NForce driver 6.11 BETA

From a German site kinda slow but the D/L is really Fast !
Heres whats new.
Audio driver version 4.55 (9/30 nightly INF)
Audio utility version 4.49
Ethernet NRM driver version 4.57
Network management tools version 4.57
SMBus driver version 4.45 (WHQL) with updated uninstaller files
Installer version 4.55
Win2K IDE 2.7 driver version 4.64 (WHQL)
WinXP IDE 2.7 driver version 4.64 (WHQL)
An NVidia System Utility 2.00.17.05, which is now called NTune!
http://www.hardwareluxx.de/download.php?det=175

Quote
Originally posted by Foul
don't find them url ?
edit : found :hypecrite:
http://www.hardwareluxx.de/andreas/Stuff/Software/nTune_Software.rar
PS that was the fastest DL ive ever done 783kb sec

Similar Messages

PC wont boot after installing nforce driver on MSI K8N Neo Platinum

After installing the nforce driver my system won't boot again. If i use safe mode it stops at the file mup.sys . Does anybody know anything about this?

Can you provide a signature with all of your hardware information like my signature (see below). Include drives and locations. Better chance you'll get help that way

Kernel forcedeth and intel audio or nforce driver modules?

I recently discovered Nvidia makes nforce driver modules thanks to the recent packages listed on the Arch website. I have long since been using the Vanilla kernel drivers built in (which are reversed engineered or similar chipsets) without any problems.
My question is, are there any reasons I should switch over to Nvidia modules other than the fact that they are native to the manufactuer (performance, stability gains etc.)? I've noticed some posts have touched on this issue but they don't explain anything other than what looks like users preference.
Thanks for any info,

Before the forcedeth module was available, I would always go here for help:
http://www.nforcershq.com/forum/viewforum.php?f=29
One version, some people were having problems with the forcedeth module, but that was long ago. I also remember some bandwith tests, but I have not been to the site in ages.
I quickly looked around and it appears nvidia is contributiong to the forcedeth module anyway. I don't know about the sound.

Nforce driver gone?

i have a bit of a wierd promblem iw ent to install the nforce
drivers from the cd that came with my mobo and there was no nforce driver option in the driver part?
this stump me because the first time i used the cd it was there, but now after i reformated and reinstalled windows its gone!
what could be causing this?
i could go to nvidia site and download the drivers but im just confused why its not showing on the mobo cd
thanks any help or opions would greatly help
K8N Diamond plus
AMD 4800+X2
Corsair xms DDR 433 (PC 3500)2-3-2-6
BFG 7900gtx512 sli
2x74 wd Raptor Raid 0
Creative X-FI
Plextor 16X DVD±R DVD
enermax 620 librity

Spray,
Just by the very nature of a CD, it makes it useless.
The Hardware Manufacturer gets the Drivers from the Chipset Manufacturer and then edits them to add their logo etc. Then they put the Drivers on a CD. Then they package it with the hardware. Then it is sent to a distributer where they warehouse it until it is sent to a reseller. Then finally the reseller has it in the shelf until you come in and buy it.
Those Drivers are anywhere from 6 month to 1 year or more old.
As I look at it, even the software on the Manufacturer's website is out of date.
If you want Drivers, you go right to the Chipset Manufacturer.
Take Care,
Richard
P.S. Just remember, just because a piece of Hardware or Software is new to you, it does not mean it is New! It could have been on the shelf for years.

Firewire 400 external vs internal hard drive - which is better?

I’m thinking of buying a handy little Mac Mini (circa 2008) from a friend to replace my ageing, workhorse Powermac (sniff).
The only problem is, it comes with an absolutely measly 60GB HDD. I want to replace this and boot from a new drive, but am stuck between getting a new internal drive (very hard to install, but obviously I don’t have a warranty to worry about) or an external fire-wire 400 drive (very expensive in relation).
Which will run quicker or better? Internal or Fire-wire 400? (I’m a typical Mac user – lots of internet, quite a lot of iPhoto, a bit of iMovie here and a bit of Dreamweaver there)
Also, I really want to use an Iomega one that matches the mini (I’m buying a mini to save space and reduce clutter in the first place..) – has anyone used this as their bootable drive with success??

A 7200 RPM internal will be the fastest. But Firewire-400 will be pretty good, too, especially if it is a 3.5-inch model.
Assuming the current internal has no problems, you could reformat it and make it the boot drive, but keep all your data on a firewire external.
Generally drives start noticeably slowing down once more than 50% full; so if you can keep the internal (boot) drive under 50%, it might surprise you with how fast it could be.

Printer Driver: Is it Better to Use Software Update? Or the Manufacture's?

