) intel(0): Printing DDC gathered Modelines:
[ 23.841] (II) intel(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 23.841] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 23.842] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 23.842] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 23.842] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 23.842] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 23.842] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 23.842] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 23.842] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 23.842] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 23.842] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 23.842] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 23.842] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 23.842] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 23.842] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 23.842] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 23.842] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 23.884] (II) intel(0): switch to mode 1920x1080 on crtc 3 (pipe 0)
[ 24.108] (II) intel(0): EDID vendor "GSM", prod id 22220
[ 24.108] (II) intel(0): Using hsync ranges from config file
[ 24.108] (II) intel(0): Using vrefresh ranges from config file
[ 24.108] (II) intel(0): Printing DDC gathered Modelines:
[ 24.108] (II) intel(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 24.108] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 24.108] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 24.108] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 24.108] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 24.108] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 24.108] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 24.108] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 24.108] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 24.108] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 24.108] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 24.108] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 24.108] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 24.108] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 24.108] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 24.108] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 24.108] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 33.191] (II) intel(0): EDID vendor "GSM", prod id 22220
[ 33.191] (II) intel(0): Using hsync ranges from config file
[ 33.191] (II) intel(0): Using vrefresh ranges from config file
[ 33.191] (II) intel(0): Printing DDC gathered Modelines:
[ 33.191] (II) intel(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 33.191] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 33.191] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 33.191] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 33.191] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 33.191] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 33.191] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 33.191] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 33.191] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 33.191] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 33.192] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 33.192] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 33.192] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 33.192] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 33.192] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 33.192] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 33.192] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 40.998] (II) intel(0): EDID vendor "GSM", prod id 22220
[ 40.998] (II) intel(0): Using hsync ranges from config file
[ 40.998] (II) intel(0): Using vrefresh ranges from config file
[ 40.998] (II) intel(0): Printing DDC gathered Modelines:
[ 40.998] (II) intel(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 40.998] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 40.998] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 40.998] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 40.998] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 40.998] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 40.998] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 40.998] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 40.998] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 40.998] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 40.998] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 40.998] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 40.998] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 40.998] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 40.998] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 40.998] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 40.998] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 936.094] (II) evdev: ImPS/2 Generic Wheel Mouse: Close
[ 936.094] (II) UnloadModule: "evdev"
[ 936.094] (II) evdev: AT Translated Set 2 keyboard: Close
[ 936.094] (II) UnloadModule: "evdev"
[ 936.094] (II) evdev: UVC Camera (046d:0825): Close
[ 936.094] (II) UnloadModule: "evdev"
[ 936.094] (II) evdev: Power Button: Close
[ 936.094] (II) UnloadModule: "evdev"
[ 936.094] (II) evdev: Power Button: Close
[ 936.094] (II) UnloadModule: "evdev"
[ 936.194] Server terminated successfully (0). Closing log file.
kde log
Note that your system uses syslog. All of kdm's internally generated messages
(i.e., not from libraries and external programs/scripts it uses) go to the
daemon.* syslog facility; check your syslog configuration to find out to which
file(s) it is logged. PAM logs messages related to authentication to authpriv.*.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
klauncher(7126) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(7120)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(7120)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
klauncher(7543) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(7537)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(7537)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
kdmgreet: Fatal IO error: client killed
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
klauncher(326) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(285)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(285)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
klauncher(341) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(294)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(294)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
klauncher(273) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(264)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(264)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Error: Can't find file "uk" for symbols include
> Exiting
> Abandoning symbols file "default"
Errors from xkbcomp are not fatal to the X server
klauncher(857) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(847)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(847)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Error: Can't find file "uk" for symbols include
> Exiting
> Abandoning symbols file "default"
Errors from xkbcomp are not fatal to the X server
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Error: Can't find file "uk" for symbols include
> Exiting
> Abandoning symbols file "default"
Errors from xkbcomp are not fatal to the X server
klauncher(1223) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(1215)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(1215)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Error: Can't find file "uk" for symbols include
> Exiting
> Abandoning symbols file "default"
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
klauncher(269) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(263)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(263)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
klauncher(706) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(700)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(700)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
klauncher(2630) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(2624)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(2624)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
klauncher(3118) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(3112)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(3112)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
klauncher(4638) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(4632)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(4632)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
klauncher(5014) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(5008)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(5008)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extensio -
Cmd and has changed what it does
For quite a while now I've used Cmd and +/= and Cmd and - to increase and decrease the font size of a text window. This week it has changed and I'm puzzled. When I hold Cmd and press the =/+ keyThe bottom inch (on my iMac 27") of my display shifts up and an new row of Icons appear. The Dock is now above this new row and the Dock works fine. The new row has icons labeled in order: Widgets, Address Book, Calculator, Devonthink jot, Dictionary, ESPN, Flight Tracker, iCal, Movies, Ski Report, Stickies, Stocks, Tile Game, Translation, Unit Converter, Weather, Web Clip, and World Clock. Also a bunch of (8) circles (white with black centers with a white X in the center - like a close icon) appear randomly around my display.
