[nForce] K7N2 delta ILSR sensors settings

hi i installed speedfan and i was surprised how many sensors are activated on this board. i have 8 active temperature sensors. and my question: what means all this temperatures? in program there´s only chip name. can anybody help me? thank you

Hi!
Usually there is only two temp. sensors on a motherboard. One is for the CPU, and is integrated into it. The other is for the northbridge. BIOS can report voltages also, and some programs read that too. Some cases/cabinets also have separate sensors.
Why not tell us the list.

Similar Messages

  • [nForce] K7N2 Delta-ILSR ...did i kill my motherboard??????

    ok i have K7N2 Delta-ILSR and i moving my computer from my bedroom to my basment because of construction and when i went to plug my computer into my apc powerbar the plug didnt go all the way in the socket and then a flash of electricty, when seeing this i wasn't sure what to think so i went ahead and pluged it into the powerbar socket next to it, then when i hit power button on my computer it gets power but wont post and the D-Bracket that came with my board that has diagnostic LEDs is saying " Memory Detection Test " i tried changing my stick of ram(Samsung PC3200 512mb DDR400) from all the slots and the same results then i tried a stick of corsair ram and the same results. I also tried clearing cmos, and having my settings on safe mode.
    Specs - Thermaltake Xaser III 480w, eVGA 6800 128mb, athlon xp 2800+ 333mhz, samsung pc3200 400mhz cas 3
     

    Do you have a different power supply you can test?
    You did unplug the power supply before clearing the CMOS right?
    Have you checked the stickies? Especially this one? https://forum-en.msi.com/index.php?topic=64248.0

  • [nForce] K7N2 Delta ILSR? is my computer specs outta date as today? or should I build a..

    IS MY COMPUTER OUT OF DATE?(MSI K7N2 Delta ILSR) (hint: look at my signature),  and if it is can someone make me a good list of things to get to make a new GOOD custom computer? motherboard etc,,, for a gaming pc under 500 US dollars?

    Outdated for what? What pushes you for an update? Your system will work fine for most things for a couple of years still. I'd remove that extra 128 MB stick though.
    The newest games is relying heavily on the graphics card. I don't know that processor, but that will cope with today's games for sure.

  • [nForce] K7N2 delta ilsr doesnt post

    I am using this mother board with ati radeon 9000 for 2 years. Today i bought a new msi rx9550 video card
    I installed it and power up but it didnt post
    no signal and no boot
    i put on the old radeon 9000 and i booted without any problem
    new 9550 works fine on another computer with old psu
    any suggestions ?

    no signal no post
    fans spins hdd and power light are ok
    i tried it with a good psu today no way it doenst post
    i also updated the mobos bios with modded bios version which i found in this forum
    i tried with asus and sapphire 9550 cards and no boot again
    but it boots with radeon 9000
    i also tried a cooler master psu with 18A 12v rail but nope
    it does not post with any radeon 9550 cards
    i removed all psu connections to hdd dvd ect and  only let mobos connection
    no boot again
    in the bios agp voltages seems to be shift between 1.5 1.6 and 1.7
    no 0.8 for agp 8x
    might it be a problem?
    I am realy disappointed with this mobo 
    i bought it 2 years ago because i tought this mobo can be used for long years 
    heh
    I am desperetaly seeking your suggestions 
    my computer:
    msi k7n2 delta ilsr mobo
    2x256 oem ram
    80gb seagate sata
    40 gb seage ide
    64mb ati radeon 9000 video card
    amd athlon xp 1800+ cpu
    msi  dvd rom
    nec dvd writer
    and an psu with 4pin 12v rail