Hi. Which is better: the driver from the manufacturer's or the one that software update installs? Thank you in advance.
Gbu

Many of the drivers available via Software Update have been provided by the printer vendor to Apple so that the SU facility is possible. Apple are no longer in the business of making printers (technically they never were) or printer drivers.
What has happened on some occasions is that the vendor appears to take much longer to make the same driver available on their own web site. Or they may take the approach as mentioned in the other post of supplying the drivers to Apple for inclusion in the OS and don't bother with providing the driver themselves.
So the answer is that you will often have a better chance of getting a driver that supports your version of OS X via SU rather than the vendors own web site.

New Nforce driver 2.0 Released !!

@@@@@@Release Highlights@@@@@@
11am PST update: kit updated to correctly recognized graphics driver WHQL logo
First full unified package for nForce and nForce2
Full localizations for all languages
Fixes audio DirectX BSOD issue on Windows XP systems
Adds ASIO driver support
Adds OpenAL driver support
Updated nForce Audio control panel
Incorporates performance improvements and other bug fixes
@@@@@Notes@@@@@
Windows XP users must install Service Pack 1 prior to attempting to install this package. Failure to do so will result in the inability to support USB 2.0 and NVIDIA IDE drivers.
Audio drivers will not install on the following nForce2 products: ASUS A7N8X and Chaintech 7NJS. Please use the drivers that come with these products to enable audio functionality.
USB keyboards and/or mice will be disabled during the installation of this package. Please connect PS2 devices before starting the installation process.
@@@@@Driver Versions@@@@@
Audio driver 3.06 WHQL
Audio control panel 3.07
Network driver 2.81 WHQL
GART driver 2.78 WHQL
SMBus driver 2.75 WHQL
Memory controller driver 2.75 WHQL
IDE driver 2.70 In The Box WHQL
IDE driver 3.07 Full Driver
Display Drivers 40.72 WHQL
Bye ...

I had to manually install the drivers on my existing xp installation. aside from that I have not gotton the black screen playing aaops with surround turned on which is when it was occuring. The installer did however extract the drivers to the c drive nicely. On a seperate partition and a clean install of xp the drivers did successfully install the agp driver but I had to manually install the soundstorm, memory, sound, and network. For anyone wondering how to install the soundstorm drivers manually I did mine by goijng to the directory where the files for the audio utilities were extracted finding the inf file right clicking and selecting install. I noticed one thing that might be a problem and that was the part where the microsoft sound files get installed didn't come up. however the soundstorm control panel and tray icon both function normally. On the existing XP installation I first removed all of items for nforce which were in the add remove programs control panel and then updating the drivers listed in the device manager again when I installed the sound drivers and utility the microsoft installer did not come up either, but the tray icon and control panel seem to work finem

What files off the new nforce driver r required

hi im trying 2 make a new driver floppy 4 windows install of the sata drivers eg sata raid and storage controller but i am unsure as 2 what files i need from the new nforce 5.10 unified driver from nvidia. the reason im doing this is my floppy i received from msi is corrupt and i wish 2 setup my raid 0.
my moboard is k8n neo2 platinum

See 1)

Leadtec v1.07 Nforce driver query

Hi all,
I recently installed the Leadtec v1.07 drivers as I believe they are the newest Nforce drivers around and they are all WHQL'd. However, now in Device Manager under the System Devices section, all the Nvidia items (Memory controllers, AGP to PCI bridge and PCI system management) are listed as using v1.0.0.0 drivers - the original release drivers as far as I'm aware. This seems wrong since the new Leadtec drivers should include updates for these.
I was wondering if anyone with the same drivers installed could let me know what their driver versions are listed as for these devices?
Thanks for any help.

Surprisingly, the very same query is working fine on the same model loaded in 10g database. So, is this a bug in 11g?

NForce Driver Installation Procedure

What are the official steps to installing new nForce drivers? I have read everything from install over the existing drivers to uninstall the existing drivers --> boot into safe mode --> Uninstall the NVidia Video drivers --> Use Drive Cleaner to wipe everything out (nForce and ForceWare related) --> boot into normal mode and install new nForce drivers --> reboot and install new ForceWare (video) drivers.
Which way is correct or is there another 'preferred' way?
Thanks gang,
Jopopsy

There really shouldn't be any need to uninstall drivers before updating them.
The whole idea of an install is that it should take care of this for you. I generally just run the setup and let it run through, followed by a reboot, and have never had any problems. Why make things more difficult for yourself?

Fusion Drive: the best bet?

I'm a graphic designer that works on some fairly intensive Adobe Creative Suite files. I'm about to get a new iMac and am debating going between the 1TB fusion drive, or the 512 flash storage. How do Fusion drives fare with "power users" or whatever? Am I better off just sticking with the Flash storage?