The new bar of Icons look to be possibly convenient but where did they come from?
By experimenting, I found that if I hold Cmd and Shift then press the =/+ key, I get the larger font. Cmd with the - key still reduces the font.
Here is what I see:More Information. I was struck by how the list of things I made in the first note above, resembled Widgets in the Dashboard. I have the Dashboard configured to be one of the spaces to make it easy to get to. I went to look at it. In the lower left corner of the Dashboard is a circled Plus sign. If I click that, I get the same bar of icons across the bottom of the screen.
On a regular space the icons didn't do anything when I clicked them. On the Dashboard they bring up the named widget.
When the bar appeared on a regular space, the menu was shifted off the top of the screen.
Weirdest of all, now that I've worked with the widgets in the Dashboard, Cmd and +/= no longer brings up the widget icon bar but, as before, now enlarges the font of the current text window or picture or movie.
Very weird. This has now moved from being a request for help to one for possibly clarification of something pretty confusing. -
The RF-ID Tag has changed.
System-security - Keyboard is locked.
Adaptec AHA-2940 Ultra/Ultra W SCSI BIOS v.1.32S8
(c) 1997 Adaptec, Inc. All Rights Reserved.
SCSI BIOS Installed Successfully!
System-security - Keyboard is unlocked.
176 The system has been tampered with.
Turn power to your system OFF and then ON.
Your system is now locked.
I downloaded Sun's Java Run-Time Environment (v.1.4.2 02) last night so that I could use another program that requires it to operate. Everything went fine during installation, until the installation program asked me to shut the computer off and turn it back on before the installation would be complete. Since then I haven't been able to use my computer. I get the above message. I am upset to say the least. Please tell me what I can do to get my computer back.Just to review the scope of this thread:
This is not a Java issue.
This message only occurs on IBM systems; laptop, workstations and servers. The full value is 0176 and is hexadecimal.
The important line here is:
176 The system has been tampered with.
My inerpretation: For older servers by HP and IBM, they often forced you to run their configuration utility after you make hardware changes or if a stored checksum mismatches (similar to CMOS checksum error on personal systems).
Here is an IBM page that talkes about this and other POST messages on some models:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-42321
Error code:
0176
Symptom or error:
System Security. The system has been tampered with.
Field replaceable unit or action, in sequence:
1. Run IBM BIOS Setup Utility, and then save current setting by pressing F10.
2. System board.
http://www-1.ibm.com/support/docview.wss?rs=0&uid=psg1MIGR-4BAHK2
POST error code:
176
Component(s) to troubleshoot or replace
Covers were removed from the computer.
http://www-306.ibm.com/pc/support/site.wss/document.do?lndocid=DDSE-43WNL9
Error code: 0176 (CPU failure - Slot 1, CPU # 1)
FRU/Action:
1. Reseat processor module
2. Processor Module
3. Processor Board
You get the idea: Find the POST code documentation for your model.
Now, on the issue of those capacitors. I thought that only happend on cheap systems. The was a problem was traced to a bad engineering change made in capacitors, primarily in Taiwan, in about 2001that results in them failing after perahsp one year of service. Here are some realted links:
http://www.feistworks.com/ben/3comfix/
http://www.theregister.co.uk/2003/02/06/stolen_formula_torpedos_big_brand/ -
CPU Clock speed with Belle Update
The original symbian^3 devices run on the ARM 11 Processor which has been optimized to function close to 1GHz. But they're currently running at a speed of 680 MHz. My request to Nokia is that please optimize our processor speed to atleast 1GHz with the upcoming belle update. If you haven't planned on doing it, please do it with a minor update atleast after you release belle. I'm not an expert on this. So suggestion and comments are welcome.
blitZkid
Nokia C7: Running on Nokia Belle
"If I'm helpful in anyway, a click of appreciation on the star would be nice"bumblebirra wrote:
I would be surprised if the rest of the hardware in the phone, like the RAM etc, couldn't support the maximum CPU clock speed. When such sophisticated electronic devices are designed it's impossible to know until it's all been put together how it will actually perform as a complete unit - the hardware, software, battery capacity, etc. The clock speed allows a fine-tuning once everything comes together, to get the optimal balance.