  • [nForce] K7N2 Delta ILSR - Do i have to have raid with sata drive

    Hi guys,
    Probably a really stupid question, but here goes
    My machine has 1 ide HDD and 1 SATA HDD.
    The SATA drive is set up as raid0 and is purely used as a data disk. The OS(win xp pro sp1) is on the IDE drive
    The only way i could get the SATA HDD recognised by windows, was to set up a raid array with just the 1 disk.
    Pretty useless raid array i know.
    Did i have to do this or is there a way to have the sata hdd usable without having to set up a raid array
    Thanks
    John L
    MSI K7N2 DELTA ILSR
    ATHLON XP 2500 Barton
    2X512 MB PC3200
    Leadtek GF4mx460
    WD 8MB CACHE 80Gb IDE
    Samsung 120Gb Sata

    you have to do it for the controller to work
    but it has no effect on the drive
    you can move a regular drive on ide 3 back to a normal ide and its all fine

  • [nForce] K7N2 Delta -ILSR Fan that read "MSI AGP 8x" broke.

    My fan had made some noises throughout the week but it seemed when i turned the computer off and then back on it would stop I checked inside and it was working perfectly today it made a outrageously loud noise like it was about to blow up and sure enough it stopped working.  If your not sure which fan it was, it was the fan located on the motherboard directly that was the smaller one with a purple label and words that were outlined in silver reading "MSI AGP 8X."  Any help will be appreciated!    Should I get a new motherboard?  Is their away I can fix the fan?  Can I buy a new fan?

    Quote from: IronCatt on 02-October-05, 10:52:54
    Vantec Iceberq; cheap, quiet  and effective.
    Yes

  • [nForce] K7N2 Delta ILSR 1gb kit problem

    I recently changed my memory from two Kingmax 256mb memory modules to a Geil 1gb kit. I was surpwised to find out that my system wasn't stable anymore. It restarted after only a few minutes of playing NFS Most Wanted. I tried running Memtest86 and it found lots of errors. Same was with Prime95's torture test witch stopped after less than a minute. I blamed the memory modules cause my previos modules worked flawlessly in both tests. First i tried leaving on just one of the two geil memory modules. It worked just fine. I tried the other module and it worked also. But together it dosn't work even if i put them in sigle channel mode (first and second slot). I went and tried the kit in another dual channel machine. Tested with Memtest86 -- ok. I thought it was some kind of incompatibility between the board and the Geil memory modules so i tried another two 1gb memory kits (one from Gskill - 2 3 3 6 and one from Twinmos 2.5 3 3 8). They all gave me the same kind of errors in test #5 of Memtest86 exactly at the same time (when reaching 95% of the test). I'm beginning to think that the board doesn't support more than 512mb of ram even if the manual says 3gb max.
            Can you help me, please?

    Quote from: Djibrille on 04-December-05, 02:51:32
    Do you know of any problems I can get by running this high VDIMM for a long period of time? I woudn't whant to burn my kit for I intend to keep it when I upgrade my system. That will be when I can get a Athlon64 X2 and mobo (MSI or DFI Nforce4) at a resonable price (this means next year probably).
    no.. you are nothink about worry.. its 100% safe. this memory can handle 3.1Vcore...(still working wihout any problems,got a 4 machines with same memory at 3.1V running at 24/7 for 4 mouths) without special cooling..
    2.8V is nothink for that memory   im glad that my BIOS solve your memory problem. and "CPU upgraide for free" : wrote: "I definently have your bios loaded but instead of 32 bit cpu XP3000 I have shown 64 bit 3000. Cheap upgrade!" 2hits with one  

  • Nforce K7N2 delta-ILSR

    What does the AGP clock Value do if I increase it above normal 66?
    Sorry if this sound stupid but I'm not under standing how it works  

    and it will not increase the speed as your gfx card is agp8 and motherboard is agp8 capable too.
    if it was agp2 or agp4 it could give alittle.

  • K7N2 Delta-ILSR BSOD

    Hi
    MSI Nforce K7N2 Delta-ILSR
    Bios V1016
    Antec True380SPGB True Power 380w
    AMD Athlon XP2800+
    2x512mb Crucial DDR
    1xSATA HDD
    Abit Siluro GF4 Ti4200
    I've installed 1 SATA onto the onboard Raid controller, but I keep getting BSOD when either playing a game or watching avi's.  The 0x00000000 message is disappearing too quickly to right down but is saying windows was shut down to prevent damage to the hardware.
    Will the K7N2 Delta-ILSR Promise controller work with just one SATA hdd connected, I know that the silicon image controller on my Asus A7N8X-E will support just one SATA connected but will the promise chipset.
    I've updated all the drivers but the dreaded BSOD keeps happening.
    If it won't it not's a major problem as I do have a PCI sata controller card I can install.
    Or are there any issues with the above graphics card and the MSI mobo?
    Thanks for any help.

