[nForce] k7n2g-l audio problem
my onboard audio make a strange noise on right front painel, i'm use 4 chanels audio this noise is insuportable, very high i'm try others drives but nothing, try look for interference and nothing. some help?
the problem is the same in the front and back panel, I already changed the plug's and equal, the sound that leaves in the front right channel in the green plug continues this altered as if it was higher, I made some tests and when I watch tv for the card of capture "lifeview fly tv 30" that is mono the sound is ok,!!! How I identify problem in the hardware????
Similar Messages
-
For some reason I cannot get the Dolby Digital Encoding or even Digital Out working. I've got my system connected to a Dolby receiver with a coaxial cable, but i get no output when I select digital. The speaker output levels show that audio is playing, but I dont hear any of it. My receiver works fine if I connect it to an Audigy or a DVD player. I'm using Winxp with all the latest audio drivers. Any help would be great. Thanks
Reinstall them according to the link I provided in my last post...
If you're using the K7N2G-IL board then follow this link to install the proper drivers for your sound: Realtek Driver Fix
Cheers!! 8) -
Audio problem? with K7N2G-ILSR board
I have recently built the following machine :
Motherboard : MSI K7N2G-ILSR
Processor : AMD 2200
Memory : Kingston 2 x 512MB
Hard Drive : WD 80GB
OS : Windows 2000 SP 3
The problem is if the on-board audio is enabled, the system either blue screens with a STOP error where it can't find the audio system file ( which exists ) or if it does boot into Windows, explorer.exe will crash. I have to go into Task Manager to start explorer.exe in order to see my desktop.
If I disable the on-board audio, no problem what so ever, but of course this is not a solution I want to live with.
I have tried to troubleshoot this myself : taken out a stick of memory, switched memory, updated the drivers to the latest, etc.
Also another thing to note, when I finally don't blue screen, the Windows 2000 System event log will have 10-15 of the following error messages, "The driver detected a controller error on \Device\Harddisk0\DR0".
I have told all of this to the MSI Support and they think it is either memory or a bad board not the drivers. I have also burned in my system and no problems were discovered.
Any help?
Thanks,
WayneYes, I have tried with SP2. Currently I am using SP3, though. I am also using Bios 1.3
Here are my IRQ assignments.
IRQ Number Device
1 Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
3 Communications Port (COM2)
4 Communications Port (COM1)
5 NVIDIA nForce PCI System Management
6 Standard floppy disk controller
8 System CMOS/real time clock
9 Microsoft ACPI-Compliant System
12 PS/2 Compatible Mouse
13 Numeric data processor
14 Primary IDE Channel
15 Secondary IDE Channel
16 NVIDIA GeForce4 MX Integrated GPU
20 Standard OpenHCD USB Host Controller
20 Standard OpenHCD USB Host Controller
20 Standard Enhanced PCI to USB Host Controller
20 NVIDIA(R) nForce(TM) MCP Audio Processing Unit
(Dolby(R) Digital)
20 NVIDIA(R) nForce(TM) Audio Codec Interface
20 OHCI Compliant IEEE 1394 Host Controller
I have disabled the Raid in the device manager, otherwise that came up IRQ 11.
I guess I spoke too early about not crashing, this morning it took about 6 reboots in order to finally get to a login this morning. I would get a STOP error about not finding the audio driver. -
UT2004 Audio Problems with Audigy 2 ZS, X
I've been trying to play UT 2004 and am having some problems. Whenever I start a game, within 2-3 minutes the audio loops and the computer freezes. The only fix is a reboot. I had an Audigy 2 ZS installed, and was getting these problems, so I went and bought an X-Fi Music and installed it last night. Tried to run the game today, no luck, the exact same problem.
Would this be a problem with the Audio engine within UT2004, then? I've run other games (Call of Duty, Max Payne 2, original UT, etc) with no audio problems whatsoever.
One thing I would like to say is that music sounds absolutely incredible with this sound card. And, subjecti'vely, I think the games sound a ton better too, but the music processing is top-notch.
Thanks for any help! Here are my system specs:
Athlon 64 3000+ @ 2.6 gHz
DFI LAN Party Nforce 3 Ultra
Corsair XMS GB
BFG 6800 OC
Antec TruePower 430 2.0Just tried re-installing the game, I thought maybe the patches or my extensi've editing of the UT2004.ini file might have caused it. Nope, still the same.
The card is recognized in the Device Manager, onboard audio is disabled.