Well-made software makes a huge difference to how much CPU/hardware resources are required. Software efficiency is the most important factor of all.
A GPU is only there to perform tasks that would otherwise take up huge amounts of CPU resources. Dedicated graphical tasks such as 2D scrolling, 3D texture-mapping/filling for example. But that's all. The CPU is still running the whole show, but just has much of the load taken off it by the GPU.
So with the GPU doing more and more, the CPU and it's speed become less relevant.
A few things here, some of what you have mentioned I agree with. But some I dont. Firstly when any device is designed, things like the GPU and RAM are all allowed for, that is the speed at which each is capable. There is no use taking pot luck saying oh we think that will be enough. Its all calculated right from the word go.
Its done for several reasons, firstly costings, there is no use producing something that is so expensive no will be able to afford it. secondly to make sure you dont end up with bottle necks in data flow. Also it no use producing something that is so slow that you cant do anything worthwhile on it. That is some of the reasons.
You are absolutely right about software, well made software installed in a relatively slow running device can quite often beat poorly designed software running on a fast machine at exactly the same task. O/S like windows for instance, in my opinion only, whilst full of features, is definitely bloated, and not well designed. A standard install disc for windows these days is around the 3Gig mark (depending on version of OS), where as something that does exactly the same thing like Linux still fits on a 700M cd.
And you are right about the GPU, its does relieve the pressure on the cpu. Unfortunately the gpu in an N8 or an E7 is only running at 200Mhz. Considering most things are graphical based on these phones. I would have to wonder how much of the gpu is being used, especially when the one chip is running everything from the 2d/3d graphics/rendering, the camera up to 12MP, HDMI, HD video recording and play back, a stack of video codecs etc.
Unfortunately the main cpu from everything i was able to find is simply listed as an ARM11, these processors run on several Nokia's phone, including the older E90 (which had dual cpu's but ran at much slower speed of about 332 Mhz., however the Arm site list the ARM 11 as several versions, including one that actually has 4 cpu on the one the chip but only presents itself as 1 cpu to the rest of the hardware, with this cpu running anywhere up to 1Ghz. So its entirely possible that the 680Mhz listed for the N8/E7 could be as fast as it goes. Also the current versionof the ARM11 have a power consumption of 0.21mW/Mhz. so based on that figure a processor running at 680Mhz would consume 142.8 mW, but at 1G it would be 210mW, that a difference of 67.2mW. That would mean your phone would go flat a lot quicker. This info is based solely on information that I can find on Nokia run sites, ARM's site and broadcoms site. That way we can beleive what we are able to read with some certainty. I did find other non-related site suggesting 720mhz for the cpu, but they are only a 3rd party mobile news site, that said it had been suggested that it was capable of 720Mhz..
But i do firmly believe with efficient code the phones can perform extremely well, Anna certainly seems faster than the old Symbian ^3 version that was on the phone prior to Anna, whether or not Belle can be made any more efficient remains to be seen. But heres hoping.
Maybe you are looking for
-
Problem with working in Flash Builder 4
Hi there, I am working on the develepment of a new kind of website in 3D. For this I am using Flash Builder 4 AS3 Project and the 3D program Away3D. The problem is that I created a SWF in one AS3 project called PoloSWF. In another project I created a
-
P7N Platinum Q6600 @ 3.5GHz, you to can do it
Just thought I would share my results of getting over the dreaded 3.0GHz wall. I'm still in the testing phase (running 4 prime95 at maximum heat consumption right now), it seems to be running quite strong. I can probably hit 3.6GHz or more, but tha
-
If anyone is tracking such reports, after cautiously experimenting with Lion on my Macbook Pro I decided to take the leap and try to upgrade my Mac Pro. Right off the bat Soundtrack Pro did not work, specifically in that it didn't recognize my MOTU T
-
SYNTAX: Fixed width table columns
How do I make the <bc4j:table ... > columns display a fixed width with no wrapping? Thanks for any info.
-
Hi, In the Account assignment field settings for the following movement types , the GL account for offset posting are being overriden manually by entering those account codes to which,manual posting is permitted. 501/505: Receipt w/o purchase order