    Yep I've created a array with the single SATA and got Windows installed.
    I've also changed the memory settings so they are now 1:1 with the FSB.
    I've also altered the advance settings so I'll be able to write down the full 0X00000000 string.
    Just set net access up via my PC and got this error report from M$
    Error Message: STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER (Q293078)
    Error Caused by Graphics Device Driver
    Thank you for submitting an error report. Microsoft is unable to determine what specifically caused the problem you reported. To troubleshoot the problem, please see the information listed below.
    Analysis
    A device driver installed on your computer caused the problem, but we cannot determine the precise cause. Depending on which situation is applicable to you, please do one of the following:
        * If you are running Windows Server 2003 you may experience crashes if you have adjusted the Hardware Acceleration setting. Microsoft recommends that you set the Hardware Acceleration setting to None for server systems. To check your Hardware Acceleration setting, go to the Advanced section of the display properties dialog box.
        * If you know the manufacturer of the device, contact the manufacturer's product support service for assistance.
        * If you don't know the driver's manufacturer and need help diagnosing and resolving this problem, contact your computer manufacturer's product support service.
        * Updated drivers might be available on the Microsoft Windows Update website. At Windows Update, you can have your computer scanned and, if there are updated drivers available, Windows Update will offer a selection of drivers that you might be able to use. To learn more about updated drivers that might be available, visit Microsoft Windows Update.
        * For information about Microsoft support options, visit Microsoft Product Support Services.
    I've downloaded the current graphics card drivers from Abit and I'll install them and see what happens.
    I've also adjusted the AGP in the bios from 64mb to 128mb.

  • Need help with jumper settings for k7n2 delta ilsr

    I have a k7n2 delta ilsr and I'm using a AMD 2800+ barton 333 fsb. I'm not sure what the jumper settins are for this cpu. The users guide only shows 133/166 and 200, can anyone help me with the jumper settings.
    Thanks, Ron.

    Hi,
    As your processor is 333FSB - the jumper should be set to 166FSB as should the BIOS. As your RAM CPU combination runs at 2x166=333 or thereabouts.
    Basically, as a general rule, if you halve the FSB speed of your processor you'll get the setting for both BIOS and Jumper. 200FSB=100, 266FSB=133, 333FSB=166 etc. etc.
    Axel  

  • MSI K7N2 Delta-ILSR Nforce2 (Socket A) Motherboard (MB-003-MS) Features NF2 chip

    I tried to install 3 of the Crucial Ballistix Tracer (1 Gig Each) in this motherboard (MSI K7N2 Delta-ILSR Nforce2 (Socket A) Motherboard (MB-003-MS) Features NF2 chipset) and it will not run stabilly no matter what I tried. Is this a bios conflict with the memory? If so, are there any new bios updates? I have tried cas settings and voltage settings but nothing works. It will how ever run perfectly with only 2 sticks in single channel mode. It will not run same 2 sticks in dual channel mode. Anyone have any ideas? Anyone know of any new motherboards with maybe NFORCE 4 Chipset that support all 3 sticks of this memory and an AGP graphics card? Im thinking of a new motherboard but I still need to have AGP and SATA.
    Barton 3200 core proc.
    System has ran fine for a solid year until I tried new memory. Please help!