Could it be something with the OpenAL implementation? I've read bits and pieces about improper processing, etc- I tried replacing the OpenAL file with the one from the Creative Developer's website as suggested and there was no change. -
K7N2G-ILSR BSOD problems! please help
I just recently upgraded from a AMD 2400 to a 2800, the computer was getting alot of bsods then about memory reading so I thought it was just trying to address memory like it did with the old processor, so i re-formatted and i dont get the bsods as much anymore. Only thing is that games always crash and or the screen will go black in the middle of a game and the whole computer restarts, what could be causing this?
Is anyone else having this problem with the new ATi drivers or could this be something else?Ok I got this from system info
Heres Conflicts/Sharing:
I/O Port 0x0000A000-0x0000AFFF PCI standard PCI-to-PCI bridge
I/O Port 0x0000A000-0x0000AFFF RAID Controller
I/O Port 0x00000000-0x00000CF7 PCI bus
I/O Port 0x00000000-0x00000CF7 Direct memory access controller
I/O Port 0x000003C0-0x000003DF NVIDIA nForce2 AGP Host to PCI Bridge
I/O Port 0x000003C0-0x000003DF RADEON 9700 PRO
IRQ 20 Standard Enhanced PCI to USB Host Controller
IRQ 20 NVIDIA(R) nForce(TM) Audio Codec Interface
IRQ 21 Standard OpenHCD USB Host Controller
IRQ 21 NVIDIA nForce MCP Networking Controller
IRQ 21 OHCI Compliant IEEE 1394 Host Controller
IRQ 22 Standard OpenHCD USB Host Controller
IRQ 22 NVIDIA(R) nForce(TM) MCP Audio Processing Unit (Dolby(R) Digital)
Memory Address 0xD0000000-0xDFFFFFFF NVIDIA nForce2 AGP Host to PCI Bridge
Memory Address 0xD0000000-0xDFFFFFFF RADEON 9700 PRO
Memory Address 0xE7000000-0xE7FFFFFF PCI standard PCI-to-PCI bridge
Memory Address 0xE7000000-0xE7FFFFFF RAID Controller
Memory Address 0xA0000-0xBFFFF PCI bus
Memory Address 0xA0000-0xBFFFF NVIDIA nForce2 AGP Host to PCI Bridge
Memory Address 0xA0000-0xBFFFF RADEON 9700 PRO
I/O Port 0x000003B0-0x000003BB NVIDIA nForce2 AGP Host to PCI Bridge
I/O Port 0x000003B0-0x000003BB RADEON 9700 PRO
I/O Port 0x0000C000-0x0000CFFF NVIDIA nForce2 AGP Host to PCI Bridge
I/O Port 0x0000C000-0x0000CFFF RADEON 9700 PRO
And IRQs:
IRQ 0 System timer OK
IRQ 3 Communications Port (COM2) OK
IRQ 4 Communications Port (COM1) OK
IRQ 6 Standard floppy disk controller OK
IRQ 8 System CMOS/real time clock OK
IRQ 9 Microsoft ACPI-Compliant System OK
IRQ 10 NVIDIA nForce PCI System Management OK
IRQ 11 RAID Controller OK
IRQ 13 Numeric data processor OK
IRQ 14 NVIDIA NForce 2(tm) SPP/IGP ATA Controller OK
IRQ 15 NVIDIA NForce 2(tm) SPP/IGP ATA Controller OK
IRQ 19 RADEON 9700 PRO OK
IRQ 20 Standard Enhanced PCI to USB Host Controller OK
IRQ 20 NVIDIA(R) nForce(TM) Audio Codec Interface OK
IRQ 21 Standard OpenHCD USB Host Controller OK
IRQ 21 NVIDIA nForce MCP Networking Controller OK
IRQ 21 OHCI Compliant IEEE 1394 Host Controller OK
IRQ 22 Standard OpenHCD USB Host Controller OK
IRQ 22 NVIDIA(R) nForce(TM) MCP Audio Processing Unit (Dolby(R) Digital) OK -
MSI K7N2G
ATHLON XP 2000 10x200 2004 by wcpuid
2X 256 MB PC 2700
I have a audio problem !!!!
I got the optional S-brachetdigital audio out for my MSI K7N2G motherboard and it works. The problem is that I can not get the Nvidia audio controles to work. I have updated the drivers and i still only have the standard windows audio controls.
Is this a motherboard problem or a driver?
I need some info on how to attack this problem.
With out this audio control i will not be able to set the controls for digital out.