     If space is a big issue and you don't want an external sitting around that might tip you toward a fusion drive. It's nice to be uncluttered. If you will do much video work you'll want an external anyway so that might tip you to a pure SSD internal.
     A pure SSD internal will be faster. Since Apple uses slow 5400 drives in their fusion drives I would not personally bother with them since I do video and need an external anyway.
     If you want pure speed an SSD is the way to go. Fusion drives are faster than non fusion but slower than SSD. Either way you want an external backup so personally I think an SSD with an one external for storage and one for backup is the way to go for most heavy users. I have four external drives in two cases and backups for them.

K7N420 - MSI-6373 - can nForce driver 3.13 from NVIDIA's website be used?

Actually, the question in the subject...
My problem is that the driver from MSI website is not supporting Russian properly; nForce drivers from NVIDIA ver. 2.xx did not work properly; can I use 3.13 driver?

this text could be find on the download drivers section
Quote
platform / nforce drivers
http://www.nvidia.com
i think that include your motherboard to.
im using 3.13 with no trouble but i got a different motherboard than you.

Nvidia nforce driver Vs Standard Kernel driver modules

Has anyone compared the drivers for nforce chips?
im currently using the in-kernel drivers and am not having in trouble.. with the exception of the crappy onboard sound chip that doesnt have a hardware mixer..
im wondering if switching to the nforce drivers might help with the sound.. or provide any benefits at all, be it speed / stability / etc.

I had problems with the kernel audio driver giving me static filled output, plus the software-only mixing problem. Word is that nvidia won't share enough of their hardware secrets with the ALSA devs to allow proper hardware mixing. I also never was able to pin down the static problem but it did not occur with the nvidia OSS modules, so I must assume it was a problem with the ALSA driver. I finally switched to a Via chipset because I needed ALSA and had a spare Via KT880 sitting around. Everything works greats on this board with included ALSA modules, including hardware mixing.

NForce driver install problem

I downloaded the nForce XP 2.45 drivers. When I double click on setup, the nVidia logo pops up with the progress bar reading "NVIDIA nForce Drivers Setup is preparing the InstallShield Wizard, which will guide you through the rest of the setup process. Please wait." When the blue bar goes to the right and finishes, it just stops. The nVidia logo and the progress bar disappear and nothing else happens. No install, nothing. Any insight as to how this can be fixed will be greatly appreciated. Here are the specs of my computer:
AMD Athlon XP 1700+
MSI K7N2 Motherboard
Envision 910e 19" Color Monitor
Windows XP Professional Edition
128 MB DDR GeForce4 Ti4200 Video Card
1024 MB PC2100 DDR SDRAM
40 GB 7200 RPM Western Digital HD
Lite-On 16X DVD ROM
Lite-On 24X10X40X CD-RW Drive
VIA AC'97 Audio Card
Teac 1.44MB Floppy Drive
NVIDIA nForce MCP Networking Adapter
Toshiba Cable Modem with AT&T Broadband Internet

Thanks for your responses. You brought some things to my attention that I forgot to include in my original post. 1) This is not a new build. I just want to update my drivers 2) I am reluctant to delete my old drivers for fear that I might not be able to reinstall them. And now, the driver CD that came with the motherboard is experiencing the same problem. 3) Restarting the computer did not help. I don't think the file is corrupt since now I am experiencing the same problem with the CD. Are there any programs/services/etc. that could cause this problem if disabled? And the Detonator drivers install fine. I'm really stumped.

New nforce driver v2.03 performance compared

So how did the new driver v2.03 (with detonator 41.09)compare against the older version 2.0 (with 40.72 detonator)?
Any performance gains in 3DMarks, PCMarks, Sandra or UT3 Benchmarks??
Any improvements in Audio quality/performance?
Any new features in general?...
State here your results 8o

after doing memtest 3.0 (passed)during the boot I received 11 of the same errors, in event viewer I read
An error was detected inDeviceHarddisk 0 during a paging operation
then another error the deviceScsi
videsm1 did not respond within the time period.
I noticed that I had no mouse at first windows screen
when I usually would with the original Ata drivers loaded???. Hmmm
I did notice a slight gain in my HD speed program in the burst rate and gained only 50 pionts in 3dmarks 2001 SE
I may use my backup to revert to the original drivers and if I still receive the error I will exchange my new device 0 hard drive Maxtor 120GB IDE ATA 133 8 MB cache.
it did not over write my 40.72 drivers though????

NForce driver 6.11 BETA

Similar Messages

Maybe you are looking for