    Quote from: freakytiki4u on 07-November-06, 23:42:33
    Ok I tried to use relaxed FSB by -10 and relaxed mem timings but still unstable due to the motherboard trying to use dual channel memory. If you can modify the bios to where it will not have the capability of dual channel memory I truly believe it will work. Will u try this for me? I would greatly appreciate it as I am really not ready to spend all the money on new equipemtn when this suits my needs for now.
    sure but as i said before this is gona be experimental and risky. Here we go:
    MSI K7N2 Delta ILSR Experimental MOD E1(Disable Dual CH ability)
    Procedure is automated in best possible safest way to BIOS update.
    Prepare a blank diskette in a good condition(newest one etc.)
    ]execute file under XP will make bootdisk with automated BIOS update procedure. when diskette is ready, reboot PC and boot from FDD(floppy), wait a bit, then you will be asked for final confirmation about BIOS update process, press a key to proceed, after BIOS update is complete, ensure that you got successfully output message from flash program. then power down your PC, remove power cord from the PSU, hit power button several time to drain caps electrify, touch with hands some metal for ES discharge, and Clear CMOS.
    pull back power cord, power up your PC, when you see CMOS checksum error,(expected msg) hit F1 to continue to re-build DMI pool data, then reboot and enter in BIOS, LOAD BIOS DEFAULT, and SAFE AND EXIT.
    NOTE: Ensure your PC is stable before proceed with BIOS update.
    NOTE: Use it at own risk, chance of failure is big, cannot guarantee results and safest as provisional mode which can guarantee it will work stable with features. also cannot test it personally before give you. (don't have mobo anymore)
    Using it may end with dead mainboard (BIOS chip re-flash will be required, if somethink goes wrong)

  • K7N2 Delta-ILSR + FX5700-256td = PC Shudown and Lock

    i play a Doom 3 demo or Morrowind and in the short while to be playing the computer it is extinguished
    MSI K7N2 Delta-ILSR (v7.8 Bios)
    MSI FX5700-256td (last bios)
    AMD Sempron 2600+
    512 DDR
    300W power
    WinXP SP2, Suse Linux 9.1
    all patch´s and last drivers for all OS
    I look the 8X AGP dont work...
    4X Agp works... Im proving now

    AMD Athlon Sempron 2600+
    MSI K7N2 Delta - MS-6570
    MSI FX5700-TD256
    System BIOS : 08/02/2004-nVidia-nForce-6A61BM4CC-00
    Memory: 512MB 16x(32Mx8) DDR-SDRAM PC3200U-2533-600 (CL2.5 up to 200MHz)
    HD: 80G SATA
    Voltage Sensor(s)
    CPU Voltage : 1.55V
    Aux Voltage : 1.63V
    +3.3V Voltage : 3.25V
    +5V Voltage : 5.03V
    +12V Voltage : 11.98V
    -12V Voltage : -12.03V
    -5V Voltage : -5.15V
    Standby Voltage : 4.97V
    AGP Bus(es) on Hub 1
    Version : 3.00
    Speed : 4x Fast-Writes Enabled : No
    Isochronous Mode Enabled : No
    Addressing Enabled : 32-bit
    Aperture Size : 128MB

  • Internet Connection Problem on MSI K7N2-Delta-ILSR

    Hi, recently I buy an MSI K7N2-Delta-ILSR.I have a problem when I was trying to connect to the Internet through my modem on WinXP Pro SP1. It bring me up an error message 678 ( The computer that was tried to connect did not respond...). I have also a second hard disk with Mel windows. On disk the disk with the Mel I don’t have any problem with the internet connection. All my settings are same on WInXP pro and Mel.I have checked I thousand times. My computer configuration is:
    Athlon XP 2400+ Overclocked to 2205MHz
    2 memory modules of 256MB 400 manufactured by Samsung
    TharmalTake Volcano 11
    Triplex Xabre 400 PRO with 128MB
    Hercules Gamesurrround Fortissimo III 7.1
    Microcom InPorte Home modem 56k
    Leadtek winfast 2000 (TV/FM radio)
    Acard SCSI controller (Acard AEC-6710D) for my scanner
    WesternDigital WD800 GB
    WesternDigital  15.3gb
    Bios ver.7.4  
    Can anyone help me?