P.S. I need digital sound
:O
ThanksHİ
ı solwed this problem with some help.
Please read http://www.msi.com.tw/program/service/forum/index.php?threadid=15467&boardid=14&styleid=1
Bye -
Of course, no one in this forum has had the audio problem that I have, so here I go.
I just installed the Neo2 Plat. Only card im using is the video card. I get no audio. I use the s/pdif ports only. I can use either the optical or coax, but i need to use one of those 2 only. The only way I can make my spkrs make a sound is by setting the spkr config to 7.1 and that only gets me sound out of the front 2 spkrs.
I have the Klipsch Pro Media 5.1 with their Dolby Digital Decoder. I have a 2nd computer hooked up to this, hence why I need to use a 1 cable audio solution. I know everything else works, b/c everything was working fine when I was on my Abit NF7-s, and the sound works fine from the other machine.
My audio source was not a 2ch source. I was using the auido test, and 3d demo test in the realtek software. If i choose the 5.1 setup, i get no sound at all from any spkr. but if i choose 7.1, when i run the tests, only the front left and front right spkrs get sound.
I havent tried the realtek drivers yet from their site, so far Ive only used the MSI provided drivers from live driver.
I have another problem, with the Gart driver freezing the system at the Win XP loading screen, but Ill save that for another post. But if u know what I'm talking about, and know a solution and/or forum link, feel free.Quote
Originally posted by Minivan
going to try the nforce beta drivers
going to ignore JER101 because is an idiot who doesnt bother to read a forum post b4 blurting out advice that basically calls me an idiot
Him
Quote
"The sound worked with my NF7-S". You have a problem! That has the soundstorm APU with hardware dolby digital encoder - hence 5.1 support from a single SPDIF connection. Havn't you heard of the complains about Nvidia ditching the soundstorm APU?
Me
Quote
My audio source was not a 2ch source. I was using the auido test, and 3d demo test in the realtek software.
will reply with beta nforce results
Did I call you an idiot? No! I was informing you of why you can't get 6 channels down a single SPDIF WITHOUT dolby (or DTS) encoding. As far as I am concerned this is a well know fact everyone accepted PRIOR to the arrival of the soundstorm APU. Selecting 6 channels and testing them works with the analogue outputs, just because the test is there dosn't mean Dolby encoding is present and you can get 6 channels down the SPDIF!
Here is a link where a solution to losing soundstorm dolby encoding is discussed:-
http://www.nforcershq.com/forum/viewtopic.php?t=53402&sid=
I know you won't read all of it since your convinced you don't have this problem (i'm the same when I'm convinced I'm right), so here is a link to the software which fix's the problem you don't have:-
http://acidbao.free.fr/isoft/dlpage.php?prog=DolbyOutDS
What, a solution to a problem you don't have! Yes, and if you havn't botherd to read this post you will have missed it! -
Audio Problem since upgrading to Mountain Lion
Has anyone encountered audio problems with their iMac? I just upgraded to Mountain Lion on my i7 27" with 16GB of Ram and found that the Audio starts to get distorted and eventually cuts out after about an hour! It starts cutting in and out when I move the mouse and eventually there will be no sound at all!
Sometimes it can take over an hour of steady use, my last time was watching a movie on Netflix. I initially noticed this using a USB DAC Headphone Amp.
I never had any Audio problems before, my machine is over 1 year old.
I enjoy watching movies in iTunes and DVDs, but this is making it difficult! A full restart usually fixes the problem for a time but it will eventually come back
I'm seriously thinking of going back to Lion for the time being and seeing if it is a Hardware problem.i don't know if mine is the same issue, but i had no sound through any of my applications after upgrading to mountain lion. here is what i had to do to fix it:
-- applications > utilities > audio midi setup > UNmute all options under "built-in output" (they were mysteriously muted)
Also, I noticed that the options for "use this device for sound output" and "play alerts & sound effects through this device" were no longer assigned to my Built-in Output device. They were assigned to some other random sound driver. To fix, i right-clicked on Built-in Output and reassigned those items to my built in speakers. All fixed now!
very weird problem, though. -
Can Apple fix the 12 bit audio problem once and for all?