    Quote
    Originally posted by Roger Wilco
    Hmmmmm, I\'m also having a problem with the onboard lan of the K7N2 Delta.
    I have an ADSL connection, and have an Alcatel SpeedTouch Home modem.
    I pretty much get the same error as SiliconMan (The computer that was tried to connect did not respond...)
    I ended up giving up on it for the time being, just using my SMC NIC. Would be quite interested in finding out what the problem is though.
    Anyone else in the same boat?
    Hi,
        Your problem is not the same, SiliconMan is trying to connect with a dial-up modem not LAN. Your problem sounds like it may be configuration, do a search on this post, I'm sure you will find people with onboard LAN troubles. It's hard to troubleshoot though since you didn't provide any info about your computer. Good Luck  
    Rob

  • Data corruption on MSI K7N2 Delta ILSR

    Hi all,
    Just got my new MSI K7N2 Delta ILSR up and running.
    Got some issues with the memory running at 200mhz while the Barton core of my Athlon Xp 2600+ was running 166mhz, this had to be 1:1 (thx forum  )
    While running the default bios settings with cpu/mem at 166/166 fsb everything is stable as hell. I have been running Prime95 for 2 days now and using the system for dvd ripping/encoding, UT2004 gaming etc.
    Then the overclocking began   I'm using the standard AMD cooler that came with my boxed Xp2600+ so I didn't expect an FSB of 200mhz.
    I stopped at an FSB of 190mhz...been crunching Prime95 for 18 hours now and again very stable.
    Now comes the problem : Sometimes I get crc errors when installing a game or decrypting a dvd!! But how can this be? Prime95 is stable at this 190fsb overclock.
    When using an FSB of 166mhz no data corruption or crc errors.
    What can this be? It's not the cables because they're all the same as in my old setup which was running (ahum...walking) stable. PCI/AGP speeds are locked when overclocking...
    Only thing I can think of is the power supply. I've read in a warning post from Bas that the Q-Tec 550w psu I have is crap. So my guess is PSU, but maybe it's something else I'm forgetting...Any suggestions??
    The stupid thing is when I'm not overclocking I don't have the data corruption problems, but I'm still using the same crappy Q-Tec 550w PSU.
    Help!  
    gr,
    Remco

    Hmmm, that's curious. On the MSI K7N2 Delta ILSR product page Kingston memory is recommended  
    Ok, did a Memtest86 v1.11 pass at cpu/dimm 166/166 - no problems whatsoever. I think using Prime95 would have revealed memory problems...but will do another pass with cpu/dimm at 190/190.
    Can overclocking affect the Promise Raid Controller?? It should be locked like the PCI/AGP but who knows...
    Well, I still have to replace my PSU but I'm not 100% sure that this is the problem. What PSU would you recommend? ...and I'm also thinking about replacing the standard CPU cooler, any advice is welcome  
    gr,
    Remco

  • Msi k7n2 delta ilsr problem

    hi i have this configuration on my pc:
    antec true control 550 watts
    msi k7n2 delta ilsr
    kingston hyper x pc3700 2x512 mb
    athlon xp 3200+
    seagate 120 gb sata 7200.7 hd
    ati radeon 9800 pro excalibur ice q
    i have 2 problems : the first one is that sometimes windows display me a blue screen with certain problem related to ati2dg.dll i think that problem is beacause the video card so i decided to update the bios , in the live update page from msi says that the bios 7.6 fix a bug with ati vga cards but after flashing and updating to bios v7.6 that blue screen with the same error still appearing so i dont know what else to do to solve the problem and the second one is that when i start any game or make the processor to work a little mostly related with video stuff the case speaker start to beep and the pc lags until he restarts with no reason i really dont know why if u can help me thank you

    Foxtrotccs,
    In the BIOS try setting the AGP to 4X and disable Sidebanding. Then set the AGP Apeture to 256. See if that helps.
    Make sure you are running the lastest   nVidia nForce Drivers and the latest ATI Catalyst Drivers
    Take Care,
    Richard
    P.S. There is still a possibility that the Kingston RAM is the problem.

Maybe you are looking for