I have had persistent audio problems from I Life V3 all the way up to I Life 06. Sometimes it is synch issues. Sometimes it is audio dropping out. I have been through the various forums and applied the various remedies with some successs, some failure. The basic problem is that I have an extensive quantity of Mini DV tapes dating back to 1997, most recorded with 12 bit sound (prior to 2002). Apple's basic stance has been, you must use 16 bit sound or I Movie and/or I DVD won't work and . And proposes awkward workarounds. Basically placing the onus on it's own consumers. Why can't 12 bit sound support be included in I DVD 06 and these persistent audio issues put to rest once and for all? Is there some overwhelming technical reason why it cannot be done?
I don't know about overwhelming, but the DVD specification (which was not developed by Apple) calls for the audio to be sampled at 16-bit/48KHz (I think you might also be able to use 96KHz as well). This is what the software expects. If you choose to use another sample rate then the software may or may not be able to "fix" it in post. The real problem is that many camcorder manufactures set the audio to 12-bit by default.
Mike -
HOW TO FIX NO AUDIO PROBLEM IN FLASH (4 SOLUTIONS)
This solution is for WINDOWS ONLY!!! Unfortunately I believe
it is a bug in flash itself as I have read more than one instance
of this same no audio problem occuring on MAC'S and LINUX based
systems as well. IF YOU KNOW OF SOLUTIONS TO THE MAC OR LINUX BASED
PROBLEMS, PLEASE POST THEM IN THIS THREAD.
Description of the problem: Video sites such as YouTube,
VideoSift, Break, Google Videos, Yahoo, and a plethora of others do
not stream embedded audio. Viewing a YouTube video, for example, on
VideoSift.com results in the video playing back with no audio.
However, by going directly to YouTube and playing back the same
video, it appears to work.
THERE ARE SEVERAL POSSIBLE SOLUTIONS.
Problem: You may be missing your WAVEMAPPER driver.
Cause: Wavemapper driver was removed during installation or
updating of the Flash Player. It might not necessarily be Flash
that removes it but apparently something does.
Solution #1: Google "Flash No Audio WAVEMAPPER" for
directions, its been covered a bunch, but basically requires
running REGEDIT and readding the WAVEMAPPER key to the appropriate
location and value in the registry. Its not as difficult as it
sounds.
http://weyland.be/wrdprss/index.php/2006/08/22/no-sound-in-macromedia-flash-player-9/
if your wavemapper key is installed correctly...
Possible Cause: Corrupted or damaged flash content preventing
audio streaming from working correctly.
Soltuion #2: Run CC Cleaner and delete only cached Flash
content. It is a free program, again just google "download CC
Cleaner". This particular solution worked for me.
If CC Cleaner also does not work, the description of your
problem may differ slightly. In my case on several computers, one
day it worked, the next day it didnt. If it never worked, this
would be a logical solution for you. One variation of this that I
have found is to create a new Windows User Account and log into it.
The reason the CC Cleaner method may work better is that the User
Accounts have their own separate cache folders so a corrupted cache
preventing audio playback on one profile will not be available on
the other User Account to cause the same problem. I wont explain
how to do this as the CC Cleaner will work better but if you are
curious, yet again google "create new windows user accounts". I
have also seen this method work on one of my affected computers but
it did not fix the issue on the account I was having problems with.
http://www.ccleaner.com Install
and run it, use it only to remove Flash under the Applications Tab,
Multimedia, Adobe Flash Player. Check it and uncheck everything
else, then hit Analyze then Run Cleaner.
Possible Cause: Missing Codec
Solution #2: Download and install the K-Lite Codec pack.
Again, google it. A CODEC stands for COmpressor DECompressor and is
a way to make audio and video files small enough to be transferred
on the internet. There are a lot of different codecs and if you
want to play back a video that was compressed using a particular
codec, you will need that same corresponding codec to decompress
your media source and view its content. Basically if you dont have
a codec, you cant observe the content of the media. If you have a
VCR and want to play back a DVD, you are out of luck unless you get
a DVD Player. DivX and XVid Codecs are some of the very popular
codecs used on the net, but to get those, I still suggest getting
the K-Lite Codec Pack.
http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm
Solution #4: Go back to Flash 7. If it aint broke dont fix
it. This Final alternative is only to be used as a last resort.
You'll have to get rid of Flash 9 and go back to Flash 7. The
really tricky part here is that you have to prevent Flash from auto
updating itself. If you install Flash 7, and hit up YouTube, you'll
immediately get Flash 9+ installed again with the same problems. So
AFTER you uninstall Flash 9 (use Macromedias / Adobes uninstaller,
yet again go google it) make a new text file and name it MMS.CFG,
in the file put this one line "AutoUpdateDisable=1" (without the
quotes) and put it in BOTH your c:\windows\system32 AND
c:\windows\system32\Macromed\Flash folders. This will prevent flash
from Auto Updating to 9+, then have to find some place to download
the old flash 7 installer. I found one here.
http://www.intercomm.com/downloads/Flash7.
Only problem is that most sites will try to make you install Flash
9 and Flash 7 does not work on all sites, but it does on some like
YouTube. DO NOT UPDATE TO FLASH 9+ IF YOU USE THIS METHOD.
You will probably want to IMMEDIATELY go to
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.htm l
after installing Flash 7 and UNCHECK the update feature
I've tried to write this quick little guide at 3AM so Im not
going to take more time to research other ways to fix this problem.
If you have other solutions, such as for MAC and LINUX, or feel
like adding on to something else that I've written here (links
would be useful to the downloads I suggested) or correcting any
mistakes I probably have made, please say so.
One of these solutions is bound to help you. Theres multiple
causes for this no audio problem so there is obviously multiple
fixes.http://www.omahapokernews.org
http://www.holdempokernews.org
http://www.7cardstudplay.net
http://www.5cardstudplay.net
http://www.holdemspot.org
http://www.texasholdemstate.net
http://www.texasholdemstate.com
http://www.pokerbonuslist.net
http://www.pokerdownloadz.org
http://www.signuppoker.net
http://www.tournamentpokerz.com
http://www.pokercalculatorz.com
http://www.omahaodds.org
http://www.omahaouts.org
http://www.texasholdemrulesonline.net
http://www.onlineholdemtips.com
http://www.pokerhilo.net
http://www.poker-hilo.com
http://www.hilopokers.com
http://www.nolimit-holdempoker.net
http://www.texasholdemlimits.org
http://www.texasholdemlimits.net
http://www.onlinepokerlimits.org
http://www.onlinepokerlimits.net
http://www.onlinepokerlimits.com
http://www.texasholdemlimits.com
http://www.7cardplayer.net
http://www.5cardplayer.net
http://www.omahaacademy.org
http://www.omahapokerrooms.net
http://www.onlinepokerroomstop.net
http://www.playpoker-toppokerrooms.com
http://www.texasholdemz.com
http://www.playpokeronline-casinos.com
http://www.texasholdem-vip.com
http://www.gamble-poker-holdem.com
http://www.playpoker-holdem.com
http://www.onlinetexasholdem-poker.com
http://www.texasholdempokeracademy.com
http://www.vip-texasholdem.com
http://www.playfree-poker-online.com
http://www.texasholdem-pokerrooms.org
http://www.toppokerrooms.ws
http://www.toppokercasino.ws
http://www.onlinepokercasino.ws
http://www.playpoker-online.ws
http://www.online-texasholdem.ws
http://www.play-texas-holdem.ws
http://www.internet-texas-holdem-poker.ws
http://www.poker-player.ws
http://www.luckyschool.com -
VGA problem with FiFA 2003 and Audio Problem with NHL2003
i use onboard VGA
800 x600for both games
with no problem
but for Fifa 2003
the screen looks so dark...
all players look like a black people(all black color hair
and black face))
some audio problem with NHL 2003...Have you tried the following?
Adjust monitor settings? i.e. contrast/brightness
Video settings within the game? Some have gamma or brightness settings.
Gamma correction in "Display Properties"?
for starters anyway...... -
Audio Problems in Adobe Presenter: Help Needed Urgently!!
I am using trial versions of Adobe Presenter 7 and Adobe Connect 8.
I created a presentation in in Powerpoint 2002 and published through Adobe Presenter to Adobe Connect Pro. This presentation has voice over recorded through the Adobe Presenter "record audio" option.
In Adobe Connect Pro, I created a meeting and shared the above mentioned presentation through the "Share Document" option in Connect Pro.
Now, when I play the presentation in this Adobe Connect Meeting, I am not getting any audio that was recorded in Adobe Presenter. Whereas if I play the published presentation directly it plays the recorded audio.
Can anyone help me on this?
1. Are there any settings to be done in Powerpoint or Adobe Presenter or Connect pro?
2. Is it the problem of Trial Account or something like that?
Please let me know the solution. Need to work on this ASAP!!!
Thanks in Advance,
YoginiThis is a weird one. If you created a prezo with audio and published it to AC (Adobe Connect) and everything worked fine on your desktop then it should work fine in AC i.e. there are no other settings required on AC's side, it should just play.
As I am typing this I thought of similar audio problems that we have experienced in the past. A big one would be where another user created a PPT on their laptops and handed it to us. When testing the audio did not work. Reason being is that not all the files were coppied over BUT I must accept that this is not your problem as it definately worked on your PC before you published it to AC.
Wait there is one setting in the publish settings. In the output options tick "Upload source presentation with assests", then tick audio.
I cannot think of anything else. There is a man called Heyward Drummond on the Adobe Connect General forum, who is a real master at answering queries like this. Why not post your query there and see if he comes up with an answer? -
I have tried making disc image, burning disc and the audio will pause for second several times in the play back. It does not do it when playing back in iDVD.
The slide show was started in iPhoto and sent to iDVD. I have started over several times and still same issue. Makes a bad impression and is really not useable for presentation.
I have 30 gigs free space, changed settings to Professional encoding and still same issue. I have no open apps, changed all energy settings and screen saver to never.
Any ideas, I am fresh out, never had this problem with previous version.
FrustratedAndy,
This question is really in the wrong place - this is the iDVD '08 forum and not the iDVD 5 forum.
From the description of your problem using Toast, it sounds like you didn't actually export a DV video movie out of iMovie.
Export a DV video movie out of iMovie (it will run 13 GB per hour) and play it back with the QuickTime Player to see if the audio settings you made are really there. If this movie plays OK, you can bring IT into iDVD or Toast for turning it into a DVD.
If the DV video movie you created STILL has audio problems in the QuickTime Player, ask you question about THAT issue in the correct iMovie forum.
F Shippey -
IMovie audio problems when burning in Toast 6
Hi,
i've tried to burn an imovie project in idvd 5 but i get 'the error #-1 was reported' like most people have been and i've tried loads of things suggested to fix it with no joy.
I then sent the imovie project to toast titanium 6 where it burned fine. However, when i watched it i noticed that although toast had picked up all the audio (both dv audio and aiff), it did not pick up all the volume adjustments during the movie. how annoying! for example: i have an aiff clip that fades into a movie clip with the sound gradually going down but Toast picks up the sound staying at the same level. this also happens with volume adjustments in a DV file.
Any suggestions why this happens / how i can fix it?
Cheers,
AndyAndy,
This question is really in the wrong place - this is the iDVD '08 forum and not the iDVD 5 forum.
From the description of your problem using Toast, it sounds like you didn't actually export a DV video movie out of iMovie.
Export a DV video movie out of iMovie (it will run 13 GB per hour) and play it back with the QuickTime Player to see if the audio settings you made are really there. If this movie plays OK, you can bring IT into iDVD or Toast for turning it into a DVD.
If the DV video movie you created STILL has audio problems in the QuickTime Player, ask you question about THAT issue in the correct iMovie forum.
F Shippey -
Any Bluetooth audio problems since upgrading to ICS?
Hi.
Was wondering if anyone has had any Bluetooth audio problems since upgrading to ICS? In particular, have you had any stuttering and/or pauses in streaming since the upgrade?
I use a MW600 with my phone and I get stuttering and pauses every few minutes between the phone and the MW600 which is very annoying - to the point where I can't reliably use the phone for audio any more.
Thanks
SavcomSorry but it seems to be a problem some users are experiencing. It's already been reported so hopefully there will be a fix for this soon.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.
Maybe you are looking for
-
How to delete albums on Ipad 1 OS 7
WHy don't we have. Easy option to delete Albums on Ipad 1 running on OS7? Have bahted houthto findout ow still no joy
-
How to disable Quick Launch on Pavilion dv8t-1100
The Treble keeps fluctuating, and the wireless connection keeps randomly turning off. I've already tried disabling it through msconfig, and uninstalling the drivers. No dice. I'm pretty sure this is a hardware issue. I honestly don't care if my warra
-
After instaling the update for OS yesterday (saturday 7.10.2012) my macbook pro will not start. The instaling proses start but stopp after 2-3 minutes. I have started mayby 10 tims know but it stops every time. Help, its just a monts ago my iMac hard
-
Is there a linear equation VI that I can use for inputting the coefficients with variables attached to them? I am currently studying elec engineering and am in the thick of transient analysis. It is very time consuming figuring the mesh and nodal ana
-
Abort System error in program CL_RSDM_READ_MASTER_DATA
Hi Gurus, I had a user who was trying to run a query and they got this error msg: "Abort System error in program CL_RSDM_READ_MASTER_DATA and form_sidval_direct" I went to RSRV and tried to repair Master Data objects, I came up with this error only